All my pngs are corrupting

Yesterday, I think Fireworks was updated through my adobe
updater. I should have paid more attention, but I hit 'OK' and I
think it updated Fireworks and Dreamweaver to Version 9.01. I
finished this giant ping with all these complex graphics and
rollovers and saved it and closed it. I went to open it later and I
got 'unknown file type'. None of my backups would open except for
one that Fireworks automatically saved the day before. I redid most
of the work, using this older version and exported to DW...the
graphics all exported fine but the HTML doc was just blank with
some question marks. I closed the png, quit firefox, got the
'unknown file type' message again. So now I'd designed this png
twice and lost it. I restarted. Still no luck. So I recreated it
again. I didn't close it until I successfully got the page to DW.
Now I discover that DW has lost all my sites in 'Manage Sites'! So
I redo all the info for my ftp, etc for this particular site. I get
the page done, close the png and just to check, try opening it and
my backups and they're all 'unknow file type' errors!! What is
going on???

psychobunni wrote:
> Linda, thanks for replying. Yes, I'm just saving to my
hard drive on my laptop.
> I'm the administrator. I also saved multiple backups as
I was working, to my
> desktop. Every file I save and then close is unopenable
afterward.
>
Have you changed or added any new fonts?
Try deleting the Fireworks preferences text.
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
http://www.adobe.com/communities/experts/

Similar Messages

I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt. I would rather have my 2008 Dell at this point. what is wrong with this thing

I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt or damaged. I would rather have my 2008 Dell at this point. what is wrong with this thing

Perhaps the PDF files are corrupted.
Hit the command key and spacebar, a blue Spotlight in the upper right hand corner appears, now type Preview and press return on the Preview program.
Now you can try opening the PDF's from the file menu and see what's going on.
If they are corrupted, perhaps they are trojans from your Windows PC or gotten from a bad location online.
Download the free ClamXav and run a scan on the possibly infected folder.

Almost all installer packages are corrupt!

Hi,
The following installer packages are corrupt:
J2SE SDK
J2EE SDK
NetBeans 3.6, 4.0
Documentation packages
WSDP 1.5
etc.
I tried downloading multiple times, with Firewall on and off, with GetRight and with SUN DOWNLOAD MANAGER but results are the same:
either .cab file is corrupt or ZIP archive is corrupt or something like that.
I can't install anything!
My OS is WinXP Pro. I tried to install to Win2000 Pro, the same result.
The only thing that installs properly and works is Wireless Toolkit.
I would be very appreciate if someone could help.
Regards,
Sergei

Sounds like your Internet connection may be noisy. Try downloading using another connection, or have your connection checked.

When i will try to open my last saves, all my files are corrupted

Hello to all,
I am working with BPA, and i am creating some processes to my company,
when i will open my saved processes, all of them was like this
"(Untitled) [Business process diagram (BPMN)]"
all the activities are nameless, all the connections didn´t have the attributes, i only have the diagrams with no descriptions,
someone knows, which things can i do, for recovery my work?
thank you,

Hi,
no worries - you just logged in with the wrong language. Please go to the explorer module, and make a right mouse-click on your database. Select Log-Off and afterwards Log-in again. Choose the language and the Filter that you've used while you created your models.
In order to set your language and filter permanently go to "View -> Options -> Log in -> Database language" and "View -> Options -> General -> Method language".
Hope this helps,
Danilo

Mac Mail- all incoming photos are corrupted- but only on my MBP, not my iphone. Any ideas?

Hi,
My Mac Mail is driving me bonkers!
For the last week or so, it's been extremely erratic on my Macbook Pro (seems fine on my phone). First it dumped all of my sent messages- then it gradually loaded them all up again, over the course of a couple of hours.
Then it dumped three year's worth of messages from my inbox, slowly adding them back in again over the next couple of days (this still seems to be happening in some form or other in that my mail activity frequently tells me that 800 emails (for example) are downloading.
Most irritating of all, I can't receive any images without them being corrupted. They're fine on my phone- this is definitely a MBP only problem.
I've not changed anything recently- and my phone is still running iOS 6.1.3
Any ideas?

I switched around 9 years ago. Second Mac, first problem I've ever really had in all that time. It dumped another 30,000 emails this morning- including ones that I need to work with right now. Still receiving garbled images.
Went to schedule a call with Apple- see if they can shed any light on it. Going to get back to me in 6 days. Brilliant.
It's just not good enough. This isn't what I'm paying for.

All zip attachments are corrupt after downloading.

Hi there,
One of our content providers wants to link to a zip file from within a SCORM package.
After importing and publishing in exactly the same way as normal the zip file is always corrupted after a user downloads it.
Has anyone been able to get around this?
TC

Hi there,
We have a custom Netweaver portal for LSO that is designed to only work with IE. So i am unable to test with another browser.
I have tried republishing the package several times and each time the zip is corrupted.
I have tried this with self built SCORM packages and even packaged a zip as an attachment within an Articulate package and everytime the zip is invalid/corrupted.
I tested the zip by opening the package prior to publishing with Authoring Environment and the zip is okay, it is only after it is published through the repository that it is corrupted.
Cheers for any help or advice you can offer.
TC

An error occured while transferring files, now all of my photos/videos are corrupted

Ok, so this is a strange situation, so bear with me. I was transferring some files from my iphone to my harddrive yesterday. And then I got an error message saying that some of the files didnt transfer for whatever reason. I didn't think much of it, cause these were older files anyway. But then I looked, and all of my more recent files (everything from December 23-Now) got corrupt. This is strange, because the files that I was transferring were from before December 23, so they weren't overlapping at all.
Anyway, I don't even know where to begin, because I really don't know what this is. Here's a picture of what I'm dealing with.
As you can probably tell, something weird is happening, since I do not have 4 million photos. (But I do have 286 videos). When I try to play a video, it says "the requested URL was not found on this server".
When I connect this to image capture, it shows the files as such:
So some of the information is still there, which is strange. I've also tried backing up from the backup that I made right before this error occured, and it appears that the files are corrupt within the backup too. So I have corrupt files on my phone, as well as corrupt files on my computer. I went to my MobileSync folder and found the backup, and tried changing some of the files to .mov files, and this allowed some of them to turn into video files, but they appear to be corrupt.
So basically, what are my best options? Is there any way I can salvage these videos? Is there an app that can export these videos, and then repair them? I'm pretty much really lost here, and going to the genius bar was no help.

Ok, so this is a strange situation, so bear with me. I was transferring some files from my iphone to my harddrive yesterday. And then I got an error message saying that some of the files didnt transfer for whatever reason. I didn't think much of it, cause these were older files anyway. But then I looked, and all of my more recent files (everything from December 23-Now) got corrupt. This is strange, because the files that I was transferring were from before December 23, so they weren't overlapping at all.
Anyway, I don't even know where to begin, because I really don't know what this is. Here's a picture of what I'm dealing with.
As you can probably tell, something weird is happening, since I do not have 4 million photos. (But I do have 286 videos). When I try to play a video, it says "the requested URL was not found on this server".
When I connect this to image capture, it shows the files as such:
So some of the information is still there, which is strange. I've also tried backing up from the backup that I made right before this error occured, and it appears that the files are corrupt within the backup too. So I have corrupt files on my phone, as well as corrupt files on my computer. I went to my MobileSync folder and found the backup, and tried changing some of the files to .mov files, and this allowed some of them to turn into video files, but they appear to be corrupt.
So basically, what are my best options? Is there any way I can salvage these videos? Is there an app that can export these videos, and then repair them? I'm pretty much really lost here, and going to the genius bar was no help.

Upgrading from v4.3.5 to v5 all restores are corrupt

*** is going on? I install iOS 5 and it asks me to restore a previous backup which I try, and it fails every time saying some bollox or the backup is corrupt, all of them apparently not just one
I have no contacts, no notes, no **** all, how the **** are we supposed to get this all back?
< Edited By Host >

Hi
go through this
Up grade 3.5 to BI 7.0
Upgrading BW 3.X to SAP NetWeaver 2004s BI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
/people/prakash.darji/blog
Rolling out the New SAP NetWeaver 2004s BI Frontend Tools
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
/people/prakash.darji/blog
hope this helps.
M Kalpana
Message was edited by:
Kalpana M

All downloaded files via pacman -Syu are corrupted

I have a fresh install of AL and wanted to do a 'pacman -Syu' before going too far. Well it started fine and was downloading the files (about 20 in the list) and so I left it to finish while I slept last night.
This morning I wake up and check it and it shows all files that it tried to upgrade/install are corrupted. I'm using the 'Current & Extras' repositories in pacman.conf.
Is there something that I'm missing or doing wrong or a way to fix this without needing to re-install AL from scratch again?
rberry88 :?:

This is somewhat interesting unless I'm misinterpreting it wrong. I go to /var/cache/pacman/pkg and it listed the last 3 items/packages that I installed, I then did df -h and then did 'pacman -Sc' to clear these out and did df -h again:
[root@tux pkg]# ls
evolution-1.4.5-4.pkg.tar.gz gnet1-1.1.9-1.pkg.tar.gz pan-0.14.2-1.pkg.tar.gz
[root@tux pkg]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/ide/host0/bus0/target1/lun0/part8
22G 1.5G 21G 7% /
none 251M 0 251M 0% /dev/shm
tmpfs 2.0G 12K 2.0G 1% /tmp
[root@tux pkg]# pacman -Sc
removing packages from cache... done.
[root@tux pkg]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/ide/host0/bus0/target1/lun0/part8
22G 1.4G 21G 7% /
none 251M 0 251M 0% /dev/shm
tmpfs 2.0G 12K 2.0G 1% /tmp
[root@tux pkg]#
So, my opinion would be that it wasn't the disc space that was an issue but most likely a corrupted download or other problem that went away when I cleared the cache and installed the new pacman version.
rberry88

All apple software updates are corrupt

for some reason any updates I receive for my macbook pro through software update, itunes (for ipad, iphone), and even when I manually download them from the website (like 1.6.4 combo) are corrupt.
itunes + ipad with the new 3.2.2 update gives me error 14 with a link to this page http://support.apple.com/kb/TS1275. Not helpful in this case.
As far as OSX updates 10.6.4 would constantly corrupt. As does successive other updates like the recent camera raw update and xcode update. I would blame the OS install and reformat except for some reason when I tried these updates at a friends house they work... really strange. I have also resorted to torrenting the update in the case of the 10.6.4 combo. I would really like this fixed but I am at a loss for what to do, and google hasnt turned up people in similar situations for me.
Could shaw (my Internet provider), my router, or... anything be screwing this up somehow?

heres a relevant log, at least I think it is. Its the one generated by trying to update xcode to 3.2.3.
first the one for the software download:
10-08-07 5:33:21 PM Software Update[205] SWU: scan found 1 products:
zzzz061-8720
com.apple.message.uuid: 11E54BBF-F7D6-48D5-A93A-B8B6CE3B9903
com.apple.message.domain: com.apple.SoftwareUpdate.time.scan
com.apple.message.signature: SUCCESS: http://swscan.apple.com/
com.apple.message.result: success
com.apple.message.value: 75.43260
com.apple.message.value2: 2392.263
com.apple.message.signature2: Software Update
com.apple.message.signature3: SUScanResultCode, 0
then the corresponding error:
10-08-07 5:26:53 PM Software Update[594] PKG: extracting "com.apple.pkg.Xcode3.2.3Update"
Error Domain=PKInstallErrorDomain Code=110 UserInfo=0x11425fb60 "An error occurred while extracting files from the package “Xcode3.2.3Update.pkg”." Underlying Error=(Error Domain=NSCocoaErrorDomain Code=259 "The file couldn’t be opened because it isn’t in the correct format.") {
NSFilePath = "/var/folders/zz/zzzivhrRnAmviuee+++++++++/Cleanup At Startup/PKInstallSandbox-tmp/Root/Developer";
NSLocalizedDescription = "An error occurred while extracting files from the package \U201cXcode3.2.3Update.pkg\U201d.";
NSURL = "Xcode3.2.3Update.pkg -- file://localhost/Library/Updates/zzzz061-8720/061-8720.English.dist";
NSUnderlyingError = "Error Domain=NSCocoaErrorDomain Code=259 \"The file couldn\U2019t be opened because it isn\U2019t in the correct format.\"";
PKInstallPackageIdentifier = "com.apple.pkg.Xcode3.2.3Update";
com.apple.message.uuid: 466F8978-BD69-44EE-9229-90048E3FF2BF
com.apple.message.domain: com.apple.PackageKit.install.package.extract
com.apple.message.signature: FAILURE: com.apple.pkg.Xcode3.2.3Update
com.apple.message.result: failure
com.apple.message.value: 1.38748
com.apple.message.signature2: 1.0.1.1248867338
I dont see any entries for the ipad update failure in the console.
"That is very strange.
Did you have any of these devices connected to your MBP?
Had you used Torrents before this episode?"
currently my ipad, its stuck at the restore screen atm as the corropted 3.2.2 failed to load

Screen Capture files are corrupted

I use the built-in Screen Capture all the time....Command-Shift-3 and Command-Shift-4.
As recently as two days ago, it worked beautifully.
Today, it's not working correctly. The files get saved to the desktop, but they are corrupted. I can make out the image that I captured, but it looks like the horizontal setting on old cathode ray TVs is waaay out of sync.
I've tried a different user on the machine. I've tried changing the format from png to jpeg to pdf and back to png. Same result.
This is weird.
Any ideas?

OK, weird. The problem has 'gone away' without doing anything specific. I didn't even realize it - I just did a screen shot because I needed it and then sent it to the person who needed it. Only later, did I realize that I had had problems just yesterday.
I didn't even get a chance to try the suggestions listed above.
By the way, all three versions of the file were corrupted: the desktop icon, the Quick Look version and the actual file as seen in Preview.
If it happens again, I'll be back.
Thanks for the help people. I hope to return the favor.
Message was edited by: Zonker in Russia

Large scheduled DeskI reports are corrupt, but reported as successful

Hi, everyone.
One of our customers have recently upgraded from R2 to XI 3.1 SP2 + FP 2.9.
It is a standalone system (not clustered) running on Windows Server 2008 64-bit.
All BO server settings are default settings.
The problem was found when testing reports after migration.
After migrating, they have problems with some of their large reports.
These reports contain several prompts, and will take more than 3 hours to complete if the selection criterions are not limited significantly by using the prompts.
This was not a problem in R2.
The problem is as follows:
If one schedules the report and limits the data to retrieve, say, one month of data only, the reports schedules just fine and the instance can be opened without problems.
But, if one increases the time period to a year, retrieving a lot of data, we run into problems.
The history of the report will tell us that the report has run successfully, but when we open the instance in InfoView the report will immediately fail with an error message which just says Error: INF.
Nothing more.
I then tested by finding where the physical files for the instances were located in the Output File Repository using Query Builder.
The small instances can be opened directly using DeskI full client.
When opening the reports which gave me Error: INF in InfoView, I get "Unknown Error. FRM0007." in DeskI. This indicates that the u201Cbigu201D reports are corrupt.
Also, if we schedule to PDF, the PDF generated only contains "placeholders" for the data.
See this link for screenshot from a part of such a PDF. [PDF with errors|http://i1141.photobucket.com/albums/n597/AffectoASM/datalabels.png]
So the problem is: The scheduled reports runs for more than 3 hours and are reported as being successful. However, the report instance generated is corrupt.
Do anyone here know what might be the cause of this?
Thanks!
Edited by: Jan Terje Hansen on Aug 12, 2011 12:41 PM Typos

Appreciate the response, although I do not understand the SMB reference as I thought iSCSI was a direct block transfer. Indeed the memory load does increase during the period of the network activity. So caching applies to iSCSI
direct block access as well as SMB? Apologies for my ignorance.
iSCSI is cached on client side just like any physical disk (marked removable or not). So files you copy go to Cache and Memory Manager cache before traveling down storage stack pushed by Lazy Writer. So you see what you see: smaller amount of writes (<RAM
size) go immediately to memory and then storage stack, TCP, iSCSI and network actually kick in.
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

I just updated the new iTunes and now all my playlists are gone!! What the heck?!

All my playlist are gone from itunes with the new update. If I click on "sync" it asks me to erase all my music and videos... Is there a way to avoid doing this? Thanks.

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
In the unlikely event that your media has been wiped from your computer see Recover your iTunes library from your iPod or iOS device.
tt2

All my songs are missing in action..

I opened my iTunes, clicked on the "My iPod" folder and found my songs in gray, and after exiting and re-entering I found them gone; from both my iPod and Music Library.
* I am using an iPod Nano
Please help me, I paid for nearly half of these songs; I don`t want to waste my money..

There are usually always two copies of your music. It's highly recommended that you make *at least* one more copy by backing up your music by burning CDs or copying them to another hard drive.
1) one copy is on your computer in your iTunes Library
2) a second copy is on your iPod (all songs that are currently synced)
iTunes maintains a database file that tracks the music in your Library. If this file becomes corrupt or otherwise unusuable by iTunes, then it may appear that your music has been deleted. Plugging in your iPod will then cause it to become updated to match the Library (if you have auto-sync enabled or do a manual sync).
The first thing you want to do is search your computer for your individual song files. By default, they are stored in "/My Documents/My Music/iTunes/iTunes Music" in subfolders for each artist and album.
It may be that iTunes has simply lost track of your song files and you need to correct that.
Don't panic. Learn how iTunes is designed by asking questions and chances are you'll recover all your music.
1) Fix iTunes first.
2) Then sync your iPod second.
** BACK UP ALL YOUR MUSIC **

MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: One or more components of the HP printing software are corrupted or missing. Reinstalled software but Mac will not cause printer to print.

? MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: "One or more components of the HP printing software are corrupted or missing..." Reinstalled software but Mac will not cause printer to print. My MacBook Pro works fine with same wireless printer.

Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

All my pngs are corrupting

Similar Messages

Maybe you are looking for