All my itunes files are visible but none will play. Error message file cannot be found

All my track file names and other details are visible in Itunes but none will play. single click on a track and an exclamation mark embeds at the front of the track name bar double click or click play and the error message I get says, "The song could not be used because the original file could not be found. Would you like to locate it? A search doesn't find it.
This applys to every track on itunes but music files in the music folder in Finder still play. Can anyone Help please

Is it possible that you moved the iTunes Media folder using Finder (or renamed something along the path)? The reason this happened is because iTunes cannot find the song files where they were previously located. However, you know where they are located (in the "music folder," so you can find the files using Finder and play them.
That you need to do is to put the files back where they were previously located. If you need to change the location of the files, you can use iTunes to move the files, so that iTunes can keep track of their new locations. This article provides instructions
http://support.apple.com/kb/HT1449

Similar Messages

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

answered in your other thread LR 4 suddenly no longer recognizes files.

When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

Indesign cc files not saving but not giving an error message

Indesign CC files not saving but not giving an error message
I have all my restaurant menus in Indesign cc and when emailing them to myself, after changing them to print them from a different computer I experience that the files are not the most updated version.
Can anybody suggest a solution?
Thanks
Janine

Ask in the ID forum and provide at least some useful info like system specs, what's contained in the files, where they are stored...
Mylenium

For the first time, I'm trying to use adobe premiere elements10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or

For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone

mike frischenmeyer
What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
know the details and troubleshoot to determined what caused the problem.
1. Can you open a new project?
2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
for that project?
3. Please review the Adobe document on troubleshooting damaged projects.
Troubleshoot damaged projects | Adobe Premiere Elements
4. What are the steps that you are using to reopen this saved closed project.
a. File Menu/Open Project/Name of Project
b. Other
Please review and consider and then we can decide what next based on your further details and results..
Thank you.
ATR

I am trying to re-install Photoshop CS6. The files have downloaded but I get and error message that the Adobe Support Advisor is required to determine what the installation probIem is. I click on the link that says "get the Support Advisor here only to be

I am trying to re-install Photoshop CS6. The files have downloaded but I get and error message that the Adobe Support Advisor is required to determine what the installation probIem is. I click on the link that says "get the Support Advisor here only to be told the Support Advisor no longer exists!! A blind loop. I need to have Photoshop CS6 installed...what do I do from here??

The CC Cleaner Tool assumes the Akamai Download Manager is activated and it has not. It seems to be the missing file that triggers the error message. \in a previous re-install I was prompted to download & install the Akamai Download Manger, but not this time. Is there somewhere on the Adobe website that I can download it??

I have an iphone 4 jammed in MDU mode, I conect to itunes and asked to restore, it went through all the steps and nearly completed it gives me an error message saying cannot be restored error -1. Can anybody help me how to restore my iphone

I have an iphone 4 started the problem saying no service, then when restarting asked to connect to itunes and became jammed in MDU mode, I connect to itunes and clicked on restore, it went through all the steps and nearly completed it gives me an error message saying cannot be restored error -1. Can anybody help me how to restore my iphone. or what to do next, some reseller asked me to go the shop where I bought to replace it for me as this error cannot be restored by any shop. It has to be returned to apple and get it replaced. The warranty already expired and don't know what to do.
Please help

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694#error1

I have tried to download ITunes 11on Windows 7 but I keep getting error message 5 telling me it did not install correctly and to install again. Can anyone help?

I have tried to download ITunes 11on Windows 7 but I keep getting error message 5 telling me it did not install correctly and to install again. Can anyone help?

HI there,
I would recommend taking a look at the troubleshooting steps found in the artilce below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W

I have had an eMac for a few years. I don't know any of the specs. Every time I try to download or install a new version of itunes or OS I get any number of error messages and cannot complete. Help!!!!

I have had an eMac for a few years. I don't know any of the specs. Every time I try to download or install a new version of itunes or OS I get any number of error messages and cannot complete. Help!!!!

It's best to start with figuring out your eMac model and OS in order to answer the question. This article will help you determine your model:
How to locate the serial number and identify your model
And to get the version of Mac OS that's installed:
From the Apple Menu at the left end of your menu bar, select "About this Mac..."
In the resulting Window, you can see the Mac OS version just under the big "Mac OS X":
If the eMac is older and you have never upgraded the system software, it's possible that your OS version is too old to run the current iTunes. The current version requires OS 10.5 (Leopard)or higher, which is a pay-for system upgrade.

Some old downloaded itunes will now not play the files are there but just wont play is there a fix

Some old downloaded itunes movies will no longer play. The files are in the itunes movies folder . Any Ideas dont want to have to redownload and pay again
any ideas ?

You mean files are there on device or in iTunes? Do they play in iTunes?

While extracting file during restore, device disappear from iTunes; then error message "device cannot be found" pop up

After failing to update iphone OS, now iphone is in restore mode
Device Manager recognize USB is connected to iphone with Location: Location 0 (Apple Mobile device (recovery mode))
IPhone in "connect to itunes" screen
After connect to itunes, message "itunes has detected iphone in recovery mode. You must restore this iphone before it can be used with itunes." appear.
In Device -> iphone screen, after clicking "Restore" button, itunes status become "Extracting software..."
During extracting software process, iPhone change from "connect to itunes" screen to just "apple logo", then go back to "connect to itunes" screen; but at the same time device-iphone disappear from itunes; once itunes complete extracting software, error message comes out "The iphone "iphone" could not be restored. The device cannot be found"
Tried again few times with all USB device removed & turn off all the anti-virus software and all other non window / non-apple softwares; but same thing happened.
so now I'm stuck.... please help.

after reading loads of forum, I didn't find anyone with the exact issue as mine. But I've followed some of the restore issue solution and now I've fixed my phone. Yeah! maybe not all the steps are necessary, but here was what I've done to fix it:
1.     update itunes
2.     Ensure Apple Mobile device driver is updated and work (i.e. iphones is detected in device manager)
3.     run "msconfig", ensure all other non microsoft / non apple softwares are off
          - Services: only enable all microsoft services, apple mobile device and bonjour service
          - Startup: only enable QTTask & iTunesHelper
4.    Restart computer
5     turn on itunes
6.    connect iphones via USB.
7.     itunes show iphone in device column, but iphone still stay in "connect to itunes" screen
8.     Hold Sleep button + Home button until the screen goes dark (iphone disappear from itunes device column at the same time), then just keep holding the home button (without holding the sleep button)
9.     first time, though itunes showa iphone in the device column again, but iphone screen go from apple icon straight to "connect to itunes" screen and stay there again.
10.     I repeat step 8, this time though itunes show iphone in the device column again, but the iphone screen stay dark showing nothing (instead of showing "connect to iTunes" screen)
11.     then I click restore in itunes, this time it manages to finish extracting software without iphone restarting itself during the process; itunes find the iphone and complete the restore.
12.     As I do backup all the time, now I just need to sync all the files / setting back to iphone, everything back to normal again.
still not sure what happened to my phone, but now it's fix =>

ITunes won't open but there's no error message...

...it just won't open.
I just updated to iTunes 7 because of an issue I'm trying to correct with my iPod. I believe I've had this problem with iTunes 7 before, and the last time I ended up reverting to iTunes 6.
When I manage to successfully install iTunes 7, I click on the desktop icon to open it and it looks like it's about to load, but then nothing happens. So I try opening it from the start ment and still nothing. Then I try opening it by trying to play an mp3 through it, and still nothing.
I really hope someone can help me with this, because if I end up needing a new iPod I'm gonna need the newest iTunes for it, I'm sure.

Help! This is happening to me too, and I can't find the fix, if there is one. I just downloaded the newest update (wish I hadn't). It took a few tries to open it, but it worked. The second time, it didn't open. NO error message. I've tried every way of opening a program, and nothing happens.
(1) do you have Norton Internet Security 2005 installed on the PC?
NO NORTON INTERNET SECURITY 2006
(2) try launching your QuickTime. does it:
(a) launch perfectly fine?
(b) fail to launch with an error message? (if so, what does it say?)
(c) exhibit other peculiar behavior? (if so, could you describe it for us?)
IT SAYS IT IS LOADING... FOR OVER 15 MINUTES
(3) reboot the PC. bring up your Task Manager, and click on the "Processes" tab. now try to launch itunes again.
does an "itunes.exe" process appear in the Processes tab? if so, does it persist in there or does it disappear after a few seconds?
ITUNES.EXE DOES SHOW UP IN THE PROCESSES TAB AND STAYS THERE
THE ONLY OTHER ODD THING IN THE PAST YEAR, IS THAT 2 WEEKS AGO, A WINDOW CAME UP ASKING IF I WANTED TO RECONFIGURE WHAT STARTS WHEN I START WINDOWS. I CHOSE THE WRONG THING BECAUSE NOW THERE ARE TONS OF EXTRANEOUS PROGRAMS RUNNING ON MY COMPUTER.
HELP!!??!!

HT1349 I have installed and uninstalled iTunes on multiple occasions, but keep getting the error message that "Apple Application Support is required to run iTunes ..... Error 2 (Windows Error 2)". Can't find any useful solution. Can anyone help? Pleeee

I have instlled and uninstalled iTunes on multiple occasions but iTunes fails to start with message "Apple Application support is required to run iTunes .......... Error 2 (Windows error 2)". Most most frustrating. Can anyone help, pleeeeeeease!!

iTunes "Apple Application Support is required... Error 2" and possible fix.
Hi Redgilly (and others).
I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
Problems:
The initial error during the installation of iTunes was:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
The error (after installing iTunes) when trying to run iTunes was:
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
http://support.microsoft.com/kb/2688946
This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Note: The installation of VC++ rolls back when it fails.
Solution:
Through this error I found this MSKB article:
http://support.microsoft.com/kb/946414
The Automated MS "Fix It" msi package didn’t work.
Note: Please backup your registry first (see the above MSKB article for instructions).
I opened the registry and (as instructed in the MSKB article) deleted the following keys:
HKEY_LOCAL_MACHINE\COMPONENTS\
PendingXmlIdentifier
NextQueueEntryIndex
AdvancedInstallersNeedResolving
Reboot and reinstall iTunes.
I hope this helps.

I have windows 8, 64 bit. I am trying to install ITunes 64 bit installer, but keep getting an error message that says a .DLL file is missing. How can I fix this?

After installing, whenever i try to open the application, it keeps popping up that some or the other .dll file is missing.
When I install that particular .dll file and then again try to re open, it says that someother file is missing. It keeps
coming all the time.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Windows Backup fails to complete and System shows 29 Restore Points all titled "System Image restore point" but none will work.

Problems both seemed to appear about the same time and may be related.
Had backups on an external drive prior to the problem and appeared to be working. I have since cleaned the external drive in an attempt to start a new backup series but it continues to stop and report backup has failed.
The System restore was working fine and one day it had changed all the existing Restore Points to "System Image restore point"
but still showed all the different dates. In the System Properties window it indicates that there are 0 bytes in "current usages",
which I assume they are all empty but I can't create any new ones. I get Error code 0x80042308.
I have tried the Clean Boot with no results. I use MS Security Essentials for virus protection.
I have no other symptoms or problems on the PC.
About ready for a Recovery and start all over.
George M1

Hi,
Your first step should be to run chkdsk /r /f on all the drives in that computer. Shadow copy errors are often caused by disk problems (usually minor) which chkdsk will find and correct.
Also, this issue can be caused that VSS dlls are corrupted.
Re-install the VSS dlls by following these steps:
a. Using command prompt, CD to the WINDOWS\system32 directory
b. Stop the Volume Shadow Copy service by executing the command "net stop vss"
c. Register the following DLLs and services by executing these commands:
regsvr32 ole32.dll
regsvr32 vss_ps.dll
Vssvc /Register
regsvr32 /i swprv.dll
regsvr32 /i eventcls.dll
regsvr32 es.dll
regsvr32 stdprov.dll
regsvr32 vssui.dll
regsvr32 msxml.dll
regsvr32 msxml3.dll
regsvr32 msxml4.dll
Hope these could be helpful.
Kate Li
TechNet Community Support

All my itunes files are visible but none will play. Error message file cannot be found

Similar Messages

Maybe you are looking for