All N-Series themes request

Right, i've looked...and looked...and looked everywhere for all the preinstalled n-series themes that will work on the N80, but am not having much luck. Basically, i'd like all the official Nokia themes that either came pre-installed on the phones, or hidden on the PC suite discs. I'm not a big fan of most third party themes i've seen, and like the bugless Nokia one's. If anyone can point me in the right direction, that would be great!
Thanks,
Ed

Dunno if this is any help to you, but from another post i created here's the following:
It seems Nokia have a few (ok, 5) themes available on the S60 website. These can be found here, along with a couple of other freebie applications http://www.s60.com/life/application/displayApplications.do?type=3 Have to admit, i'm quite a fan of the Turquoise theme... looks good on both my N70 and my 5500
It's not specific ones for specific devices, but they're made by Nokia, as requested and they're bug free (as far as i can tell... i'm still using the turquoise one. I have to say, i agree with you. The 3rd party themes out there tend to be awful. Why can't people do simple themes anymore?

Similar Messages

Do you have an option for block all incoming message and request EXCEPTED messages from my contacts?

Please help!!To whom it may concernDear Madam/Sir who works for Skype & Microsoft Dear all who can really help, Do you have an option for block all incoming message and request EXCEPTED messages from my contacts? or Do you have any solution to solve my problem from begin to now in present time? Even though, I set the Privacy settings: - Allow calls from... "people in my Contact list only"- Automatically received video and share screens with "people in my Contact list only"- Allow IMs from "people in my Contact list only" I still received unknow users sent me messages in every day, contact requests etc. And they're all clearly spammings and identity thefts. I only wanna contact with my family and my freinds here with Skype via my Windows device and my mobile phone (w/Android OS). And this is the only way to contact with them, because they could use Skype only in overseas. BUT I don't need new friend from other unknow Skype member. I keep blocked all unknow spammers in every day. However in this morning, I feel so scared with Skype on my mobile, I looked at my mobile Skype, I saw it automatically showed me the list of all blocked members. BUT they were all unblocked (contact unblocked) by my mobile (Android version) Skype itself automatically, and listed them one by one on the screen, and about 30 seconds later, they all were disappeared suddenly. I don't know what do to now, is it indicating my account was hacked?And how could I found out all those members again and block them again and delete all of them for ever? I appreciate if you would improve the privacy protection. Thank you very very very much.

Hrm... that may be true and this may be a function of the phone email client that Apple just doesn't do.
No, I can easily MANUALLY delete the messages. I would prefer if I didn't have to do it twice, tho. Once on the mail server and once on the phone.
What I think the phone needs to do is, when it checks the POP, anything NOT there should be removed locally. I think you are correct on POP; the phone will poll the mx (mail exchanger) and the mx will pass off the messages to the phone. The phone then keeps ALL of that unitl you manually delete it.
If, say, I remove a message from the mx, I would like the phone, when next polls, to see that that particular message isn't on the server anymore and remove it locally.
Perhaps it's just me but if I delete the message on the mx itself, via my ISP's webmail interface, I really don't want to have to remove it again from my phone.
thxs!
cheers
rOot

When releasing a transp. req.not all object in the request could be locked

When trying to release a transport request I get error message that "not all object in the request could be locked. Do you want to release them anyway"
I found an unreleased request (from someone else) containing few objects from my request. However I do not know the owner of that request (and I can not felete it). What to do?
If I release the transport anyway what could happen?

Hi Tina,
If ur sure that u only want to release object which u have created and not the other objects then proceed in following way.
1. Go to SE10 and click on create button
2. u will get a popup select the 3rd radio button(ToC)
3 Give the decsription of the Tp
4. u will get anext screen here in menu select request
task->object lise ->Include object (new screen) here u select radio button freely selet obkect -> then new screen then selected the radio button selected objet. Here u give ur object and those object will be store in the created request then u can transport
Regard
Anees Ahned

Is it mandatory to delte all the previous delta request.

Hi Gurus,
I got strucked up with the following issue. Please help
We have two infocubes called regional and global cubes.
We are loading data from regional infocube in to global info cube through delta update.
But the values did not tied up. so I ran the INIT and loaded the data succesfully. Now Is it mandatory to delte all the previous delta request which are already loaded in to the global infocube.

Hi,
You need to delete the data from cube and need to do init accrodingly load the data.
Thanks & Regards,
Ramnaresh.

All but 1 theme per group disappeared after Premiere Elements 4.0 crashed on start of burn to DVD

I have a project that is approximately 1 hour in length. This is the first project I am attempting to burn. I assigned a theme to the project and then proceeded to burn a DVD. Before the burn could actually start, PE crashed with a "blue screen" dump. I rebooted in Windows safe mode, then rebooted back into normal Windows mode. When I started PE and opened the project, nearly all of the themes were missing! It appears that only one theme per group remained.
What would have removed or hid the themes? I would have also expected all or none of the themes, rather than leaving just one per group. I was using a template in the "General" group, but the one that remained after the crash is not the one I had assigned to my project.
Does a reinstall restore the templates? If so, can I reinstall PE 4.0 from my CD without erasing, distroying, or losing the current projects I have created?
Thanks in advance for your comments!

Hunt,
Before diving into the details of the items in the article, I did a few of the basic things:
stopped my anti-virus product (doh!)
stopped the temperature monitor software (doh!)
did a quick disk cleanup
turned off all trivial stuff in msconfig
I rebooted the system and started Premiere Elements. I had not attempted to reload the templates at that point, so I proceeded to "Burn to DVD". I selected the minimal quality and started the burn. That worked! Next I exited PE and restarted it and then was able to successfully "Burn to DVD" using the max setting for quality. As expected, it took a while to finish, but it also completed successfully! The resulting DVD looks and sounds great, so the rendering and burn phases seem to be working fine on my hardware.
I noticed on the CD that there is an option to load the themes, so I am going to try loading that today. I'll post more comments after I get the themes reloaded in case there are other steps involved in restoring those within the program.

Why Am I Not Seeing All My Public Themes On My Public Account?

Hello,
I have been using Kuler with iphone for a few days and I love the potential of this service. It is a lot of fun.
One thing I am having an issue with is seeing all my public themes on my public account.
My account is here: https://kuler.adobe.com/userId%3A2735426-art-colors/
I am only seeing about 2/3 of the themes I made on the pubic view, which is what I am able to see and access with photoshop or illustrator.
The themes that are missing are definitley public, so I would assume they should show up. Any ideas on how to make them all show up on my public account profile?
Thank you,
Austin

The recent kuler maintenance should have resolved your issue. Let us know if it hasn't

Some or all of the samples requested have not yet been acquired?

Hi,
I'm running the labview codes (8.5) on Mac platform. The Daq part number is USB-6211. Here are more details:
Mode: differential, continuous sample
Samples per channel: 250,000
Sample rate: 250 kHz
Channel: A1, A9
The data acquisition goes well in the first hour and suddenly it shows error-200284, Some or all of the samples requested have not yet been acquired. The timeout is much higher than samples / sample rate, which is 100 s. Is anyone can help me with this? I attached the labview codes.
Attachments:
Screen Shot 2012-10-31 at 6.20.22 PM.png ‏265 KB

1. As said, you should not be using the Run Continuously button. Use a while loop to acquire your data. Setup the task before the loop and close it out after the loop.
2. When you have the while loop, put a wait in there (1 second might be good). This will help avoid the timeout issue.
3. Propagate your errors. Have the while loop stop on the error or your stop button. Use the Simple Error Handler at the end.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Transport Release Error: Not all objects in the request could be locked.

Hi all!
I hope you can help me with this one.
We need to transport a particular request in our QA and Production client. However, upon releasing of the transport request number, a warning/error message appeared on the screen:
'Not all objects in the request could be locked. Do you want to release anyway?'
I tried to display the error and below is the object messages:
Object messages: R3TR TABU ZLIFNR
Task F5DK900107 belongs to a different category
I don't know what that means, but I noticed that there are too many objects under the customizing task which I think is not part of the latest customization. I'm not sure what to do, I hope somebody could give me some advise.
Thank you very much.
Regards,
April

Hi!
There are many IMG activities under that same request which is not supposed to be transported to QAS. Is it possible to transfer the IMG activity and other customization into a new transport request? if possible, how?
I'm thinking if I can just try to change/save again the new configuration to a new transport request number. But if there's an easier way to solve this problem, I will consider that option.
=) Thank you...

I have three chargers(the newer kind) and all three of them have major shorts in them. They have to be in a specific postition for them to charge! Why is this? Are all of them having problems?!?!

I have three chargers(the newer kind) and all three of them have major shorts in them. They have to be in a specific postition for them to charge! Why is this? Are all of them having problems?!?! This is just RIDICULOUS!!!

I have a charger for the iPhone 5 that has absolutely no problems. I got my iPhone 5 the day they were first sold almost a year ago. Also in my family are 2 iPads and 2 iPad mini's all with the new lightning cables and none have had problems.
If you have problems and they're legitimate Apple products, bring them back for replacement.

Upgraded to iOS7 but cant accept the terms and conditions as it is 'unable to connect to server' on both my iPhone and iPad, whilst my collegues all could accept them...RESET did NOT work. Any alternative thoughts?

upgraded to iOS7 but cant accept the terms and conditions as it is 'unable to connect to server' on both my iPhone and iPad, whilst my collegues all could accept them...RESET did NOT work. Any alternative thoughts?

I got it to work by enabling cookies in safari settings and turning off private browsing. Cookies are probably the key thing here. Accept button will appear at bottom right of first screen of agreement.

HT1338 My mac book pro has three updates ready to install. When I select all three of them and click install it shows them downloading, the computer restarts, and when the computer turns back on and I go to updates again they are still there to install.

My mac book pro has three updates ready to install. When I select all three of them and click install it shows them downloading, the computer restarts, and when the computer turns back on and I go to updates again they are still there to install. Help

Best to install them one at a time, re-booting between each one.

Creative SB Live! Series (WDM) requesting ctlface.sys -

I`ve got Creative SB Li've! Series (WDM). I?ve just installed XP. SP3 and I now don?t have sound. It is asking me for ctlface.sys. Does anyone know where I can find this file?

Thanks for the help getting the correct drivers. I installed them and re-started the PC but I'm still left with my orginal problem. I'm using a program called "Audio Cleaning Lab" to re-master some old tapes onto CD (all the stuff I can't get on CD). It has an input level meter that shows the level of the incoming audio signal and this is used to ensure that the signal isn't strongth enough or is too loud (which results in clipping and distortion). I can hear the music thru my hi-fi, but no matter how much I move the slider on the "Recording Control" I can't hear the change (sort of in real time). The change does occur but I can only monitor it visually (doesn't allow any fine tuning) or after the recording has been made (that'd take a long time to get it just right). What am I missing? [Feel free to start this as a new thread.]Message Edited by clarke7052 on 05-7-2005 2:58 AM

I just downloaded IOS 8 on my Iphone 5 and to do so i had to delete all my photos to clear space, but before so I selected all of them and copied them. Now were can i go to paste all 400 of them and get them back ?

I just downloaded IOS 8 on my Iphone 5 and to do so i had to delete all my photos to clear space, but before so I selected all of them and copied them. The only place I can seem to be able to paste and see them is while making a new message in gmail and then when i tried to send them the message comes back blank and looks like below. what can i do to retrieve them?
<Edited by Host>

As razmee209 said, you can use iTunes to install photos on your phone from wherever you have them stored. Where did you copy them to? Are you saying you selected them on you phone and just hit "copy"? That would only copy one at a time to the "clipboard" so that you can paste it somewhere else. As you copy each one, the previous one is deleted from the clipboard. This is not a storage area. Did you back them up on your computer or in iCloud?

Only one ringtone works for all contacts despite them having separate rings

I have 25 rings (is that too much?)
And 33 contacts. The majority of them have their own ringtone.
However, despite me assigning them a ringtone-- only one tone (the one assigned under "Sounds" plays for all of them.
I didn't have this problem before.

You said you did not have this problem "Before", before what? What changed?
33 is no too much, I have 50-60 or so, w/o issue.
Try Resetting the iPhone
Reset the iPhone by holding the sleep/wake button at the top right of the device and the home button at the bottom center of the face at the same time. Hold them both until you see the screen go black and the white Apple logo appear. When this happens, you can let go - the iPhone is rebooting.
I have not seen this issue before, so basic troubleshooting may help.

DC jacks; are they compatible with all 3000 series

I would like to know if all the DC power jacks are the same or compatible for all the lenovo 3000 series notebooks?
I have a lenovo 3000 C100 notebook, and the problem that I am experiencing is that the unit dose not power up when
the power button is press. here's the rundown of the problem; when I plug the power cord onto the laptop the indicator
ligth for the power is on, but when I press the power button to on, the power indicator turns off and the laptop does not
turn on at all, the only time the power indicator turns on is when I disconnect the power cord from the laptop and plug it
back on. I also try it with the battery without the AC cord, the indictor lights for both power and battery is on, but when the
the power button is pressed both indicator lights will flash (one at a time ) for at least 2 seconds and does not come back
on at all and the laptop still does not power up at all. I have also tested the unit with another different battery and AC power
cord from a same working 3000 C100, still the same issues. so I figure that it has to be the power DC jack, check lenovo
website, but found none for the C100. so I want to know if other DC jack from let's say the T4 or T60, Thinkpad can be use
as replacement part for my unit. my laptop is only a year and a half old. I would be very gratefull for any kind of help.
Thanks

there are not many motherboard for Lenovo 3000 laptops on sale on the web, the only place where you can get it, is through Lenovo parts service... i would suggest you sell your laptop for parts and then get a new laptop, it would be probably be more economical that way then getting a new motherboard through Lenovo.
Message Edited by wjli2 on 10-15-2008 09:04 PM

All N-Series themes request

Similar Messages

Maybe you are looking for