All My Files not cataloging by date opened

I use the All My Files system for tracking my workflow, and I see in Yosemite that it does not catalog my work (files) by date opened reliably;  I have opened many files today, and yet this afternoon it shows that I have only opened five files today.  This was not the case in Mavericks.  Anyone else experience this?

When viewing files in All My Files view, date last opened is not updating properly ever since Yosemite installed.  In Mt. Lion did not occur.  Since the Yosemite install - we've tried opening many different pages & preview files, same thing occurs.  I've had 4 appointments at Genius Bar about this and no one has figured out a fix.  Genius Bar already re-installed Yosemite and bug still there.  Last thing Genius Bar was going to do today was a Manual Migration of data (see my repair history) - but when I came to check in, Genius Bar person found your post dated 2 days ago with identical situation.

Similar Messages

  • Nexus 5548UP Downgrade from 5.1.3.N1.1 to 5.0.3.N2.2b fails -- SRG file not present/cannot be opened

    I am attempting to downgrade from 5.1.3.N1.1 to 5.0.3.N2.2b for standards compliance.
    When following the ISSU steps for validation of the install all command I receive the following error on the following command:
    sh install all impact kickstart bootflash:n5000-uk9-kickstart.5.0.3.N2.2b.bin system bootflash:n5000-uk9.5.0.3.N2.2b.bin
    Verifying image bootflash:/n5000-uk9-kickstart.5.0.3.N2.2b.bin for boot variable "kickstart".
    [####################] 100% -- SUCCESS
    Verifying image bootflash:/n5000-uk9.5.0.3.N2.2b.bin for boot variable "system".
    [####################] 100% -- SUCCESS
    Verifying image type.
    [####################] 100% -- SUCCESS
    Extracting "system" version from image bootflash:/n5000-uk9.5.0.3.N2.2b.bin.
    [#                   ]   0% -- FAIL. Return code 0x404F0003 (SRG file not present/cannot be opened).
    I followed some recommendations from this post https://supportforums.cisco.com/thread/2108814
    reload to clear temp and cache
    show system internal flash
    checked md5sum of image
    I found this information http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/deferral/Deferral_Advisory_Notice_N5K.html
    I am unsure of how to upgrade when the steps to validate indicate a problem with the upgrade/downgrade.
    I still receive the error.
    Any help would be greatly appreciated.
    Attached are the steps done so far and outputs.

    I had already created a case with our reseller.  The engineer there had me reload the 5ks and attempt the show install all impact again.  When I did it was successful.
    I was able to then downgrade to 5.0.3.N2.2b.  I am currently working to duplicate the issue by going back to 5.1.3.N1.1.
    The engineer also stated that I was probably running into this bug:
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsw25835
    Here is the contents of the sh system internal flash and show system internal dir /var/tmp:
    Mount-on                  1K-blocks      Used   Available   Use%  Filesystem
    /                            409600     72564      337036     18   /dev/root
    /proc                             0         0           0      0   proc
    /post                          2048         4        2044      1   none
    /var                         409600     72564      337036     18   none
    /sys                              0         0           0      0   none
    /isan                       1536000    409628     1126372     27   none
    /var/tmp                     307200        72      307128      1   none
    /var/sysmgr                 1024000         0     1024000      0   none
    /var/sysmgr/ftp              409600        68      409532      1   none
    /var/sysmgr/ftp/cores        102400         0      102400      0   none
    /callhome                     61440         0       61440      0   none
    /dev/shm                     524288    126552      397736     25   none
    /volatile                    153600         0      153600      0   none
    /debug                        20480         0       20480      0   none
    /dev/mqueue                       0         0           0      0   none
    /debugfs                          0         0           0      0   nodev
    /mnt/plog                     49024      1300       47724      3   /dev/mtdblock2
    /mnt/cfg/0                   114909      4274      104702      4   /dev/sda5
    /mnt/cfg/1                   112920      4274      102816      4   /dev/sda6
    /var/sysmgr/startup-cfg      409600      2104      407496      1   none
    /dev/pts                          0         0           0      0   devpts
    /mnt/pss                     114917      5923      103060      6   /dev/sda4
    /bootflash                  1609984    779460      748740     52   /dev/sda3
                                                                    ./         640
                                                                   ../         240
                                                       bootloader_ver            0
                                               util_cli_history_admin           48
                                                                mysrg         1664
                                                        mcm_ascii.log         1019
                                                     m2rib_ascii.3248           68
                                                               arping          101
                                                            stp.log.1         3836
                                                             fwm1.out            0
                                                        cmp_slot_id.1            0
                                                               ntpd_1            0
                                                         ntp_client_1            0
                                                     ntp__libdapi.log            0
                                                     igmp_restart.log            0
                                                     radius_debug.log          232
                                                          cfs_mac.log          166
                                                           climib.log         1416
                                                              lcc.log          694
                                                      security_stderr           77
                                                      security_stdout            0
                                                        aaa_debug.log          519
                                                   security_debug.log          647
                                                            evmc.3005           31
                                                           idehsd.log          602
                                                            mvsh.3000            0
                                                            lockcisco            0
                                                              .flexlm/          60
                                                                 logs@          20
                                                      first_setup.log         2981
                                                      boot_uptime.log           56
                                                                  vsh/          40

  • Metagen is skipped sometimes complaining because all output files are up-to-date with respect to the input files

    Hi,
    In one of my dll (VS2010), the process Skipping target "MetaGen" because all output files are up-to-date with respect to the input files.
    it is at  random.  I have checked the time stamps of the dll and metagen.write.1.tlog both having the time stamp on the failed build.  But all files in release folder did not have the same time.  They are one hour earlier than the dll
    and the  metagen.write.1.tlog.
    On the good build  it said the input file is is newer than output file ".\Release\\metagen.write.1.tlog" and allfiles in the release folder have same time stamp.
    Any clue to solve this ?
    Regards,

    Hi,
    Based on your post, I am not very clear about your issue. I feel your issue is out of support range of VS General Question forum which mainly discusses
    the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
    and Visual Studio Editor.
     Could you please provide us more information so that we resolve your issue better?
    What type of project are you working with? C++ MFC project?
    How was the
    metagen.write.1.tlog file generated in your project?
    What error messages did you get?
    What is the 'input file'?
    If possible, please provide us a sample project to reproduce your issue.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • View the .rtf file not display the data in BI Publisher Enterprise.

    Hi,
    Platform: OBIEE 10g in NT XPsp2
    View the .rtf file not display the data in BI Publisher Enterprise.
    Step 1, I created Answer-request, create .rtf file with Word and add the request name, Add bar chart and table, preview PDF is working fine with data, Upload this template to Answers, View Template from Answer is working fine with data.
    Step 2, Answers – More Products > BI Publisher > My Folders > Create a new report > Edit > Data Model > New > Type: SQL Query > Data Source: Oracle BI EE > Query Builder > from SupplierSales assign Customer, Periods, Sales Facts (select Region, state, Year, Units Shipped) > Results > Save > Save
    Click Layouts > New > enter Name ….. > Click Layouts > borrows .rtf file in Manage T file > Upload > Save > Click View
    It is showing only the .rtf file without data. Why there is no data?
    Please guide me to solve this issue.
    Thanks,
    Jo

    Thanks for you reply,
    Our scenario is this report is basically a dissconnected mode report... we are developing these reports for mobile clients.
    We dint face this kind of issue while developing other reports.
    So please let us know if you have any idea on why we are facing this issue.
    Regards,
    Maneesh

  • Got a SACD rip and all the files ending .dsf How I open it?

    I new to this 
    I got some music SACD rips and all the files ending .dsf  How I open it?

    double click my domain in the Applications folder in i web
    Just so we're on the same page you mean when you double click on the domain file that's located in your Users/Home/Library/Application Support/iWeb folder, right?
    if we're on the same page try the following:
    delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home() /Library/Preferences folder.
    go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
    launch iWeb and try again.
    If that doesn't help continue with:
    move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
    launch iWeb, create a new test site, save the new domain file and close iWeb.
    go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
    move your original domain file from the Desktop to the iWeb folder.
    launch iWeb and try again.
    OT

  • "All my files" not showing spreadsheets or presentations

    "All my files"  in Finder is not showing spreadsheets or presentations.  I gone through the options but there is no option for spreadsheets or presentations.  To be honest I'd expect them to be covered by the 'documents' option.
    I know I could create a custom search but surely it's a basic thing to list all office document types?  Have I missed something?
    How can I get these file types to show in "all my files' ?

    Here's another data point:  I found some PDFs under my Documents folder that weren't showing up in AMF.  I found that simply opening one up in Acrobat Reader would cause it to show up in AMF (I didn't have to change and re-save the PDF). 
    I did notice that if I selected multiple PDFs at once and opened them all at the same time, some of them would then appear in AMF, while others wouldn't.  But opening up a single PDF by itself would always add it to the files shown in AMF (as long as the PDF was somewhere under my User folder - if I first copied the PDF to a second hard drive that's not under my User folder and *then* opened it, it still wouldn't show up in AMF.)
    In short, here's what I've discovered so far:
    1)  AMF doesn't seem to index anything that's not somewhere under my User folder.
    2)  Not everything under my User folder shows up in AMF, but if I open a "missing" file that's under my User folder, it will then show up in AMF. (Except for pictures and songs - see #3)
    3)  AMF doesn't index anything that's in my iPhoto or iTunes libraries (even after opening a picture in iPhoto or playing a song in iTunes.)
    4)  AMF doesn't index attachments to Mail messages unless you download the attachment (presumably because it's then stored under your User folder.)
    5) AMF will only seem to (sometimes) index Excel spreadsheets if they're saved as .xlsx files.  Even opening, changing and saving a .xls file won't get it to show up in AMF afterward.  Spreadsheets are strange, in fact.  Even with some .xlsx files, they'll show up in AMF *while I have them open in Excel*, but as soon as I close them in Excel, they disappear from AMF again.  This is the only types of file I've seen disappear from AMF after they've shown up once - all the other file types seem to stay in AMF once you can get them to show up there.

  • File not found error when opening securedoc.html

    We are having a sudden issue where recipients of our secure envelope emails will open a message from us with attachments and they will get a "File Not Found" error message.
    We are still using a Post X appliance, but no config changes were made whatsoever and this started happening since last weekend. (Oct. 9-11)
    I did reboot the Post X box and thought the problem was fixed w/ the reboot. I sent a secure message to myself and then opened it along with the attachment and all was good. I sent the second test and the problem was back; "File not found".
    I have noticed that when I get file not found the address bar in my browser is pointing to: https://res.cisco.com/websafe/eo/error?error=notfound
    The time after rebooting when it did work it pointed to file on my local computer hard drive:
    file:///C:/Documents%20and%20Settings/mymachine/Local%20Settings/Temporary%20Internet%20Files/PXTemp/-6pAQ4_Y5hJEmKdQhtG8lhNx0zo!/PX_L_1255377132267.html
    Any ideas what could have caused this sudden issue? How do we resolve? I have a call into support, but they have been researching it all day and our secure mail is down!

    used bridge, didn't work.
    tried right-click, double click..open in program.
    same error.
    files work in other adobe products.....
    only way to get a jpg in there is to "paste" it in.

  • Script to open all PST files in a directory and open with Outlook.

    Hi!  I am looking for a script that opens all PST files in a directory, opens it in outlook, and writes to a log to see if it completed correctly.  I'm new to VBscript and just want to see how the script would be written.
    Thank you!!

    Thank you for all the input!  JRV, I went through the repository and couldn't find anything about importing into Outlook.  I will use it for future references and I appreciate you directing me there.
    Grant, I need to be able to locate all PST files within a directory, not point it to a specific pst.  I also need it written to a log file.  Here is what I have...Don't laugh, I'm very new...
    const ForAppending = 8
    set objTextFile = objFSO.OpenTextFile ("C:\Users\jimmy.nguyen\Desktop\Lucky.txt", ForAppending, True)
    set objFSO = CreateObject("Scripting.FileSystemObject")
    Set objShell = CreateObject("WScript.Shell")
    strCommand = "C:\Program Files (x86)\Microsoft Office\Office12\outlook.exe"
    Set objExecObject = objShell.Exec(strCommand)
    wscript.sleep 4000
    Set myOlApp = CreateObject("Outlook.Application")
    Set myNS = myolapp.GetNamespace("MAPI")
    myNS.AddStore "objfile.name"
    Sub ShowSubFolders(fFolder)
    Set objFolder = objFSO.GetFolder(fFolder.Path)
    Set colFiles = objFolder.Files
    For Each objFile in colFiles
    If UCase(objFSO.GetExtensionName(objFile.name)) = "pst" Then
    objFile.Name
    End If
    Next
    For Each Subfolder in fFolder.SubFolders
    ShowSubFolders(Subfolder)
    Next
    End Sub
    strResults = ShowSubFolders(fFolder)
    objTextFile.WriteLine(strResults)
    objTextFile.Close

  • Not all iTunes Files not showing up on External HDD

    My old TC (the flat model from back to 2008 I think it was) broke down the other night so I removed the WD 2.0TB HDD (containing over 30'000 music files) to run this as an external HDD. I had swapped the original 500Gb with a 2TB drive which worked super for a couple of years.
    Anyway, before all of this happened all songs showed up on iTunes and each single one could be played correctly from iTunes (without the ! should the file not be found) so all files were located through iTunes to the correct directory. Only one directory for my Music files...
    Now, when I connect the HDD through an USB cradle (nothing has been touched on the drive) only a fraction of the files actually show up in the directory which is very odd indeed? I believe it was the same when the thing was actually working but didn't give it a think as it was doing what it was expected to do.
    Next step was that I copied the whole HDD over onto my MAC and sizewise all (?) the files came over but still not all are showing...
    So, how can I make sure all the files are being included as I want to move them all over to my new 2TB TC?

    Thanks Limnos for taking your time with this.
    Here's what happened
    1) All my Music was stored on a TC 2.0TB WD hard disk which I shared with my partner.
    2) All music in iTunes were mapped to this specific location and only this location.
    3) When opening the folder on the TC only a fraction of the actual music folders were available to see (i.e. Artist The Wonder Stuff folder was present and in this folder only 2 album folders were found when in fact there should have been 12)
    4) All songs in iTunes did play correctly so if i wanted to listen to one of the The Wonder Stuff songs they would all play (even albums that did not show up in the artist folder from above).
    5) When clicking show file in finder, the file would show up and then again when going back manually into the folder as above.
    6) TC dies on me. No more power.
    7) Took out the HDD and put it in a cradle to extract the songs.
    8) Right click on the folder shows there are about 35'000 files which sounds right BUT only a fraction of these can be seen.
    9) Now I cannot do the show in finder through iTunes as the directory no longer exists (the TC died and I threw it away, except for the HDD).
    10) The files are on the HDD but I cannot see but a fraction of them when opening the folder...
    I hope this makes it a little more clear.
    I honesty do not know what to do as I know the files are there but cannot see them and thus map them in iTunes... :-(

  • Control file not updated till date in RAC two node database

    Hi,
    Good day.
    To my surprise i found that control files, in our database RAC with two nodes, are not updated till date except one from node 1 and another from node 2.
    But we got all the controlfile names in the init parameter file, in both the nodes.
    Node 1
    bash-3.00$ ls -lrt
    total 922128
    -rw------- 1 oracle dba 157286400 Nov 3 2007 cntrl03.dbf
    -rw------- 1 oracle dba 157286400 Nov 3 2007 cntrl02.dbf
    -rw------- 1 oracle dba 157286400 Apr 12 17:21 cntrl01.dbf
    Node 2
    bash-3.00$ ls -lrt
    total 922128
    -rw------- 1 oracle dba 157286400 Mar 30 09:17 cntrl03.dbf
    -rw------- 1 oracle dba 157286400 Mar 30 09:17 cntrl02.dbf
    -rw------- 1 oracle dba 157286400 Apr 12 17:20 cntrl01.dbf
    As you could see cntrl01.dbf is the only file updated till date in both the nodes. The database is running fine.
    what is actually happening?
    Any suggestions?
    Thanks,
    Balu.

    As you're using RAC it is very likely that you are using an SPFILE.
    Connect as a DBA account (or an account with SELECT ANY DICTIONARY privileges) in both the instances and do "show parameter spfile" and "show parameter control" (or query V$parameter)
    It is likely that the spfile is referencing only 1 controlfile.

  • IMac not reading hard drive, spotlight not working, all my files not showing... help!!!

    Hi folks,
    I got home from a three week trip and turned on my imac, at first i realized it was running extremely slow. Then i plugged in my external hard drive, and it didn't read. I checked in disk utilities and profiler, and my hard drive was there, just not appearing in finder or desktop. I couldn't mount (it was grey) the hard drive in disk utilities either. (I tried with other hard drives, same problem; they all worked before)
    Afterwards, I found out that spotlight wasn't working at all, it wasen't even initializing (see attached screenshot). When i opened "all my files", nothing appeared in the window - it was blank. Another thing is, launchpad scares me - it loads incredibly slow and the screen keeps refreshing itself.
    Please help!! I don't want to reinstall the whole system and lose all my file, cause right now, I cannot backup anything since it won't read my hard drives!! Could this be some kind of apple-virus..
    Anyone else with a similar situation? My system is 10.7.5, processor: i3

    This is not related to any kind of malware.
    It sounds like something is going very wrong with your machine, but I'm unsure what that might be that would prevent all external hard drives from working. Are you able to start up in recovery mode (hold down command-R at startup)? If so, from recovery mode, open Disk Utility and select your internal hard drive. What does the SMART Status say?

  • Why do all same file types in a directory open?

    When I double click a certain file type in a directory (a jpeg image for instance), why do all the jpegs in that same directory open also? How can this be disabled? It's a little annoying. Is this setting in a specific application's preference or can it be changed in Finder preferences or system settings?

    that does not sound normal. user/library/preferences and delete all com.apple.finder.plist files found? restart finder and perhaps that will help...

  • Why are all jar files not compressed in the JRE installer?

    I used 7zip to unpack jre-6u12-windows-i586-p.exe (Oracle JRE Installer). On unpacking, I got a core.zip, a zipper.exe and a few other files.
    Again on exploding core.zip I found a few things. core.zip contains all the jar files just like it would be after installation except for 7 jar files.
    charsets.jar
    deploy.jar
    javaws.jar
    jsse.jar
    localedata.jar
    plugin.jar
    rt.jar
    Instead of these jar files there exists the corresponding packfiles
    charsets.pack
    deploy.pack
    javaws.pack
    jsse.pack
    localedata.pack
    plugin.pack
    rt.pack
    I think these are files created by pack200.exe & unpack200.exe is run on them after installation to create the corresponding jar files.
    So now I have a few questions
    Why are only these 7 files run through pack200.exe. I assume its because they are bigger than other files. But it wouldn't take that much effort to pack all jar files & unpack them after installation.
    The .pack extension suggests that these are packed but not gzipped. Again why would Oracle not do a gzip also? for eg with rt.jar packing reduces size from 45 MB to 12 MB, while adding gzip also reduces it to 6 MB.
    Edited by: 966944 on Oct 22, 2012 8:19 AM

    Whatever the truth of all this may be, you won't find it here. This is a user to user forum, not Oracle support or a channel to the developers. All you will get here at best is valid post hoc reasoning: at worst, guesswork. And if you're trying to bring this issue to Oracle's attention, again this isn't the place to do it. Locking the thread.

  • ABAP to select all AL11 files based on creation date

    Hi,
    I want to create an ABAP that can select all the files in all the subdirectory folders for a given SAP Directory. The files I want to retrieve will be based on the creation date, i.e. when the file was written to the server, it must be greater than 1 hour and less than 3 hours. The problem I have is, I don't know of any table that stores this type of information. Can any one hepl?
    Thanks, D

    Hi,
    here's a sample-prg.:
    REPORT zzzz66 .
    TABLES epsf.
    PARAMETERS dir  LIKE epsf-epsdirnam DEFAULT '/home/user1/'.
    PARAMETERS file LIKE epsf-epsfilnam DEFAULT 'file001.dat'.
    DATA mtime TYPE p DECIMALS 0.
    DATA time(10).
    DATA date LIKE sy-datum.
    CALL FUNCTION 'EPS_GET_FILE_ATTRIBUTES'
         EXPORTING
              file_name              = file
              dir_name               = dir
         IMPORTING
              file_size              = epsf-epsfilsiz
              file_owner             = epsf-epsfilown
              file_mode              = epsf-epsfilmod
              file_type              = epsf-epsfiltyp
              file_mtime             = mtime
         EXCEPTIONS
              read_directory_failed  = 1
              read_attributes_failed = 2
              OTHERS                 = 3.
    PERFORM p6_to_date_time_tz(rstr0400) USING mtime
                                               time
                                               date.
    WRITE: / mtime,
           / date, time.
    pls reward useful answers
    thank you!
    Andreas

  • "All My Files" not working correctly

    I'll keep this as brief as I can.
    Problem: In Finder "All My Files"
    Purchased iMac 27inch a few weeks ago.
    Moved all my music and photos onto the new computer.
    AMF just shows nothing.
    Rang Applecare, they got me to do numerous things (refresh spotlight, refresh the finder preference files, complete restore of OSX) but in the end it had them stumped.
    Returned back to Applestore, they said they had seen it before but as mine was only a few weeks old they would replace.
    Got it home yesterday, checked AMF as I was moving music and pictures onto it from external HDD all working fine, files appearing as you would expect.
    Today, checked AMF, only two files showing (about downloads, about stacks) nothing else.
    I'm at the point where I am just going to ignore the problem, not ideal I know but still.
    Could this be a bug with OSX?  Something I am doing wrong?
    Any replies appreciated.

    I would recommend restarting  your media migration and use Migration Assistant, it's the easiest and quickest method. AppleCare can help you through that, when you call let them know the history so they can help you start with a clean slate. If you have an Apple Store in your area I'd strongly recommend booking an appointment with a Genuis who can walk you through the process. If you want to go to the trouble of bringing your iMac and EHD with you they will also help you.

Maybe you are looking for

  • System Image Utility - Create User - Activate Remote Management

    When creating an image with system image utility, based on a DVD image instead of a cloned image, I cannot create a user and activate Remote Management. I have created an installer package with Apple Remote Desktop that is supposed to do both, howeve

  • Approval For Marketing Documents

    Hi All, i would like to set an approval procedure for te marketing documents; let's say purchase order; so that if the posting date differs from the date of the posting period, the document should go for approval. I would like to put an approval for

  • OutofMemory at deployment

    Hello I wonder if anyone has a similar to the one I am experiencing. When I deploy and ear file on production environment the ejb deploys but when the war file tries to get deployed I get this error . Start server side stack trace: java.lang.OutOfMem

  • Accessibility Global Link Fuctional Pattern

    Problem Description Optimally, the application should allow the individual user to set the accessibility level. The thorny UI question is how -- particularly for users of screen readers? Setting the ADF default to screenReader would degrade the outpu

  • Can anybody suggest a good restraining device...

    because I just ordered a MacBook Pro and it is going to fly compared to my trusty G3 powerbook!!!! Just needed to share my excitement! 5-7 days before it arrives!