All my phone calls are going to voicemail
My do not disturb is not on and calls divert directly to voicemail without there being a divert on. please help as cannot make outgoing calls again.
First try simply turning your iPhone off completely (press and hold the sleep button until your get the 'Slide to Power Off' message on screen) and then turn it back on again after a few minutes.
You will find that fixes many issues on many different types of handsets.
If that doesn't work then try a network reset by going to Settings>General>Reset>Reset Network Settings follow the prompts and then your iPhone will reboot automatically. You will need to re-enter any WiFi passwords but no other data will be lost
Similar Messages
-
Incoming calls are going directly to Voicemail, Iphone 5S
I switched phones from an Iphone 4 to this Iphone 5S and my incoming calls are going directly to voice-mail and not ringing the phone. The only app I downloaded that is different from my Iphone 4 is the GroupMe app, but I don't know if that is necessarily the cause. Anyone have a suggestion? thanks
Hi, I don't know if this info will help many, but for a few it may. I had this problem over the weekend. Called Tech Support 2x, they tried everything, resetting,, *73, *228, *900 , there were no "do not disturb" settings, etc. They prepared a work ticket for the next level of help.
Meanwhile, I couldn't figure out what changed all of a sudden. I knew I had no calls coming in after accessing my voicemail. I looked at my recent calls and noticed i had dialed a *83 prior to the voicemail *86. Fat thumbs. I remember years ago, having the features of *83 for do not disturb and *84 to stop the feature. Just for giggles, i dialed *84, tried from another phone calling my number and WHOOLA, it came thru.
If anyone has these issues, try the *73 first. But just for the heck of it, do *84 as well. Takes half a second. If those dont' work, then call Tech Support. I wanted to share to help at least some of you as I understand the frustration of not having incoming calls. I even called Tech Support and shared the info. As this was not an option given to me from Tech Support, but then again, i don't believe *83 or *84 is offered anymore. I just dated myself, but hope it helps others ! -
I have a Galaxy S3 and love this phone but here at my new home which has absolutely no trees of bushes blocking anything, my phone calls are dropped ALL THE TIME and it's driving me crazy. Verizon finally said that they would come out and boost the signal but haven't seen anyone in two weeks. I have called Verizon tech help for one year to get help with this, either trade phone or something. I am so frustrated! I picked Verizon for the clear calls and coverage inside hospitals and buildings but it's been terrible. I have had three of these phones replaced. I need a different model like the S4 or the S5 I think cause it's something in this model.
Verizon is quickly becoming the worst cell phone company out there. To read all of these pleas from your loyal customers is just so sad and pitiful. You need to be sued for your data overage charges that you are intentionally imploding on your customers. They have pleaded, very intelligently, with you to do something to fix the issue and you willingly have NOT. As is with my reception issue that I was promised a signal booster for two months ago, so is this issue with the data. You don't follow up and solve the issues. Therefore the courts will find you fraudulent. When I was promised by your super tech that I needed a signal booster and he was sending it out overnight at no charge to me, I was relieved that it would finally be taken care of so I wouldn't lose faith with Verizon. Well, that was two months ago now with no record of it ever being ordered or on my file anywhere. I have since called three more times with hours of conversations about that issue and two more techs have told me they were sending me a signal booster with no follow up what so ever. WOW! That's pitiful! You may not care now, oh but you will later when you lose lots of money and business.
-
No calls are going through or coming in, also my sms/mms does not work the only thing that seems to be working is mobile internet anyone help???
When I try calling someone it beeps twice and says 'call failed' also when someone tries calling me it does not come through. Also SMS/MMS cannot be sent or recieved. Only mobile internet is working
iPhone 5s
ANYONE HELP???Restart your phone by holding the power and home button until the Apple logo appears. If that does not solve the issue contact your cell provider so they can resolve the issue.
-
Iphone question
my my incoming phone calls are being shared with my wife's IPhone as well, both phones are getting the same call, how do I correct?
thanksThat is a new feature described in Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off.
You may also want to look into using separate Apple IDs for you and your wife. That is now more flexible with new Family Sharing features: http://www.apple.com/ios/whats-new/family-sharing/ -
Downloading and installing the iOS5.0.1 Following problems occured: with my iPhone 4s: Phone calls are dropping out in UAE, how to solve the problem?
You're not speaking to Apple on in this forum, nor will someone from Apple see this post. We are just users like you and I.
Have you tried to restore or reset your phone?
Or contact your carrier in re: to your sim card -
Most of my music--the VAST majority--is in iTunes Music, but all the new songs are going into iTunes Media, which is new, I think, since 10.5.1.
The missing file thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
At guess you've used a different profile name. Files inside the media folder have survied the transfer, but those outside are expected to be on the same absolute file paths, but no longer are.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes.
tt2 -
All my incoming calls are coming up as unknown, even though they are not blocked?
All my incoming calls are coming up as unknown, even though they are not blocked? Any help much appreciated!
We didnt Still happens to some numbers!
-
i tried to update my ipad to 7.1.2, and i tried updating it and know its telling me to connect to itunes but i a at a different computer and all of my ictures are going to get deletd and i dont want that.
Hi Kevin Gauthereau,
Welcome to the Support Communities! If you don't have access to the original computer that you use to sync to iTunes, you can backup your iPad to iCloud and update it wirelessly. This article will explain how:
iCloud: Back up your iOS device to iCloud
http://support.apple.com/kb/PH12520
You can import your pictures to your computer at any time as a second backup. Here's how:
iOS: Import personal photos and videos from iOS devices to your computer
http://support.apple.com/kb/ht4083
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Cheers,
- Judy -
BB reject all incoming phone calls
Hey
I have a problem my Blackberry started to rejecting all incoming phone calls from numbers which i dont have in my phone book. Any solution ?Open Settings then tap FaceTime and turn iPhone Cellular Calls to off.
-
My daughter's phone calls are ringing on my phone... how do I fix this?
Hello... I am trying to figure out why my daughters phone call are ringing to my phone and how to fix it. Anyone have this happen before and do you have any suggestions>
Try looking at this if you are sharing the same Apple ID. http://osxdaily.com/2014/09/29/stop-other-devices-ringing-iphone-call/
Also consider setting up seperate Apple IDs and using Family Sharing instead. -
I have spent hours on the phone with Apple and AT&T. I went thought reset, on/off, etc, etc with both companies to no avail. Each company pointed fingers at the other....as being the source of the problem.
Problems: Suddenly ALL incoming calls were going directly to VM with no signal I missed calls and/or had VM. I was also unable to receive all Text Messages...Oddly, I could send text messages to anyone (even non-apple users but I could not receive their responses)........then I when I got home I started receiving text messages from other apples users ONLY. I assume now - iMessage kicked in and I could text (send/receive) other iPhone/iPad/iTouch users ONLY. ....yes, I could still (send) text messages to my husband's blackberry (he received my messages fine) but my phone would NOT receive his text respones.
Finally, I googled the problem and found this community where other people have had the exact same problems! One person said he "turned off 3 G" which was the solution for him....so I did the same and VIOLA! My problem solved! Nevermind the fact that I pay for 3G and cannot use it....so here's my question, if 3G is the problem on my phone is this an APPLE issue or a NETWORK problem? Do I purchase a new phone and slip in my same SIM card and hope the same does not occur or do I get a whole new SIM card and phone? What is the long term resolution to this problem?
I am happy however to find that my problem is NOT an isolated incident and wish Apple or AT&T had told me this is not so uncommon because I thought (based on the baffled response from Apple) that this has never occurred before. Where is Steve Jobs when we need him?jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport -
All off-silte call directly goes to Auto Attendant
Hello everyone,
I have an issue with UC520. There is one PSTN line connected to the voice port 0/2/0, All dial out works fine, All off-site calls goes directley to the Auto Attendant, however, interal dial-in works fine, I mean user can dial internal extension properly but not from offsite to insite.
I was wondering if any one can help me.
Here is the partal UC configuration:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.01.13 13:51:51 =~=~=~=~=~=~=~=~=~=~=~=
sh run
Building configuration...
Current configuration : 31685 bytes
dot11 syslog
dot11 ssid uc520-data
vlan 1
authentication open
dot11 ssid uc520-voice
vlan 100
authentication open
ip source-route
ip cef
ip dhcp relay information trust-all
ip dhcp excluded-address 10.1.1.1 10.1.1.10
ip dhcp excluded-address 192.168.10.1 192.168.10.10
ip dhcp pool phone
network 10.1.1.0 255.255.255.0
default-router 10.1.1.1
option 150 ip 10.1.1.1
ip dhcp pool data
import all
network 192.168.10.0 255.255.255.0
default-router 192.168.10.1
ip name-server 63.203.35.55
ip inspect WAAS flush-timeout 10
ip inspect name SDM_LOW dns
ip inspect name SDM_LOW ftp
ip inspect name SDM_LOW h323
ip inspect name SDM_LOW https
ip inspect name SDM_LOW icmp
ip inspect name SDM_LOW imap
ip inspect name SDM_LOW pop3
ip inspect name SDM_LOW netshow
ip inspect name SDM_LOW rcmd
ip inspect name SDM_LOW realaudio
ip inspect name SDM_LOW rtsp
ip inspect name SDM_LOW esmtp
ip inspect name SDM_LOW sqlnet
ip inspect name SDM_LOW streamworks
ip inspect name SDM_LOW tftp
ip inspect name SDM_LOW tcp
ip inspect name SDM_LOW udp router-traffic
ip inspect name SDM_LOW vdolive
no ipv6 cef
multilink bundle-name authenticated
stcapp ccm-group 1
stcapp
stcapp feature access-code
stcapp supplementary-services
port 0/0/0
fallback-dn 301
port 0/0/1
fallback-dn 302
port 0/0/2
fallback-dn 303
port 0/0/3
fallback-dn 304
trunk group ALL_BRI
translation-profile outgoing PROFILE_ALL_BRI
voice call send-alert
voice rtp send-recv
voice service voip
sip
no update-callerid
voice class codec 1
codec preference 2 g729r8
voice class custom-cptone CCAjointone
dualtone conference
frequency 600 900
cadence 300 150 300 100 300 50
voice class custom-cptone CCAleavetone
dualtone conference
frequency 400 800
cadence 400 50 200 50 200 50
voice register global
max-dn 56
max-pool 14
voice translation-rule 4
rule 15 /^...$/ /0354434848/
voice translation-rule 1000
rule 1 /.*/ //
voice translation-rule 1111
voice translation-rule 1112
rule 1 /^0/ /*/
voice translation-rule 2222
voice translation-profile CALLER_ID_TRANSLATION_PROFILE
translate calling 1111
voice translation-profile CallBlocking
translate called 2222
voice translation-profile OUTGOING_TRANSLATION_PROFILE
translate called 1112
voice translation-profile PROFILE_ALL_BRI
translate calling 4
voice translation-profile nondialable
translate called 1000
voice-card 0
dspfarm
dsp services dspfarm
license udi pid UC520W-8U-2BRI-K9 sn FHK131827A2
archive
log config
logging enable
logging size 600
hidekeys
username cisco privilege 15 secret 5 $1$TC0B$LXMORw4u1vQpD/2eJdN4W1
username admin privilege 15 password 0 admin
username parham privilege 15 password 0 parham
ip tftp source-interface Loopback0
translation-rule 22
bridge irb
interface Loopback0
description $FW_INSIDE$
ip address 10.1.10.2 255.255.255.252
ip access-group 101 in
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/0
description $FW_OUTSIDE$
ip address dhcp
ip access-group 104 in
ip nat outside
ip inspect SDM_LOW out
ip virtual-reassembly in
duplex auto
speed auto
interface Integrated-Service-Engine0/0
description cue is initialized with default IMAP group
ip unnumbered Loopback0
ip nat inside
ip virtual-reassembly in
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface FastEthernet0/1/0
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/1
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/2
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/3
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/4
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/5
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/6
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/7
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/8
switchport mode trunk
no ip address
macro description cisco-switch
interface BRI0/1/0
no ip address
isdn point-to-point-setup
isdn incoming-voice voice
isdn sending-complete
interface BRI0/1/1
no ip address
isdn point-to-point-setup
isdn incoming-voice voice
isdn sending-complete
interface Dot11Radio0/5/0
no ip address
ssid uc520-data
ssid uc520-voice
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
interface Dot11Radio0/5/0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0/5/0.100
encapsulation dot1Q 100
bridge-group 100
bridge-group 100 subscriber-loop-control
bridge-group 100 spanning-disabled
bridge-group 100 block-unknown-source
no bridge-group 100 source-learning
no bridge-group 100 unicast-flooding
interface Vlan1
no ip address
bridge-group 1
bridge-group 1 spanning-disabled
interface Vlan100
no ip address
bridge-group 100
bridge-group 100 spanning-disabled
interface BVI1
description $FW_INSIDE$
ip address 192.168.10.1 255.255.255.0
ip access-group 102 in
ip nat inside
ip virtual-reassembly in
interface BVI100
description $FW_INSIDE$
ip address 10.1.1.1 255.255.255.0
ip access-group 103 in
ip nat inside
ip virtual-reassembly in
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/gui
ip nat inside source list 1 interface FastEthernet0/0 overload
ip route 10.1.10.1 255.255.255.255 Integrated-Service-Engine0/0
control-plane
bridge 1 route ip
bridge 100 route ip
voice-port 0/0/0
cptone AU
voice-port 0/0/1
cptone AU
voice-port 0/0/2
cptone AU
voice-port 0/0/3
cptone AU
voice-port 0/1/0
cptone AU
voice-port 0/1/1
cptone AU
voice-port 0/2/0
translate calling 1112
connection plar opx 398
description Configured by CCA 4 FXO-0/2/0-Custom-AA
caller-id enable
voice-port 0/2/1
connection plar opx 398
description Configured by CCA 4 FXO-0/2/1-Custom-AA
caller-id enable
voice-port 0/2/2
connection plar opx 398
description Configured by CCA 4 FXO-0/2/2-Custom-AA
caller-id enable
voice-port 0/2/3
connection plar opx 398
description Configured by CCA 4 FXO-0/2/3-Custom-AA
caller-id enable
voice-port 0/4/0
auto-cut-through
signal immediate
input gain auto-control -15
description Music On Hold Port
sccp local Loopback0
sccp ccm 10.1.1.1 identifier 1 version 4.0
sccp
sccp ccm group 1
associate ccm 1 priority 1
associate profile 1 register confprof1
dspfarm profile 1 conference
description DO NOT MODIFY, active CCA conference profile - CCA2.0 codec711
codec g711alaw
codec g711ulaw
maximum conference-participants 32
maximum sessions 2
associate application SCCP
dial-peer voice 2000 voip
description ** cue voicemail pilot number **
destination-pattern 300
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
no vad
dial-peer voice 2001 voip
description ** cue auto attendant number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 398
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
no vad
dial-peer voice 2012 voip
description ** cue prompt manager number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 739
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
no vad
dial-peer voice 90 pots
description AU-Mobile
preference 1
destination-pattern 04........
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 68 pots
description NSW Number
preference 1
destination-pattern 02........
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 69 pots
description TAS Number
preference 1
destination-pattern 03........
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 70 pots
description WA-SA-NT number
preference 1
destination-pattern 08........
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 72 pots
description QA-number
preference 1
destination-pattern 07........
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 74 pots
description International number
preference 1
destination-pattern 0011T
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 30 pots
description Australia-1800
preference 1
destination-pattern 1800......
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 31 pots
description Australia-1300
preference 1
destination-pattern 1300......
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 32 pots
description 13 Australia
preference 5
destination-pattern 13....
port 0/2/0
forward-digits all
dial-peer voice 67 pots
description mel-number
preference 1
destination-pattern 9.......
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 75 pots
description mel-Number
preference 1
destination-pattern 8.......
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 76 pots
description VIC number
preference 1
destination-pattern 5.......
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 33 pots
description Emergency NUmber
preference 1
destination-pattern 0000
port 0/2/0
forward-digits all
no sip-register
no dial-peer outbound status-check pots
telephony-service
sdspfarm conference mute-on 111 mute-off 222
sdspfarm units 5
sdspfarm tag 1 confprof1
conference hardware
video
max-ephones 14
max-dn 56
ip source-address 10.1.1.1 port 2000
max-redirect 20
auto assign 1 to 1 type bri
calling-number initiator
service phone videoCapability 1
service phone webAccess 0
service dnis overlay
service dnis dir-lookup
timeouts interdigit 7
system message UC520
url services http://10.1.10.1/voiceview/common/login.do
url authentication http://10.1.10.1/CCMCIP/authenticate.asp
load 7906 SCCP11.9-2-1S
load 7911 SCCP11.9-2-1S
load 7931 SCCP31.9-1-1SR1S
load 7960-7940 P00308010200
load 521G-524G cp524g-8-1-17
time-zone 48
date-format dd-mm-yy
voicemail 300
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
hunt-group logout HLog
multicast moh 239.10.16.16 port 2000
web admin system name cisco secret 5 $1$NPt8$6I2moMN32fQoz083VCFm90
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern 0.T
transfer-pattern .T
secondary-dialtone 0
night-service day Sun 17:00 09:00
night-service day Mon 17:00 09:00
night-service day Tue 17:00 09:00
night-service day Wed 17:00 09:00
night-service day Thu 17:00 09:00
night-service day Fri 17:00 09:00
night-service day Sat 17:00 09:00
create cnf-files version-stamp 7960 Dec 23 2013 10:55:20
ephone-template 15
softkeys remote-in-use Newcall
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd HLog Login
softkeys seized Cfwdall Endcall Redial Pickup Meetme Gpickup Callback
softkeys connected Hold Endcall Trnsfer Confrn ConfList RmLstC Acct Park Select Join
button-layout 7931 2
ephone-template 16
softkeys remote-in-use Newcall
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd HLog Login
softkeys seized Cfwdall Endcall Redial Pickup Meetme Gpickup Callback
softkeys connected Hold Endcall Trnsfer Confrn ConfList RmLstC Acct Park Select Join
ephone-template 17
softkeys remote-in-use CBarge Newcall
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd HLog Login
softkeys seized Cfwdall Endcall Redial Pickup Meetme Gpickup Callback
softkeys connected Hold Endcall Trnsfer Confrn ConfList RmLstC Acct Park Select Join
ephone-template 18
softkeys remote-in-use CBarge Newcall
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd HLog Login
softkeys seized Cfwdall Endcall Redial Pickup Meetme Gpickup Callback
softkeys connected Hold Endcall Trnsfer Confrn ConfList RmLstC Acct Park Select Join
button-layout 7931 2
ephone-dn 5 dual-line
number 301 no-reg primary
label 301
description PhoneA Analog
name PhoneA Analog
ephone-dn 6 dual-line
number 302 no-reg primary
label 302
description PhoneB Analog
name PhoneB Analog
ephone-dn 7 dual-line
number 303 no-reg primary
label 303
description PhoneC Analog
name PhoneC Analog
ephone-dn 8 dual-line
number 304 no-reg primary
label 304
description PhoneD Analog
name PhoneD Analog
ephone-dn 9
number BCD no-reg primary
description MoH
moh out-call ABC
ephone-dn 10 dual-line
number 201 no-reg primary
pickup-group 1
label 201
description Extension 201
name Receptionist Receptionist
mobility
call-forward busy 300
call-forward noan 300 timeout 20
ephone-dn 11 dual-line
number 207 no-reg primary
label 207
description Extension 207
name None None
ephone-dn 12 dual-line
call-waiting ring
number 203 no-reg primary
pickup-group 1
label 203
description Extension 203
name Peter Steve
call-forward busy 300
call-forward noan 300 timeout 15
huntstop channel
ephone-dn 13 dual-line
call-waiting ring
number 204 no-reg primary
pickup-group 1
label 204
description Extension 204
name Tim OConnor
call-forward busy 300
call-forward noan 300 timeout 20
huntstop channel
ephone-dn 14 dual-line
number 205 no-reg primary
pickup-group 1
label 205
description 205
name 205
ephone-dn 15 dual-line
number 206 no-reg primary
pickup-group 1
label 206
description 206
name 206
ephone-dn 16 dual-line
call-waiting ring
number 202 no-reg primary
pickup-group 1
label 202
description Extension 202
name David Holmes
call-forward busy 300
call-forward noan 300 timeout 15
huntstop channel
ephone-dn 17 dual-line
number 208 no-reg primary
label 208
description 208
name 208
ephone-dn 18 dual-line
number 209 no-reg primary
label 209
description 209
name 209
ephone-dn 19 dual-line
number 210 no-reg primary
label 210
description 210
name 210
ephone-dn 43 octo-line
number 771 no-reg primary
conference meetme
preference 3
ephone-dn 44 octo-line
number 771 no-reg primary
conference meetme
preference 2
no huntstop
ephone-dn 45 octo-line
number 771 no-reg primary
conference meetme
preference 1
no huntstop
ephone-dn 46 octo-line
number 771 no-reg primary
conference meetme
no huntstop
ephone-dn 49 octo-line
number C001 no-reg primary
conference ad-hoc
preference 3
ephone-dn 50 octo-line
number C001 no-reg primary
conference ad-hoc
preference 2
no huntstop
ephone-dn 51 octo-line
number C001 no-reg primary
conference ad-hoc
preference 1
no huntstop
ephone-dn 52 octo-line
number C001 no-reg primary
conference ad-hoc
no huntstop
ephone-dn 55
number A801... no-reg primary
mwi off
ephone-dn 56
number A800... no-reg primary
mwi on
ephone 1
device-security-mode none
mac-address 4142.4DB8.0000
ephone-template 16
max-calls-per-button 2
type anl
button 1:5
ephone 2
device-security-mode none
mac-address 4142.4DB8.0001
ephone-template 16
max-calls-per-button 2
type anl
button 1:6
ephone 3
device-security-mode none
mac-address 4142.4DB8.0002
ephone-template 16
max-calls-per-button 2
type anl
button 1:7
ephone 4
device-security-mode none
mac-address 4142.4DB8.0003
ephone-template 16
max-calls-per-button 2
type anl
button 1:8
ephone 5
device-security-mode none
mac-address 0024.97AA.E811
ephone-template 15
max-calls-per-button 2
username "Receptionist" password receptionist
type 7931
button 1:10
--More-- !
ephone 6
device-security-mode none
mac-address 0024.C4FC.4013
ephone-template 16
username "None"
type 7911
button 1:11
ephone 7
device-security-mode none
video
mac-address 000F.34FA.168B
ephone-template 16
username "steve" password petersteve
speed-dial 1 xxx label "Peter - Home"
speed-dial 2 xxx label "David - Mobile"
speed-dial 3 xxx label "Tim - Mobile AUS"
speed-dial 4 xxx label "Tim - Mobile USA"
type 7960
button 1:12
ephone 8
device-security-mode none
video
mac-address A40C.C394.B1F0
ephone-template 16
username "tim" password timoconnor
speed-dial 1 xxx label "David - Mobile"
speed-dial 2 xxx label "Peter - Mobile"
speed-dial 3 xxx label "Clare - Mobile"
type 7911
button 1:13
ephone 9
device-security-mode none
mac-address 0024.C4FC.5425
ephone-template 16
type 7911
button 1:14
ephone 10
device-security-mode none
mac-address 0024.C4FD.E27C
ephone-template 16
type 7911
button 1:15
ephone 11
device-security-mode none
video
mac-address 0007.5098.1AB6
ephone-template 16
username "holmes" password davidholmes
speed-dial 1 xx label "David - Home"
speed-dial 2 xxxl abel "Sue - Mobile"
speed-dial 3 xxx label "Peter - Mobile"
speed-dial 4 xxx label "Tim - Mobile USA"
speed-dial 5 xxx label "Tim - Mobile AUS"
type 7960
button 1:16
ephone-hunt 1 sequential
pilot 501
list 202, 203, 204
final 300
timeout 8, 8, 8
no-reg pilot
statistics collect
description Sales
alias exec cca_vm_notification schedule from_time=00 to_time=24
banner login ^CCisco Configuration Assistant. Version: 3.2 (3). Fri Nov 15 22:54:23 EST 2013^C
line con 0
no modem enable
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0 4
transport input all
line vty 5 100
transport input all
ntp master
end
UC520#I was configure custom disconnect tone refer to this site:
http://ciscoflair.blogspot.com/2009/05/cisco-fxo-disconnect-issue.html
And the tone is in the attachment, and the custom disconnect tone configuration like below:
voice class custom-cptone Disconnect
dualtone disconnect
frequency 420 420
cadence 251 255 245 250 249 250 250 250
and the port configuration was like below:
voice-port 0/1/2
supervisory disconnect dualtone mid-call
supervisory custom-cptone Disconnect
cptone NL
timeouts interdigit 4
timeouts call-disconnect 5
timeouts wait-release 5
timing hookflash-out 500
connection plar 334
impedance complex2
caller-id enable
caller-id alerting line-reversal
caller-id alerting dsp-pre-allocate
but it was not working and the phone still ringing after the PSTN caller disconnect.
but i was read about "dualtone-detect-params", and i was add the below command and i do not understand it, but it was solve hte problem:
voice class dualtone-detect-params 1
freq-max-deviation 20
cadence-variation 50
so what it is and how to determine this parameters. -
I seem to have very little or no service at all recently.
All my calls are cutting in and out or hanging up in the middle of a conversation. I have to stand in the corner or my kitchen to get a clear call or get at least 2 bars.
I called Verizon yesterday and tried a few things they suggested but nothing worked.
I dont have another phone to call them back on since they suggest we call from a different phone until the late evening. Someone was supposed to call my back and never did.
Not sure on what else to do.
I am extremely frustrated and annoyed that I cant even really use my phone.
HELPIf the on/off switch does not work, that is a hardware problem. The other problems may be related to a hardware problem or faulure as well.
Make an appointment at an Apple store if there is one nearby to confirm. -
I updated 4s to 6,1,1 and all the phone numbers are missing in my contacts,
How do I recover all my phone numbers?
On iPhone, open Settings -> iCloud
Turn OFF for “Contacts” option
Select “Keep on My iPhone” option
Close and Open Phone App, all your contacts should be back!
Now go back to Settings -> iCloud -> turn ON for “Contacts” and select “Merge All” option.
You are DONE.
This was fix for updating to IOS5, but it sounds like you are having a similar issue to this.
Full post here http://blog.initlabs.com/post/11390316577/how-to-restore-phone-contacts-lost-aft er-ios5-update
Maybe you are looking for
-
New MacBook Air does't show youtube completely in new tab
I just bought this MacBook Air yesterday. But I found out that the youtube always does't show the video cover whenever I open a new tab, and the comment session below the video always show loading. May I know what is the problem? What can I do to fix
-
ITunes Music files taking too much space???
In my innocence, I had imagined that the storage requirements of iTunes would match those of my iPod. The iTunes programme now tells me that I have 6,694 songs in my library, using 46.43 GB of space. However, my iTunes Music directory boasts 10,278 f
-
Image Slider not appearing/visual in live view/Browser
I updated a link to my image browser and once I hit refresh, everything seemed fine. I checked my rework on live view, and the whole slider (including images and buttons) were no longer visual. (You could not see them.) | <!--========================
-
End of flv triggers event(?)
Hello I'm asking if this is possible, if so; how to approach it? I'm using FLCS4 (AS3) and I've built a very basic site, simple pages on various frames. Three of the frames/pages contain video components that auto-play a flv clip. What I'm asking is
-
Hi everyone I am a commercial developer who is relatively new to Java technology. My company has just finished the initial version of a servlet-based web program which is designed to interact with a MySQL database. We are having a major performance i