All mail accounts suddenly stopped working on iPad2. Have tried deleting accounts and re installing, but still no luck. Any solutions?
Unable to find any of the mail servers for pop, gmail and me. However can access all accounts directly through web without issue.
Hi there Smyth2013,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
-Griff W.
Similar Messages
-
Edit In Photoshop from lighroom suddenly stopped working. I have tried uninstalling and reinstalling both and still not working.
What error message are you getting? If none then in Lightroom Preferences> General> check "reset all warning dialogs"
Try again and see what message pops up. -
i have read up on all about crashes and i cant even open it in safe mode :( i have tried deleting it and reinstalling it but the problem still persists. What would you suggest i do and is there any way i canget hold of firefox 6 for mac?
Does the regular Firefox 8 release version work or does the version crash as well?
*Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
TS1717 Itunes stops working. I have tried uninstalling, quicktime and more, nothing works. HELP!
itunes stops working, cannot play video. I have tried uninstalling, quicktime and more to no avail. HELP!
Try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
It just happened suddenly may be after updating to ff 7.
I have tried Safe Mode.
I have tried installing older version of FF.
I never had Grease Monkey or Tab mix plus.What type of mouse? Or is that a laptop touchpad issue?<br />
Does it use the Windows mouse driver, or did you install a mouse driver program? <br />''If it is more than a 2-button mouse with a scroll wheel, it probably needed to have its' own software installed.'' -
So I am trying to connect my ipod to my itunes So I can transfer music from CDS I have on to my ipod...The ipod says it's connected to the computer,But itunes and my conputer do not register my ipod is connected...I have trierd to update and reintalinng it and still not working...Anyone wanna help me please
tmplHi pranoop,
If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article -
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
I've had my Iphone4 since 2011 but the current operating system is still 4.2.1. I'd gone quite a while between buying things on itunes directly to my phone and synching it to my pc. When I eventually synched it, it told me that I needed to upgrade to a newer version of Itunes. When I try and click on it to get new version my pc will not do anything. The only thing I can think of doing is to uninstall the old itunes and re-install the current one but i'm guessing i will lose all my purchases. Is this the only way to go about this, any help would be gratefully appreciated - thanks mark (chunky74)
uninstalling iTunes and it's additional components does absolutely nothing to the music/apps/etc that you have downloaded or purchased.
before uninstalling iTunes, try going to the itunes website, download the install file there and manually install it.
If you do have to uninstall iTunes, please make sure you're following this article to make sure that you're uninstalling all of the components correctly and in the right order. Uninstalling iTunes, but not doing it the 'right' way is essentially a waste of time -
Where's my water suddenly stopped working. We have both the free and paid version installed and the free one works. The paid version fails during initilazation. Bothe have been updated from Itunes and the IPAD was rebooted. My wife playes it every day and yesterday it failed to run, any suggestions?
Are they apps?
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod/iPad
BTW this is the iPod touch forum -
My headphones don't work. I have tried other ones and still not working
My headphones stopped working. I have tried other headphones and tried resetting ipod to no avail. Any ideas?
Does it still work in iPod docks or other adapters where it plugs into the bottom? That is what happened to mine and there was nothing they could do to fix it. I had a friend who said that he found a kit online to do it yourself, but that's risky. If it's still under warrenty, just take it in to an apple store and they should replace it. I was given the option to trade mine in for a brand new identical one for half price because I was past warrenty. They no longer made the 80g that I had anymore, so I ended up getting a 120g for the same price. I was prettty happy.
-
My Yahoo mail account has suddenly stopped working. Have deleted and re installed but still not working. Recently updated iOS could this be related?
Try resetting the Yahoo password. Yahoo not infrequently has problems.
-
My camera all of the sudden stopped working. What is going on?
My camera all of the sudden stopped working. What is going on?
if by camera you are referring to iSight, here is how to troubleshoot:
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
Standalone iSight cameras
The instructions in this section apply if you have an iSight camera that is not built into your computer but attaches to the computer via a FireWire cable.
Make sure the cable is completely plugged in.
Incomplete cable connections are the most common cause of hardware problems. Follow these quick instructions to make sure your iSight cable is completely plugged in.If your iSight camera continues to function improperly, continue on to the steps below.
Turn the computer and the camera off.
Unplug the FireWire cable from your computer and the camera.
Wait a few seconds.
Firmly, without forcing, plug the cable back in to the camera and the computer.
Caution: FireWire ports are keyed so the FireWire cable can only be inserted one way. Make sure you are inserting the FireWire cable into the FireWire port in the correct orientation.
Restart your computer.
If the green light on top of the iSight is not lit, turn on the camera by gently twisting the lens.
Launch iChat AV.
See if a different FireWire port works.
Some Macs have more than one FireWire port. If your computer has another FireWire port, disconnect the iSight camera from the current port and plug it into the other one. Restart your computer and test the camera before continuing to step three.
Check to see if other FireWire devices work.
If you have another FireWire device, such as a video camera or an external hard drive, try plugging it into your computer to see if it works. If your other FireWire devices work, this means that your computer's FireWire port is working correctly. If your other FireWire devices don't work, there may be an issue with your computer. Contact an Apple Authorized Service Provider for assistance.
Determine if there is an incompatibility with another FireWire device.
If more than one FireWire device is connected to your computer, there may be an incompatibility between two of the devices. To rule this out, disconnect all other FireWire devices from the computer, including external hard drives, CD/DVD drives, other cameras, and FireWire-based networking equipment, such as hubs and repeaters. If your iSight camera works normally when you remove other FireWire devices, plug them back in one at a time to isolate the cause of the issue.
Make sure the FireWire cable is good.
Follow these steps to test the FireWire cable:Information about your iSight camera should appear in the FireWire Information field. If you see the iSight camera in this field, your cable is good. Once you've confirmed the cable you are using is good, use it to plug your iSight into your computer. If the green light on the top of the camera does not light up immediately (within a second), there may be an issue with your camera. Fill out an iSight Service Request to have your camera repaired.
Important: Do not send your iSight camera for repair until you have tried each troubleshooting step.If the FireWire cable that came with your iSight camera didn't work, try another FireWire cable that you know works. If this cable works, there is an issue with your iSight's FireWire cable. If your camera is in the limited warranty period, fill out an iSight Service Request to receive a replacement cable.
Choose About This Mac from the Apple menu.
Click More Info. System Profiler opens.
In the System Profiler window, click on the Devices and Volumes option.
Click the disclosure triangle, if necessary, in the FireWire Information area.
Check to see if there is an issue with your camera.
If information about your iSight appears in System Profiler but the camera still does not work, follow these steps:Video from your iSight camera should appear on screen. If the screen is blue or black, there may be an issue with the camera. Fill out an iSight Service Request to have your camera repaired.
Open iChat AV.
Choose Preferences from the iChat menu.
Click the Video button.
Twist the front of the iSight camera lens to open the iris barrier. The green light on the camera turns on when the iris barrier is open. -
My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!
try this.
get back into your router's settings and start deleting devices that are not connected to your router.
you can also delete the ones that are connected - they'll connect again.
on the DHCP side of it, increase the amount of users that can connect/log in to your router.
see if that sorts it out for you.
good luck. -
My imovie all of a sudden stopped working when I was in the middle of making a project and then all of a sudden when I tried to click on something my computer just beeped at me. I cant even exit out of the program! Or shut down my computer unless I quit imovie. Help?!?!
What version of OS X and iMovie are you using?
-
Wifi has all of a sudden stopped working Iphone4
The other day i was browsing the net and my wifi all of a sudden stopped working.
I went to turn it back on but it just kept loading.
Sometimes when the wifi does turn on its for 5 seconds and turns off again.
Ive tried "reset network settings" and "reset all settings" turning it off and everything. Forgeting it then trying again.
But it still wont work.If no change after resetting network settings on the iPhone, try restoring the iPhone with iTunes as a new iPhone or not from the backup.
If no change after that, the iPhone has a hardware problem. -
Lenovo T61p-6457 has all of a sudden stopped working!
My Lenovo T61p-6457 has all of a sudden stopped working.
When I power it up I see the that power and HDD green lights go on and from another computer on my network I can access individual files on the T61p hdd.
However when I connect the T61p via VGA cable to an external working monitor I don't see Windows or any images on the external screen!
Do you think that there is only a problem with the screen or could there be something else?
The currently installed screen on the T61p 6457 is WSXGA 1680x1050 (Samsung LTN154P2-LO5).
I have found a working WUXGA 1920 x 1200 along with inverter and cable in the original Lenovo T61p top case housing - will this work in my T61p?
Solved!
Go to Solution.Good day.
When you boot your machine, are you getting any beeps? If so, please post back with the sequence (# of long and short).
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.
Maybe you are looking for
-
'Permissions' issues trying to restore
Trying to restore a directory - TM fails with the message 'You don't have permission to access <x>' It constructs the folders and the sub-folders. Just no files... Is there a resource on this?
-
Any suggestions on how to create a second apple password and split up the apple products so not all the information is sync to all 6 products?
-
Us Planning Function to Update BPS Variable
I have read through several 'How To' papers on variables, but did not come across this. Is it possible to develop a planning function (FOX or User Exit) to prgramatically read and then update a BPS variable?
-
Filtering using equality operator
I have the folloiwng MDX query: SELECT NON EMPTY { [Measures].[Gross Premium] } ON COLUMNS, NON EMPTY { ([Date].[Quarter].[Quarter].ALLMEMBERS * [Prospect Client].[Account Number].[Account Number].ALLMEMBERS * [Broker].[Account Direct Broker Cod
-
How to verify multiple paths available to a route in OSPF
Hello, How do I verify multiple paths available to a route in OSPF I have three paths available to a route. I can see two equal cost paths shown in the routing table. The third higher metric path doesn't show up in the routing table When I disable th