All items in ECC not replicated in SRM
Hi friends,
Currently we are working on SRM 5.5 as an addon to ECC 6.0.When we set up the SRM development system there were a few materials in ECC.We used the transaction MDS_LOAD_Cockpit to replicate first the material types,then the material groups and finally the materials.But it was observed that some materials dint get replicated.Later on whatever materials we have created in ECC are getting replicated automatically since we have scheduled some programs.
When i did try to manually replicate those materials using transaction MDS_LOAD_COCKPIT it was giving me an error " Base category not assigned to product" but we already have the material gropus replicated.How do i replicate those materials in SRM now.
Regards,
Pawan Agrawal
Hi Pawan,
Check for the filter settings for material in SRM using R3AC1 & R3AC3 T.codes and then replicate the material using R3AS T.code (Initial upload) / R3AC4 for delta upload.
Also check all the tables required to be maintained for Master data replication in both R/3 & SRM.
CRMCONSUM, CRMSUBTAB, CRMRFCPAR, CRMPAROLTP in R/3 & SMOFPARSFA in SRM.
The problem looks to be with filter settings for material as the other materials are getting replicated. Please check all the settings for master data replication carefully.
Hope this will solve your issue.
Award points for suitable answers.
Clarifications are welcome.
Rgds,
Teja
Similar Messages
-
One new vendor created not replicated in SRM from ECC .why
Hi all
once in a moon vendor replication wont happen for certain new vendor so we edit xk02 and next vendor sync job it will be available in SRM but this time i hammered a vendor many times still not pulled into SRM . other new vendors created fine.
any restriction stopped you any clue is appreciated.
I can pull it in different way.but i want why some times sync job failED TO TRANSFER long name vendor more than 38
MuthuHI Deva,
I am also facing similar kind of issue. where Vendor get updated in the BUT000 but not get updated in BBPM_BUT_FRG0061.
When i am running the MDS_LOD_COCKPIt. It is showing me Error Message as BP number Already Exist.
Kindly Suggest me Process, how to update the Table BBPM_BUT_FRG0061.
Qucihk reply will be highly appreciated.
Thanks
KHATRGA2 -
Confirmation posted in SAP not replicated to SRM
Hi All,
We are having Extended Classic Scenario here. For a PO created in SRM, user has posted goods receipt in back end system(R/3) in the month of december 2013 but yet system has not replicated that as a confirmation in SRM. I ran BBP_GET_STATUS_2 where it shows "1 shopping cart item has been excluded ( due to ext.po status)", but sytem replciates successfully for other PO's. I ran Clean_ReqReq_up also, but no use.
What may be the reason? please clarify.
Regards,
PrasathHi Prasanth,
Please check the status of PO if the GR is posted without any errors. If it has posted successfully, then run BBP_GET_STATUS_2 with only this shopping cart detail. If it has not replicated again. please check the error messages in RZ20 as it could also be related to posting periods or other errors.
I hope it helps.
Regards
Bash -
HR Org structure delta changes not replicating to SRM
Dear All,
We recently found out for some unknown reason new HR postions and users and HR org structure re-assignments are not replicating down into our SRM org strucure.
We have implemented SRM 4 on Server 5.5. The HR system is running on ECC4.
Does anybody have an idea what is causing this and how to fix this?
We need to get delta replication working in our production environmemt ASAP.
Thanks in advance.
SheenaHello Sheena,
I was not on the net last days. :o((
ECC 4.0, is that R/3 4.7 ex 2.00?
From your post I assume that you already transferred initial organization structures from HR. Is that correct?
Update will use the same filters and number ranges that you have for initial load. As for attributes, I am checking that also, but do not think that you will loose it.
Gordan -
SUS user data not replicated to SRM
In service SRMSUS in the SUS system, we have user w/ role SAP_EC_SUS_ADMIN_VENDOR.
When this user modifies his own user data such as name/email/time zone, the change in user data is NOT replicated to the SRM system. The SRM user data still contains the original user information.
I believe user data update is done via a RFC call, and not XI. I've checked for security auth object and there are no authorization issues.
Are there any additional configs we're missing?
We're on SRM 4.0 / SAPKIBKS10 / SAPKB64019
I've already checked all the OSS Notes including, but they don't help, or pertain to my situation:
Note 893714 - SUS30: Replication of bidding users from SUS to EBP
Note 919070 - SUS-UM: User settings are not stored correctlyHi,
you need to maintain the system details where the changed data needs to be replicated at the following customizing in SUS
1) Transaction SPRO --->
2) Path ---> Supplier Relationship Management ---> Supplier Self Services --->
Master Data --->Maintain Systems For Synchronization of User Data
( check help available with the customizing for more details ).
3) Maintain New Entry for the external systems ---> this should be your SRM system and then use the following data .
F. Mod.: Create User BAPI_USER_CREATE
F. Mod.: Change User BAPI_USER_CHANGE
F. Mod.: Delete User BAPI_USER_DELETE
4) save data
5) once you hav done this , when you make changes , data will be synchrozed with SRM -
R/3 Material description not replicating in SRM CC-Hubwoo
Hi experts,
I have an issue with the material description,
I dont have much knowlodge in EBP and im new to SRM.
Material description in R/3 and CC-Hubwoo are not matching.
Can any body help me regarding the issue.....
Thanks in advance,
Krish.Hi
In SRM, use Transaction SM30
Go to Table - COMCHIERARCHY_
Amend the setting so that the following is checked:
Transfer 60 Character Description
This will now ensure that the 60 character material group description is replicated to SRM.
The OSS note (455949) SAP has given us long back works around CRM customizing path.
*To access it in SRM use SM30 on COMCHIERARCHY to use long description instead of short one.*_
Use
In R/3 system - T023T has short description (20 char) and long description ( 60 char ).
The description in SRM COMM_CATEGORYT has 80 char length.
See related pointers ->
overwriting SAP standard material description
Material Group description in SRM
How can i change the description of material when i create a SC?
Hope this will help. Do let me know.
Regards
- Atul -
Header and Item Text is not replicating from ECC6.0 to SAP CRM 7.0
Hi SAP Experts,
When the text is added at header and item in Texts tab from SAP CRM then this is transferring into ECC6.0 but the otherway round is not working i.e., from ECC6.0 to SAP CRM.
Would appreciate for giving solution.
Thanks in advance.
Best Regards
SucchiHi Succhi
There are a number of oss notes to check: 1169856, 720147, 550343, and 549209
Please make sure that the text tables are included in the filter as per note 720147.
Also include the configuration as per note 549209.
It is necessary that the same text types exist in both systems so please review the configuration carefully.
I hop this helps.
Best Regards
Gavin -
R/3 material number not replicated in COMM_PRODUCT and COMMPR01 in SRM
Hi SRM experts,
We have a problem when SRM user tries to raise order against Product A. He encountered an error "Incomplete items on Catalog, only complete Items transferred". Upon looking at COMM_PRODUCT table and COMMPR01 (product maintenance) in SRM, this Product A is not existing. What could be the reason why this product was not replicated in SRM? Among materials w/c belong to same Product Category are all exist in table except for this specific material. This, however, is existing in MARA and not flagged for deletion. I have checked the SMQ2 in SRM and no queues found.
Need your expert advice.
Thanks,
MadelynHi
In SRM, use Transaction SM30
Go to Table - COMCHIERARCHY_
Amend the setting so that the following is checked:
Transfer 60 Character Description
This will now ensure that the 60 character material group description is replicated to SRM.
The OSS note (455949) SAP has given us long back works around CRM customizing path.
*To access it in SRM use SM30 on COMCHIERARCHY to use long description instead of short one.*_
Use
In R/3 system - T023T has short description (20 char) and long description ( 60 char ).
The description in SRM COMM_CATEGORYT has 80 char length.
See related pointers ->
overwriting SAP standard material description
Material Group description in SRM
How can i change the description of material when i create a SC?
Hope this will help. Do let me know.
Regards
- Atul -
SRM 7.0 PO not replicated to Backend ECC 6.0 Ehp 4
Hi SRM Gurus,
SRM 7.0 SP 8 - ECC 6.04 SAPKH60406 ECS
RFx Response to PO -
SRM Local PO is created and is in held status. Purchaser gives the source of supply and Acc Assignment and order it.
PO now is in Ordered status.
Issue: this PO is not replicated to Backend ECC 6.04.
Did the Debugging as follows:
1. BP at B46B_DPO_TRANSFER.
2. Got the PO GUID from the BBP_PD transaction.
3. FM BBP_PD_PO_TRANSFER_EXEC, execute it and it stopped in the breakpoint.
4. On 'FUNCTION 'BBP_PO_INBOUND' DESTINATION lv_destination', hit F6.
5. Checked lt_bapi_return details.
Here there should be information regarding some error during the PO copy to backend.
With this error message you can check why the PO was not created in backend.
ERRORS from Backend are as follows:
1. No instance of object type PurchaseOrder has been created. External reference: E BAPI 001
2. Document contains no items E ID 06 Number 010
3. Please enter items first. W ID 05 005
No XML messages in SXMB_moni both in SRM side and ECC side.
What am i doing wrong here? Any help is highly appreciated.
with regards,
FreemindRZ20 errors:
Local Errors: Business to Business Procurement(600)
Error reading export data for EXEC transfer of purchase order
Error in local purchase order; no update of references in EXEC system
Backend Errors:
PO 3000000051: No instance of object type PurchaseOrder has been created. External reference:
Purchase order 3000000051: Document contains no items
Purchase order 3000000051: Transfer Failed; Resubmit
Since we are in SRM 7.0 ECC 6.04 Ehp 4, with PI 7.11 + ROS and no SUS.
doent the system uses ESOA Service for PO replication.
We did CCTR / CPPR scenarios too. Both are sucessful.
Do we need to impl BADI PUR_SE_PO_INTERFACE_OUT_SELECT
But thats for Service hierarchy and Service POs - We dont have Service hierarchy or SUS in our SLD.
IF PO replication also uses PI, what configuration do i need to do? -
Vendor Sync Job not updating all vendors from ECC to SRM
The vendors are updated from ECC to SRM by batch job
Z_SUP_BAT_VENDORSYNC (object BBP_VENDOR_SYNC).
This job is missing updation of some vendors from ECC to SRM.
Its happening on and of.We are updating these leftout vendors manually by TCODE BBPUPDVD and new left out vendors by BBPGETVD.
We have concluded that information in these vendors is replicated from
ECC to SRM GUI but it is not reflecting in SRM portal.
Reasons looks like when vendor data(Incoterms/Payment terms) is replicated from ECC to SRM an
addition row is created in vendor data in SRM which does have this information(Tcode ;BBPMAININT).
Though the information is present in second row in vendor data tab of vendor information when executed using TCODE BBPMAININT but Vendor information in portal is picked from 1st row and does not appear when try to shop.
Can anyone suggest how to resolve this?Hi Harleen,
The problem is because of the inconsistency in the tables BBPM_BUT_FRG0060 and BBPM_BUT_FRG0061.
From table BUT000 take the partner guid for the problematic vendor.
Enter the partner guid as input to the table BBPM_BUT_FRG0060 . check the number of available rows.
Now check the table BBPM_BUT_FRG0061 with the partner guid. check the number of rows.
You must see the inconsistent number of records in these 2 tables for the partner, like 1 row in BBPM_BUT_FRG0060 and 2 rows in BBPM_BUT_FRG0061.
Delete the invalid row in the table BBPM_BUT_FRG0061. That should resolve the problem you are facing.
Regards,
Sapna -
Item text and note not transfering to PR which is in ECC from SRM 5.0
Hi,
We are in SRM 5.0/ECC 6.0
We have a requirement to transfer Item text and item note (Item Text/note to be printed on PR(T Code ME53n)) to ECC PR. From SRM 5.0
These Item note and Item text is available in PR->Iteam->Service->service text and line text.
Item text comes from Internal note and item note from vendor text .
I posted same question in SRM Form, but as these changes has to be done by ABAPer so I am posting it again here.
Please advice..
thanks,
shri
Moderator message: no cross-posting, please.
Edited by: Thomas Zloch on Nov 14, 2011 9:17 AMFor similar kind of problem in SRM 7.0 there is SAP note implementation : Note 1424590 - Text mapping from SRM SC to backend purchase requisition.
can any one give solution for SRM 5.0 -
Limit PO price changes are not replicated to ECC backend
Hi all,
SRM 5.0 ECS SP13.
When I change the value(increase/decrease) in limt PO which is already created(PO is changed for first time) and order the PO,under Overview screen.,the PO total value(at header level) shows the correct changed /new value while at the Item level,the Net price is shown as the old value!However when I go and check the item details,the field "VALUE" and "EXPECTED VALUE" have the changed/new value.
Because of the above issue,the PO changes are not replicated to ECC backend system.When I tested the BAPI BAPI_PO_CHANGE1 with the test data,there is no error mesasge in ECC backend system.
After this,when I change the PO for second time(again value increase/descrease),the total value and net price is shown correctly in SRM and changes are also replicated to ECC backend system!
I have also checked the cong for SPOOLPARAMETERS under Set Control Parameters and eveything is set correctly as shown below
SPOOL_JOB_USER User that execueds spool job. CUA_ADMIN
SPOOL_LEAD_INTERVAL intervall by which the retrytime incr. 60
SPOOL_MAX_RETRY Max. number of retrys for writing BAPIS 10
Can someone throw some pointers how to resolve the above issue.
Thanks in advance.Hi
can you recreate the same issue
are you saying that
1. create a limit po for 100 USD and replicated to ECC AS 100 USD total value.
2 . now update the PO in SRM 150 USD and it was not replicated to ECC ?
or
1. limit sc
2. Limit PO
3. update not reached ECC.
Note 1284361 - Limits not transferred to backend purchase order
Symptom
Extended classic scenario.
You have ordered a purchase order with more than one hierarchy item containing a limit.The purchase order is created or updated in the backend system without errors but the limits are missing in the backend purchase order. -
Confirmation was not replicated in ECC
Hi All,
I am new to SRM.
Requisitioner created confirmation for the PO. In ECC, If I went to transaction ME23N, entered the PO and confirmation does not show up under PO History as it should. Confirmation was not replicated in ECC.
Please suggest me the way to resolve this.Could youn please suggest me the related BADI name also.
Thanks & Regards
SaiHi Sai,
can you check your confirmation status in SRM ?
It should be "approved". Otherwise check your WF customizing.
Then an IDOC is sent to R/3. If not check your ALE customizing.
You should check in R/3 if the IDOC MBGMCR is created (transaction WE05 or BD87), and what is its processing status.
If the IDOC processing failed in R/3, then you won't have anything in R/3 PO history, normal, but also an error message is raised in SRM application monitors, saying that IDOC n° XXX could not be processed successfully.
Rgds
Christophe
PS: please reward points for helpfull answers -
SRM 7.0 Contract not replicating to backend system
Hi,
We have created CCTR global outline agreement in SRM 7.0 extended classic scenario. the contract is not replicating into backend. we have maintained necessary message types BLAORD, COND_A in ECC system as inbound parameters for partner type as SRM system.
when i looked rz20, i am seeing the message as "back end data could not be read"
When I executed function module B46B_CTR_TRANSFER I am getting an error, RFC destination could not be found.
please let me know what we are missing.
thanks
vem"Hi,
I guess your SRM70 connected to backend ECC with EHP4 pack applied. If so, Central contract will not use IDocs instead it works on new eSOA technology where Xi/PI need to be set up to process service calls.
If you are not using EHp 4 pack on your ECC, then SRM70 use IDocs to distribute contracts to backend.
Thanks,
Jagadish
Hi jagdish,
we are on SRM 7.0 and ENHPack 4.0 and as you said its picking up the eSOA route to distribute contracts in backend ECC system.
I would like to know how can we this programmatically ( BADI / Enhancement points) and force system to pick the ALE/IDOC route ???
Do you know any BADI / Enhancement points where we can implement this ??? -
Item text and note not transfering to PO from SRM 5.0
Hi,
We are in SRM 5.0/ECC 6.0
We have a requirement to transfer Item text and item note (Item Text/note to be printed on PO) to ECC PO. From SRM 5.0
These Item note and Item text is available in PO->Iteam->Service->service text and line text.
Please advice..
thanks,
shriFor similar kind of problem in SRM 7.0 there is SAP note implementation : Note 1424590 - Text mapping from SRM SC to backend purchase requisition.
can any one give solution for SRM 5.0
Maybe you are looking for
-
When Updating to IOS4 Do Not Say Yes to Udpate Changes to Settings
I updated my iPhone 3g to IOS4 on release date. OK You can stop laughing at me know, I got screwed over but I was lucky. I couldn't get the OS to install using the update so I did the work around and downloaded the OS into iTunes and did a backup and
-
I just moved from Germany back to the USA. How can I use an German iPhone 6 from T-Mobile in the USA?
-
We are setting up an iMac to a moshi mini-dp to Hdmi and then running Hdmi to a ViewHD 2 port HDMI splitter. The two outs are running to Acer H6500 projectors. For some reason the iMac won't recognize the output, however, my MacBook Pro does. I need
-
Photoshop CS5; Is my system up to it?
I had Bridge crashing in CS4 and now Photoshop in CS5 and am wondering if I need any (or major) upgrades to my Mac Pro? My system specs: Model Name: Mac Pro Model Identifier: MacPro1,1 Processor Name: Dual-Core Intel Xeon Processor S
-
Reassign stderr/stdout to a Log4J appender.
Does anyone know if there is a 'quick-and-dirty' way to reassign Java stderr and stdout to a Log4J Appender? Both Google and the log4j mailing lists are pretty sparse on this subject...