All messages set to same time on upgrade

Over the weekend we upgraded to Tiger server. Most of the time was dedicated to the awful process of moving mail from our panther server. After trying out a variety of tricks and tweaks posted here and elsewhere all our mail made it-- however, most if not all of our IMAP messages now display in Mail as being received at the same time, 12pm, for each date. In other words, all of the mail received August 20th shows as being received at 12pm. The header info of individual messages seems fine-- when actually viewing the messages the time is correct.
I have tried repairing the database with both server admin and mailbfr, but it doesn't seem to make a difference. I also tried rebuilding the individual mailboxes from the client side. Anyone heard of this and/or have any suggestions? Thanks

Hey, thanks. That did the trick. That doesn't explain why the times are all messed up, but it does show the correct time in date sent. I have always browsed by date received, not date sent so I didn't even think of that. On newer mail, mail received since the migration, the date sent and received columns are identical.

Similar Messages

Bulk load users into Directory and Messaging at the same time

Can I bulk load users into Directory and Messaging at the same
time?
<P>
Yes, but you are not really loading users into the Messaging
Server. The Directory Server contains all kinds of information about
users, including information about their email. So if you want to
load user information into the Directory Server, including the users'
messaging infromation, you must install the Directory server first.
Configure the directory server. Then install the Messaging Server.
Then you can load users into both by loading an LDIF file with the
user information.

Hi,
You can check the documentation: Multiple Copies of RMAN Backups ;-)
When backing up datafiles, archived redo log files, server parameter files and control files into backup pieces, RMAN can duplex the backup set, producing up to four identical copies of each backup piece in the backup set on different backup destinations with one BACKUP command. (Note that duplexing is not supported for backup operations that produce image copies.)
There are three ways to specify duplexing of backup sets when using the BACKUP command:
Specify a default level of duplexing with CONFIGURE... BACKUP COPIESAll backup commands that back up data into backup sets will be affected if you use this option, unless you specify different duplexing options for a command using SET BACKUP COPIES or provide a COPIES option for the BACKUP command.
Use SET BACKUP COPIES in a RUN block All commands in the RUN block will be affected, overriding any CONFIGURE... BACKUPCOPIES setting, except those where you provide a COPIES option as part of the BACKUP command.
Provide a COPIES option to the BACKUP command For this specific BACKUP command, files will be duplexed to produce the number of copies you specify.
Cheers
Legatti

My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie

Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions. I downloaded the most recent driver! Any help would be appreciated.

Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions. I downloaded the most recent driver! Any help would be appreciated.

HP says that the drivers for your all in one print/scanner are downloadable from apple. For the scanner to use preview. image capture or the scan icon from the print driver queue. I don't know how old your HP is, but I know that the newer Os from apple don't support a lot of older printers. You might be able find a third party driver that could work.

HT3529 How to delete multiple messages at the same time?

I'm new with and IPhone I try to delete multiple messages at the same time. and I can't find how to do this.

Email messages? Tap the edit button...tap each message you want to delete...hit delete...once in trash, tap edit, then tap delete all.

On I-Mac, how can I close all tabs at the same time?

On I-Mac, how can I close all tabs at the same time?
I use Mozilla Firefox for internet.

Not an Apple product, have you visited:
https://support.mozilla.org/en-US/kb/keyboard-shortcuts-perform-firefox-tasks-qu ickly

How to change drill filter values of all reports at the same time

Hi,
The Webintelligence users in our environment usuallly use drill filters in their document's reports. We'd like to find a way to change the drill filters' values of all reports when one value is selected. I mean, we need a work around to change the drill filters of all reports at the same time.
We are using Business Objects XI 3.1 (a lot of webintelligence documents available, over than 2500).
Does someone know a way to do that? I've already looked for that a lot, but I couldn't find anything.
Thanks in advance,
Gustavo Borges

Hello Gustavo,
as you refer to a Webi problem I recommend to post this query to the [BusinessObjects Web Intelligence|SAP BusinessObjects Web Intelligence; forum.
This forum is dedicated to topics related to the creation and design of Web Intelligence documents using the Web Intelligence Report Panels. This includes areas such as universe connectivity, prompts, charting, formatting, filters, and formulas.
It is monitored by qualified technicians and you will get a faster response there.
Also, all Webi queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

IPVC-3511-MCU - Can't see all persions at the same time on conference

Hello,
I can't see all persion at the same time on conference. I also can't see seperate screen on LCD pannel or CVTA on PC.
Does IPVC-3511-MCU support multiple conference with multiple video screen?
Regards,
John.

Hi -
This feature is called continuous presence - there are a number of references on Cisco's web site for the 3511. Here is one - http://www.cisco.com/en/US/customer/products/hw/video/ps1870/products_administration_guide_chapter09186a00804fc993.html and possibly another - http://www.cisco.com/en/US/customer/products/hw/video/ps1870/products_data_sheet0900aecd801c5e66.html
You did not mention the release of the 3511 software you are running. Knowing that might help too.
Ginger

Process file after file / not all files at the same time

Hi There,
i have a new Problem with our XI Systems.
We process XML Files.. they come in a folder on the Server.. from there the Engine takes it and processes the message.
This works so:
In the folder /xyz/ comes a XML File... File1.xml
After 2 Minutes the XI System takes the messages and proccess it. The Engine then move the file to Folder /archive/
Another two minutes later a new file comes in to the Folder /xyz/ File2.xml
File2.xml change now data that comed with File1.xml
and two minutes later the Engine processes the message
and so on and on....
My problem is now.. when i put File1.xml and File2.xml in the Folder /xyz/ at the same time.. the Engine processes the Messages at the same time.. and inconsistencys comes into my system.
So what i want is:
I Put File1.xml and File2.xml into the same folder.. then the Engine comes and Process first File1.xml and when this finished the System proccesses File2.xml
Do you know what i mean?
Eventually someone has a solution for my question?
Thanks
Bjoern

OK. I found now in the INtegration Builder the Point as you can see in the Screenhot here:
http://img253.imageshack.us/my.php?image=58047457ux6.jpg
But my Problem is that i dont know exactly which queue i have to take..
In SXMB_ADM i found the following queues:
http://img253.imageshack.us/my.php?image=57846606uq4.jpg
And in the SXMB_MONI i see the following for messages:
http://img111.imageshack.us/my.php?image=47303569tg7.jpg
From the screenshots above, can you tell me which queue i have to take?
Or did i have to take the Queue that comes automatically when i choose EOIO?!
Thanks
Bjoern
Edited by: bjoern bayerschmidt on Dec 18, 2008 2:17 PM

HT204389 How do I delete my email messages and also delete my laptop messages at the same time, as I used to do with my Blackberry?

How do I delete my email messages along with my laptop messages at the same time, as I used to do with my Blackberry?

You need to configure the mail client to use IMAP instead of POP3 protocol.

Upadting all articles at the same time?

is there a way of upadting all articles at the same time? I have like 64 articles in one folio and I dont see a way of updating them in the folio builder all at once, I have to click on every article and choose update in the Folio Builder, then wait, then click on another, update and wait....

That will definitely be a relief
BTW, when I import several articles, I sometimes lose the links to internal pages inside articles ("go to page 3"). Is that a known issue?
Updating articles is the cure, but it's a pain when I have to do that 25 times...

How to display all validator messages at the same time?

Hi Guys,
I have a form with validators attached to a couple of my input boxes. I tried to write validators which are reusable in other parts of my app ie. social security number check etc. I also then customized the messages and it all works fine.
But when I submit the form it displays the messages one at a time, in other words every validator is performed and if there was an error the form is rendered. I believe this is how it should behave and that's fine.
But what if I want all validators to be performed when I submit the form?Then all messages are displayed at the top of the page and the user can make all his changes and try again. This makes more sense to me.
So my question is whether there is a way to force the page to perform all validators when the page is submitted and then display all error messages in a h:messages tag?
Cheers and thanks alot
p.s. i know about and use the hidden input field validator hack which does all validations, but if I do it that way I duplicate the code which does the social security check for all applicable forms.

Strange, I was under the impression that all validators were run by default. In my JSF apps, all the validators run and output their errors without any special confguration to make this happen.
I wonder why yours are just running one at a time? Could you show some of your JSP code, and the hidden field validator code?
CowKing

Close all open windows at same time

Is there any way to close all open programs at once, rather than having to do them one at a time?

I don't know of a way to close all open apps at the same time, but i do know of a way to close all open windows in a particular app at one time, ie: safari
Hold down Option when you click on the red close button at the top of one of those windows, and it will close all windows *for that app*...but doing so doesn't necessarily quit the app.
The only other thing i can think of you can do is hold down Command, Option, and Esc to get the Force Quit window to open, (or access it from the Apple menu at the top left corner) and then you can select one at a time all the apps and force quit them individually...it's still quicker than switching between each app individually..
Message was edited by: tool
Message was edited by: tool

IPhones and iPods ALL drop wireless at same time-but not iPad??

In my family, we have mutliple Apple devices online at the same time.
iPhone 3s
iPhone 4s
two iPods
iPad 2
I also have two work laptops and a personal laptop, all running Windows 7. Plus, I also have an XBOX 360 on a Linksys wireless gaming router (older one...can't run WPA2 security, only WPA)
They are connected to internet with Netgear WNR2000 wireless router, running WPA security, up to 54 GB/s (I believe on 2.4 GHz).
HERE'S MY ISSUE:
About once every day or two, all of my iPhones and iPods will drop off of the wireless network - at the SAME TIME. However, every other device in my house is running perfectly smoothly on the network. Including the iPad 2, which never has any network issues. The "fix" is, going over to the router and cycling it off and on again. But that is not a real fix.
The dropping is kind of random, sometimes in the morning, sometimes in the evening. But usually after several hours after a recycle.
I have tried all kinds of router channels,1 -11, I have tried WEP and both kinds of WPA security (AES and TKIP). I cannot do WPA2 because of my older Linksys access point.
The problem started happening when I added security to the router. But I do not want to have the router without security any longer, so removing it is not an option.
Does anyone have any idea why all of my iPhones and iPods would drop the wireless network at the exact same time, however, my iPad 2 and every other device in my household NEVER drops?
I have already tried renaming the network, and that doesn't help, and I have tried moving the channel around - no better. I am trying reserved IP addressing for my i-devices...but am not optimistic. (I read about trying this somewhere...)
Please help! If someone could at least help explain what is common between my iPhones and iPods but not common with the iPad it might help me figure this out.

@wjosten
I agree that network interference can cause problems. I have surveyed the other close networks and tried multiple channels, same result.
But if it were bad channels, I don't know how that would explain why only the same set of iDevices would all be thrown off network at same time (and it's always the same ones), while my other devices all work fine.
My router is only single channel, so everything is on the 2.4ghz band.

[Fixed?] Cannot use mouse and touchpad at the same time after upgrade

Dell Inspiron 6400 laptop, Synaptics touchpad, external wireless USB mouse (Logitech).
Yesterday I did a full system upgrade which among other packages upgraded
[2007-11-08 00:06] upgraded synaptics (0.14.6-2 -> 0.14.6.99-1)
[2007-11-08 00:06] upgraded tzdata (2007h-1 -> 2007i-1)
[2007-11-08 00:06] upgraded xf86-input-keyboard (1.1.1-1 -> 1.2.2-2)
[2007-11-08 00:06] upgraded xf86-input-mouse (1.2.1-1 -> 1.2.3-1)
[2007-11-08 00:06] upgraded xf86-video-i810 (1.7.4-2 -> 1.7.4-6)
[2007-11-08 00:06] upgraded xf86-video-vesa (1.3.0-1 -> 1.3.0-5)
[2007-11-08 00:06] upgraded xorg-server (1.2.0-5 -> 1.4-4)
Before the upgrade, I was able to use both the touchpad and the mouse at the same time, using the following xorg.conf settings:
Section "ServerLayout"
InputDevice "Touchpad" "CorePointer"
InputDevice "USB Mouse" "AlwaysCore"
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
EndSection
After the upgrade, the touchpad was still working with these settings but the mouse wasn't. I then changed the xorg.conf settings as follows:
Section "ServerLayout"
InputDevice "USB Mouse" "CorePointer"
InputDevice "Touchpad" "AlwaysCore"
with the InputDevice sections remaining the same for USB Mouse and Touchpad. After this change the mouse was working but the touchpad wasn't. Finally, I changed the xorg.conf settings as follows:
Section "ServerLayout"
InputDevice "Touchpad" "CorePointer"
InputDevice "USBMouse" "SendCoreEvents"
with the InputDevice sections remaining the same for USB Mouse and Touchpad. This didn't change anything from the last setting: the mouse was working but the touchpad wasn't.
How can I restore the ability to simultaneously use mouse and touchpad?
Last edited by RobF (2007-11-09 20:20:54)

Try this:
Move "SendCoreEvents" to the Touchpad line (replacing the "AlwaysCore" bit) and then comment out the USB mouse. So in the end, it'll look like this:
Section "ServerLayout"
InputDevice "Touchpad" "SendCoreEvents"
# InputDevice "USBMouse"
EndSection
Restart X and see if everything is working right.
PS: You may also want to consider changing the Touchpad device line to "/dev/input/mouse2" instead of "/dev/psaux" as I believe psaux has been deprecated in kernel 2.6. I could be wrong, but I can tell you that /dev/input/mouse2 works great with the touchpad on my Dell e1505.

All messages set to same time on upgrade

Similar Messages

Maybe you are looking for