All lines on PDF form are not printing

Greetings to all. I am running Adobe Acrobat XI version 11.0.0 on Windows 7 Home 64bit OS. I have made an attempt to print a PDF form. All of the lines in the form will not print. The properties of the document are: PDF Producer: MAC OS X 10.7.4 Quartz PDFContext and PDF Version: 1.3 (Acrobat 4.x). My printer is HP PSC 2350 series. There are about 30 lines on the form and out of the 30, 4 lines will not print. This form was not created by me. I saved the PDF from my university's website. Also and strangely, when I go to my printer settings and select Booklet, under Page Sizing & Handling, everything prints perfectly. I did try editing the lines by increasing the stroke width under Content and Editing but all of the lines still will not print. Here is a screenshot of the form from the website. My question is what settings on my printer or adobe acrobat do I need to change? Or what could be the cause of this issue? Any help would be greatly appreciated. Please do not hesitate to respond if more information is needed.

Most likely, the fault lies with the application used to fill in the forms,
which is probably Apple Preview, that is known to cause this problem. You
can fix the forms with this utility:
http://blog.practicalpdf.com/2013/08/introducing-the-practicalpdf-fix-form-utility/
And in the future instruct your users not to use Preview, but only Adobe
Reader (or Adobe Acrobat).

Similar Messages

Retro entires in HR Forms are not printed when using device type ZHPP3005

Hi All,
We are doing a HCM implementation. We are using HP P3005n printer and ZHPP3005 device type to print our HR forms. We are using ZCalibri font.These are smartforms. Everything was printing perfectly.
Then there were retro calculations made to these forms.Strangely, the forms doesn't display these retro entries in the print preview using ZHPP3005 device type. Only the retro entries throughout the form are not printing. All other entries get printed.
When we use device type HPLJIIID, we get these retro entries printed in our form however the format of the form gets changed.
Now, we want to use device type ZHPP3005 and get these retro entries printed. How would we achieve this? Is this a device type issue? Or, anything needs to be done in the smartform? Why is this issue?
Please help. Quick response will be appreciated. We are nearing our Go Live date and needs this resolved immediately.
Thanks in Advance.

Hi,
Check the assigned page format to your custom device type. Try to assign all the page format which are available for
HP*** which you gives you desired result.
Regards,
Vamshi.

International Characters in PDF Forms are not shown correctly (Adobe Reader 11.0.06)

I have a PDF form served from a web application and shown in Internet Explorer and want to put in string values with norwegian letter like 'ÅRE ØRE ÆRE'.
These are not shwon correctly when I toggle "Highlight Existing Fields" and the focus is not on the text field in question.
I am runing on Windows 7.

I cannot reproduce this using a test form I created: https://files.acrobat.com/a/preview/e6b390e1-625c-4f59-86c5-c2ca07998279
Does the same thing happen with the form above? If not, can you share your form with us: http://forums.adobe.com/thread/1408375

Responses in PDF form are not visible

I have Adobe Acrobat Pro XI installed and have produced a form which can be filled in by third parties.
I have received a return in which the all of the responses are not visible unless I click in the field

Most likely, the fault lies with the application used to fill in the forms,
which is probably Apple Preview, that is known to cause this problem. You
can fix the forms with this utility:
http://blog.practicalpdf.com/2013/08/introducing-the-practicalpdf-fix-form-utility/
And in the future instruct your users not to use Preview, but only Adobe
Reader (or Adobe Acrobat).

All my PDF forms are automatically transformed in Word forms,how can I change that and only choose the PDF I want to transform

All my PDF forms are automatically transformed in word forms,how can I change that and only decide which PDF to be transformed in word

Hi Ulfsch,
Thank you for posting on the Adobe Forums, kindly try the step mentioned below.
1) Right click on any of the PDF file and choose the option open with
2) Select choose default program
3) Select Adobe Reader/Acrobat from the list
5) Check the box "always open this type of file with selected program" (not the exact same wording)
6) Click OK
If you are on Mac, CTRL+Click on the file.
Go to Get info
Go to Open with
Change it to Adobe Reader/Acrobat and click change all.
Thanks,
Vikrantt Singh

Some comments on PDFs are not printed

Hello,
I've noticed that when making comments in Acrobat XI Pro, some of the comments are not printed as they are shown on the screen. For example, on one document I have a text box with two lines of text in it, but only the border of the text box and the second line of text prints. The first line is blank. I tried different printers and different documents, but it still happens. It's not always a text box, but usually text is omitted. I made sure "Documents and Comments" are selected to print.
The only way to get these to print is to turn on "Print as image". I DO NOT want this to be a fix though. I'd like to be able to use the printer color options as it worked in the past with Acrobat 9.
Can someone please help me? Thanks for your time.

Hi
You have a couple of options as I see it please try these steps given below might help you to fix your issue.
1) Go to Device Manager and uninstall the click on + symbol next to Keyboard then uninstall the standard keyboard then restart your unit and check.
2) Go to HP website and update the Bios on the unit.
3) Click start type Command Prompt check if all the numbers & alphabets works fine in this screen if not you might have to replace the keyboard.
If your notebook is still under warranty, contact HP and arrange to have the part replaced.
If you are out of warranty and would like a guide on replacing the part yourself, please let me know.
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Cyan and yellow are not printing on HP officejet pro 8500 all-in-one printer A909

I have an Officejet Pro All-in-One 8500 A909a printer, using OS X operating system. Cyan and yellow are not printing. I've ran the Print Quality Diagnostics Page and they do not show up there or on the align page. My ink levels are good.
Can you help me find and fix the problem?
Thanks

Hi DavidM2,
Welcome to the HP Forums.
I see that you are having issues with the Cyan and the Yellow ink cartridges as well.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
If you are still having issues then try to replace the cartridges.
Let me know how you make out and if you have any other questions, feel free to ask.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Upgraded to CS5 Illustrator form CS3 Illustrator. Colors are not printing correctly in CS5

I have just recently purchased CS5 Premium Suite. I am working with Illustrator. When I print my CS3 Illustrator files in CS5 the colors are not printing correctly. Is there a way to fix this problem

I've been doing more troubleshooting since I wrote this post. I've now tried printing from a non-Adobe app and I'm getting the same margin error. So it is definitely a Xerox issue and I have a tech coming out on Monday.
The reason I originally figured it must be an CS5 issue is because just two weeks ago when I was using CS2, our landscape-oriented programs were printing with .25" margins as they should. Then last week after upgrading to CS5, the inside page (2nd page) was noticeably out of whack and shifted to the right (not left). But when I started trying to troubleshoot this week, everything started shifting to the left.
The only thing different between those two weeks was the fact I updated to CS5.
But obviously, my printer as decided to go to crap in more ways than one all in a two week period. Hopefully the tech can sort it out next Monday.
Thanks!
Christi

PDF's attached to my emails to HP ePrintCenter are not printing to my HP6500A Plus

PDF's attached to my emails to HP ePrintCenter are not printing to my HP6500A Plus. The tagline in my email prints, but not the attached PDF. These are unsecured PDF's created by printing to PDFCreator, saving the PDF, then attaching and emailing to HP ePrintCenter.

Hi, what file size is the PDF? (I think the limit could be around 5MB)
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Help! PDFs are not printing because adobe reporting that postscript conversion needed?

Help! PDFs are not printing because adobe reporting that postscript conversion needed? Can someone help me? Please?

Please give us the complete error message, every word. This is not a familiar symptom.
Also: What software and version are you printing from? What system do you have?

Printing. My prints are not printing at the proper size. If I designate 5x7 it prints at something around 4x3. I have set all the parameters.

My prints are not printing at the proper size. If I designate 5x7 it prints at something around 4x3. I have set all the parameters.

When you saye a you have set all the parameters, does that include the cell size in the print module? Are you printing on 5 x 7 paper? And, if you are, have you set that paper size in the page setup?

All share functions except email are NOT enabled. I can create and print but order prints is also not working. HELP!

All share functions except email are NOT enabled. I can create and print but order prints is also not working. HELP!

Hello
Please see notes and 4 attachments for your reference. Hopefully this information helps.
Maureen
what version of iPhoto are you using? 9.5.1
what system version are you running? OSX 10.9.4
what happens when you try to order? See attached picture. I want to share pics to FB & FLICKR etc
did you make sure you've selected the correct Print Products store in iPhoto's Advanced preference pane? YES
what fixes have you tried? Restarted computer. I'm not very computer savy. I have had no problems with this in the past.
where is your library located? I have not moved anything for iphoto.
did you apply any updates or upgrades just prior to the problem occurring? I can't remember
are you running a "managed" or "referenced" library? Not sure how to find this out
what type of Mac? iMac 2.5 GHz Intel Core i5
how much free space on your boot drive? 12 GB 1333 MHz DDR3 - I have an external hard drive 1 TB

Some paragraph tags are not printing when document is printed from Framemaker 10.

So this is really odd. I have a situation where I have a document that I am developing in Framemaker 10 several different paragraph tags are intermittently not printing when the document is physically printed. When I go to print the document from Framemaker 10 to a physical piece of paper some tags are printing partially or not at all. What makes this stranger to me is that when I print the document to a PDF, all of the content and tags show up in the PDF. Then when I try to physically print from the PDF, the tags do no print from that document as well.
Typically the tags that are not printing are those that have been bolded, but are across several different tags. Also the problem is sometimes only to the first line of a tag, where if the tag carries over to a second line in the document, the text on the second line prints. Another quirky instance that shows up is where the text a line will print only parts of the text. The document uses the same type font for the entire document, Helvetica 55 Roman. The font size varies and the coloring varies as well, but this issue is happening for all sizes and colors.
I'm not sure what additional information is important here, but if you need additional information please request it and I will supply it to the best of my ability. I'm a content developer with an intermediate amount of experience with Framemaker.

I'm not sure if this is the same problem, and you didn't mention your
OS, but there was a widespread problem with dropped text in PDF with
Windows XP. A hotfix was issued to fix it. If on Windows XP, you should
install it:
http://blogs.adobe.com/techcomm/2008/07/hotfix_for_framemaker_1.html
Also, you mentioned that it was "bolded" text that tended to have the
problem. Bolded text is artificially bold and does not use actual bold
fonts. (If I recall, text is double printed at a slight offset to give
the appearance of a bold font.) So there is no bold font to embed. Be
sure you install and use an actual bold font, rather than using the
bolded characteristic, or you could see problems.
This is a stretch, but you also mentioned that some of the problem
sections have colored text. Check the printer properties of your Adobe
PDF virtual printer to make sure someone didn't reassign the driver (on
the Advanced tab). It should be set to use the Adobe PDF Converter
driver (or Acrobat Distiller in older Acrobat versions). Years ago,
people sometimes changed this setting to use other drivers for various
reasons, not realizing that they limited themselves to the capabilities
of that driver. So, if they chose an HP LaserJet PostScript driver, for
example, their documents might no longer be able to be 11"x17" or
color-- because the printer couldn't handle it. The driver was limited
to 8.5"x14" and black-and-white. Perhaps there is a driver set that is
choking on the colored text-- though I would think it would merely
convert it to B&W.
Okay, I've grasped at enough straws.

How do I print all responses as pdf without selecting and printing just one response at a time?

How do I print all responses as pdf forms without selecting and printing just one response at a time?

Sorry this is not supported at this time. You can only download the responses as PDF one at a time.
You can export the response table and print the whole table but if you want to print each response individually you have to do it manually. Sorry.
Gen

PL/SQL log messages are not printing from Java concurrent program

Hi,
I have a strange issue while submitting the Java concurrent program through PL/SQL.
I have a PL/SQL concurrent program which will invoke the Java concurrent program inside the package by use of "FND_GLOBAL.SUBMIT_REQUEST". It worked and submitted successfully. From that Java concurrent program we are calling some other PL/SQL packages and printing some log messages over there. But problem here is the request is only printing the Java log messages in view log but not the PL/SQL log messages. But if I submit the Java concurrent program directly from SRS form at that it is printing both Java and PL/SQL log messages.
I am just wondering how the log messages has not printed. Please provide your inputs to solve this problem.
Thanks
Suriya

I'm adding log messages in the package body , but these messages are not printing after completion of concurrent prog.
Any suggestions.
FND_FILE.PUT_LINE(FND_FILE.LOG,'Data Test :');Do you have COMMIT in your code?
https://forums.oracle.com/forums/search.jspa?threadID=&q=%27FND_FILE.PUT_LINE%27+AND+commit&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

All lines on PDF form are not printing

Similar Messages

Maybe you are looking for