All my components are grayed out in multisim11. Path to my config file in global preferences is also grayed out, can't change to standard cfg

all my components are grayed out in multisim11. Path to my config file in global preferences is also grayed out, can't change to standard cfg
Solved!
Go to Solution.

Hi Escapermark,
Have a look at these knowledge base articles, the first one should fix the gray out problem:
http://digital.ni.com/public.nsf/allkb/609A763289E6E81D8625739F0052151F
http://digital.ni.com/public.nsf/allkb/2719D00E36A4D53A8625721300685B3F
http://digital.ni.com/public.nsf/allkb/B3D720348D55D0C5862575BA00560908?OpenDocument
Tien P.
National Instruments

Similar Messages

  • My audio unit manager has gone, i cant scan it and all the components are in the right place, i just cant access my au manager at all in logic

    my audio unit manager has gone, i cant scan it and all the components are in the right place, i just cant access my au manager at all in logic
    any help please im going out my mind
    regards james

    Thanks for getting back to me, The AU manger was there, just when you treid to click on it, it just wasn't responding.
    But i had a scan thourgh google and found the answer, i removed the audio units cache and restarted it and all was good. I was really starting to get stressed over the matter but however i got to the bottom of it.
    Again thanks for replying
    Regards James

  • How to validate that all the components are running healthy in 12.1.1

    Hi All,
    I have just installed EBS 12.1.1, Is there any way to validate that all the components are running healthy?
    Thanks in Advance.

    Oracle-User wrote:
    Hi All,
    I have just installed EBS 12.1.1, Is there any way to validate that all the components are running healthy?You can verify that from OAM or from "adopmnctl.sh status" command.
    Please see old threads which discuss the same topic.
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Checklist&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Health+AND+check&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Checklist+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • In iTunes on my windows 7 PC, the Edit/Preferences dropdown window,some of the tab windows are not large enough to see all options that are available.  The borders of the window cannot be draged larger.  As a result, I can not uncheck or check some box's.

    In iTunes on my windows 7 PC, in the Edit/Preferences dropdown window,some of the tab windows are not large enough to see all options that are available.  The borders of the window cannot be draged larger.  As a result, I can not uncheck or check some box's on several of the preferences pages.  The Apple people at the store did not help.  I have lownloaded the latest version of iTunes and this is still an issue.  HELP.

    Is there really nobody else with this problem? Really?

  • How do you find out what application is generating a plist file in your preference folder?

    I have had two similar warnings come up in Drive Genius 3, a program that I use to manage my drives.  The warnings occur during a daily verification of preferences on my main drive, a 256GB SSD. 
    They state:
    "The preference file at '/Users/me/Library/Preferences/com.analogsolutions.Football.plist' may be corrupted."
    "The preference file at '/Users/me/Library/Preferences/org.machinedevelop.National.plist' may be corrupted."
    Per Drive Genius' advisement, "Corrupted files can cause appplication crashes and should be moved to the Trash." I delete the files, however they are regenerated each day. 
    Q: How do you figure out what application is generating a preference file?  And is there a way to tell if this is a OS generated preference file? 
    I have searched online and cannot find any information about either Analog Solutions or Machine Develop nor am I able to discern what these particular .plist files are for... 
    Q: Are these two .plist files truly potentially harmful?
    Thanks for the Help!
    iMac
    model iMac12,2
    3.4 GHz Intel Core i7
    8 GB 1333 MHz DDR3

    Hi Everyone, sorry for the late response.  I have been monitoring my Preferences Folder; every moment I am on my computer trying to catch what application/process generates these files.  I was hoping to try your suggestions, but oddly enough the offensive .plist files have not returned since the last time I deleted them about a week ago.... strange...
    In any case, I have responded to some of your suggestions and questions that I have information on:
    X423424X wrote: Ok, can you double click the .plist file?  If so it should attempt to launch the Property List Editor (in your Utilities folder).  That way you can look at stuff in the plist.  Maybe (hopefully) there's something in there that can shed some light on who is creating it.   If Property List Editor cannot open the file (some apps create files that have the .plist extension but don't actually create the proper XML format -- probably what ProSoft was alluding to) then try opening it with a text editor.
    The .plist file when opened in text editor contains a string of (what to me seems to be) an arbitrary list of numbers.
    Linc Davis wrote: Those files have been given obfuscated names so you won't know what created them. They must contain encrypted registration data for some third-party commercial software that you use.
    Yes, seems likely...
    Linc Davis wrote: It should be fairly easy to find out what application is creating them, if you really care. Move the files to the Desktop, then log out. Log back in while holding the shift key as you click the "Log In" button. That will prevent your login items from loading, among other things. Open your account preferences and launch the login items one at a time by double-clicking them in the list. After each one, check to see whether the files have been recreated.
    Ran through login, one by one, no luck in identifying the application(s). 
    X423424X wrote: Another thought, lock the plists on the hope that whatever is using them will "choke" and complain about it (no guarantee that will work but worth a try).
    Thanks, the lock idea is the one I will try next if they ever reappear...
    X423424X wrote: Also, I don't recall if I asked this but if those plists are deleted while logged in will they be recreated during that same login session.  Or do they only appear after you deleted them and then and then logged out and back in?  Or do you have to reboot to recreate them?
    Unfortunately I do not know for certain.  Though from all my login/startup/reboot tests I believe that they are not directly linked to starting up the machine or loging in either.
    I'm not really certain why the .plist have not returned.  I haven't uninstalled any programs, though I did run a couple updates for some widgets within the last week; however that was about 3 days after I deleted the last set of .plist files and usually they reappered everyday.  In any case, given that they have not been regenerated I guess my problem is solved per se, at least I am no longer getting that annoying warning everyday.   Still, it's a bit of a mystery  
    Thanks again for all the help!

  • I installed Firefox but get all my taskbars in Dutch (being based in Belgium, Europe), but I am used to work in English. How can I change the language of the browser? Thx

    All my action buttons on task & toolbars are in Dutch
    I would like to have them in English
    How to change the language of the browser?
    Thx

    You can download the english version here. [http://www.mozilla.org/en-US/firefox/all.html www.mozilla.org/en-US/firefox/all.html]

  • My privacy questions are wrong and the email it wants to send the answers too is not my email how can I change that

    How can I change my privacy questions if the email it sends the answers too is not my email?

    Call AppleCare and talk to someone in account security. Sounds like someone has managed to hijack your account.

  • My screen continually freezes up.  I've tried closing all apps that are openfreezby double clicking on the home button and closing them. I have held down on the home button and start button simultaneously and it still freezes. Can someone out the help me?

    MY screen continually freezes up. I've tried closing all apps that are open and have held down the home button and start button simultaneously but neither helped. Can someone out there help me?

    Well the next couple of things to try would be to reset all settings, and if that doesn't help, it's probably time to restore the iOS software.
    Settings>General>Reset>Reset all settings. That will take all settings on the iPad back to factory defaults. It will not delete anything and you will not lose any data, but you will have to enter all settings again ...WiFi passwords, enable Siri, select your wallpaper, adjust brightness, turn on location services and set privacy settings, etc, etc.
    You can read about restoring the software here.
    iTunes: Restoring iOS software - Support - Apple
    Should you decide to restore the iOS, it is extremely important that you back up first so that you can restore from the backup and then sync with iTunes afterward in order to restore all content back to the iPad. It is all covered in the kb article.
    If you do not sync with iTunes, then I assume that you backup with iCloud. In that case you can erase the device in Settings>General>Reset>Erase all content and settings. Once again, backing up with I loud is I,operative before you do this so that you can restore from the iCloud backup after you erase the iPad and start over again with activation.
    You should read this first before you restore from either backup.
    How to backup and restore from a backup
    http://support.apple.com/kb/HT1766
    This is a must read before you erase the iPad should you decide to go that route.
    iOS: Understanding 'Erase All Content and Settings' - Support - Apple

  • I hAVE A NEW IMAC,   CS 5.1 will not open, says it does not have all its components---can you help?

    I have a new iMac,   CS5.1 will not open,  says all the components are not there,  can you help?

    We need the exact error message, info on how you installed it, exact system specs etc..
    Mylenium

  • New Machine - India (Components are costly here)

    I know there is lot of information available for the same but as I reside in India and all the components are costly here I m raising same question again
    I am building new machine for the semi-pro use (Not yet planned for commercial aspect of my Skills :-) )
    so I want miniman good configuration setup for CS6
    What I have came up after researching lot of places and looking at my pocket is
    Type
    Specifications
    CPU
    Intel Core I 7 3770 -   3D Generation    Cache Memory 8Mb 3.4 Ghz
    Motherbord
    INTEL DB75EN (8 SLOTS OF RAM)
    RAM
    16 GB DDR3 1333Mhz (8*2) (Will increase it later)
    Key Board+ Mouse etc.
    Cabinet
    CM HAF 912 COMBAT  TOWER (VIP SERIES) 
    Cooling System
    Radiator unit, a High thrust Fan, piping goes to CPU and liquid coolant
    OS LICENCE
    Windows 7 64 Bit
    DVD RW/BLUE RAY
    DVD RW
    Monitor
    DCR = 50 MILLION : 1 / 1920 X 1080 RESOUTION FULL HD
    Graphic Card
    NVIDIA GTX-470/580  (680 costs way beyond my budget)
    Hard Disk1
    500GB SATA 1st Solid State Drive (Operating System).   
    Hard Disk2
    1TB SATA 2nd Hard Drive (More than 7500 RPM)  
    Hard Disk3
    500GB in RAID0 for storing data files   
    Hard Disk 4
    500GB in RAID0 for storing data files   
    SMPS(PSU)
    1200W
    Mostly I will be editing DSLR footage. (My friend has Canon Mark II 550 D)
    Please help... Please recommed minimum but good performing Graphics Card

    >CM HAF 912
    That case comes with 2 fans, front and rear, and the pictures on Newegg show places to mount 2 more fans, top and side
    Consider adding those 2 optional fans to blow more air into the box... cooler components generally last longer
    >Windows 7 64 Bit
    Make sure you get the PRO version to be able to go above 16Gig of ram
    >500GB SATA 1st Solid State Drive
    I agree with Harm that you do not need that large/expensive a boot drive... I have Win7 64bit Pro and CS5 Master Collection and MS Office Pro and all the "usual" My Documents stuff on my boot drive, and all that only uses 70Gig of space
    Drive C space http://forums.adobe.com/thread/1007934?tstart=0
    I also have my Windows swap/page file on my 2nd hard drive... find instructions at http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US

  • I just updated to iOS5 and all my contacts are gone!

    I updated to iOS 5 and before it applied the update it said "Backing up Marc's iPhone".
    After the update, I went to load back my contacts and it says: "iTunes could not restore the iPhone "Marc's iPhone" because the backup session failed.
    It would have been nice to mention that at the time, before I lost all the content.
    I can see no way back from this.
    I've gone back to another backup, and that says the same thing.  Apparently, all my sessions have been quietly failing.
    So, assuming I can actually source them again, I now have to type in around 300 contacts, by hand, one at a time.
    I will never buy another Apple product.

    I've backed up and restored contacts before, and it's been fine.
    But since the IOS 5 "upgrade", it seems that things don't work so well.
    I can't restore from the backup that the update took, nor from older backups.
    As luck would have it, I remembered that I tried syncing contacts to Google a while back, so I've recovered *some* items from there by setting up the sync again (iOS/iTunes had managed to lose it, along with all my email accounts etc).  Google also lets you export your contacts to a CSV file, which is a bonus.
    I'm not sure about why some contacts were synced to Google and others not, I'll look into that later.
    All my photos are lost, apparently forever.
    Next time I buy a phone, it will be one where I can just drag'n'drop to copy files.  Probably Android- I'll certainly not buy another Apple product.
    I'm curious about some of what you say: why go through the setup ON THE PHONE?  What difference does it make?
    I'm reluctant to do anything much more interesting now- it seems that I can no longer trust iTunes (never liked it much, I have to say: I don't find it at all intuitive).

  • BIBeans connection with out using config file

    Hi All,
    I am trying to deploy BI Beans but I do not want to use config file. I am establishing connection to OLAP and catalog using connection object and can successfully connect. But the problem arises when I am using JSP to load any presentation as BIThinSession tag needs a config file.
    Can any one tell me how can I get around this problem? How can I present BIBeans presentation with out config file?
    Many thanks
    Shantanu

    try also to run the sql scripts
    AMDPATCH.sql and OLAP.sql,that are in the oracle or jdeveloper folder,launching them i solved this problem
    verify also that the bi_checkconfig don't present any problem loading OLAP metadata
    bye

  • [Flat File Destination [220]] Error: Failed to write out column name for column "Column 2"

    I am using SSIS to extract fixed width data into a flat file destination and I keep getting below error. I have tried almost everything in this forum but still no solution. can anyone help me out to solve this problem.
    [Flat File Destination [220]] Error: Failed to write out column name for column "Column 2".
    [SSIS.Pipeline] Error: component "Flat File Destination" (220) failed the pre-execute phase and returned error code 0xC0202095
    Thanks

    Hi Giss68,
    Could you check the Advanced tab of the Flat File Connection Manager to see whether the InputColumnWidth and the OutputColumnWidth properties of the Column2 has the same value? Please refer to the following link about the same topic:
    http://stackoverflow.com/questions/10292091/how-do-i-fix-failed-to-write-error-while-exporting-data-to-ragged-right-flat-fil 
    If it doesn’t work, please post the sample data and the advanced settings of Column2 for further analysis.
    Regards,
    Mike Yin
    If you have any feedback on our support, please click
    here
    Mike Yin
    TechNet Community Support

  • My iCloud Backup button is grayed out and i cant turn it on. All my devices are on Wifi. Help!

    my iCloud Backup button is grayed out and i cant turn it on. All my devices are on Wifi. Help! Both my ipad and iPhone

    A number of employers will push a security profile to your phone when you add their exchange account that prevents you from backing it up to iCloud.  They do this because they don't want confidential company information on another companies servers.  If this is the case, you will find a setting called "Profile" in Settings>General near the bottom.
    You would have to contact the company's IT department to confirm that they are preventing you from backing up to iCloud but that's normally what causes the iCloud backup setting to be grayed our or missing from an iOS device.

  • I couldn't migrate outlook .pst files to thunderbird.when i tried to import from the tools tab all the options are grayed out.

    I couldn't migrate outlook .pst files to thunderbird.when i tried to import from the tools tab all the options are grayed out.

    http://kb.mozillazine.org/Import_.pst_files

Maybe you are looking for