All my data shifts to "Other" category and then won't re-connect to iTunes.

Hi,
This will be hard to explain. I've been using my laptop to connect through iTunes on Vista for the last seven months, and no problems have occurred at all. I have 80gb+ data combined with music and video on my iPod, but all of a sudden when I went to sync my iPod with iTunes, the USB connects and the iPod reads as "Connected," but iTunes won't recognize.
Then when I disconnect the cable, iTunes appears with the following message: "iTunes cannot read the contents of the iPod. Go to the Summary tab in iPod preferences and click Restore to restore this iPod to factory settings.
And I would LOVE to do that, but I've already needed to disconnect the USB to the iPod because iTunes wouldn't recognize it until after it was already disconnected.
I'm at a loss for words here because I've been an iPod user for three years now, and I've never had this happen to me before. I would gladly Restore my iPod if only I knew how to have iTunes recognize the iPod.
Can anybody assist me with this? I really need it, thank you.

I still don't know what the cause was for all my data suddenly shifting to "Other," therefore making it unwatchable and me unable to listen to the music, but I decided to go into the iPod manually from "My Computer," and click on the iPod drive that opens a number of other menus (such as Notes, Calenders, etc.; just the basic selections within the iPod itself).
When I clicked the drive and was looking at the options, I highlighted them all -- with iTunes still running -- and deleted them. Eventually, the iPod was finally recognized by iTunes, and so I cancelled the delete, and was able to click "Restore" when the iPod was at last recognized.
It's syncing all my music and videos back up now, so I'm happy. It might not have been the safest thing to do to the iPod, risking permanent deletion of certain necessary files that could render it useless in the end, but I was desperate and thankfully when the iPod was restored all the files I had previously deleted were created again, making the whole decision quite successful (thus far.)
Thanks.
Message was edited by: undefinability
null

Similar Messages

  • HT201263 The restore stops encountering an error and then i see the connect to itunes image and nothing happens.

    The restore stops encountering an error and then i see the connect to itunes image and nothing happens.PLEAS HELP

    Are you trying to restore as new or from a back up? Is iTunes  and your computer all up to date?

  • I have an apple ipad 1 and suddenly I can't connect to itunes says cannot allocate memorary what do I do, I have an apple ipad 1 and suddenly I can't connect to itunes says cannot allocate memorary what do I do

    I  have an ipad 1 and all was fine until the other day and now I can't connect to itunes a box pops up saying cannot allocate memory, what does this mean and howdo I fix it

    Try quitting all apps and restart your iPad. Maybe you are running out of memory on the iPad. It's worth a try.
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or try a reset,
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • I updated to 5.1 and now its stuck on "connect to iTunes screen" do anybody know how to fix issue?

    I got a messgae on my screen about the 5.1 update on my iPhone 4 so I clicked update. My device turned off then the apple screen popped up and it began to perform the up date. after the loading bar was full it went to a connect to itunes screen so I did but nothing happened and iTunes will not recognize my device. I have uninstalled iTunes and reinstalled it. I also held the home/sleep button while holding menu button. Can someone please help me???????/////

    Similar problem here. I have the 4s model and I try to do the update but when it downloaded the update it said that a problem occurred and then switched to the connect-to-iTunes screen.
    Any ideas?

  • How to reduce the data in the "Other" category on the iTunes devices sync page?

    How can I reduce the amount of date found in the "Other" category at the bottom of the screen on the iTunes device sync page?
    or
    How can I view what data is contained within the "Other" category?
    and
    I have 5.38 GBs of data in the "Other" category that I need to reduce or eliminate.

    I got the answer off another thread I was reading. Just trying to spread it around now.
    Go to:
    Settings>General>Usage
    Now for me, I have about 6GB of music on mine. What I did was select music, Now Left swipe the All Music row and press delete. After that I opened up my phone on iTunes and synced it like normal. The other data was gone after that.
    Hope this helps everyone!

  • I just plugged my iphone in to download some pix to my computer and my phone is now showing a plug with the itunes icon and its telling me I have to restore my phone and will lose all my data. *** is going on and how can I go back?

    i just plugged my iphone in to download some pix to my computer and my phone is now showing a plug with the itunes icon and its telling me I have to restore my phone and will lose all my data. *** is going on and how can I go back?

    "I have logged in to my itunes account on a different computer and none of my purchased music is showing up."
    Correct.  it does not magially appear in other places.  It will only be where you put it.
    "I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where  I sync everything. "
    Correct as well.  Iphone will sync with one computer at a time.  Syncing to another will erase the current content.
    You need to copy everything ( itunes library/contacts/pics/calendars/files/docs) from the old computer, or your backup copy of the old one, to the new one.

  • What has happened to all my data files in pages, numbers and keynote?  they have all disappeared (though i do not yet have ios8)

    what could have happened to all my data files in pages, numbers and keynote?  they have disappeared - though i'm not using ios8

    I have the same problem. For about 1 month ago I extended my iCloud storage account (+20 GB) in order to maintain my backups for iPHONE and iPAD as my account would expire 14/10. In spite of this, I got an email 15/10, which said that iCloud was reduced to 5 GB. 2 hours later I received a new email with comfirmation on the purchase of +20 GB storage plan. However, I only have access to 5 GB on my iPad and iPhone. Called Apple Support but they couldn´t help me. Did you find any solution ?

  • I have a G5 with Tiger to sell and want to erase all my data from it, but the cd drive won't work so I can't use the OS10 start up disk. Answers?

    I have a G5 to sell and want to erase all my data from it, but the cd drive won't work so I can't use the OS10 start up disk. Any way to do it?

    Do you have another Mac? If so, you can startup this one in "Target Disk Mode" (instructions here) and connect it to another Mac to delete the home folders (or the entire drive, if that's what you want).
    One piece of advise, though: after deleting the data, and of course emptying the Trash, it wouldn't hurt to also securely erase the "free space" of the drive (instructions here) before disconnecting the old Mac from the new one. This can be helpful, since "deleted" data is often retrievable with ease unles it's written over after the deletion.

  • Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that- thanks

    Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that… thanks

    There's more to it than that.
    Folders in Aperture do not hold Images.  They hold Projects and Albums.  You cannot put an Image in a Folder without putting it in a Project or an Album inside that Folder.
    The relationship between Projects and Images is special:  every Image must in a Project, and can be in only one Project.
    Images can be in as many Albums you want.  Putting an Image in an Album does not move it from the Project that holds it.
    You can make as many Versions from a Master as you want.
    What you want to do may appear simple to you, but it still much adhere to how Aperture works.  I still can't tell exactly what you are trying to do (specifically: Images don't live in Folders; moving an Image from a Folder is non-sensical).
    It can be very confusing (and frustrating) to get going with Aperture -- but it does work, and can be enormously helpful.  If you haven't, take a look at the video tutorials on Apple's Aperture support site.
    I feel as though I haven't helped you much -- but we need to be using the same names for interface items in order to get anything done -- and my sense is that you still haven't learned the names of the parts.

  • I cannot add an e-mail account (Cox) on my iPhone 5S that is in the "Other" category and is a POP account.  The phone seems to automatically create the account as IMAP. How to I create a POP account?

    I cannot add an e-mail account (Cox communications) on my iPhone 5S that is in the "Other" category and is a POP account.  Yhje phone automatically creares the account as IMAP.  How do I create a POP account?

    This indicates corrupt files.
    A restore should resolve.

  • How can i open the directory/​folder and read all the files inside it in order and then close it?

    How can i open the directory/folder and read all the files inside it in order and then close it? any example would be nice.
    thanks

    In the File I/O>>Advanced File Functions Palette is a function named "List directory". This function will give you two arrays. One contains the names of all subdirectories the other the names of all files. If you want to sort them by name use the array sort function. If you want to sort them by another attribute use the File/Directory Info function to get more data. Use a cluster which contains the attribut to sort and the original index of the name. Then sort this array.
    Waldemar
    Waldemar
    Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
    Don't forget to give Kudos to good answers and/or questions

  • Is there a way to select all emails at once on the iPad and then delete them at one time?

    Is there a way to select all emails at once on the iPad and then delete them at one time?

    Tap on the edit button at  the top right of the email list. This will let you select the emails to delete, once all are selected, tap on the bottom right button that says delete to delete them all at once.

  • When I was updating my ipod touch 4g 8g 4.3.3 the USB came out and now it just shows connect to itunes and when i try to update it comes with error 6. I do all of the help things and nothing

    When I was updating my ipod touch 4g 8g 4.3.3 the USB came out and now it just shows connect to itunes and when i try to update it comes with error 6. I do all of the help things and nothing happoned

    First see if placing the iPod in Recovery Mode will allow a restore.
    Next try DFU mode and restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    If not successful then time for an appointment at the Genius Bar of an Apple store. You are not alone with this problem.

  • My ipod classic got wet back in August.. it seemed to work fine for about a month, but recently is not working at all..screen appeared to get cloudy and then it just stopped working. thanks.

    my ipod classic got wet back in August.. it seemed to work fine for about a month, but recently is not working at all..screen appeared to get cloudy and then it just stopped working. thanks.

    Most likely, water damage.
    You can try putting your iPod in a tupperware, half filled (maybe half inch) with rice grains, close the cover for about a week.
    If you have done this, as soon as it got wet, higher chances of success, now looks like the water moisture is getting to the LCD screen.
    Then you can always bring it to Apple Genius bar, for a an overhaul. (may cost you half the price of a new iPod classic.)

  • I re started my computer and re intalled itunes. all my music is on my iphone and i cannot get it back on itunes. when i try to sync it tells me i am going to loose all my music. i really don't wont to go through all my CD's again so can any one help

    i re started my computer and re intalled itunes. all my music is on my iphone and i cannot get it back on itunes. when i try to sync it tells me i am going to loose all my music. i really don't wont to go through all my CD's again so can any one help

    See Empty/corrupt library after upgrade/crash or
    Recover your iTunes library from your iPod or iOS device.
    tt2

Maybe you are looking for

  • SUS - Purchase Order and Change Order Response

    Hi,    We have a requirement to display the Original PO and Changed PO in the list of PO's if the change PO is generated before the original PO has been confirmed. In other words, if there is a PO that was sent to Supplier and a change was made to th

  • MR11 - clearing not related stocks

    Hi Sirs, I would like to know, is it possible to maintain when we run trans.MR11, clearing posting not corresponding with account for stocks in warehouse? And where I have to change the accounts if it is possible? That's because our client want to ch

  • XI 30 -- PCK Connectivity ::: Not able to connect.

    Hi All, Scenario : I am trying to send information from the XI30 Integration Server to the  PCK (which is installed on separate WAS). I have configured a XI Adapter at integration Server (XI30) which is used to connect to PCK system, when i am trying

  • My macbook has stopped playing videos, why?

    Macbook has suddenly stopped playing videos.  Please help

  • Regarding MV45AOZZ and MV45AIZZ, using these includes display the fields

    Hi, using the MV45AOZZ and MV45AIZZ includes i have to display some fields in display mode even in chage mode. The requirement is to make certain fields display only. This would prevent certain users ( SPOC ) not to edit or change these fields withou