All Mail accounts offline and won't come back

Suddenly this morning, all accounts (4) on my main, desk, computer went off line. Nothing I do brings them back. I've reset all login credentials and am out of ideas.
- I've checked with my ISP and they find nothing wrong
- other emails in our domain still working
- in fact, the mail is coming in on my other devices -- iPad, iPhone, Air, etc. (so it's not the server, clearly)
I'm left to think the Mail app on this one computer has something wrong.
Anybody know anything I can do?
Running 10.6.8 and Mail ver 4.6
Please help!

Thanks!
Seemed the answer was to disenable each account in Preferences, then click Enable This Account back to on. Each one in turn came back on line. Also found the problem in another computer in the office and it worked to bring that one back also.
Much appreciated.

Similar Messages

  • All account have all gone off line and won't come back.

    my aol, g-mail, and moblie me accounts have all gone off line and won't come back. It started with AOL the spining wheel first and then the triange. I can get the mail with safari with no problem. any ideas?

    From the Mac Mail menu bar click Mailbox > Take All Accounts Online

  • OfficeJet 6500A Plus Goes Offline and Won't Come Back

    I'm having  trouble with my OfficeJet 6500A Plus, keeping it "online" to the wireless network in my home.  I am trying to print from my HP Pavilion laptop which has been loaded with the latest software from the HP Support site.
    The printer shows itself to be online to my router.  I've even run the Wireless Setup Wizard over again to reintroduce the printer to the router.  But, no, my laptop considers the printer to be "offline" and, if I try to remove and reinstall the printer, Windows can't find the printer on the network.
    By the way, my Pavilion laptop is new, purchased in July and it's running on Windows 8.1.
    Any help will be greatly appreciated.
    Thanks,
    Denny LaBarge

    Hello there Denny, aka @labargephoto 
    I understand your printer is not being found when you try do install it on your network. Check out the steps in the guide below and follow them thoroughly and they should help the installation problem.
    'Unable to Find the Printer' Message Displays on the Computer During a Network Installation
    Have a great day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • My Iphone just shut off, it was not low in battery at all but its off and won't come back on

    How do I turn back my iphone? It just shut off with no reaseon, I had a full battery.

    Try holding the home button on the front and the power button on the top until you see an Apple logo.

  • My Phone Just Shuts Off and won't come back on unless hooked to a power source.  I've got all the updates and all apps are closed out.

    My Phone Just Shuts Off and won't come back on unless hooked to a power source.  I've got all the updates and all apps are closed out.

    Most likely a bad battery.

  • After upgrading to mavericks my mac shut off and won't come back on

    I upgraded to Mavericks and my 2013 macbook pro shut off and won't come back on.  When I push the start button I can hear the chime and then my sleep light blinks really fast and then shuts off completely.  All I get is a white screen with the loading circle just going around and around.  I tried resetting the pram but that didn't work.  Any ideas?

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • 15-r018dx display turns off and won't come back on

    I have a HP 15-R018DX laptop that I just bought and when I close the display, it turns the display off and won't come back on when I flip it open again.  I've already changed the Power Options so that the "what happens when you close the display" options are all set to "nothing happens".  Despite that, each time I close the display and open it again, the display goes blank and stays blank, though the status LEDs on the left side tell me that the compuer is still on and not hibernated, etc.
    The only way to return the display to normal is to push the power button (I have it set to hibernate when I push the power button) and then turn it back on again after it hibernates.  Then, the display is illuminated again like normal.  No amount of touching the touchpad, it's buttons, or keyboard keys will return the display to normal once it turns off after the lid is closed and re-opened.  Any ideas on what's happening and how to make the display turn on when opening the display again? Thanks in advance!

    I was also facing the same probs..
    bt when i reinstalled OS, nw alomost every part s ok except the brightness part..
    The option to adjust brightness seems unavailable..

  • HT1339 After I disconnect from my PC, my iPod nano shuts off and won't come back on?  How do I fix this?

    When I disconnect from my PC, my nano shuts off and won't come back on.  I have tried holding down both the On/Off and the Home buttons -- but nothing...

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My ipad went dark during a game and won't come back on even when hooked to macbook or charger, what do I try?

    My Ipad went dark while playing a game and won't come back up even when hooked to macbook pro or the charger, what do I do?

    try to restart/reset the iPad by pressing and holding both the Power/Sleep button (top edge) and Home Button for about 10 seconds until the apple logo is displayed.

  • Whilst using my laptop it powered off unexpectedly and won't come back on. Ive tried connecting it to the powere adaptor but it's not charging Nd is still off. Battery was fully charged before it went off

    Whilst using my laptop it powered off unexpectedly and won't come back on. Ive tried connecting it to the powere adaptor but it's not charging Nd is still off. Battery was fully charged before it went off. Please what can I do?

    Try resetting the  SMC http://support.apple.com/kb/ht3964
    Try resetting NVRAM/PRAM http://support.apple.com/kb/ht1379

  • Why does my iphone 3gs screen goes black after reaching another party and won't come back on to press end the call

    why does my iphone 3gs screen goes black after reaching another party and won't come back on to end the call

    hi smalley3,
    Welcome to the Forums.
    The flickering issue maybe due to a bad LCD cable or in some cases, a faulty GPU (the GPU is integrated to the CPU, and the CPU is soldered to the motherboard).
    If there's still no image on the screen even after connecting an external display then you likely have a bad GPU.
    In this case, I recommend you contact support for service (and also to see if there's a consideration that can be done on the warranty repair).
    Support phone list
    Regards
     

  • Screen goes to sleep and won't come back on - how to fix?

    My 2009 MacBook screen goes to sleep and won't come back on. It just stays black while the computer is still running. This just started happening one day for no apparent reason. Anyway to reconcile?

    When you post for help, please state which OS X is installed.
    If you aren't sure, click About this Mac from your Apple menu 
    Troubleshooting advice can depend on that information.

  • My iPhone 4s randomly shut off last night and won't come back on. what do i do?

    My iPhone 4s randomly turned off last night and it won't come back on.  It shut off with plenty of battery life last night, but just in case, I've had it plugged into the charger all night. Still nothing has happened. Any advice?

    hold down the home/sleep button together until you see the apple logo and then release.

  • I was updating my phone and it turned off and won't come back on

    I was trying to update my iphone 5s yesterday and it shut off and now it won't come back on. I've had it plugged in all night and have tried holding the home and sleep button but nothing works

    Try holding the home and sleep buttons for as long as a minute.  Try it a few times.
    Are you sure it's plugged into a good outlet using a good charger and cable?
    Else, take it in to Apple and let them look at it... you have a 1 year warranty.

  • MacBook Pro 2012. Replaced hard drive yesterday by apple. Went home working and now it turns off and won't come back on till I plug it in... Help!

    Have had a ton of issues with my Mac. Went to the apple store in march and they said my processor could be going bad and they basically did nothing. Yesterday I was using my computer put it to sleep. 10 minutes later I opened it up and it completely crashed. Drove 2 hours to get to apple because I am away at school and need my computer for finals. They replaced my hard drive and it was working perfectly fine till today. Now it turns on and works and then shuts off and it won't come back on till I plug it in. It's completely charged and I need it for my classes. I have apple care but I can't keep driving back to apple every day. I have a apple appointment tomorrow but this is ridiculous. Has anyone had any of these issues? What's it going to take for them to replace my computer I can't even live a day without it right now. And by the way. I could not even get any of my data off my old hard drive. So basically nothing is on this computer right now.

    Kak4k8 wrote:
    I have apple care but I can't keep driving back to apple every day. I have a apple appointment tomorrow but this is ridiculous. What's it going to take for them to replace my computer I can't even live a day without it right now.
    Let them know how this is inconveniencing you.  For a replacement, I believe Apples general rule of thumb is if it comes in for the 3rd time for the same issue they will replace it, but it may vary by store.  It cant hurt to ask for a replacement.

Maybe you are looking for

  • Getting values from a stored procedure with no parameters

    Hi, I'm trying to get values out of a stored procedure that I created on SQL server. I'm trying to get XML values out of the database, but I'm not sure how to get any data out of it written to a file if the procedure doesn't have any parameters. So I

  • Phone locked up and other issues

    I was having issues with my phone last night. Sync was a problem and I received several messages that sync for calendar and contacts could not be continued because phone was disconnected! Phone was not disconnected nor was the computer in sleep mode.

  • Not able to display document at sost transaction

    I am sending a mail by using the function module SO_NEW_DOCUMENT_ATT_SEND_API1. Initially I was able to see the document at SOST transaction. But now I am not able to display the document even though I had not done any changes in the program.

  • Firefox is taking along time to get started after opening home page

    after opening firefox it takes a few minutes before I can browse any site or feature. Everything is frozen on the home page for awhile.

  • Cin pricing procedures

    what r the major differences between TAXINJ and TAXINN. which would be very useful in present scenario. and advisable, will reward