ALL my ad-ons just stopped working one day, but they work fine on my other computer...
I didnt do any specific update, and I dont even have many ad-ons, the only ones i really use are ad-block plus and download statusbar... i've tried uninstalling and reinstalling the ad-ons, and firefox as a whole. but that didnt change anything. on my other laptop i have the same settings and versions and everything and its working fine.
You may have some corrupt files, see [[unable to install add-ons#Corrupt extension files|corrupt extension files]] for details of the files to remove. If one of those files is corrupt it can cause problems such as add-ons not working.
Similar Messages
-
Headphone jack broken ? no sound in one earphone, but they're fine
My earphones are fine, but as i play music through them from my ipod i only get sound through one earphone
i also get only one part of the song, either lead or background music
any help/suggestions will be greatly appreciated, i'm really frustrated
Message was edited by: Rickersit could be just a bad contact
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/ -
Hi, i bought my IPod 4G about 7 months ago. After about a mont of buying them, one the earphones just stopped working which became extremely annoying..so i bought a new set of earphones and they worked well for about 5/6 months and then one of them stopped working as well. About 2 weeks ago, i bought a new set of earphones and now the right earphone of that has stopped working as well. The thing is, the earphone doesnt just stop working on my IPod, it also stops working on my laptop...and now i am very confused as to where the problem lies. I can't keep buying headphones every other week cos that is just too expensive and i dont know if the problem lies with my IPod or what! The same thing is happening to my sister's IPod as they were purchased at the same time. What do we do??
This previous discussion discusses the same if not similar problem.
https://discussions.apple.com/message/6750990#6750990 -
my ipod classic got wet back in August.. it seemed to work fine for about a month, but recently is not working at all..screen appeared to get cloudy and then it just stopped working. thanks.
Most likely, water damage.
You can try putting your iPod in a tupperware, half filled (maybe half inch) with rice grains, close the cover for about a week.
If you have done this, as soon as it got wet, higher chances of success, now looks like the water moisture is getting to the LCD screen.
Then you can always bring it to Apple Genius bar, for a an overhaul. (may cost you half the price of a new iPod classic.) -
2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light
The power supply is shot. But that it lasted even this long is the wonder.. not that it died.
The TC runs too hot..
Look on ebay for "Time Capsule power supply"
You can get a replacement and fix it although the economics are not so good.. it is probably time for a new TC.
If you can DIY it is really only a few dollars worth of capacitors that go bad.
See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
For a bunch of alternatives. -
Hi, all of my adobe has just stopped working.. CS5, and adobe acrobat 10
hi, all of my adobe has just stopped working.. CS5, and adobe acrobat 10
also, these were bought on line with no disc (god knows why)
how can I access these from adobe.comHi Dave ,
Could you please elaborate a bit more about the issue ,what exactly has happened?
Are you not able to launch and PDF' or getting some error message ?
You can log in to Adobe.com with your credentials .If you do not have any prior credentials ,you need to create an account .Adobe.com will either let you purchase the product or opt for a trial version.
Please go ahead if that matches your requirement.
Regards
Sukrit Dhingra -
WRT54G - wireless just stopped working on all devices
Hi All,
I've had my WRT54G for a couple of years and have my Desktop hard wired (to the router) and 2 laptops and an ipod connecting wirelessly succefully for the past 2 years.Woke up this morning and nothing will connect wirelessly,finding the router is intermitent and when it does it cannot establish a connection with it. I can connect the devices via the network cable directly to the router and all works fine, it's just wireless that has suddenly stopped working.
I have tried 'turning it off and on again" turning WEP off, changing WEP password etc. but nothing seems to work. Im at a loss as to why my entire wireless network/connection has just stopped working?
Any ideas?
Message Edited by coldfuel on 02-06-2009 07:36 AM
Solved!
Go to Solution.I'm having a similar problem. This past month or so, the router just kicks my wireless computers off the network. Then I can't find the network at all. My work around has been to go into the wireless setting (via my hard-wired computer) and change the wireless channel from 9 to 11 or vice versa. This keeps the network connected for a day or two and then kicks us off again until I change the channel.
I've looked into the solution previously posted of upgrading the Firmware but I'm having a difficult time doing so. I'm on a Mac and the firmware downloads seem to be for PC. The other problem I'm having is that my model is WRT54GS (no version number). Should I assume this is version 1.0? I think so. Anyway, like I said, when I download the firmware for that unit, it shows up as a bin file (WRT54GSv3_4.71.4.001_fw,3.bin). I then expand it and it becomes a cpgz file (WRT54GSv3_4.71.4.001_fw,3.bin.cpgz). And back and forth, over and over again.
How can I upgrade my firmware on my Mac?
PS> Current Firmware Version: v2.07.1
Message Edited by Enyko on 08-19-2009 07:05 AM -
My Ipod wont play all of my songs they just stopped working. Can anybody help?
My ipod will not play all of my songs, they just stopped working, can anybody help me?
Do they play in iTunes n the computer?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My imessage has just stopped working with one of my contacts, on both of our phones imessage still works with other contacts. Why can we imessage others but not each other?
Yes... to no avail
-
Hello everyone my iPhone 5s sounds stop working.i did not do anything it just stop working when I tried to turn on my music player all the sounds is not working I already check the volume and it is not also muted :( what happened can anyone solve my problem please
Hey Kirby17,
Thanks for using Apple Support Communities.
If you are not getting any sound from the speaker, follow this article.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
Have a nice day,
Mario -
when do IOS5 come out? My headphones broke so is there a way i can get yall to send me new ones. mine just stopped working.
Ios 5 comes out Wednesday.
We are iphone users just like you. We can send you nothing.
The headphones are covered by the same warranty as the iphone. You could contact Apple and get them replaced, if they are defective. -
I'm using iPhone 5
Why am I facing so many problem after upgrading to ios7, my phone hangs/stuck many times, applications just stop working and close themselves, battery drainage,Facebook and all applications don't work properly. What should I do? They punished me for upgrading to ios7. I now hate apple and I'm thing of getting samsung.Basic troubleshooting
Reset
Restore with backup
Restore as new ( better ) -
Ok one day out of the blue my ipod just stopped working it wouldnt turn on nothing but after recovering it, it's fine now but there is only one problem my screen wont work i can't do anything on it not even unlock it please someone help!!!!
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order -
my Ipod touch 4th generation facetime has just stopped working it will ring out and then try to connect and each time says connection lost. The Ipod has been reset hardware etc and the software is all update .
Hi hema87,
Thanks for using Apple Support Communities. This article has some troubleshooting steps you can try if FaceTime is timing out:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
Cheers,
- Ari -
i forgot my pass code my home button doesnt work i cant restore because find my phone is on im frustrated and out of solutions my home button just stopped working today and it has just been one issue after another this morning help help help
If you are unable to restore your iPhone with iTunes without having to enter the passcode, you will not be able to update your iPhone's backup. You will need to place the iPhone into recovery mode in order to restore the iPhone with iTunes and you can restore from the most recent backup available.
http://support.apple.com/kb/ht1808
Maybe you are looking for
-
Segmentation fault while updateing [SOLVED]
Hello all, I got this probem a few days ago, trying to run 'pacman -syu' ends in a segmentation fault. I have no clue what to do abou it.. I first tryed to update zlib manual as it was last in the list, worked fine. So i tryed wine and trying to upda
-
Achieving precise positioning of conditional dashboard sections
Working with 11.1.1.7.0. I have three dashboard sections that are conditional. All three sections are in the same column. Only one section will be visible at any given time. The sections "turn off" and "turn on" as designed, in response to a dashb
-
APO Process Order and Stock Transport Order
Using APO Process and Stock Transport Orders are generated. Plant A generates the orders so that plant B can make and ship the product back to plant A against the stock transport order using VL10b. I see the stock transport order and process order in
-
How do you create a new account without a credit card?
How do you create an account without a credit card? I do not see None as an option.
-
Registration of a volume-licensed product
I purchased Photoshop CS6 from an online reseller in October -- http://www.technetmicro.com/Adobe-Photoshop-CS6-Extended-Win_p_99.html The vendor told me it was volume-licensed, not a retail product, and that registration would occur automatically