All my brushes are about 20% smaller than the diameter of the circle. What's happened?

Visited Genius Bar. Solution was System Preferences/Accessibility/Display and move cursor size to Normal. A couple months back I evidently saw the option of making the arrow larger and did so and did not discover the problem in Elements until later. Before I visited Genius Bar I discovered same problem with Photoshop CS6 and Pixelmator. I had also uninstalled then reinstalled Elements and knew it wasn't a bug in the software.

Similar Messages

HT5642 Upgraded this morning. All worked fine for about 30min then "no service". Still the same problem and a reset of the device only fixes the problem for 15min. then we are back to no service?? When will apple fix this???

Upgraded this morning. All worked fine for about 30min then "no service". Still the same problem and a reset of the device only fixes the problem for 15min. then we are back to no service?? When will apple fix this???

Tried to reset network settings ...only fixes it for 15min. Did a firmware restore and a clean new phone setup. no settings restore. still have network service after around 60min. still running 6.1. i do get a prompt that i have to update settings to LTE. Have not excepted the settings as yet. Cellular data is still set to 3G....

In CC214 PS Why has adobe removed the "print Size Button" And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?

In CC214 PS Why has adobe removed the "print Size Button" And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?
These two things need to be remedied in their upgrades because It's become such a bother I've had to revert to older versions of PS.

Yea, and it's a pain to get to. What was the rational for removing the print size button? With the magnifying glass tool selected in older versions of Photoshop you would get a button that says "print size" right next to Actual pixels, Fit Screen, Fill Screen. Now I have to go out of my way and dig for it if I want to see the print size. Of all the buttons you could have taken away, why not fill screen? I never use that.
Besides the point I just downloaded the Oct Upgrade for PS and surprise! Nothing has changed and these are two big black eyes on newer versions of Photoshop. The Brush preview window is unchanged in CC but in CC2014 it's basically worthless. If you apply a texture to a brush you can't properly see the scale of the texture, the spacing, scatter, etc...

Every sync gets "You are about to synchronize your calendar for the first time" - Help !!!

I am on a MBP with the Tour and was able to successfully sync iCal and Address Book with BB. But everytime I try to sync, I get the " You are about to synchronize our Calendar data for the first time." with the options to "Replace Device Data", "Merge Data" or Cancel. Has anyone seen this and know how to fix? Replacing data makes it impossible to update Mac with changes on BB.
Please help!

Create a backup of your iCal and your BlackBerry.
Then create a test Calendar event on the BlackBerry, in iCal then test another synchronization once again.
The first time sync prompt usually occurs when it does not detect entries in either the BlackBerry or iCal Calendar.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

I recently downloaded an album and two of the songs on it play until about half way through and then cut out! What is happening and how do i get them back?

I recently downloaded an album and two of the songs on it play until about half way through and then cut out! What is happening and how do i get them back?

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the entries, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

After repairing permissions, in Mac OS X, I ask the utility to verify permissions again and the same problems are shown, as if I had not repaired anything. What's happening?

After repairing permissions, in Mac OS X, I ask the utility to verify permissions again and the same problems are shown, as if I had not repaired anything. What's happening?

What you are seeing are messages. It's ok.. it won't do any good to repeatedly repair permissions. As long as you see Repair Permissions Complete when it's finished, you are good to go.
Also, if you see any messages that say: SUID: That can be ignored.
Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore
Keep in mind, the only time you need to repair permissions is for troubleshooting.

Why is the Log Area size much smaller than the log volume

I have been following up on an Early Watch report that has been generated for our production SCM 5.0 system running liveCache 7.6.02 Build 14. The alert says "The LOG volumes size in your system is too small. Recommendation: Configure LOG Volumes to at least 2 GB". There are two interesting things about this.
1) I have spent the last couple of days reading all the OSS Notes, and MaxDB documentation I could find, and this does not seem to be documented as a recommendation anywhere. Does this seem like a realistic recommendation without taking into account the level of change actifity?
2) There is a single log volume allocated with size 2,097,160 KB. In production LC10 and DBMGUI report this to be correct size under volume details, but only list the total log area size as 1,706,328 (81% of the volume size). We have a non-production environment with exactly the same size log volume, but it reports that the log area size is 2,032,008 KB (97% of the volume). What leads to these different amounts of wasted space, and is there any way of getting the database to start using it?
Thanks,
Mark

Hi Natalia,
I did read 869267, several times. It does not answer my questions which is why I posted here.
DBMGUI version = 7.6.00.25
DBMCLI commands for PL1 (Production)
> xinstinfo PL1
IndepData           : /sapdb/data
IndepPrograms       : /sapdb/programs
InstallationPath    : /sapdb/PL1/db
Kernelversion       : KERNEL    7.6.02   BUILD 014-123-152-175
Rundirectory        : /sapdb/data/wrk/PL1
> dbmcli -d PL1 -u control,control
dbmcli on PL1>db_state
OK
State
ONLINE
dbmcli on PL1>info log
OK
END
Name                            | Value
Log Mirrored                    = NO
Log Writing                     = ON
Log Automatic Overwrite         = OFF
Max. Size (KB)                  = 1706328
Backup Segment Size (KB)        = 699048
Used Size (KB)                  = 104640
Used Size (%)                   = 6
Not Saved (KB)                  = 104640
Not Saved (%)                   = 6
Log Since Last Data Backup (KB) = 0
Savepoints                      = 5210
Checkpoints                     = 0
Physical Reads                  = 2469115
Physical Writes                 = 15655616
Queue Size (KB)                 = 48000
Queue Overflows                 = 646
Group Commits                   = 98205
Waits for Logwriter             = 10957511
Max. Waits                      = 10
Average Waits                   = 0
OMS Log Used Pages              = 0
OMS Min. Free Pages             = 0
dbmcli on PL1>param_getvolsall
OK
LOG_MIRRORED                     NO
MAXLOGVOLUMES                    2
MAXDATAVOLUMES                   14
LOG_VOLUME_NAME_001              262145     F /sapdb/PL1/saplog/DISKL001
DATA_VOLUME_NAME_0001            524289     F /sapdb/PL1/sapdata/DISKD0001
DATA_VOLUME_NAME_0002            524289     F /sapdb/PL1/sapdata/DISKD0002
DATA_VOLUME_NAME_0003            524289     F /sapdb/PL1/sapdata/DISKD0003
DATA_VOLUME_NAME_0004            524289     F /sapdb/PL1/sapdata/DISKD0004
DATA_VOLUME_NAME_0005            524289     F /sapdb/PL1/sapdata/DISKD0005
DATA_VOLUME_NAME_0006            524289     F /sapdb/PL1/sapdata/DISKD0006
DATA_VOLUME_NAME_0007            524289     F /sapdb/PL1/sapdata/DISKD0007
DATA_VOLUME_NAME_0008            524289     F /sapdb/PL1/sapdata/DISKD0008
DATA_VOLUME_NAME_0009            1048577    F /sapdb/PL1/sapdata/DISKD0009
DATA_VOLUME_NAME_0010            1048577    F /sapdb/PL1/sapdata/DISKD0010
DATA_VOLUME_NAME_0011            1048577    F /sapdb/PL1/sapdata/DISKD0011
DATA_VOLUME_NAME_0012            1048577    F /sapdb/PL1/sapdata/DISKD0012
dbmcli on PL1>param_directget MAXCPU
OK
MAXCPU 12
dbmcli on PL1>param_directget MAX_LOG_QUEUE_COUNT
OK
MAX_LOG_QUEUE_COUNT     0
dbmcli on PL1>param_directget LOG_IO_QUEUE
OK
LOG_IO_QUEUE    6000
> xinstinfo SL1
IndepData           : /sapdb/data
IndepPrograms       : /sapdb/programs
InstallationPath    : /sapdb/SL1/db
Kernelversion       : KERNEL    7.6.02   BUILD 014-123-152-175
Rundirectory        : /sapdb/data/wrk/SL1
dbmcli on SL1>db_state
OK
State
ONLINE
dbmcli on SL1>info log
OK
END
Name                            | Value
Log Mirrored                    = NO
Log Writing                     = ON
Log Automatic Overwrite         = OFF
Max. Size (KB)                  = 2032008
Backup Segment Size (KB)        = 699048
Used Size (KB)                  = 3824
Used Size (%)                   = 0
Not Saved (KB)                  = 3824
Not Saved (%)                   = 0
Log Since Last Data Backup (KB) = 0
Savepoints                      = 1256
Checkpoints                     = 0
Physical Reads                  = 2178269
Physical Writes                 = 4969914
Queue Size (KB)                 = 16000
Queue Overflows                 = 21201
Group Commits                   = 643
Waits for Logwriter             = 751336
Max. Waits                      = 4
Average Waits                   = 0
OMS Log Used Pages              = 0
OMS Min. Free Pages             = 0
dbmcli on SL1>param_getvolsall
OK
LOG_MIRRORED                     NO
MAXLOGVOLUMES                    2
MAXDATAVOLUMES                   10
LOG_VOLUME_NAME_001              262145     F /sapdb/SL1/saplog/DISKL001
DATA_VOLUME_NAME_0001            262145     F /sapdb/SL1/sapdata1/DISKD0001
DATA_VOLUME_NAME_0002            262145     F /sapdb/SL1/sapdata2/DISKD0002
DATA_VOLUME_NAME_0003            1048577    F /sapdb/SL1/sapdata3/DISKD0003
DATA_VOLUME_NAME_0004            1048577    F /sapdb/SL1/sapdata4/DISKD0004
DATA_VOLUME_NAME_0005            783501     F /sapdb/SL1/sapdata1/DISKD0005
DATA_VOLUME_NAME_0006            783501     F /sapdb/SL1/sapdata2/DISKD0006
dbmcli on SL1>param_directget MAXCPU
OK
MAXCPU 4
dbmcli on SL1>param_directget MAX_LOG_QUEUE_COUNT
OK
MAX_LOG_QUEUE_COUNT     0
dbmcli on SL1>param_directget LOG_IO_QUEUE
OK
LOG_IO_QUEUE    2000
Thanks for the explaination of the reserved space for the Log Queue pages. This does explain why there is the difference between the two. I think we probably have our log segment size too large. As you can see we do get occasional log queue overflows. Do you suggest we increase the size of our log IO queue higher, and allocate more log volume space to compensate?
select * from SYSINFO.LOGSTATISTICS (on PL1)
1706328;334176;19;334176;19;1879;20305192;64109066;7806480;182151514;12;48000
DBMGUI Log Area Usage
Total Size: 2048.01 MB
Free Log Area: 1330.38 MB
Used Log Area: 335.96 MB
Unsaved Log Area: 335.96
Log since Last Data Backup: 0.00 MB
Thanks,
Mark

Adobe PDF files are printing out smaller than 8 1/2 by 11; only happens on Firefox not IE.

I downloaded the latest free version of Adobe Reader.
Now on Firefox, the page view is surrounded by a black screen. I can increase the view size, and have the document fill the whole page. However, when I go to print, the document prints smaller than an 8 1/2 x 11 page with black space (almost as if I scanned something without a cover) all around it.
Not only is it difficult to read some files, I'm wasting black ink.
I happened to be on another site using Internet Explorer and when I downloaded a file using that browser, everything was normal. No unusual size dimensions, no problems printing.
Seems to be a Firefox issue.
Any suggestions?

You can change the action for Portable Document Format (PDF) from Preview in Firefox to use the Adobe Reader or to Always Ask.
*Tools > Options > Applications
*http://kb.mozillazine.org/File_types_and_download_actions
You can set the pdfjs.disabled pref to true on the <b>about:config</b> page to disable the build-in PDF viewer and use the Adobe Reader instead.
See also:
*https://support.mozilla.org/kb/view-pdf-files-firefox-without-downloading-them

My placed images are coming in smaller than expected.

I'm working on a book that will be printed and would like to make sure I'm getting all my images correct and at the right resolution.
The images I want to place have a dimension of 1280 x 847 and a ppi of 300. I thought this would work fine.
But when I place the image in InDesign the dimensions are about 307x203. I noticed in document presets that the page info has a PPI of 72, so I'm guessing that's what is causing my images to come in smaller. With the images set at the dimensions and ppi that they are though, how can I get them to actually come in at their full dimensions instead of shrinking down? Or is there no way to do this and I need the original photos to be much larger? Obviously I can't take the 307x203 image and scale it up past 100%, so I need to figure out how to get that 1280x847 image in here.
(I'm working with A4 page size in landscape view, and want these images to be full bleed on some of the pages)

Well I was using pixels to describe what the dimensions of the actual photo is, and I know that at 300 ppi in Indesign, when I place the photo the dimensions are then 307x203 by just looking at width and height in either points or pixels. If I try to scale it larger, obviously the effective ppi is lowered, and I don't want that to happen. (So I don't want to change the resolution to 72 in Photoshop either). It sounds like the only way to get the dimensions I need is to have an even larger image? Is there anything else I can do - I mean why would InDesign do this?

Using LR 5 to make slideshow and images in the preview are correct but when I play the actual slideshow the pictures are a lot smaller than what they should be. Help!

I'm making a slideshow with Lightroom 5. I'm using a 2014 Macbook Pro. Everything works except when I play the actual slideshow the pictures are smaller than what they should be. But the preview is showing the correct photo size. Does anyone know why this is happening and how to fix it? Thanks!

Hey ronfya
Did you ever get any feedback on this? I haven't read the Technicolor link yet. I was just trying to figure out why my stuff comes out darker on Vimeo. Could this be because FCPX is displaying it to brightly?
A.T.

Confused... why are my exports smaller than my versions???

I am having a heck of a time figuring this out. My file size (I've not done a thing to the photo since importing it) is 4.29MB. When I export the photo as a version it's 1.81MB. What's going on here?

Ezra,
I think you may need to step back and get some of the basics of Aperture. I'd suggest starting with this part of the manual:
http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=3%26sec tion=1%26tasks=true
So with iPhoto I was able to export the exact same sized photo that was in iPhoto.
iPhoto is different from Aperture in many ways. iPhoto keeps your master, untouched (obviously at full size), and when it applies each adjustment, it derives another full-size photo which is also stored in the library. Thus, in your iPhoto library, there are 2 full sized pictures.
Aperture, however, keeps a version. The version is a recipe: applying certain instructions to the master to derive the image you want. The versions are virtual. Yes, there are thumbnails and potentially previews, but these are low-res cousins of your master, with adjustments applied. No where in the Aperture library is there a full-sized photo corresponding to your version. I.e., there is no analog to "exact same sized photo that was in iPhoto" when discussing Aperture.
If you were to export my originals with the adjustments I've made, for the sake of back-up, what's the best way to go? TIFF?
(Sorry if I'm beating a dead horse, but I'm trying to address your questions, and they all lead back to the same place...)
There is no such thing as "originals with the adjustments". Those are versions. For the sake of backup, I would use a vault.
If you wish to torture yourself for a couple minutes, you can read about the very topic you asked about, posted two days ago: Shouldn't I regularly Export versions (thorough backup).
In direct answer to your question, I have a few. The first is: since Aperture keeps your masters (if you have chosen to import into the Aperture library) and the instructions to get to any version, backing up your Aperture library is the best way to ensure your versions remain intact. To go along with that, is to back up your masters as you import them (You can review that in the Import dialog). However, and I think this is what you were asking, if you want to "bake in" adjustments, I would use TIFF. That's just my opinion. Should you choose the above torture, you will also find some other opinions. Of course, if you choose to "bake in" the adjustments, you have degraded your photo. Any further adjustments you do in the future will not produce as high-quality as if you had your master accompanied with the recipe (version).
Hope this is at least a bit enlightening!
nathan

When I forward any photos by email they are received as small image, how to change the settings

if I take or forward a picture by email to another device, the photograph comes out like a large thumbnail with low pixel quality. I can't find anywhere to change this setting.

You need to clarify your statement/question a little bit more. What device are using to take the photo? I assume that you are using your iPad, but I don't know that for a fact because you simply say "whenever I take a picture". I also assume that you are using the built in mail app and not a third party mail app, but can't say for sure about that either without more details from you.
When I take a photo with the iPad, if I attach/insert a photo in an email directly in the mail app, the photo defaults to the actual size, which is the highest resolution that it can be. The size of the photo can be made smaller, but it defaults to the largest size.

I have deleted the last imported photos thinking that the photos were kept in the album, but all my photos are now gone. How can I get the photos back from trash ?

I have deleted my file "last imported photos" thinking that the photos were kept in the album, but now all my photos are gone; How can I recover the deleted photos?
M

If you have emmptied the iPhoto trash then you're going to need a file recovery application like File Salvage

I changed my main username. Now all my folders are gone. I have timemachine. Can I undo what I've done?

I followed the mac instructions using root user to change my home username - it's like the computer reset. All my files are gone, but are in timemachine. I know I can reset them one by one, but would rather revert to the old username, Is that possible. I really need to get a hold of my Logic files. Thanks

Whatever you did, reverse it.
What instructions did you read that said to enable root to do this?

HT4528 For the second time in two weeks, my 4s has lost all my contact names. The phone numbers are still there, but every last name has disapeared. What is happening?

For the second time in two weeks, my Iphone 4s has lost all my contact names. The phone numbers still remain without any of the names, What is causing this to happen?

1. I assume that that suggests that it is not normal for a browser window to respond with minimisation? It is just weird when a window just disappears, no reason given (and since there is no obvious loss of internet it can take you by chance)
2. Good that you ask. No, it hasn't. I meant to say when I first posted.
3. Thanks, I gather that. It is just that Mavericks is so different from what I am used to. Sigh...
4. It has calmed down but there is absolutely no rhyme or reason to it. Forgot to mention that I had my first ever crash of Final Cut Pro since I have been using it nearly daily for four years. I even had Chrome crash on me in mid-upload (drat, drat, drat!). I don't click or plough on- I stop, think and consider. Hence me posting. Mavericks is just not as "smooth" as Snow Leopard to me.
5. Yes, I understand. I just wish it would show me both instead of just the one with the "1".
Tell me about it! It is impossible, I came here to answer via the link in the emailed notification, was already signed out and signed in and was returned to the front page. Had to go back to my Mail, click the link again and this time, luckily, I was signed in. In other words- the session is impossibly short and signing in doesn't return you to the browser window you were but rather returns you to the front. Meh.

All my brushes are about 20% smaller than the diameter of the circle. What's happened?

Similar Messages

Maybe you are looking for