All Macs now slower after 10.5.5 update

This includes MacBooks and MacBook Pros of the 2.2 GHz cohort, the MacBook Airs, and certainly others as well.
Dear Apple, what have you done? Any advice? Any Apple personnel reading this?

Apple Coder wrote:
All computers are not created equal.
No, but identical computers, new, are VERY close, or defective.
I bought to powerbooks at the same time and one had to be completely replaced by apple.
That's defective.
We have friends that have iMac G5's that are able to update to 10.5.5 from the apple software, but we could not and after downloading the update, we are unable to log in.
That can happen, but I'd blame it on some corruption or misconfiguration of your computer, or possibly a hard drive that's on its way out.
Chips, wires, CPU, and so forth are not all the same. so every Mac will not perform the same as the other. Some are better some are worse. I have witnessed it personally.
The performance variation between identical computers working correctly is very, very small.
But when you take an iMac that screamed with 10.4 and put on 10.5 and it slows, and slows, and has problems after trying to update to 10.5.5 and getting an install failure, I sense it is a 10.5 issue with the architecture.
Maybe, or maybe an iMac that's been corrupted, misconfigured, or has a dying hard drive.
I have a G3 Yosemite running 10.4.11 and it is faster than when it ran 10.3. Go figure.
Doesn't seem mysterious to me, sometimes a new major version will include significant new optimization.

Similar Messages

  • Why is my mac so slow after i downloaded os x yosemite? the rainbow circle shows up many times

    why is my mac so slow after i downloaded os x yosemite? the rainbow circle shows up many times,what can i do? please help

    why is my mac so slow after i downloaded os x yosemite? the rainbow circle shows up many times,what can i do? please help

  • My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd.

    My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd. Earlier I thought this behavior is due to spotlight indexing but it finished after 3 days. I deleted all caches from library. But no luck, still running extremely slow. I checked activity monitor for cpu usage, it shows above 90% is idle. The memory usage always shows PM - 4 GB, Memory Used 3.96 GB, VM - 4 GB, Swaped used 0 bytes, App Memory 1.82 GB, File Cache 1.44 GB, Wired Memory 480 MB.
    Thanks in adavnce for help.

    Was it the combo updater that was installed or the OS X 10.9.3 update. There is a difference.
    MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
    Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
    Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install. So if you think you've got a borked 10.8.4 install from a regular update, just run the 10.8.4 Combo Updater on that system.
    "Delta" updaters can only take you from one version to the next. For example: 10.9.1 to 10.9.2. If somehow the 10.9.2 is missing something it should have, and that something isn't changed between 10.9.1 and 10.9.2 it will still be stale after the delta update.

  • IPad showed iOS notification I declined and it still showed one. All of the sudden after a month it updated?

    iPad showed iOS notification I declined and it still showed one. All of the sudden after a month it updated?

    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
     Cheers, Tom

  • I'm using iPhone 4S and it was working fast once I purchased and after few months I update my phone since to 7.0.1 since then neither my wifi is working nor my Bluetooth and even my phone is working slow, after than many new updates came I did but nothing

    I'm using iPhone 4S and it was working fast once I purchased and after few months I update my phone since to 7.0.1 since then neither my wifi is working nor my Bluetooth and even my phone is working slow, after than many new updates came I did but nothing works. Kindly help me out how to solve this problem.

    Hi Sameer alamgir!
    Here are two articles that can help you troubleshoot these issues with your Wi-Fi and Bluetooth connections:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Late 2012 Mac Mini slow after Yosemite upgrade

    First time on forums - hope Im not asking a questions that has been asked several times before.  I purchased a mac mini not even a year ago, and its was plenty fast until I updated to Yosemite.  I also found a link to Etresoft from another questions and ran it.  For the sake of expediency - Ill go ahead and post the results.  Any thoughts? - all help is more appreciated than I can express in words..
    Problem description:
    Mac running very slow after Yosemite upgrade
    EtreCheck version: 2.1.8 (121)
    Report generated February 8, 2015 at 7:30:25 PM PST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        Mac mini (Late 2012) (Technical Specifications)
        Mac mini - model: Macmini6,1
        1 2.5 GHz Intel Core i5 CPU: 2-core
        12 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                8 GB DDR3 1067 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        Intel HD Graphics 4000
            SMS19A450 1440 x 900 @ 60 Hz
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: one day 23:7:9
    Disk Information: ℹ️
        APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 499.25 GB (240.73 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        VIA Labs, Inc. USB3.0 Hub
            Western Digital My Book 1230 4 TB
            EFI (disk4s1) <not mounted> : 315 MB
            Time Machine (disk4s2) /Volumes/Time Machine : 4.00 TB (2.80 TB free)
            VIA Labs, Inc. USB3.0 Hub
                 hub_device
        Western Digital My Passport 0741 2 TB
            EFI (disk2s1) <not mounted> : 210 MB
            2 T - Passport Drive - User Data (disk2s2) /Volumes/2 T - Passport Drive - User Data : 2.00 TB (1.47 TB free)
        VIA Labs, Inc. USB2.0 Hub
            VIA Labs, Inc. USB2.0 Hub
                 hub_device
                    Apple, Inc. Keyboard Hub
                        Logitech Optical USB Mouse
                        Apple Inc. Apple Keyboard
            MediaTek Inc MT1887 507.9 MB
            disk5s1 (disk5s1) <not mounted> : 32 KB
            JayHoferEDIT2014 (disk5s2) /Volumes/JayHoferEDIT2014 : 502 MB (0 B free)
        Apple, Inc. IR Receiver
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
    Firewire Information: ℹ️
        Seagate FreeAgent FW 800mbit - 800mbit max
            EFI (disk3s1) <not mounted> : 210 MB
            2 T - Fire Drive (disk3s2) /Volumes/2 T - Fire Drive : 2.00 TB (1.61 TB free)
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Anywhere
    Kernel Extensions: ℹ️
            /Applications/Magican.app
        [not loaded]    com.magican.iokit.filemon (1 - SDK 10.7) [Click for support]
        [not loaded]    com.magican.iokit.netmon (1 - SDK 10.7) [Click for support]
            /Library/Application Support/MacKeeper/AntiVirus.app
        [not loaded]    net.kromtech.kext.AVKauth (2.3.7 - SDK 10.9) [Click for support]
        [loaded]    net.kromtech.kext.Firewall (2.3.7 - SDK 10.9) [Click for support]
            /Library/Extensions
        [loaded]    com.karios.driver.DuetDisplay (1 - SDK 10.10) [Click for support]
            /System/Library/Extensions
        [loaded]    com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Click for support]
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.icloud.fmfd.plist
        [killed]    com.apple.security.cloudkeychainproxy.plist
        [killed]    com.apple.telephonyutilities.callservicesd.plist
        [killed]    com.apple.xpc.loginitemregisterd.plist
        5 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.emond.aslmanager.plist
        [killed]    com.apple.wdhelper.plist
        [killed]    com.apple.xpc.smd.plist
        4 processes killed due to memory pressure
    Launch Agents: ℹ️
        [running]    com.brother.LOGINserver.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [running]    com.backblaze.bzserv.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [running]    com.magican.castle.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [running]    com.zeobit.MacKeeper.AntiVirus.plist [Click for support]
        [running]    net.kromtech.MacKeeper.plugin.AntiTheft.daemon.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [running]    com.amazon.music.plist [Click for support]
        [running]    com.backblaze.bzbmenu.plist [Click for support]
        [running]    net.kromtech.MacKeeper.Helper.plist [Click for support]
    User Login Items: ℹ️
        duet    Application  (/Applications/Duet.app)
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Google Drive    Application  (/Applications/Google Drive.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        Google Chrome    Application  (/Applications/Google Chrome.app)
        Box Sync    UNKNOWN  (missing value)
        Knock    Application  (/Applications/Knock.app)
        MagicanMonitor    Application  (/Applications/Magican.app/Contents/Frameworks/MagicanMonitor.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.06 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 25 Check version
    User internet Plug-ins: ℹ️
        Dashlane: Version: Dashlane 1.0.0 - SDK 10.10 [Click for support]
    3rd Party Preference Panes: ℹ️
        Backblaze Backup  [Click for support]
        Flash Player  [Click for support]
        Growl  [Click for support]
        Java  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 499.25 GB Disk used: 258.52 GB
            2 T - Passport Drive - User Data: Disk size: 2.00 TB Disk used: 532.92 GB
        Destinations:
            My Book [Local]
            Total size: 4.00 TB
            Total number of backups: 69
            Oldest backup: 2014-05-28 08:55:42 +0000
            Last backup: 2015-02-09 03:04:24 +0000
            Size of backup disk: Adequate
                Backup size 4.00 TB > (Disk used 791.44 GB X 3)
    Top Processes by CPU: ℹ️
             5%    WindowServer
             4%    MailTab Pro for Gmail
             3%    Google Chrome
             2%    MagicanMonitor
             1%    bztransmit
    Top Processes by Memory: ℹ️
        490 MB    MailTab Pro for Gmail
        412 MB    softwareupdated
        283 MB    AntiVirus
        271 MB    Google Chrome Helper EH
        232 MB    Google Chrome
    Virtual Memory Information: ℹ️
        2.53 GB    Free RAM
        6.05 GB    Active RAM
        1.39 GB    Inactive RAM
        1.70 GB    Wired RAM
        91.14 GB    Page-ins
        154 MB    Page-outs
    Diagnostics Information: ℹ️
        Feb 8, 2015, 08:27:16 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-02-08-082716_[reda cted].crash
        Feb 6, 2015, 08:20:10 PM    Self test - passed
        Feb 6, 2015, 07:49:11 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/DashlaneAgent_2015-02-06-19491 1_[redacted].crash

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
    You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1217 ' 0.5 0.25 10 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1000 80 40 500 300 85 25 20480 262144 20 2000 524288 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays CFBundleIdentifier 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' 'com\\.apple\\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n'"${k[22]}"'%s\n' {Privacy,Mode}': %s\n' '\n   ...and %s more line(s)\n' 'RSSI: %s\nNoise: %s\nTx rate: %s\n' '\nContents of %s\n   '"${k[22]}"'mod date: %s\n   '"${k[22]}"'checksum: %s\n%s\n' '%d MB: %s\n' );b=(com.adobe.{AAM.Updater-1.0{,},AdobeCreativeCloud,CS{4,5}ServiceManager,fpsaud,SwitchBoard{,}} ${k[21]}{aelwriter,{AirPortBaseSt,SafariNotific}ationAgent,FolderActions.enabled,installer.osmessagetracing,mrt.uiagent,ReportCrash.Self,{rp,usb}muxd} com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.daemon{,} com.microsoft.office.licensing.helper com.oracle.java.{Helper-Tool,JavaUpdateHelper{,}} com.teamviewer.{Helper,teamviewer{,_desktop,_service}} org.macosforge.xquartz.{privileged_{,},}startx );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' BEGIN { FS=":";if(system("sw_vers -productVersion|grep -q ^10\.1")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' { sub(/ :/,"");print|"tail -n'${p[10]}'";} ' ' NR==2&&$4<='${p[7]}' { print $4;} ' ' ($1~"wir"&&$2>'${p[22]}')||($1~"uts"&&$2>'${p[19]}') { print $1" "int($2);} ' '|grep DYLD' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q":"$0":"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/ /{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { if(NR<'{${p[14]},${p[21]}}') printf("^/[Sp]|'${k[21]}'");} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print;} END { split("'"${b[*]}"'",b);split("'"${c[*]}"'",c);for(i in b) print b[i]".plist\t"c[i];} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' $2=="=" { gsub(/[()"]/,"",$3);print $3;} ' ' /^\// { sub("/dev/","",$1);printf("%s: %s\n",$1,$9);} ' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1=="op" {m=$3};$1~"lN" {N=$2};$1~"lR" {S=$2};$1~"Tx" {T=$2};$1~/^st/ {s=$2};$1~"li"&&$3!~"wpa2" {printf("'"${f[5]}"'",toupper($3))};END { if(S*N*T&&(S-N<'${p[5]}'||T<'${p[20]}')) printf("'"${f[8]}"'",S,N,T);if(s~/^r/&&m!~/^st/) printf("'"${f[6]}"'",m);} ' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS=":";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n   "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n   "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n   "$5" => "$3" UID ("$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n   "$3" (UID "$4", error "$5"): "$2;} END { u1="Mb/s";u2="per sec";u3="ms/s";u4="KiB/s";u5="%";u6="total";u7="MB";u8="ports";u[1]=u1;u[2]=u1;u[3]=u3;u[4]=u4;u[5]=u5;u[6]=u6;u[7]=u7;u[8]=u8;u[9]=u2;u[10]=u2;u[11]=u2;u[12]=u2;l[1]="Net in";l[2]="Net out";l[3]="I/O wait time";l[4]="I/O requests";l[5]="CPU usage";l[6]="Open files";l[7]="Memory";l[8]="Mach ports";l[9]="File opens";l[10]="Forks";l[11]="Failed forks";l[12]="System errors";for(i in o) print "\n"l[i]" ("u[i]")\n"o[i];} ' ' END{if($3~/[0-9]/)print$3} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[18]}"' "F|getline g) { l++;if(l<=L) f=f"\n   "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n   '"${k[22]}"'"T;printf("'"${f[9]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[18]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[19]}"'\\ :'"${k[16]}"' \""$0"\"/*/'${k[20]}'";p|getline b;close(p);if(b~/ /||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[20]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/:/;s/(\n)c/\1:/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2 \1/p' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/:(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}':/;s/ *: */:/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS=":"} { printf("'"${f[10]}"'",$1/1048576,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[17]}}'/ { getline d;if(d~"t") D=D"\n"$1;} END { print D;} ' ' NR>1&&$3!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $3":"$2;} ' '|tail -n'${p[6]} ' $1>1 { $NF=$NF" x"$1;} /\*/ { if(!f) f="\n\t* Code injection";} { $1="";} 1;END { print f;} ' ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;1s/:/ tree/;/^ +[MPSV].+:../d;s/:$//;p;' 's/,.+"//p' '|grep -q e:/' '/[^ .]/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[18]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' env pluginkit scutil 'dtrace -q -x aggsortrev -n' profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls route egrep 'dscl . -read' );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[20]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|calling|(complet|enabl)ed|ry HD' -k Message CReq 'bad |corru|dead|fail|GPU |hfs: Ru|inval|v_c|NVDA\(|pagin|error|TCON|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0 < 0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno != 0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1:%@d:%s:%d\n\",@a);printa(\"2:%@d:%s:%d\n\",@b);printa(\"9:%@d:%s:%d:%s:%d\n\",@c);printa(\"10:%@d:%s:%d:%d\n\",@d);printa(\"11:%@d:%s:%d:%d\n\",@e);printa(\"12:%@d:%s:%d:%d\n\",@f);printa(\"3:%@d:%s:%d\n\",@g);printa(\"4:%@d:%s:%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{aut*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/{Lau,Sec}*/*t .launchd.conf" list '-F "" -k Sender hidd -k Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' -I --dns -get{dnsservers,info} -P -m\ / '' -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:'}'"' -name\ kMDItem${k[16]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[16]} :CFBundleDisplayName $EUID {,'/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s $TMPDIR../C -type f -size +'${p[11]}'M -exec stat -f'%z:%N' {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' "-o ',\"name\":\"[^\"]+' L*/A*/Fi*/P*/*/a*.json" users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$Sender \$(RefProc): \$Message" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "sandbox ex" ' );N1=${#c2[@]};for j in {0..15};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console}\ log Activity SMC Login\ hook 'I/O per process' 'High file counts' UID Daemons Agents XPC\ cache Startup\ items {Admin,Root}\ access Bundles {,Inserted\ }dylibs Stylesheet Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ {caches/logs,overrides} Shutdown\ codes Heat Diagnostic\ reports Bad\ plists Free\ space VM );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D${i}0'(){ A'$i' $@;C0;};';for j in 2 3;do eval D$i$j'(){ local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D10 0 N1+1 2;D10 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D12 22 15 63;D10 0 N1+2 3;D10 0 N1+15 17;D13 3 0 N1+3 4;D13 4 0 N1+4 5;D13 N3+4 0 N1+9 59;for i in 0 1 2;do D13 N3+i 0 N1+5+i 6;done;D13 N3+3 0 N1+8 71;D13 62 1 10 7;D13 10 1 11 8;B2&&D13 18 19 53 67;D12 11 2 12 9;D12 12 3 13 10;D12 13 42 70 101 25;D12 65 6 36 13;D12 45 20 52 66;D13 66 7 37 14;D13 17 8 15 38;D10 9 16 16 77 45;C4;B2&&D10 35 49 61 75 76 78 45;B2&&{ D10 28 17 45;C4;};D10 12 40 54 16 79 45;D10 12 39 54 16 80 45;D13 31 25 37 15;B2&&D13 19 21 0;B2&&D13 40 10 42;B2&&D12 2 29 35 46;D12 44 34 43 53;D12 25 22 20 32;D12 33 0 N1+14 51;D12 34 21 28 35;D13 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D13 50 38 5 68;B4 19 0;D23 37 33 34 42;B2&&D13 46 35 45 55;D13 38 32 31 43;B2&&D13 59 4 65 76 91;D13 63 4 19 44 75 95 96;B1&&{ D13 53 5 55 75 69&&D13 51 6 58 31;D13 56 5 56 97 75 98&&D10 0 N1+7 99;D12 55 5 27 84;D13 61 5 54 75 70;D13 14 5 14 12;D13 15 5 72 12;C4;};D13 16 5 73 12;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 20;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 6 6 73 102;B2&&{ A1 18 26 94;B7 6;B4 0 0 11;C3 23;};A1 18 26 94;B7 6;B4 0 0 11;C3 24;D13 60 14 66 92;D13 58 14 67 93;D13 26 4 21 24;D13 42 14 1 62;D13 43 37 2 90 48;D13 41 10 42;D12 48 36 47 25;A1 4 3 60&&{ B3 5;A2 14 61;B4 0 6 21;B4 5 0;A2 14 62;B4 0 0 21;B6 0 6 4;C3 5;};D13 9 41 69 100;D12 32 21 68 35;D12 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D13 54 5 7 75 76 69;D13 52 5 8 75 76 69;D13 57 4 64 76 91;D12 0 4 4 84;D12 1 4 51 84;D13 21 22 9 37;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D20 31 47;D13 64 4 71 41;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 29;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 16;A1 26 50 64;B7 16;C3 6;D13 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
    [Process started]
            Part 1 of 8 done at … sec
            Part 8 of 8 done at … sec
            The results are on the Clipboard.
            Please close this window.
    [Process completed]
    The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
    Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it. Then go to the next step.
    12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
    Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Mac Running Slow after Yosemite

    I have upgraded this machine but now applications hang.  I have cleared the cache, deleted applications such as Chrome, repaired  permissions and turned off any start up applications.
    This is the EtreCheck output.  I am not sure how to read it - are there other items I should delete or amend?  Thanks
    EtreCheck version: 2.0.8 (95)
    Report generated 30 October 2014 19:21:03 GMT
    Hardware Information: ℹ️
      iMac (21.5-inch, Mid 2010) (Verified)
      iMac - model: iMac11,2
      1 3.2 GHz Intel Core i3 CPU: 2-core
      8 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1067 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1067 MHz ok
      BANK 0/DIMM1
      2 GB DDR3 1067 MHz ok
      BANK 1/DIMM1
      2 GB DDR3 1067 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      ATI Radeon HD 5670 - VRAM: 512 MB
      iMac 1920 x 1080
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 0:16:44
    Disk Information: ℹ️
      WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 732.85 GB (85.41 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      BOOTCAMP (disk0s4) /Volumes/BOOTCAMP : 266.49 GB (165.37 GB free)
      OPTIARC DVD RW AD-5680H 
    USB Information: ℹ️
      Apple Computer, Inc. IR Receiver
      Apple Inc. Built-in iSight
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Internal Memory Card Reader
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Applications/Karabiner.app
      [not loaded] org.pqrs.driver.Karabiner (10.4.0 - SDK 10.9) Support
      /System/Library/Extensions
      [loaded] com.Cycling74.driver.Soundflower (1.5.2) Support
      [not loaded] com.canon.cups.fax.print.kext.usbprintclass (4.0.0 - SDK 10.5) Support
      [not loaded] com.devguru.driver.SamsungComposite (1.2.44 - SDK 10.6) Support
      /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
      [not loaded] com.devguru.driver.SamsungACMControl (1.2.44 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungACMData (1.2.44 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungMTP (1.2.44 - SDK 10.5) Support
      [not loaded] com.devguru.driver.SamsungSerial (1.2.44 - SDK 10.6) Support
    Startup Items: ℹ️
      HW_CreateNetwork: Path: /Library/StartupItems/HW_CreateNetwork
      HWPortDetect_driver: Path: /Library/StartupItems/HWPortDetect_driver
      Startup items are obsolete and will not work in future versions of OS X
    Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist Support
      [running] jp.co.canon.CUPSCMFP.BG.plist Support
      [running] jp.co.canon.ScanGearMF.appl.Canon-MF-Scan-Agent.plist Support
      [running] jp.co.canon.UFR2.BG.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.skype.skypeinstaller.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist Support
      [running] com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
    User Login Items: ℹ️
      Dropbox Application (/Applications/Dropbox.app)
    Internet Plug-ins: ℹ️
      Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
      Default Browser: Version: 600 - SDK 10.10
      SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
      GarminGpsControl: Version: 2.9.3.0 Release Support
      iPhotoPhotocast: Version: 7.0
    User Internet Plug-ins: ℹ️
      Picasa: Version: 1.0 Support
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Flip4Mac WMV  Support
      Growl  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 732.85 GB Disk used: 647.44 GB
      Destinations:
      Time Capsule [Local]
      Total size: 999.86 GB
      Total number of backups: 43
      Oldest backup: 2014-09-21 13:15:59 +0000
      Last backup: 2014-10-30 18:19:13 +0000
      Size of backup disk: Too small
      Backup size 999.86 GB < (Disk used 647.44 GB X 3)
    Top Processes by CPU: ℹ️
          13% mds
          4% com.apple.WebKit.WebContent
          2% WindowServer
          1% Safari
          1% AppleSpell
    Top Processes by Memory: ℹ️
      180 MB com.apple.WebKit.WebContent
      146 MB iTunes
      112 MB mds_stores
      103 MB Microsoft Word
      86 MB Safari
    Virtual Memory Information: ℹ️
      5.30 GB Free RAM
      2.13 GB Active RAM
      349 MB Inactive RAM
      814 MB Wired RAM
      1.53 GB Page-ins
      0 B Page-outs

    You do not need to use cleaning programs. They can destroy your computer operation as they may already have done.
    CleanMyMac - Uninstall
    CleanMyMac2 Un-install
    After un-installing, run thos program to make sure you got all the pieces.
    EasyFind – Spotlight Replacement
    Activity Monitor - Mavericks  also Yosemite
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy

  • My mac is slow after installing Yosemite

    Problem description:
    mac slow after upgrade to yosemite
    EtreCheck version: 2.1 (101)
    Report generated December 4, 2014 at 11:16:26 PM EST
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Mid 2010) (Verified)
      MacBook Pro - model: MacBookPro6,2
      1 2.4 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1067 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1067 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics - VRAM: 288 MB
      Color LCD 1440 x 900
      NVIDIA GeForce GT 330M - VRAM: 256 MB
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 1:3:5
    Disk Information: ℹ️
      TOSHIBA MK3255GSXF disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) / : 318.84 GB (206.05 GB free)
      Encrypted AES-XTS Unlocked
      Core Storage: disk0s2 319.21 GB Online
      HL-DT-ST DVDRW  GS23N 
    USB Information: ℹ️
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Internal Memory Card Reader
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
      Apple Inc. Built-in iSight
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Adware: ℹ️
      Geneio [Remove]
    Kernel Extensions: ℹ️
      /Incompatible Software/Parallels Service.app
      [not loaded] com.parallels.kext.prl_hid_hook (7.0 15094.749908) [Support]
      [not loaded] com.parallels.kext.prl_hypervisor (7.0 15094.749908) [Support]
      [not loaded] com.parallels.kext.prl_netbridge (7.0 15094.749908) [Support]
      [not loaded] com.parallels.kext.prl_usb_connect (7.0 15094.749908) [Support]
      [not loaded] com.parallels.kext.prl_vnic (7.0 15094.749908) [Support]
      /System/Library/Extensions
      [not loaded] com.wacom.kext.pentablet (5.2.6) [Support]
    Launch Agents: ℹ️
      [running] com.brother.LOGINserver.plist [Support]
      [invalid?] com.cisco.anyconnect.gui.plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [loaded] com.oracle.java.Java-Updater.plist [Support]
      [running] com.wacom.pentablet.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [running] com.cisco.anyconnect.vpnagentd.plist [Support]
      [loaded] com.google.keystone.daemon.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [loaded] com.oracle.java.Helper-Tool.plist [Support]
      [loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
    User Launch Agents: ℹ️
      [invalid?] com.adobe.ARM.[...].plist [Support]
      [loaded] com.genieo.completer.download.plist Adware! [Remove]
      [loaded] com.genieo.completer.update.plist Adware! [Remove]
      [not loaded] info.lokiware.attachmenttamer.cleanup.plist [Support]
      [invalid?] info.lokiware.attachmenttamer.setupagent.plist [Support]
    User Login Items: ℹ️
      FreeScreenSharing Application (/Users/[redacted]/Desktop/FreeScreenSharing.app)
      Dropbox ApplicationHidden (/Applications/Dropbox.app)
    Internet Plug-ins: ℹ️
      2XClient: Version: Unknown
      FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
      JavaAppletPlugin: Version: Java 7 Update 65 Check version
      Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
      Default Browser: Version: 600 - SDK 10.10
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 [Support]
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Support]
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
    userinternetplugins ℹ️
      CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
      FreeScreenSharingPlugin: Version: Unknown - SDK 10.9 [Support]
    Safari Extensions: ℹ️
      OpenIE
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
      Java  [Support]
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          14% mds
          4% WindowServer
          0% fontd
          0% AppleSpell
          0% Dropbox
    Top Processes by Memory: ℹ️
      185 MB mds_stores
      137 MB Finder
      129 MB Mail
      125 MB WindowServer
      116 MB Safari
    Virtual Memory Information: ℹ️
      354 MB Free RAM
      2.00 GB Active RAM
      948 MB Inactive RAM
      855 MB Wired RAM
      1.78 GB Page-ins
      213 KB Page-outs
    Diagnostics Information: ℹ️
      Dec 4, 2014, 10:13:56 PM Self test - passed

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Mac Pro slow after upgrade to 10.5.5

    I got a certified Mac Pro a few month ago. It worked pretty fast in the beginning but then the performance slowed down. I called the Apple support and they just told me to upgrade from 10.5.4 to 10.5.5. But now my Mac is even slower than before; especially start up time takes a while.
    Also, when I do "Disk Utility – Repair Disk permission" I get these errors now:
    OwnerGroupTool" has been modified and will not be repaired.
    Warning: SUID file "usr/bin/lppasswd" has been modified and will not be repaired.
    Group differs on "private/etc/cups", should be 0, group is 26.
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    Can anyone help?

    Hi and thank you very much for all your suggestions!
    I'm really not a Mac expert. In my company we always had a technican. Now I'm working from home and need to deal with the technical stuff by myself. So please forgive me my answers below:
    Run Disk Warrior.
    OK – I don't have this program but I guess it is worth to buy (?)
    Clone your drive with SuperDuper or Disk Utility Restore.
    I found Disk Utility Restore. It says to copy a disk, drag the it from the list on the left. Should I drag the HD symbol in the destination field? What does actually happen when I clone my HD?
    Never repair permissions booted from an older version,, that includes not using the OS X DVD, it will not set permissions properly.
    OK – thanks
    What do you mean by slower. Just startup? how many boot drives are connected? and have you reset startup disk? do you have Windows installed?
    Yes starting up is slower, but funily not always. And the general handling in programs. It's not so slow that it would bother me a lot. I just wondered if I could have the performance how it was in the beginning.
    One boot drive; I guess.
    No, I haven't reset startup disk. How do I do this?
    No Windows installed
    What did you change or install (hardware or software) at the time it slowed down?
    Just the update to 10.5.5
    Always keep a backup copy you can boot from before you apply updates so you can go back easily to 10.5.4.
    Thanks – I didn't do this
    Make sure you have an alternate boot drive used just for doing maintenance and repairs where you can run Disk Utility, Warrior, TechTool Pro. I would also delete manually the two top level /Library/Caches folders along with extensions.mkext.
    Sorry – What exactly is alternate boot drive?
    Some messages from Disk Utility can be ignored.
    Are some messages serious?

  • My mac is slow after yosemite. What ever i do it keeps loading

    mMy mac is slow.
    It keeps loading
    17/12/14 03.11.26,826 Unknown[4921]: com.apple.message.domain: com.apple.assumes.failure
    com.apple.message.signature: 9437C02E-A07B-38C8-91CB-299FAA63083D:97940
    com.apple.message.signature2: 0x89
    com.apple.message.signature3: libxpc.dylib
    com.apple.message.summarize: YES
    SenderMachUUID: 33C3024A-4A16-3485-B2B1-89FA33B9558A
    17/12/14 03.13.48,205 spindump[445]: com.apple.message.domain: com.apple.crashreporter.writereport.hang
    com.apple.message.signature: com.apple.WebKit.WebContent
    com.apple.message.signature2: UNBUNDLED ||| 10600 (10600.2.5) ((null))
    com.apple.message.signature3: hang
    com.apple.message.result: noop
    com.apple.message.summarize: YES
    SenderMachUUID: B37DA875-044F-36A3-9B9E-A21DE5C75C52
    17/12/14 03.14.43,548 WindowServer[184]: com.apple.message.session: 4A1472A7-0E31-4AFE-BC6D-08A3C242774D
    com.apple.message.spaces_mode: per-display
    com.apple.message.owner: 906
    com.apple.message.user_spaces_used: NO
    com.apple.message.config: Laptop
    com.apple.message.on_console: YES
    com.apple.message.display_setup: Single
    com.apple.message.fullscreen.uuid: 32A5FA59-BFC4-4D74-BC96-D2865E859F76
    com.apple.message.fullscreen.bundle.id: com.apple.Safari
    com.apple.message.fullscreen.bundle.version: 8.0.2 (10600.2.5)
    com.apple.message.fullscreen.process: Safari
    com.apple.message.domain: com.apple.windowserver.session.spaces.fullscreen.end
    SenderMachUUID: DE442EA4-37E9-305A-849A-B9A9D8C57AD2
    17/12/14 03.14.53,699 spindump[445]: com.apple.message.domain: com.apple.crashreporter.writereport.hang
    com.apple.message.signature: Safari
    com.apple.message.signature2: UNBUNDLED ||| 8.0.2 (10600.2.5) ((null))
    com.apple.message.signature3: hang
    com.apple.message.result: noop
    com.apple.message.summarize: YES
    SenderMachUUID: B37DA875-044F-36A3-9B9E-A21DE5C75C52
    17/12/14 03.15.03,668 SubmitDiagInfo[2536]: Spent 1.024610 seconds sending 1 diagnostic files totaling 107202 bytes
    OSActivityID: 0x000001ac00000003
    com.apple.message.domain: com.apple.SubmitDiagInfo.SubmissionTime
    com.apple.message.value: 1
    com.apple.message.value2: 107202
    com.apple.message.value3: 1.024610
    SenderMachUUID: 71B4F5DA-0D3D-3468-93C2-CD52E1185606
    17/12/14 03.15.08,625 WindowServer[184]: com.apple.message.session: 4A1472A7-0E31-4AFE-BC6D-08A3C242774D
    com.apple.message.spaces_mode: per-display
    com.apple.message.owner: 906
    com.apple.message.user_spaces_used: NO
    com.apple.message.config: Laptop
    com.apple.message.on_console: YES
    com.apple.message.display_setup: Single
    com.apple.message.fullscreen.uuid: 5A3201FF-F930-4C7C-AF20-1695D8531DFA
    com.apple.message.fullscreen.bundle.id: com.apple.Safari
    com.apple.message.fullscreen.bundle.version: 8.0.2 (10600.2.5)
    com.apple.message.fullscreen.process: Safari
    com.apple.message.domain: com.apple.windowserver.session.spaces.fullscreen.begin
    SenderMachUUID: DE442EA4-37E9-305A-849A-B9A9D8C57AD2
    17/12/14 03.17.07,077 loginwindow[66]: com.apple.message.domain: com.apple.BezelServices.IdleTimer
    com.apple.message.result: pass
    SenderMachUUID: C6C1FCD6-5FBA-3B2D-9322-367F697EDAAA
    17/12/14 03.18.01,698 powerd[26]: SCPreferences(Power Management configd plugin:com.apple.PowerManagement.xml) lock held for 13.689 seconds
    com.apple.message.domain: com.apple.SystemConfiguration.SCPreferencesUnlock
    com.apple.message.signature: Power Management configd plugin
    com.apple.message.signature2: com.apple.PowerManagement.xml
    com.apple.message.value: 13.689
    SenderMachUUID: 1F97CC0A-F1D6-3A56-BA08-E644AD7CCF82
    17/12/14 03.18.46,288 Unknown[5006]: com.apple.message.domain: com.apple.assumes.failure
    com.apple.message.signature: 9437C02E-A07B-38C8-91CB-299FAA63083D:97940
    com.apple.message.signature2: 0x89
    com.apple.message.signature3: libxpc.dylib
    com.apple.message.summarize: YES
    SenderMachUUID: 33C3024A-4A16-3485-B2B1-89FA33B9558A
    17/12/14 03.19.49,876 powerd[26]: SCPreferences(Power Management configd plugin:com.apple.PowerManagement.xml) lock held for 1.867 seconds
    com.apple.message.domain: com.apple.SystemConfiguration.SCPreferencesUnlock
    com.apple.message.signature: Power Management configd plugin
    com.apple.message.signature2: com.apple.PowerManagement.xml
    com.apple.message.value: 1.867
    SenderMachUUID: 1F97CC0A-F1D6-3A56-BA08-E644AD7CCF82
    17/12/14 03.21.18,797 powerd[26]: SCPreferences(Power Management configd plugin:com.apple.PowerManagement.xml) lock held for 30.714 seconds
    com.apple.message.domain: com.apple.SystemConfiguration.SCPreferencesUnlock
    com.apple.message.signature: Power Management configd plugin
    com.apple.message.signature2: com.apple.PowerManagement.xml
    com.apple.message.value: 30.714
    SenderMachUUID: 1F97CC0A-F1D6-3A56-BA08-E644AD7CCF82
    17/12/14 03.21.57,470 powerd[26]: SCPreferences(Power Management configd plugin:com.apple.PowerManagement.xml) lock held for 9.388 seconds
    com.apple.message.domain: com.apple.SystemConfiguration.SCPreferencesUnlock
    com.apple.message.signature: Power Management configd plugin
    com.apple.message.signature2: com.apple.PowerManagement.xml
    com.apple.message.value: 9.388
    SenderMachUUID: 1F97CC0A-F1D6-3A56-BA08-E644AD7CCF82
    17/12/14 03.23.57,068 loginwindow[66]: com.apple.message.domain: com.apple.BezelServices.IdleTimer
    com.apple.message.result: pass
    SenderMachUUID: C6C1FCD6-5FBA-3B2D-9322-367F697EDAAA
    17/12/14 03.24.04,291 powerd[26]: SCPreferences(Power Management configd plugin:com.apple.PowerManagement.xml) lock held for 16.281 seconds
    com.apple.message.domain: com.apple.SystemConfiguration.SCPreferencesUnlock
    com.apple.message.signature: Power Management configd plugin
    com.apple.message.signature2: com.apple.PowerManagement.xml
    com.apple.message.value: 16.281
    SenderMachUUID: 1F97CC0A-F1D6-3A56-BA08-E644AD7CCF82
    17/12/14 03.24.11,526 Safari[4993]: com.apple.message.domain: com.apple.Safari.Search2
    com.apple.message.summarize: YES
    SenderMachUUID: 2225AE13-780E-3234-9A05-9DD6D94EE96C
    17/12/14 03.24.49,649 powerd[26]: SCPreferences(Power Management configd plugin:com.apple.PowerManagement.xml) lock held for 1.607 seconds
    com.apple.message.domain: com.apple.SystemConfiguration.SCPreferencesUnlock
    com.apple.message.signature: Power Management configd plugin
    com.apple.message.signature2: com.apple.PowerManagement.xml
    com.apple.message.value: 1.607
    SenderMachUUID: 1F97CC0A-F1D6-3A56-BA08-E644AD7CCF82
    17/12/14 03.27.20,022 powerd[26]: SCPreferences(Power Management configd plugin:com.apple.PowerManagement.xml) lock held for 32.013 seconds
    com.apple.message.domain: com.apple.SystemConfiguration.SCPreferencesUnlock
    com.apple.message.signature: Power Management configd plugin
    com.apple.message.signature2: com.apple.PowerManagement.xml
    com.apple.message.value: 32.013
    SenderMachUUID: 1F97CC0A-F1D6-3A56-BA08-E644AD7CCF82
    17/12/14 03.28.02,797 powerd[26]: SCPreferences(Power Management configd plugin:com.apple.PowerManagement.xml) lock held for 14.787 seconds
    com.apple.message.domain: com.apple.SystemConfiguration.SCPreferencesUnlock
    com.apple.message.signature: Power Management configd plugin
    com.apple.message.signature2: com.apple.PowerManagement.xml
    com.apple.message.value: 14.787
    SenderMachUUID: 1F97CC0A-F1D6-3A56-BA08-E644AD7CCF82
    17/12/14 03.29.18,768 powerd[26]: SCPreferences(Power Management configd plugin:com.apple.PowerManagement.xml) lock held for 30.758 seconds
    com.apple.message.domain: com.apple.SystemConfiguration.SCPreferencesUnlock
    com.apple.message.signature: Power Management configd plugin
    com.apple.message.signature2: com.apple.PowerManagement.xml
    com.apple.message.value: 30.758
    SenderMachUUID: 1F97CC0A-F1D6-3A56-BA08-E644AD7CCF82
    17/12/14 03.30.11,462 loginwindow[66]: com.apple.message.domain: com.apple.BezelServices.IdleTimer
    com.apple.message.result: pass
    SenderMachUUID: C6C1FCD6-5FBA-3B2D-9322-367F697EDAAA
    17/12/14 03.30.51,431 powerd[26]: SCPreferences(Power Management configd plugin:com.apple.PowerManagement.xml) lock delayed for 3.422 seconds
    com.apple.message.domain: com.apple.SystemConfiguration.SCPreferencesLock
    com.apple.message.signature: Power Management configd plugin
    com.apple.message.signature2: com.apple.PowerManagement.xml
    com.apple.message.value: 3.422
    SenderMachUUID: 1F97CC0A-F1D6-3A56-BA08-E644AD7CCF82
    17/12/14 03.30.51,432 loginwindow[66]: com.apple.message.domain: com.apple.BezelServices.BezelKeySet1
    com.apple.message.value: 3
    com.apple.message.value2: 0
    com.apple.message.value3: 0
    com.apple.message.value4: 0
    SenderMachUUID: C6C1FCD6-5FBA-3B2D-9322-367F697EDAAA
    17/12/14 03.30.51,432 loginwindow[66]: com.apple.message.domain: com.apple.BezelServices.BezelKeySet2
    com.apple.message.value: 22
    com.apple.message.value2: 0
    com.apple.message.value3: 0
    SenderMachUUID: C6C1FCD6-5FBA-3B2D-9322-367F697EDAAA
    17/12/14 03.32.15,270 powerd[26]: SCPreferences(Power Management configd plugin:com.apple.PowerManagement.xml) lock delayed for 27.260 seconds
    com.apple.message.domain: com.apple.SystemConfiguration.SCPreferencesLock
    com.apple.message.signature: Power Management configd plugin
    com.apple.message.signature2: com.apple.PowerManagement.xml
    com.apple.message.value: 27.260
    SenderMachUUID: 1F97CC0A-F1D6-3A56-BA08-E644AD7CCF82
    17/12/14 03.33.13,147 powerd[26]: SCPreferences(Power Management configd plugin:com.apple.PowerManagement.xml) lock held for 25.137 seconds
    com.apple.message.domain: com.apple.SystemConfiguration.SCPreferencesUnlock
    com.apple.message.signature: Power Management configd plugin
    com.apple.message.signature2: com.apple.PowerManagement.xml
    com.apple.message.value: 25.137
    SenderMachUUID: 1F97CC0A-F1D6-3A56-BA08-E644AD7CCF82
    17/12/14 03.33.57,946 spindump[445]: com.apple.message.domain: com.apple.crashreporter.writereport.hang
    com.apple.message.signature: Activity Monitor
    com.apple.message.signature2: UNBUNDLED ||| 10.10.0 (968) ((null))
    com.apple.message.signature3: hang
    com.apple.message.result: noop
    com.apple.message.summarize: YES
    SenderMachUUID: B37DA875-044F-36A3-9B9E-A21DE5C75C52
    17/12/14 03.34.55,136 powerd[26]: SCPreferences(Power Management configd plugin:com.apple.PowerManagement.xml) lock delayed for 7.063 seconds
    com.apple.message.domain: com.apple.SystemConfiguration.SCPreferencesLock
    com.apple.message.signature: Power Management configd plugin
    com.apple.message.signature2: com.apple.PowerManagement.xml
    com.apple.message.value: 7.063
    SenderMachUUID: 1F97CC0A-F1D6-3A56-BA08-E644AD7CCF82
    17/12/14 03.35.49,082 powerd[26]: SCPreferences(Power Management configd plugin:com.apple.PowerManagement.xml) lock held for 1.053 seconds
    com.apple.message.domain: com.apple.SystemConfiguration.SCPreferencesUnlock
    com.apple.message.signature: Power Management configd plugin
    com.apple.message.signature2: com.apple.PowerManagement.xml
    com.apple.message.value: 1.053
    SenderMachUUID: 1F97CC0A-F1D6-3A56-BA08-E644AD7CCF82
    17/12/14 03.36.01,854 loginwindow[66]: com.apple.message.domain: com.apple.BezelServices.IdleTimer
    com.apple.message.result: pass
    SenderMachUUID: C6C1FCD6-5FBA-3B2D-9322-367F697EDAAA
    17/12/14 03.36.57,373 powerd[26]: SCPreferences(Power Management configd plugin:com.apple.PowerManagement.xml) lock held for 9.363 seconds
    com.apple.message.domain: com.apple.SystemConfiguration.SCPreferencesUnlock
    com.apple.message.signature: Power Management configd plugin
    com.apple.message.signature2: com.apple.PowerManagement.xml
    com.apple.message.value: 9.363
    SenderMachUUID: 1F97CC0A-F1D6-3A56-BA08-E644AD7CCF82
    17/12/14 03.37.49,124 powerd[26]: SCPreferences(Power Management configd plugin:com.apple.PowerManagement.xml) lock held for 1.114 seconds
    com.apple.message.domain: com.apple.SystemConfiguration.SCPreferencesUnlock
    com.apple.message.signature: Power Management configd plugin
    com.apple.message.signature2: com.apple.PowerManagement.xml
    com.apple.message.value: 1.114
    SenderMachUUID: 1F97CC0A-F1D6-3A56-BA08-E644AD7CCF82
    17/12/14 03.40.50,030 powerd[26]: SCPreferences(Power Management configd plugin:com.apple.PowerManagement.xml) lock held for 2.020 seconds
    com.apple.message.domain: com.apple.SystemConfiguration.SCPreferencesUnlock
    com.apple.message.signature: Power Management configd plugin
    com.apple.message.signature2: com.apple.PowerManagement.xml
    com.apple.message.value: 2.020
    SenderMachUUID: 1F97CC0A-F1D6-3A56-BA08-E644AD7CCF82
    17/12/14 03.41.27,646 loginwindow[66]: com.apple.message.domain: com.apple.BezelServices.IdleTimer
    com.apple.message.result: pass
    SenderMachUUID: C6C1FCD6-5FBA-3B2D-9322-367F697EDAAA
    17/12/14 03.41.59,720 powerd[26]: SCPreferences(Power Management configd plugin:com.apple.PowerManagement.xml) lock held for 11.710 seconds
    com.apple.message.domain: com.apple.SystemConfiguration.SCPreferencesUnlock
    com.apple.message.signature: Power Management configd plugin
    com.apple.message.signature2: com.apple.PowerManagement.xml
    com.apple.message.value: 11.710
    SenderMachUUID: 1F97CC0A-F1D6-3A56-BA08-E644AD7CCF82
    17/12/14 03.43.05,453 powerd[26]: SCPreferences(Power Management configd plugin:com.apple.PowerManagement.xml) lock held for 17.442 seconds
    com.apple.message.domain: com.apple.SystemConfiguration.SCPreferencesUnlock
    com.apple.message.signature: Power Management configd plugin
    com.apple.message.signature2: com.apple.PowerManagement.xml
    com.apple.message.value: 17.442
    SenderMachUUID: 1F97CC0A-F1D6-3A56-BA08-E644AD7CCF82
    17/12/14 03.45.11,718 powerd[26]: SCPreferences(Power Management configd plugin:com.apple.PowerManagement.xml) lock held for 23.709 seconds
    com.apple.message.domain: com.apple.SystemConfiguration.SCPreferencesUnlock
    com.apple.message.signature: Power Management configd plugin
    com.apple.message.signature2: com.apple.PowerManagement.xml
    com.apple.message.value: 23.709
    SenderMachUUID: 1F97CC0A-F1D6-3A56-BA08-E644AD7CCF82
    17/12/14 03.45.19,758 Unknown[5069]: com.apple.message.domain: com.apple.assumes.failure
    com.apple.message.signature: 9437C02E-A07B-38C8-91CB-299FAA63083D:97940
    com.apple.message.signature2: 0x89
    com.apple.message.signature3: libxpc.dylib
    com.apple.message.summarize: YES
    SenderMachUUID: 33C3024A-4A16-3485-B2B1-89FA33B9558A

    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

  • System gets Slow after 10.6.5 update

    So, I just updated it using standalone combo installer and straight away notice that to repair the disc permitions now takes 3 mins, before it took only 1min. even if there is nothing to repair. and futher more my whole system gets very slow after a few hours of using safari, skype, vuze, together and wasn't able to shut down just after using safari alone, had to press the power. havent been using anything else for so long so dont know how about it, but it seems to be ok. ah, im using airport to get to the internet if that's important.

    See:
    Mac Maintenance Quick Assist,
    Mac OS X speed FAQ,
    Speeding up Macs,
    Macintosh OS X Routine Maintenance
    Essential Mac Maintenance: Get set up,
    Essential Mac Maintenance: Rev up your routines,
    Maintaining OS X,
    Five Mac maintenance myths, and
    Myths of required versus not required maintenance for Mac OS X for information.

  • Network slow after 10.4.5 update

    Hi there, after installing the 10.4.5 update my PowerBook 12" is really slow when accessing network services. Web, Mail are impossibly slow.
    I have a cable modem broadband connection with a Belkin wireless router sharing the connection. The laptop connects via Airport and uses DHCP for autoconfiguration.
    I have tried the fix suggested on MacFixit of putting the DNS manually in the TCP/IP settings. Also I have turned off IPv6 which was also suggested to no avail.
    My other laptops with earlier system revisions are running fine (I am using one to write this) and I have tried the Mac on another network with the same effect so it has to be something that 10.4.5 has done to my poor alubook
    Can anyone help please.
    PowerBook 12" 867Mhz 1.12GB RAM   Mac OS X (10.4.5)  

    This was offered by MacFixit: Friday, February 24 2006 @ 09:30 AM PST
    Mac OS X 10.4.5 (#9): Another fix for network slowness -- re-applying the combo updater; SIIG FireWire card not working; more
    Another fix for network slowness -- re-applying the combo updater Over the past few days we've outlined a number of fixes for network slowness that occurs after the update to Mac OS X 10.4.5, including entry of a DNS address, toggling of IPv6 and more.
    We've now received notes indicating that a tried and true workaround for various issues -- re-applying the Mac OS X 10.4.5 combo updater (as noted in our general workarounds for 10.4.5) -- can have beneficial effects in this case as well.
    MacFixIt reader Fred Moore writes:
    "After much thrashing about and wasted time, I appear to have solved both the slow web page loading as well as my email sending problems in one stroke. Guess how: download the Mac OS X 10.4.5 combo updater and reapply it. This nonsense has cost me a lot of time but everything seems to work now. IPv6 is set back to Automatic, there is no entry in the Network prefs DNS server field, and my email sending works perfectly (so far; I've sent a bunch of tests). Why didn't I just download the combo updater and apply from my hard drive at the beginning? Well, Software Update should (yes, I know, I know...) work. I'll never again use Software Update for a system update."

  • Junk mail function slow after 10.4.8 update

    I upgraded to 10.4.8 yesterday. Since then, whenever I mark a message as junk or change the junk setting on a message that is in the junk folder, I go into major beach ball mode. Have anyone else experienced this?

    Problems arising right after installing a system update are usually the result of not having installed the update properly, so let's first make sure that the update is properly installed.
    Verify/repair your disk (not just permissions), as described here:
    The Repair functions of Disk Utility: what's it all about?
    After having fixed all filesystem issues, if any, reinstall the update using the Combo installer:
    About the Mac OS X 10.4.8 Combo Update
    Mac OS X 10.4.8 Combo Update for PPC
    Mac OS X 10.4.8 Combo Update for Intel
    You may also want to take a look at the following articles for guidelines on how to properly install system updates:
    Troubleshooting installation and software updates
    Installing software updates
    Basically, you should verify/repair the startup disk before installing the update, and no applications should be running while installing it.

  • Running slow after downloading a mandatory update

    running slow after downloading an update!
    I had zero complaints until today when I downloaded an update and restarted my machine.
    Now It feels like I'm back in the PC world.
    Any suggestions?

    If it is Safari loading web pages slowly, I would suggest http://support.apple.com/kb/ts3230 or http://support.apple.com/kb/TS1594, one of these will surely help. If not, as previously suggested, more detail will greatly help.

  • IPhoto slideshow is very very very slow after the latest software update

    As the subject states, iPhoto slideshows are very slow: after clicking on the slideshow-button first nothing happens, after a while the screen goes black (that lasts about a minute or so) and the (finally) the slideshow starts. which is very annoying because it displays no options screen at first as it used to do, it just starts using very annoying standard music... quitting slideshow again to go to the options menu takes ages!! this problem started after the latest software update... way to go Apple...
    suggestions anyone?!

    EelcoR
    Welcome to the Apple Discussions.
    Well I haven’t seen this problem.
    Start with the troubleshooting basics:
    1. Delete the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    2. Repair Permissions using Disk Utility
    3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
    Regards
    TD

Maybe you are looking for

  • Uninstalling and re-installing

    If I uninstall and then reinstall Itunes, will I lose all my purchased music?

  • Use of keyboard

    Hello, My name is Gunner Hodgson and I recently started using a Macbook Pro. To start with, I would like to say that I love it. I also purchased the Apple Pro Keyboard, because as a student I have to type 10 page essays and I don't want to get carpel

  • Java.lang.NoClassDefFoundError: xmlbeans/apache/org/tool/SchemaCompiler

    Hi, I try to compile my schema files using scomp in this directory: xmlbeans\xkit\bin. I followed the following instructions to set up env: * Create an XMLBEANDIR environment variable and point it to the directory containing xbean.jar. In the example

  • NAT7210 to host data transmission problem

    Hello! Years ago, our company developed a GPIB interface board, using a NAT7210 GPIB controller which is hosted by an Atmel 8 bit MCU. For a test, the board is connected to a NI GPIB PCI interface, using MAX and NI-488 Communicator for communication.

  • Getting wierd artifacts when tring to render in sorenson 3.

    ok, so im tring to render out a dvntsc sequence in sorenson 3 codec. each time i due im getting very odd artifacts on almost ever clip in the sequence. has anyone had this happen to them? any one know whats wrong?