All my IPad applications aren't working, they shout down immediately when I click on them. Please help out.
My IPad applications aren't working, they shout down immediately when I click them! Please help out!
I don't fully understand what the System Reset does but I've found that it cures many ills. It's easy, quick and harmless:
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
A System Reset does not remove any apps, music, movies, etc. nor does it cause any settings to revert back to default.
Also, you might wish to download the iPad-2 User Guide. Pay special attention to page 162. Note that this Guide also applies to the iPad-1 with IOS 4.3 except for those functions that are not supported by the hardware.
http://support.apple.com/manuals/#ipad
Finally, the User Guide can be downloaded at no charge via iBooks and a less comprehensive version of the Guide is included as a Safari bookmark.
Similar Messages
-
Applications on my iMac OS 7.1 keeps shutting down immediately when I try to open.
Help! I tried repair disk in disk utilities and nothing works..Perhaps you could try this to resolve your issue: http://support.apple.com/kb/HT1564
Try booting up to Safe Boot and see if you still have this issue in "safe mode." This will help you determine if the issue is caused by 3rd part sofware, or some other type of OS corruption. -
When I open a PDF page that has links they do not open when I click on them
When I open a PDF page in Firefox 4.0 that has links, the links will not open when I click on them. If I try that in Safari, or when I had the earlier versions of FF, I had no problem. Is this just a setting issue?
That is a limitation of iOS. They will view correctly when you view them in Adobe Reader or Adobe Acrobat.
-
When I get attachments in my email, they will not open when I click on them.
When I am on the internet, videos, click-ons all open immediately. I had to go to the internet to get to your site, because when I clicked on the "Help" at the bottom of my Thunderbird account, it would not open.
In a nutshell, if I get an email from a group that says "click here for more info" or if I click the
"play arrow "on the u tube video etc. It will not open and/or play. This is only happening in my email account.Thunderbird does not play video. You need to correct software to open the file types you are being sent.
-
After upgrading, multiple applications aren't working properly
I recently upgraded from OX 10.3 to Tiger, and a lot of my applications aren't working properly. My computer is almost exactly 2 years old (I bought it in early January 2005) and otherwise has been running fine.
When I use Safari, every time a page loads a box comes up saying, "Keychain Not Found. Keychain "mcurtiss" cannot be found to store "Safari." I've tried clicking both cancel and reset to defaults, but either way it still keeps happening. I've checked under Keychains and the mcurtiss keychain is there, so I don't know what else to do to fix that.
I also have Firefox, but now that isn't working properly either. It keeps freezing and I have to Force Quit (at which point it's written in red text and says "Not Responding). This happens at least 2-3 times every time I try to use Firefox.
DVD Player is doing basically the same thing-- working very slowly or freezing-- and I have to Force Quit it as well. It also says "Not Responding" in red when this happens.
It's happened a few times with other applications, but with those three it's basically all the time. Can anyone give me any ideas of how to fix this?
Thanks!Spotlight among other things will scan the bookmarks and add them to your list of bookmarks. To tell if Spotlight is still indexing, go to its menu (the blue circle with white magnifying glass in the upper right), and see if you see anything other than Spotlight and the search field when there is nothing in the search field telling you that indexing is happening. If you search for a known file and it isn't visible in Spotlight that could indicate your Spotlight index is corrupt. To reindex Spotlight, go to Apple menu -> System Preferences -> Spotlight, and remove and add the hard drive to the Privacy section.
If you are getting errors which can't be fixed with Keychain First Aid, and the problem seems to be especially bad with Safari, it suggests that the file that manages you cookies has gotten corrupt. How full is your hard disk?
Is your data backed up? -
I updated to 6 and now all kinds of things aren't working. I can't connect to ITunes store and Apps! Halp!
Scroll bars:
Scroll direction:
Mail:
..is there a way to change back to the look of 10.6.8
OS X Mavericks: Revert to a previous OS X version -
When synching, itcomes up with an error message saying it can't find all the songs. When I check, library has songs listed but with a "!" bubble next to them. When I click on them they play. What am I doing wrong? This happens every time so I click them and it sorts them (boring with 200 odd). How can I prevent this?
Once you successfully add you iTunes library to iTunes Match, you go to Settings>iTunes & App Store on your iOS device and turn on iTunes Match. Your iTunes Match library will then appear on your iOS device.
-
Hot links no longer work. When I click on them nothing at all happens. What do I do?
Hot links no longer work. When I click on them, nothing at all happens. what do I do to fix this problem?
That is just a link to what is already on this website. I don't know what any of that stuff MEANS. Tell me what to click on in my computer, if you know. I THINK it has Windows 8.1 but don't know how to tell. I was nagged into installing 8.1 and didn't like it and tried to uninstall it but I think it is still there. The hyperlinks were still working long after that. Now, suddenly, google chrome doesn't work, hyperlinks in emails (only) don't work. I don't know how to "reset" anything. This was working fine; now it isn't. I didn't do anything different, and every time I get a message it directs me to click on a hot link and my problem is that hotlinks in my e-mails are NOT WORKING!!! HELP!!!
-
Many of the internet radio stations that I usually listen to are no longer working. When I click on them, they either get stuck in connecting or just jump to the next station below. What gives?
Same thing here. Always listened to 96.9 The Eagle but not anymore. Skipped to the next station down.
This is one of many. What's going on?
Maybe Apple can tell us!!!! -
I went on a trip and when I came back almost all my ipad apps were gone(I suspect my dad). When I went to go look at my account it was as the same as the ipad, it had none of my other games on there. How do I get my account back to how it was
I kind of ran into the same issue when I checked my purchased apps on my iPad in the iTunes store. A bunch were not there. I then looked at iTunes on my computer and again, a bunch were missing. I realized I had not synched in quite a while. Once I synched everything was ok. As the poster above said, iTunes knows you have already purchased them so you can redownload for free. However, be aware that when you do red own load you will be asked to pay again, just say ok and the next popup will say that you have already purchased the app.
Lesson I learned - synch more often. Boy, I can't wait for IOS5...... -
Can we copy a CD tutorial onto an iPad? Does it work like the MacBook Air when downloading or copying using the iMac?
So it can be .mp4 format.
If not you have to convert it.
Try import it into iTunes then sync it to your iPad.
Message was edited by: ckuan
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format -
Hi, I just downloaded a bunch of RAW files into Lightroom 5.6 and they all look like they've been put through acid. Can someone please help? TYVM!
Jim and Rob, thank you for taking your time to respond. I have a mac & a pc with 4 gigs of RAM in each. I originally experienced the problem on my mac and afterwards the same thing happened on the pc. I shoot with a canon 5d mark iii and never had this problem before, but what I'm realizing is that I'm running out of space on both the mac & the pc. After an afternoon of shooting today, I filled up a 32-gig card, so my TB hard drives are filling up ridiculously fast. I need to drop some load off both drives and reboot. Hope this will resolve the issue as I really don't think it's a canon-LR problem (I'm using the most updated 5.6 version). Again, thanks for your input. I'll keep you posted.
-
My iPod camera won't work. The shutter doesn't open at all. I backed up and restored my iPod but it didn't make it work. Now I'm so mad and confused. Please help.
If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar -
I have updated my Imac to Mavericks and now my parallells won't work and I have reinstalled as per the instructions. Please help as all my data is on a hardrive that is formatted for PC.
Yes I just discovered that this morning but I have purchased another external harddrive and formatted it for both and am in the process of transferring the files across it and then I will erase the old harddrive and reformat it so I can use it.
I have learnt to format harddrives from this experience but am happy to see the back of parallells.
Thank you for your help though it is much appreciated. -
Photos show up as thumbnail but when I click on them they will not display
Photos show up as thumnails but when I click on them they will not display. I get a exclamation mark in a dotted line box
Hylan:
That occurs when the library has lost the link to the original file. This is a result of a damaged library database file, Library6.iPhoto. You can try rebuilding the library from within iPhoto to see if you can recover the photos by launching iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options. However, it's iffy.
You can rebuild the library with iPhoto Library Manager as it create a new library, leaving the original one intact, by reading the AlbumData.xml file and copying what it needs. You will be able to recover the photos, albums, keywords, titles and comments. However, books, slideshows, and calendars will not be recovered. Here's how:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 -Download iPhoto Library Manager and launch.
2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: It may take some time to create the new library if you have a lot of photos. Report back on how long it took and how many photos you have in the library so we can give other users an idea of how long it may take.
It that doesn't work you'll have to start over with a new library and import the Originals folder from the old library as follows:
Creating a new library while preserving the Events from the original library.
Move the existing library folder to the desktop.
Open the library package like this.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Maybe you are looking for
-
Now i want to burn it to a dvd using a flashdrive and burning it on another PC that has a burner. Does anyone know how i can do this? My macbook air HAS IDVD....
-
W_DAY_D is not getting Loaded with Enterprise WEEK or FISCAL week informati
HI Experts, We have OBI Application 7.9.6.1 (FIN,SCM,PSA analytics application). We are using Oracle EBS 12.0.6 as the source system. we are using the Enteprise Calendar in EBS to load the W_DAY_D,but the W_DAY_D is not getting Loaded with Enterprise
-
Help! SQL Server to Oracle 10.1.0.2
Hello! I need your help. I need to migrate SQL Server 2000 to Oracle 10g on HP-UX. I read the SQL Developer documentation, but it only seems to be available for Windows, MacOS, and Linux. Is there one available for Unix? Thank you in advance, si
-
List of Modified and New objects between two consecutive TRs/ TOCs
Hi gurus, My requirement is to create a Z program that will give me a report of the objects that have been modified or newly created between two Transport Requests or Two TOCs containing the objects. I had created the program, but facing these diffic
-
QA10 User Exit to run addational code for Material Backflush
Does anyone know if there is a User Exit for QA10 Automatic Usage Decision that will allow you to tack on additional code to complete a material backflush. I have a batchjob that runs every 5 minutes which fires off a variant to evaluate the Inspect