All kinds of problems on a Mac

It wasn't so long ago that AIR was working fine on my Mac
with Leopard 10.5.3. Now whenever I try and run an app, I get "This
application requires a version of Adobe AIR which is no longer
supported." I thought it was isolated to the app I was trying to
run, but it was for every AIR app I tried. So I thought maybe my
AIR runtime wasn't up to date. I go to the download page to get the
most recent version and try running it, but then I get "An error
occurred while installing Adobe AIR. Installation may not be
allowed by your administrator. Please contact your administrator."
But, I am the administrator. So I tried running the uninstaller,
and I get the same error about not being allowed by the admin.
Here's what I get in Console:
6/29/08 2:30:57 PM com.apple.launchd[110]
([0x0-0x3e03e].com.adobe.air.Installer[382]) Exited with exit code:
5
So, you can see the kinda mess I'm in. I can't even
uninstall. I tried repairing permissions, but no change. Any
ideas?

quote:
Originally posted by:
Oliver Goldman
Please try forcing an uninstall using the AIR 1.1 installer
that you downloaded. This can be done by running it via the
Terminal and passing the "-uninstall" flag, like so:
/Volumes/Adobe\ AIR/Adobe\ AIR\
Installer/Contents/MacOS/Adobe\ AIR\ Installer -uninstall
Sorry, I was out of the country for a while and didn't have
access to my computer to try this out. I just did now and got this
in Terminal:
quote:
Uninstalling Adobe AIR (all versions)
failed (consult log)
And here's the log:
quote:
Performing runtime install
UI SWF load is complete
UI initialized
starting user confirmation
runtime install entering error state: [ErrorEvent
type="error" bubbles=false cancelable=false eventPhase=2
text="Unhandled exception ArgumentError: Error #2007" errorID=2007]
begin quitting
error in stateQuitting: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="Unhandled
exception ArgumentError: Error #2007" errorID=2007]
rivate/var/folders/Gb/GbJqrMJ7EqG+8+bZzM2dcE+++TM/TemporaryItems/FlashTmp0/file1
Rollback due to error complete
error during install: [IOErrorEvent type="ioError"
bubbles=false cancelable=false eventPhase=2 text="Error #2038"
errorID=2038]
runtime install entering error state: [IOErrorEvent
type="ioError" bubbles=false cancelable=false eventPhase=2
text="Error #2038" errorID=2038]
begin quitting

Similar Messages

  • Ever since I got the "new & improved" Firefox, I have had all kinds of problems the latest of which has left me without toolbars. How can I get back to the previous version?

    # Question
    Ever since I got the "new & improved" Firefox, I have had all kinds of problems the latest of which has left me without toolbars. How can I get back to the previous version? edit
    IS THIS A GAME?
    WHAT DETAILS DO YOU NEED?
    THE COMPUTER HAS WORKED FINE
    WITH THE OLD MOZILLA FIREFOX
    FOR YEARS.
    NO CHANGES HERE IN ANYTHING ELSE.

    Click the Firefox button, go to Add-ons, then Plugins and disable the following:<br><br>
    * Fun Web Products Plugin<br><br>
    * My Web Search<br><br>
    Both of these are adware/spyware and cause performance issues in Firefox.
    Next, click the Extensions menu link (above Plugins where you are) and remove the "Ask Toolbar".
    If the problem persists, please do the following:<br><br>
    #Click '''Help '''| '''Restart with Add-ons disabled'''.<br><br>
    #In the next menu which appears, checkmark: "'''Reset toolbars and Controls'''".<br><br>
    #Finally, click the button called "'''Make changes and restart'''".
    Just in case you weren't aware of it, you can right click the Back or Forward buttons to get a list of sites visited. If you'd like to see the return of the arrow on the Back button, install this add-on: https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/
    Last but not least, some of your plugins are seriously out of date which exposes your system to exploits. Please visit the [http://www.mozilla.com/en-US/plugincheck/ Plugins Check] page and update where necessary.
    See: http://www.adobe.com/support/security/bulletins/apsb11-08.html

  • I'm having all kinds of problems since loading Lion and I really wish I hadn't bought it yet. Even after the software update today, 1. my modem still won't work, 2. Photoshop Elements produces muddy photo prints, etc.  Anybody at Apple listening?

    I'm having all kinds of problems since loading Lion and I really wish I hadn't bought it yet. Even after the software update today, 1. my modem still won't work, 2. Photoshop Elements produces muddy photo prints, 3. View preferences in windows don't hold,  etc.  Anybody at Apple listening?  Anybody else out there having these kinds of problems?

    10.7 was horrible unstable so I waited until 10.7.1 and tried it again. Well I have to say that it is still a defective OS. I am reverting to Snow as we speak from my carbon clone copy.. This is really the worst OSX I have ever used. It gives me random Kernel panics for no reasons, unstable airport and hundreds of small issues that are just not necessary. For instance I can't use QuickTime in Lion to trim a videoclip ( the UI goes mad and the trimslider becomes inoperable and hangs the Player window ) while in Snow it is no problem. Itunes gives me crackling sound when the equalizer is turned on, Graphical glitches in Photoshop, games crashing, Preview.app not working with some pdfs, so I need Adobes reader which I never used before.. It is definately not ripe for mass usage. Might 10.7.2 or 10.7.3 fix it, but not yet.
    * and just for the records : the hardware is absoltely ok. Because in Snow it works as it should. ( So many Lion fanbois are talking : "your Ram is defect", defintely NOT. - Lion is defect! ).
    Shame on you Apple.
    Message was edited by: Sjazbec

  • WHAT IS THE PROBLEM WITH PHOTOSHOP ELEMENTS 13   I have always had elements, and never had a problem  Bought a new Mac and purchased 13, having all kinds of problems downloading

    I have a new MAC  and purchased elements 13.  Can't get it to download

    Try an alternative link and validate with your 24 digit serial number - click here for PSE downloads

  • All kinds of problems after new 808 video camera.

    Lots of new minor (so far) problems have cropped up lately. iCal sometimes does not notify me of events. These are regularly scheduled events (like bill payments) that have been working for years. This has cost me a couple of late payment charges so far. If I open iCal to investigate, the notices are on the iCal page, and if I close iCal, they are not there when I open iCal again. Normally, they don't disappear unless I click on the little X. I tried to register about 5 times for a Photobucket account by filling out the fields on the registration page. One of 3 things happened when I clicked on "continue" at the bottom; it erased all of the fields that I filled in, Safari closed, or it told me that the format for the user i.d. was wrong. It didn't tell me what the format was so I clicked on "help", and then it told me that I should be using a computer to register. I guess it thought I was on a smart phone or something. I was on a another website and I tried to get some information that required me to input my zip code. When I typed the first digit, it appeared in the leftmost position of the zip code field. When I typed the second digit, it replaced the first digit (ie, it appeared in the leftmost digit position). When I typed the third digit, it replaced the first digit. I tried entering the entire zip code and clicking on "enter", in hope that was receiving my zip code even though it was not being displayed, but it did not work. Sometimes, when I am typing in a password or other field, the characters don't appear for a few seconds. I will be typing and watching the field and the characters will stop appearing. I will think that I didn't press the key down far enough, and I will type it again and nothing will appear, and type it again and then 3 of that character will appear.
    These problems seem to have started about the time I started using a tiny, cheap Chinese video camera. When I downloaded a video from the camera, it took about 4 times as long to download it as the length of the video (12 minutes to download a 3 minute video). I downloaded about 40 minutes of video, watched them on iMovie, then deleted them. Could the camera have been shipped with a virus in it? Is there anything else that could cause all these problems?

    "Could the camera have been shipped with a virus in it?"
    It's possible but it would not have affected your Mac because _*there are no OS X viruses.*_
    Have you tried another browser? Tried any basic troubleshooting?
    Boot up from your install DVD and run *"Repair Disk"* from the Utility menu.
    If you installed anything onto your computer from the camera, uninstall it.
    Any issues you have regarding Safari and/or iCal post in their respective forums where those users hang out at:
    Safari
    iCal
    !http://i50.tinypic.com/izvwo1.gif!

  • All Kinds of Problems with my MacBook Pro

    I've got a MBP Core 2 Duo, running 10.4.8. Here's the problems
    Okay, this all happened at once without me doing anything different than I do everyday. No changes, or maintenance programs run...just normal computing. Okay, so today I open iTunes and it says that the library is corrupt and forces me to reimport all of my music. Then, I open iPhoto and the same thing happened...library is gone. The files are still there, but I had to reimport them. Then, iWeb won't open at all...it just has one of those "Report to Apple" things that comes up. In Mail, all of my smart folders were still there, but my e-mails were all gone until it redownloaded them from the server. When I opened Skype I had to re-"Agree to terms" and retype in my username and password. Oh yeah, and all of my iCal calendars were gone.
    So I got everything back up and running, reset my computer and the same thing happened again.
    Does ANYBODY know what's going on? I'm about to move out of the country and don't want to deal with this stuff in an area with no Apple Support close by.

    Try this for starters. You may have a disk issue.
    Boot from your system CD, run Disk First Aid from your Disk Utility and repair your permissions.
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
    ITMS: MacOSG Podcast
     An Apple User Group 

  • My lock button no longer works on my ipod touch and now i have all kinds of problems with it freezing and kicking me out of apps. Is there any way to get this fixed and were would i go to get it fixed?

    Please Help!!!! I have an ipod touch 4th gen.  and since the last update the lock button no longer works, this has caused it to have a lot of problems now like freezing all the time, kicking me out of almost all my apps, some times even when if locks on its own its not locked and buttons with be pushed in my pocket, and this causes the battiery to die fast.   I really love my ipod and would like to just get it fix if possible for a reasonable about of money. Anyone know of a place I can get it fixed in Ft Lauderdale Fl area or is there something I can do?

    Have you tried:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    Apple will exchange your iPod for a refurbished one for this price:
    Apple - Support - iPod - Repair pricing
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • My 3-year-old Macbook is suddenly having all kinds of problems.

    Symptoms, all within a few weeks with no warning: First iTunes got corrupted. Then lots of 'corrupt file' error message with Word (seems to be xlsx files). Then Entourage started crashing repeatedly and hanging up. The fan started coming on a lot.
    What I've done: Visited the genius bar. Scanned the disks--no problems there. Installed and ran iAntivirus--no problems there. Did a clean install of OS X. Did a few one-off solutions that I found on other forms to address fan and Entourage database problem.
    Result: Even after the reinstall, I am still getting corrupt Word files. Fan still comes on more than it should.
    Hardware Overview:
    Model Name: MacBook
    Model Identifier: MacBook3,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.2 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 2 GB
    Bus Speed: 800 MHz
    Boot ROM Version: MB31.008E.B02
    SMC Version (system): 1.24f3
    Serial Number (system): W87*
    Hardware UUID: 6D473510-CEF1-5584-8B55-233D0BBD9EDA
    Sudden Motion Sensor:
    State: Enabled
    < Edited by Host >

    suetee wrote:
    It does have the original hard drive. But wouldn't something like that show up on the disk scan the Genius guy did?
    The Genius should have done a SMART scan. That is standard procedure, especially with a new hard drive.
    Here is a source of inexpensive, reliable hard drives: http://eshop.macsales.com/MyOWC/

  • Macbook 2.0 intel core duo ALL KINDS OF PROBLEMS HELP PLS

    This all started last week. In an effort to be more economical, I decided to keep my macbook and not get a new one. The battery was not doing well...so i bought a new one. I purchased Leopard and tried to install it...it installed but after it just stayed stuck on the gray apple screen. I tried troubleshooting. I reinstalled Tiger that came with it and it had the same problems. Anyways...a couple days ago I tried to reinstall Tiger again and it started working. I have been having problems with the rainbow wheel coming up all the time...so I figured maybe the ram is bad. I ordered new ram from crucial. I got it today and installed it and now the macbook will not even power up. I followed the troubleshoot guidelines and even installed the old ram again nothing.
    So, I'm stuck. Is the logic board again? I had it replaced like 7 months after getting the macbook and now it is out of warranty. Please help. Thanks

    Martin,
    Since you say it worked to some degree but then not at all after installing new RAM and then after reinstalling the old RAM it would not even work as well as it had prior to the RAM installs, then it sounds like one possibility could be that the logic board is failing do to cracked circuit traces (caused by thermal cycling) and the removing and reinstalling the RAM exacerbated the problem.
    The next thing I would try to do would be to cool down the computer to 50F or so and try it. Next try heating it up to 90F or so and try again. The temperature changes can affect a defective logic board. Not that this will solve your problem, but it can tend to validate the possibility of a defective board.

  • All kinds of problems... can't enter bios, etc

    Hey all, hoping you can help.  I only have one system at home which is now not working, so pardon me if I'm a little slight on details.
    I got a K8T Neo m/b with an athlon 64 3000 and 1gb of Kingston RAM.  It was all acquired as a bundle from Mwave.com, who I've done lots of business with before, and always had good luck.
    I threw it all in my old case and hooked everything up.  P/S is a 350W by the way, and seems to work fine.  I have a 60gb western digital HD and a cd writer- have tried various IDE options and nothing seems to make a difference.
    Here's the problem.  The thing boots, I get the logo screen.  I hit tab to clear the logo and try F11 for the boot setup or del for the BIOS.  Niether works.  It loads the Promise SATA driver and says No BIOS loaded or something of that sort.  Here it says hit TAB to enter setup, which leads me to what looks like a RAID setup which then freezes.  No big deal, I'm not trying to use RAID anyway.
    so if I let it run past that point, it goes back to the POST screen and says Checksum error, and something else (sorry can't remember, should have taken notes).  At this point it lists the POST options; delete to enter BIOS setup, F11 for boot menu, F12 I think to reset bios, somethin like that.  Anyway, none of it works.  At this point (below the checksum error note) it also lists two options- F1 to enter options (BIOS options I assume) or F2 to do something else (forgot again, sigh).  Anyway, the only key that does anything at this point is F2, which then tries to boot from network, where it hangs indefinately.
    Have tried clearing the BIOS with the jumper and by removing the battery.  Major problem seems to be that I just cant enter the bios.
    Thats all I can get it to do.  I'm really ready to toss it out a window, quite frankly, so any help would be appreciated!  
    Thanks!

    Hi
    It's not a wireless keyboard with the F key at top, which you have to press before the F keys work?
    Other than that just keep clicking the bottom right DEL key, mine does much the same to start with and does not enter bios setup till after the TAB key screen ( just let that pass) then the next post screen is the SATA disks on mine, then it enters the Bios setup.
    MSI KT8 NEO
    AMD 3200+
    Gainward FX5900
    120GB SATA
    120GB IDE
    DVD/RW/ CD/RW
    DVD RAM
    DDR400 1GB

  • I have my receipt of sale but can get the app on my ipad. The first update cause all kind of problems for me. May I have some help please?

    I have been trying for three months now and still can not get Goodreader back on my ipad. All the suggestions are not working. The last one I tried was to restore my ipad.

    That may be a problem related to network settings on your computer, or on the router that you use for connecting to the Internet.  Take a look at this article for a possible solution
    http://support.apple.com/kb/TS1368
    Since this actually a problem with using iTunes, and not directly related to an iPod (or an iPad), you may also want to ask your question in the appropriate iTunes forum category
    https://discussions.apple.com/community/itunes
    The specific problem is that you cannot connect to the iTunes Store when using the iTunes app, even through your computer has Internet access.

  • Just updated to Maverick on my IMac and have all kind of problems with Iphoto and Mailbox

    I recently updated my IMac to Maverick and  was not aware of all the problems that came with this update. In Iphoto a lot of pictures disappeared and other are turned upside down other were wrong format. In the mailbox I tried to sort by name of sender to find out that names of sender are not matching the mail. One name that I have had on e conversation with was related to 10 mails with NO connection to him.   Have made all the updates to latest version Iphoto promelem remains.

    Re iphoto, back up first then rebuild the library as follows.
    http://support.apple.com/kb/ht2638
    If you still have problems post in iphoto forum
    There is also a rebuild mailbox option in Mavericks Mail.

  • All kinds of problems

    I received an email this morning from a client - a client that sends me multiple messages per day without issue. Attached to the message was an Excel spreadsheet. I clicked the attachment to open it and got a warning that it was an application and the name ended in .hqx. I cancelled the operation and saved the attachment to my desktop where it appeared as an Excel file. At this point Mail unexpectedly quit.
    I double clicked the saved attachment on my desktop and it launched Excel... everything looked fine, I printed it, saved the changes and returned to my next project - working in FileMaker. From FileMaker I created PDF and saved it to my desktop. I dragged this PDF onto my Mail icon in the Dock. Mail launched but it did not open a new message with the file attached.
    I opened a new message manually, and tried to drag the PDF in to the message. The arrow changed to the arrow with the green + but still it did not attach. I next tried to attach the message using the File > Attach File... menu option. This also did not work.
    During all of this, other emails were coming in without issue. Until I tried to reply. I click the Reply button and nothing happens. Same goes for the Reply All and the Forward button.
    Reading the console, I get this error each time I click any of the aforementioned buttons, or try to drag in a file to be attached.
    Mail[238] * -[NSCFArray insertObject:atIndex:]: attempt to insert nil
    Additionally, pressing Apple+Q does not quit Mail anymore. The File menu gets highlighted, and then nothing. Usually the app will quit unexpectedly a few seconds/minutes after I initiate the keyboard request to quit.
    I reinstalled OSX, I removed the LaunchServices prefs from Macintosh HD, and from User/Library (at different times), and now I am really, really stumped.
    Help. Please.

    OK... it looks like I solved the problem, though I have no idea why this fixed it.
    I reviewed the Console Log and found another error message:
    pktResponseHndlr - received malformed response to query for 105.2.168.192.in-addr.arpa. (12)
    My location was set to use a static IP with DHCP. I changed this to DHCP and the error disappeared, and my Mail issues vanished.
    Thoughts?

  • Iphoto 11 *****.  I was upgraded without asking and lost all my library.  Then had to reload library and now it wants to play games with faces.  I have millions of thumbnail faces I don't want, didn't ask for and its creating all kinds of problems.

    iphoto 11 *****!  Slower, yawn....... freezes........yawn and forever wanting to sort out faces for me when I DONT WANT FACES and why  was imposed on me without my consent?

    And I still don't have a clue what the actual problem is.
    Before anyone can help, they need information to work with. Basic stuff:
    You launch iphoto - what happens? What do you see when the problem or issue actually occurs.
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.
    With this kind of information somebody can develop a starting point for troubleshooting the issue.

  • All Kinds of Problems with 5th Gen 60GB

    Okay so my problems started out by the ipod freezing after playing a few songs. It would show the screen for the next song but then never start playing and it would stay that way until the battery died. I couldn't reset it or turn it off or anything during that time. Then after the battery died and I recharged it, it would start up fine but then freeze again after maybe 10 songs. After a few cycles of doing this I charged it again and then all of my songs were gone from the ipod, and I plugged it into my computer and Windows and iTunes would not recognize it.

    I also have this problem, I have had my ipod for just over 1 year (12 days out of warrenty). I have never had any problems, until I updated to itunes7 and the newest ipod software 1.2?? Ever since my ipod will start up for about 30 seconds then freezes, if its playing a song, the screen will freeze then it will let the song finnish then stop. I have reset it, and restored it, deleted the updates in itunes, used different usb cables and ports, etc and the thing just keeps on freezing really unimpressed as it was fine before updating.
    PLEASE HELP US.......

Maybe you are looking for

  • Temp segments full

    Hi, There is a report based on a select which includes several tables, views and an inner select. In the last several years, any date will give no more than a couple of hundred records except for one day in 2006 when there are almost 3,000 records, a

  • How to use BOR object?

    Hello, We have never used a BOR object. We want use FIPP object. How can we do it? How can we call the Post method? Thanks a lot. Edited by: LM on Sep 8, 2008 11:07 AM

  • Problem with image files

    I've downloaded a file names j.JPG to an APEX 3.2 workspace but I'm not able to see it I've referred to as /i/p.JPG as the LOGO variable and its appearing correctly in the html source for the page. But I can't see it, not only in the application but

  • Please help with these effects!!!!!!!!!!!(Bad Language inside!!!!!!!)

    I am trying to figure out how the editor accomplished having that border on the outside with the different colors flashing on the inside. Is it a certain way to layer the vignettes and colors. Also it doesnt seem like he's using a vignette. Like its

  • IIS Crash because of a Application Popup w3wp.exe

    We have a report system that runs on a Win2003 Server with Crystal Reports for .NET Framewokr 4.0. We installed the Crystal Runtime 13.0. Now, every 5 hours the IIS server crash. At the time of the crash we have the following Event in the Event Viewe