All my HD clips need rendering when first put on the timeline -why?

hello people, I've captured loads of HD from sony A1E and a bit of DVcam from canon XL2 , the dvcam stuff is fine, but all the HD needs to be rendered before I can see it in the canvas, I went along with it but now no more space! Is it to do with the easy setup capture settings? i set it to 1080i50 25fps, maybe my camera runs a faster fps, could it be having to convert it before i see it?
please help
mark

Your settings are obviously for DV, as your DV footage needs no rendering. When you choose the HDV Easy Setup and create a new sequence, your HDV footage will fit just fine, but then your DV footage will need to be rendered. After you resize it...because initially it will be smaller in the frame. Highlighting the clip and going to MODIFY>Fit to Sequence will make it the right size.
Shane

Similar Messages

Rendering - clips need rendering when they shoudn't

I am working on a new sequence on FCE 3.5.1 (HD imported from sony hdr-hc5 - no previous problems). Now whenever I move a clip from one track to another (whether on top of another clip in another track or not) it requires rendering and when I move it back to a track where there are no clips on tracks above or below it it needs rendering (even though all I have done is move it and haven't done anything else to the clip at all). This didn't use to happen and as far as I know I haven't changed any of the settings. It does eventually auto-render but by my reckoning it shouldn't rendering at all just because the clip has been moved. They never used to
working on G5 2.8 ghz intel core 2 duo (2GB 667) on 10.6.1
Any suggestions?

Hi Al
Aha.
Sequence is 720x576 DV-PAL. Clip is 1440x1080 aple intermed codec.
So, the sequence is wrong. Is there any way I can change the properties of the sequence without starting all over again as I have got some way down the line on the project and would like to keep the progress made to date.
Thanks for the quick response by the way.
Owen

Newly Captured Clips Need Rendering--why?

I've seen similar questions posted about things needed rendering when it seems they shouldn't...but none of the answers seem to help me and none are exactly the same, so...
Here's my dilemna:
I've been using Final Cut Pro on a G4 Power Mac with a 1.25gig processor and 1 gig of RAM and it's been fine for my purposes. Even though I've been using high def video, newly caputres clips don't need rendering until I start working with them (as they shouldn't).
BUT...I've tried installing the same software on both a MacMini and a PowerBook G4 (each having the same speed processor) and with both alternate computers a newly captured high def clip will appear with a red bar over it, I won't be able to preview anything but a still, and rendering will take about 7 minutes per half minute of video. My question is why?
It's primarly the PowerBook I want to get going on Final Cut so I can edit wherever I am, but I can't work with it if I need to render every fresh clip. Two small differences : (1) My PowerBook only has 756 megs of RAM as opposed to a full gig on the PowerMac. (2) I'd done other projects on the PowerMac with FinalCutExpress before getting Pro, so maybe there was a codec already installed on that one that I need on the PowerBook.
If anyone can help, I'd really appreciate it. It seems like what works with one 1.25 gig processor should work the same with similar chips on different computers, but it doesn't...

Quite right, David (and Jerry). My problem was indeed a matter of the setup not matching the formatting of the clips. I had a hard time understanding that this was the problem because EVERYTHING seemed to work on the PowerMac and NOTHING on the PowerBook (or MacMini which I set up with FinalCut to see if the PowerBook was to blame.)
I guess it was just a matter of being lucky that the PowerMac's setup was correct for what I was doing and unlucky that the PowerBook's was not. Anyone experiences similar confusion may also be helped by a Shane tutorial I found in a separate thread--
http://www.proapptips.com/proapptipsvideotutorials/194F4DC2-ACBB-4DD6-A1D0-F46D7 D8DCAFC/53B46BA3-E23E-4ACD-888F-1E931224596B.html
--it broadened my understanding of setups and sequences. Thanks, all.

My outlook will not open yet all other microsoft packages will. When I click on the icon, the 'o' logo will come up for a split second but will not open the package - need to receive emails asap!

My outlook will not open yet all other microsoft packages will. When I click on the icon, the 'o' logo will come up for a split second but will not open the package - need to receive emails asap!

You're very welcome!
I meant holding the "option" (or "alt") key on your keyboard as you click the Outlook icon on the Dock, and continuing to hold it until you see the Microsoft Database Utility come up. Alternatively, you can open the utility by navigating to Applications/Microsoft Office 2011/Office and then double-clicking the Microsoft Database Utility app.
When you rebuild your database using that program, a backup copy of your original database (containing your account info, contacts, mail, calendars, etc) will be created. As a security precaution, you should also ensure you have a backup of your database (which you can find by going to Documents/Microsoft User Data/Office 2011 Identities/ and copying the contents of that folder onto an external drive).

I need to recover all my notes from Ghostwriter. When I double click the icon nothing happens. I am sick to my stomach! Can anyone help me?

i need to recover all my notes from Ghostwriter. When I double click the icon nothing happens. I am sick to my stomach! Can anyone help me?

Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
Call Apple Care and see if your device is still under warranty to get it replace

Ok, i am not terribly familiar with the program premiere elements 12 as of yet, i am having some difficulty at times, current issues...when in play mode, the timeline marker? hiccups backwards then forward as it plays, some of my image clips freeze and do

ok, i am not terribly familiar with the program premiere elements 12 as of yet, i am having some difficulty at times, current issues...when in play mode, the timeline marker? hiccups backwards then forward as it plays, some of my image clips freeze and don't play while the marker keeps going, this also happens when on full screen mode...what do i need to do to correct this problem...currently i am working this on my mackbook 2009. thankyou for your reply.

<moved from Downloading, Installing, Setting Up to Premiere Elements>

Anyone knows how to get the photos after IMG_9999 from iphone? :-(ps:... i got them all in my camera roll but when i connected to the computer there's nothing after IMG_9999..

anyone knows how to get the photos after IMG_9999 from iphone? :-(ps:... i got them all in my camera roll but when i connected to the computer there's nothing after IMG_9999.. many thanks :-)

They show in the camera roll, just not your computer?
Have you checked every folder that is in the DCIM folder?

Why has Apple decided that online orders for Macbook Air display and speak VO when first opened from the box? I"m guessing 1%or 2 % of your customers know what it is or want it.

Why has Apple decided that online orders for Macbook Air display and speak VO when first opened from the box? I"m guessing 1%or 2 % of your customers know what it is or want it.

You are not talking to Apple, we are just users like you. Only Apple knows that answer.

Need help , when we turn on the mac i can hear the fan and there is a picture of the world flashing for about a minute or 2 on start up . But the fan I can hear non stop ?

need help , when we turn on the mac i can hear the fan and there is a picture of the world flashing for about a minute or 2 on start up . But the fan I can hear non stop ?

A flashing question mark or globe appears when you start your Mac

Moving a clip UP or DOWN several tracks in the timeline to REVEAL additional tracks

One thing I've always wondered but never asked here is if there's a way in Premiere to drag a clip up (or down) tracks and force the timeline to scroll up with the clip? In FCP as well as in Premiere, if you drag a clip within the timeline to the left or right beyond what is currently showing on the timeline, the timeline scrolls to the left or right almost like when you drag an app on your phone from one screen to the next...go to the edge and the page scrolls with you. But in Premiere (unlike FCP), if you try to move a clip up or down to a track that's outside of what is currently showing on the timeline, the timeline does not scroll up or down to show the additional tracks. Is there a preference or another way to enable this?
Many of my projects have 8 or 9 video and audio tracks BUT usually only around 4 or 5 video and audio tracks are showing at a time. If I needed to drag a clip from track #1 to track #8 I'd have to drag it up to an open area, drop it, scroll up (or down for audio) and then drag again to the open track #8. In FCP, the timeline would scroll up or down just like it does when you force a clip all the way left or all the way to the right.
Using a shortcut to move a track up or down does not work because it overwrites everything in its path and that's not what I want to do here. I'm hoping there's a preferece or some other way to enable this in Premiere.
Thanks!

I'm not aware of any user preference for this.
But, for situations like that, you can always temporarily fullscreen the sequence with the ` key, which will give you plenty of real estate to see everything, make the move, then restore back to normal with another tap of the ` key.

I have a MacPro with 10.7.2 installed. I want to create a new partition and install 10.5. When I put in the install DVD and restart the computer, it does not restart. What can I do?

I just purchased a MacPro with 10.7.2 installed. I want to install 10.5 on a separate partition.
I created the partition with no issues, now when I put in the 10.5 install DVD and restart the computer, it does not restart.
All I get is a grey screen. no icons, no nothing. I have to shut the computer down.
I really need to do this. I plan on upgrading to FCP X, but I still need to finish some old projects that were done with FCP 7. I need the different boot drives

Mac Pro - Mid 2010
Processor 2 x 2.66 GHz 6-Core Intel Xeon
Memory 8 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB
Software Mac OS X Lion 10.7.2 (11C74)
This is a brand new machine that I just purchased from Apple. It was delivered yesterday
The old computer is an old PowerMac G5, but my OS X install disc is a retail version of 10.5.
I also tried the OS X 10.5 install disc that came with my MacBook Pro (2.6 Ghz Intel Core 2 Dual).
Same issue - nothing but a grey screen when the system tries to boot from the DVD

When saving files from the internet, why doesn't Firefox 'know' to put .jpg files in "Photos" and pdf files in "Documents"?

When saving files from the internet, why doesn't Firefox 'know' to put .jpg files in "Photos" and pdf files in "Documents"? IE always saved photos in the "Photos" file and documents in the "Documents" file. Firefox makes me choose every time. Very annoying.

How about if Firefox is programmed like IE in this ONE thing...
When saving files from internet sources, if the file ends in a typical photo extension such as .jpg, .bmp, .tif etc. it defaults to save it in your PHOTOS folder.
When saving anything like a .doc, .pdf etc. it defaults to save it to your DOCUMENTS.
You could still change it to 'desktop' if that if really where you want all your photos and documents... or some other folder that you decide, but DEFAULTS to the LOGICAL folder.
I have carpal tunnel SO bad that even typing this suggestion is painful and having to make the extra click along with moving the mouse EVERY time I want to save something is painful.
ALSO, I shouldn't need a bunch of ADDONS to accomplish this. I tried downloading one and it did nothing. The problem still exists.

The first row behind the words,Why does not be displayed?

The first row behind the words,Why does not be displayed?
The first line of why will automatically fill?
The File(IDcs6) [Link to know attack page removed by moderator]
Message was edited by: Peter Spier

Filedown has a nasty reputation in English-speaking countries - plenty of antivirus/antimalware apps block everything there by default, which is what Peter has done. It doesn't mean that your link is malicious, only that it's hosted somewhere that has been used to host malware in the past.
I'm pretty sure, Peter, that there aren't any nonbreaking spaces there, because I'd wager that there aren't any spaces there at all. It's justified text, and the reasons why it will or will not break are sometimes obscure when using composers that aren't the J composer. Chinese text is usually entirely free of spaces, except in certain circumstances, usually involving European language inserted into Chinese text. Sometimes, for reasons I don't understand, InDesign will simply treat Chinese as if it were English, and only break at spots permissible in Euro languages. That's not the case here - it obviously breaks between two Chinese glyphs, so something else is up here.
Which version of InDesign are you using? Are you keying the text directly into InDesign, or are you placing, or copying/pasting?
If you're using an English version of InDesign, I would suggest trying to save your Chinese text as raw text or RTF and File -> Place that. If you choose RTF, try to mark it with Chinese language in your RTF editor (Word?) if possible.
Is No Break applied anywhere in your text? You can check in the Story editor (Control/Command Y) to see what styles and formatting are applied.

I have Adobe Acrobat 7.0 Professional that I want to migrate to my newer laptop running Windows 7. I downloaded the file 22020134.exe to reinstall it on my new computer and I go through the hops and when I put in the Serial Number it tells me its invalid.

I have Adobe Acrobat 7.0 Professional that I want to migrate to my newer laptop running Windows 7. I downloaded the file 22020134.exe to reinstall it on my new computer and I go through the hops and when I put in the Serial Number it tells me its invalid.

22020134.exe is the file Adobe say you must download and run to instal Acrobat 7.0 Pro. I went through the process, the one described in your link, I downloaded the file, ran it, it runs well, except it tells me my serial number is invalid. Now what? Does this mean I now have to discard my Adobe Acrobat 7.0 Professional and start again with a $500 purchase? All I want to do is transfer what I have to another computer.

I am trying to download the Facebook app to my new iPad and I keep getting an error . It tells me to sign in using my existing Apple ID, which I enter, then when I put in the password I get ConnectionManager::invoke::Failed to find service connection url

the iPad is totally new to me. I can't seem to do anything with my Apple ID. As the title says, I am trying to download the Facebook app to my new iPad and I keep getting an error. It tells me to sign in using my existing Apple ID, which I enter, then when I put in the password I get ConnectionManager::invoke::Failed to find service connection url. Cancel or Retry. I have no idea what I'm doing wrong. Any help would be greatly appreciated.
I'd also love to know how to get rid of the old owner's name, which was Mike - I'm Ann

Wow, I found a solution in another thread:
I had exact same error.....
Rebooting - Failed
Logging in to iTunes - Failed
Logging into itunes Store - Failed
Logging into iTunes Genius - SUCCESS I woulnd't have thought it would make a difference but it does Then just log into the 'other' services with iTunes.
Good luck!
I still need to know how to change the name to Ann, though, Mike keeps popping up - and yes, I have changed it under Settings.....

All my HD clips need rendering when first put on the timeline -why?

Similar Messages

Maybe you are looking for