All Lumia 928 folders are 'read-only'

So all of a sudden, all the folders on my Lumia 928 are marked as read-only regardless of the PC it is plugged into, and I can no longer drag and drop files between the phone and PC because of it - it tells me I don't have permission or something like that. Not only that, the read-only checkbox is greyed out as you can see in the attachment, so I can't uncheck it to fix the problem. No dedicated software (Zune, Windows Phone Software) works either, and I have exhausted all possibilitiues I can think of.
It's clearly something with the phone since it happens on all PCs, and I suspect a setting, but I can't figure out which. If anyone has any thoughts, I'd welcome them.
Attachments:
ReadOnly.jpg ‏58 KB

Did you try after rebooting the Phone ? Its all 'Read-only' with my Nokia Lumia 920 and Nokia Lumia 1020 too but Drag-Drop or Copy-Paste is possible ...

Similar Messages

New Folders are Read Only

Logging in as admin with full priveledges and when I create a new folder on the deskop, it's Read Only. Get info displays Read/Write access but new folders are created as Read Only. I can't figure out why. Any ideas?

Thanks for the reply. Have tried repairing permissions with the same result. Do you have the command for creating a folder from the Terminal. I'll try that. I don't know what the umask is but I'll report back. Thanks again for the help. This is very strange.

MS-8340B - Wont burn, all CD-R/W are Read-only

Hi all,
i had this drive for a 6 month now, it used to work great.
But since a March, the drive refuse to burn.
I can read any CD w/out any problem. But when i insert a Blank CD-R/W, windows/the Burner see it as a read-only CD.
I tryed Several Burning software, Diff. brand of media, re-installed Windows and done the Firmware upgrade.
Any help would be greatly appreciated.
Thank you
H3dges
System:
AMD 1.5Ghz
MSI K7T266 Pro2-RU
512mb DDR pc2700
Readeon AIW 8500DV
Enermax 540 Watt

Sounds like the hardware died...take it back for a replacement...
Cheers!! 8)

Mail attachments won't save - saying folders are Read Only

Every time I try save an attachement, mail pops up saying this location is read-only,
Any help?

I still can't fix this issue.
This is what happens when I try to create a new folder in the target folder that I want to save my attachments too. The target folder has Read & Write access for everyone.
I've tried:
Accessing Repair Utilities and typed in resetpassword
Resetting the permissions on my computer
Relaunch Finder
But so far nothing works and I still get the Read Only error message when trying to create a new folder to save my attachments.
UPDATE:
I've used these steps by Linc Davis, who is like a savior for everything Mac!
The thread to this problem can be found here - https://discussions.apple.com/thread/4925516?start=0&tstart=0
Now my email is back to normal!
Message was edited by: jajashahmohen

Bug 2.1: Report folders are read only

Hello,
- unzip sqldeveloper-2.1.0.63.73.zip and start without migrating settings.
- add a new folder to user defined reports
- restart SQL Developer
-> The context menu of the new folder has only two options: Copy and Export
Maybe the problem is with the local language settings (XP German), because when I add
AddVMOption -Duser.language=en
AddVMOption -Duser.country=USto sqldeveloper.conf I don't have the problem.
Besides the minor issue that I have to change the language settings to german defaults in the preferences, there's no use in localization if it breaks the program ;-)
Regards
Marcus
P.S: It's the same bug as in 1.5.5: 1.5.5 Cannot add user defined report to folder
P.P.S: Another finding: I get the start tab with the online links and the tip of the day only when I set language=en.
Edited by: Marwim on 21.12.2009 08:31
Edited by: Marwim on 21.12.2009 08:37

Hi Marwim,
Thanks for this feedback.
I have replicated the issue and logged a bug.
Bug 9231534 - FORUM:USER DEFINED REPORT FOLDER MISSING ACTIONS IN NON ENGLISH LOCALES
Regards,
Dermot
SQL Developer Team

Javax.jms.MessageNotWriteableException: Message properties are read-only.

Hi all,
Me again, i need to know, how can i, to make available to change a message, from a queue. The subject (up) it's show the problem. I'm setting a message in that way: "message.setStringProperty("estado","ReEnviado");". The reason, of this change is to make possible, the consume of the message and "delete it" from the queue.
Please if some, could help me,
Thanks in Advance.
Jorge.

gargula wrote:
I have copied tens of directories with JPG pictures from a CD (that I burnt using Windows XP while on a trip overseas) to my iMac's HD. The problem is that all the copied files are read-only now and I cannot edit them... I tried using Finder to make them "writable" but the yellow padlock at the bottom of the Info window of the affected files is disabled (it's pale yellow, I cannot click on it).
My questions are:
a) why are the files read-only in the first place?
did you copy those files while logged in as the current user? if yes, look at the permissions of the files on the CD. in general, when you copy something via drag and drop in finder the owner and the group of the file changes but posix permissions don't change. so if they were read for the owner and the group on the CD they will still be so when you copy them to the disk. this should not normally be the issue with windows burned disks though.
Was it the way that I copied them (drag and drop in Finder)?
no. that was the right way to copy.
b) is there a way to modify the properties of a directory and its content in one single command to remove the read-only attribute?
yes, but later on that.
c) why is the padlock disabled in Finder? I expected to be prompted for my Admin password when clicking the padlock.
that's strange. check the ambient folder. it could be locked for example. re the files sitting in some folder you made or are they on the desktop?
Any help is appreciated.
Message was edited by: gargula

Photographs all are read only??

Hi folks. I wasn't sure where to put this question so it may not be in the right place. I have the iMac and my wife has a Dell PC (poor thing :0)). I copied all of the photo's she has collected onto a DVD to transfer them to my iMac for editing and future publishing to the web. I use Photo Shop Elements 6 to do this with, but it would not let me edit due to insufficient permissions! I must admit I chuckled when that came up since I took most of these photo's. So I opened Finder, browsed to the directory where the photo's are and using "Get Info" I found that all of these photo's and directories and subdirectories (literally hundreds of photo's) are read only permission. All I'm looking for is a way to make them all read/write en masse. Is there a way?
Thanks,
Rich

Hi Richard
I don't have a-lot of experience with the windows OS's, but do share hundreds of JPEG images every year with PC user's and that sounds like a problem with the photo files or the way they were burned onto the DVD. If you have a MS-DOS FAT 32 formatted External HD, a Flash Drive or Card Reader & Camera Card you should have no problems transferring the Original JPEG Photo Files back and forth between a Windows box and Mac.
See → http://support.apple.com/kb/HT2518
For network sharing, See ↓
http://www.ifelix.net/tech/3020.html
http://forums.mactalk.com.au/20/42765-how-share-files-between-mac-os-x-leopard-v ista.html
Dennis

When I select a page to bookmark all my bookmark folders are not shown so that I can enter the page in that bookmark folder.

I have a list of bookmark folders. When I want to bookmark a page I select "bookmark this page" but not all of my folders are shown. If the folder is not shown I can not get it to be filed in that bookmark folder. How can I get all of my bookmark folders to be shown. When I go to show "all bookmarks" and select "bookmarks menu" all are shown. I am using firefox 8.0.
I have updated to firefox 8.0.1, did not change the problem. When I show all bookmarks I have 11 folders but when I try to bookmark a page only 5 folders are shown not all 11, why?

The problem is that not all of my bookmark folders are shown when I want to bookmark a page. They are shown when I "show all bookmarks" Ctrl+Shift+B but not when I want to bookmark a page. The article how to use bookmarks does not solve my problem. The folders are not shown so I can not use them. Why?

The button labels in my folders are reading as numbers

The button labels in my folders are reading as numbers

First, please stop posting your email address. That will only get you on spam lists.
I suggest you erase your boot volume and restore from the backup. Check that the issue is resolved, then (and only then) change every password you have and check all your online financial accounts for unauthorized activity. Consider canceling all credit cards and requesting new ones.
When that's done, you need to learn the basics of safe computing.
Mac OS X versions 10.6.7 and later have built-in detection of known Mac malware in downloaded files. The recognition database is automatically updated once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders. In most cases, there’s no benefit from any other automated protection against malware.
The most effective defense against malware is your own intelligence. All known Mac malware takes the form of trojans that can only operate if the victim is duped into running them. If you're smarter than the malware attacker thinks you are, you won't be duped. That means, primarily, that you never install software from an untrustworthy source. How do you know a source is untrustworthy?
Any website that prompts you to install software, such as a “codec” or “plug-in,” that comes from that same site, or an unknown site, is untrustworthy.
A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim.
“Cracked” versions of commercial software downloaded from a bittorrent are likely to be infected.
Software with a corporate brand, such as Adobe Flash, must be downloaded directly from the developer’s website. No intermediary is acceptable.
Follow these guidelines, and you’ll be as safe from malware as you can reasonably be.
Never install any commercial "anti-virus" products for the Mac, as they all do more harm than good. If you need to be able to detect Windows malware in your files, use ClamXav -- nothing else.

Fields for creation of BP in cProjects front-end are read-only

Hi everyone,
I'm a beginner in SAP-Development/Customizing so I hope this question isn't too easy
I can't create a Business Partner using the cProjects front-end (Ressources > Staffing) because the necessary fields and buttons are read-only... (> web-Dynpro Component: DPR_ROL_STAFF; View-Info: VI_SEARCH_CREATE)
I'm using CPRXRPM 450_700 patch 0006
The field-control is standard-SAP (0SAP).
My user-account has all cProject-roles + SAP-ALL
I assume i can change the behaviour of these fields in the Field Control but I can't identify which is the corresponding Object Category to apply the changes.
- Is there a documentation which field belongs to which Object Category in Field Control?
- Or can somebody tell me a procedure to find it out on my own?
Thanks in advance

Hi,
generally it is recommended to use transaction BP or ALE distribution to get the business partner be created.
If you would like to create the BP in web UI directly, the user must have the Structural Authorization, see customizing path:
Collaboration Projects -> Resource Management -> Organizational Management.
It is very HR related topic, you may contact a HR consultant to know more details about it.
Kind regard,
Zhenbo

TS4083 i just updated to the icloud n new ios update and all my email folders are gone how can i fix this

i just updated to the icloud n new ios update and all my email folders are gone how can i fix this

IOS is the operating system for an iPhone, or an iPad, I assume you mean OSX as this is a Mac forum.
What version did you update from, and to.

All of a sudden my screen has black bars on both the left and right sides; all of my folders are overlapping as well. Anyone know how to fix this?

All of a sudden my screen has black bars on both the left and right sides; all of my folders are overlapping as well. Anyone know how to fix this?

Did you try restart the Mac?

[10.0.7 ESR] Temporary documents are read-only again, even with the "browser.helperAppsbrowser.helperApps.deleteTempFileOnExit" parameter set on "false". Why?

We currently updated from the old 3.6 Firefox to the ESR version 10.0.7. Eversince we've used Firefox we've had a problem with documents being read-only when downloaded temporarily. But we've found the solution by finding the entry
browser.helperAppsbrowser.helperApps.deleteTempFileOnExit
in the about:config and setting it on false. Documents were writeable again, and the world was full of fluffy unicorns and rainbows.
But that doesn't seem to be sufficient when using Firefox 10.0.7 ESR, since that entry is set but all our documents are read-only again. We checked that it is a Firefox issue by deactivating all add-ons to be sure, that it's the browser itself that makes that setting.
What is the cause and how can we change it back to them being writeable again?
Andrea

While that may be best practice, it doesn't help in this case.
We use a system that creates documents by using templates and filling datafields with individual values based on the case that is being worked on. These documents are saved in the system and are only displayed for information purpose.
Still some of these documents have to be altered. The system offers this possibility by letting you edit the temp file and load it back up, so that the altered document is saved in the system. The document gets a unique file name in the temp folder which includes numbers so that the system can identify which document in the system should be overwritten by the altered version.
Since the documents aren't meant to be on the local harddrive anyway but in the system, "save as..." is no real solution in this case.

Callback function may be NULL only when database handles are read-only

Hi,
I am getting some errors when trying to run my java code that will try to open a few cursors and join them to fetch the data.
ath .:/usr/src/db-4.7.25.NC/java/src:/usr/local/BerkeleyDB.4.7/lib/db.jar bdbtest
MyDbs: Callback function may be NULL only when database handles are read-only
Error on inventory secondary cursor:
java.lang.IllegalArgumentException: Invalid argument: Callback function may be NULL only when database handles are read-only
What does that error mean? How can I resolve it? I am following the sample program and I can't find anything related.
Here is my code.
import com.sleepycat.db.DatabaseException;
import com.sleepycat.db.Database;
import com.sleepycat.db.SecondaryDatabase;
import com.sleepycat.db.DatabaseConfig;
import com.sleepycat.db.DatabaseType;
import java.io.FileNotFoundException;
import com.sleepycat.db.DatabaseEntry;
import com.sleepycat.db.SecondaryCursor;
import com.sleepycat.db.Cursor;
import com.sleepycat.db.DatabaseException;
import com.sleepycat.db.LockMode;
import com.sleepycat.db.OperationStatus;
import com.sleepycat.db.SecondaryCursor;
import com.sleepycat.db.SecondaryConfig;
import com.sleepycat.bind.EntryBinding;
import com.sleepycat.bind.serial.SerialBinding;
import com.sleepycat.bind.tuple.TupleBinding;
import com.sleepycat.db.Cursor;
import com.sleepycat.db.DatabaseEntry;
import com.sleepycat.db.DatabaseException;
import com.sleepycat.db.LockMode;
import com.sleepycat.db.OperationStatus;
import com.sleepycat.db.SecondaryCursor;
public class bdbtest {
public static void main(String args[]) {
SecondaryDatabase myDatabase = null;
     Database primDB = null;
     Cursor cursor = null;
try {
// Open the database. Create it if it does not already exist.
DatabaseConfig dbConfig = new DatabaseConfig();
     dbConfig.setErrorStream(System.err);
dbConfig.setErrorPrefix("MyDbs");
     dbConfig.setType(DatabaseType.BTREE);
dbConfig.setAllowCreate(true);
     SecondaryConfig mySecConfig = new SecondaryConfig();
     mySecConfig.setErrorStream(System.err);
mySecConfig.setErrorPrefix("MyDbs");
     mySecConfig.setType(DatabaseType.BTREE);
mySecConfig.setAllowCreate(true);
     primDB = new Database("/tmp/bdb_ca_db.db",
"bdb_ca_db",
dbConfig);
dbConfig.setAllowCreate(true);
myDatabase = new SecondaryDatabase("/tmp/bdb_ca_sdb.db",
"ca_sdb_res_alias",
primDB,
mySecConfig);
     String res ="in-1";
     SecondaryCursor secCursor = null;
     DatabaseEntry searchKey =
new DatabaseEntry(res.getBytes("UTF-8"));
     DatabaseEntry foundKey = new DatabaseEntry();
DatabaseEntry foundData = new DatabaseEntry();
     secCursor =
myDatabase.openSecondaryCursor(null, config);
// Search for the secondary database entry.
OperationStatus retVal =
secCursor.getSearchKey(searchKey, foundKey,
foundData, LockMode.DEFAULT);
     if (retVal == OperationStatus.SUCCESS){
          System.out.println("succ");
     }else {
          System.out.println("fail");
while (retVal == OperationStatus.SUCCESS) {
String keyString = new String(foundKey.getData(), "UTF-8");
String dataString = new String(foundData.getData(), "UTF-8");
System.out.println("Key | Data : " + keyString + " | " +
dataString + "");
secCursor.getNextDup(searchKey, foundKey,foundData, LockMode.DEFAULT);
     } catch (Exception e) {
System.err.println("Error on inventory secondary cursor:");
System.err.println(e.toString());
e.printStackTrace();
     finally {
// Make sure to close the cursor
          try {
          cursor.close();
          }catch (com.sleepycat.db.DatabaseException e) {
System.out.println("All done.");
}

Hi,
The error is because either the primary database or the secondary database is configured as read only and the callback to create the secondary keys is null. A quick glance of the code, it appears as if you did not set up the secondary database correctly. In the Getting Started Guide for JAVA API chap 10, we have detailed information on what needs to be done as well as a code example. Please refer to http://www.oracle.com/technology/documentation/berkeley-db/db/gsg/JAVA/index.html and look for Chap 10.
regards,
Mike Brey, Oracle Berkeley DB

"The selected cells are read-only" error on Custom Field when trying to insert in Datasheet mode

I have a custom field that works completely fine. Yesterday our QA team found out that when trying to insert in Datasheet format, the error "The selected cells are read-only" was thrown. Any ideas? I tried passing the following property to my fldtypes_field.xml file:
    <Field Name="ReadOnly">FALSE</Field>
No luck.Victor Palma

Unfortunately it did not work. I also developed the code and access the field and checked its property called "ReadOnlyField" which is already set to false.
Below is the xml that i am using. Can you please share the xml that you had used?
<?xml version="1.0" encoding="utf-8"?>
<FieldTypes>
  <FieldType>
   <Field Name="TypeName">MyCustomField</Field>
   <Field Name="ParentType">Text</Field>
   <Field Name="TypeDisplayName"> My Custom Field</Field>
   <Field Name="TypeShortDescription"> My Custom Field</Field>
   <Field Name="AllowBaseTypeRendering">True</Field>
   <Field Name="ReadOnlyField">False</Field>
   <Field Name="UserCreatable">TRUE</Field>
   <Field Name="ShowInListCreate">TRUE</Field>
   <Field Name="ShowInSurveyCreate">TRUE</Field>
   <Field Name="ShowInDocumentLibraryCreate">TRUE</Field>
   <Field Name="ShowInColumnTemplateCreate">TRUE</Field>
   <Field Name="FieldTypeClass">My Assembly Information goes here</Field>
  </FieldType>
</FieldTypes>

All Lumia 928 folders are 'read-only'

Similar Messages

Maybe you are looking for