All of a sudden, 10.3.1.55 repeatedly crashed- playlist clicking?

I was clicking thru each playlist, comparing them to what I just uploaded to Google Music Beta.
Going back and forth rapidly from browser to iTunes, clicking thru every playlist.
Could the rapid loading of each playlist of caused it?
It happened three times I think inside of 5 minutes...and not since then.

Thank you curve8530curve8330 for stepping up and helping me out ...
I think I'll try re-installing the BB Desktop Software 7.1.0.41 ... the ' ... no BB Device Software installed ... ' GUI message has me concerned that there has been a Registry disconnect somehow involving the USB driver software registered with BB D. S. 7 ... this would indeed be a Windows 7 problem ... I'll update the thread and give you credit for pointing me in this direction ... if it works.
However, to be clear, I am connecting my 9630 using a USB interface cable connected to a USB 2.0 port on the Win 7 system ... I am not removing the 8GB MicroSDHC card from the phone and then utilizing a MicroSD to SD adapter or SD port ... whatsoever.
And , as for connecting via another computer, now that I have thought about this some more, that may have been what precipitated the problem in the first place ... I had experimentally tried re-connecting the 9630 to an XP Pro SP3 32-bit notebook loaded with BB D. M. 5.0.1.28 ... (after never having done so again since the Win 7 Pro SP1 64-bit / BB D. S. 7.1.0.41 system came into use). I don't see, off-hand, how that could have caused this issue, however, the coincidence is too large to ignore.
FFF

Similar Messages

All of a sudden I can no longer open tabs by clicking "+" or right clicking on the tool bar. To open a new page, I have to open a whole newFirefox window. How can I fix this?

All of a sudden I can no longer open tabs by clicking "+" or right clicking on the tool bar. To open a new page, I have to open a whole new Firefox window. How can I fix this?
Also, Firefox crashes frequently. Is there a fix for this also?

Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox 3.6 that prevents new tabs from being opened.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons
For the second issue, the [[Firefox crashes]] support article may help.

It all of a sudden stopped working and when I try to click on something my computer just beeps at me. I cant even exit imovie

My imovie all of a sudden stopped working when I was in the middle of making a project and then all of a sudden when I tried to click on something my computer just beeped at me. I cant even exit out of the program! Or shut down my computer unless I quit imovie. Help?!?!

What version of OS X and iMovie are you using?

All of a sudden, i am getting very frequent crashes with shockwave flash plugin. I use a PC - windows 7. help!

I can't seem to stop flash plugin from crashing.

We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and paste them into your response here.
[[Image:SubmittedCrashReports-Win7|width=520]]
<br><br>
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article.

I have been working on a book and have 418 photos already in my book. All of a sudden I cannot access the book format to see the multiple view, spread view, or single view. I can no longer see my book although I still see the collection with 418 photos

I have been working on a book and have 418 photos already in my book. All of a sudden I cannot access the book module and clicking on the multiple view, spread view, or single view does not take me back to the book I have been working on. I can no longer see my book although I still see the collection with 418 photos under collections. What I do see is a blank template for a new book and I can't find the unfinished book I started with 418 photos. It is like the new empty template is somehow covering it up. How do I get back to the book I have been working on?

Is it possible you mistakenly clicked on a [Clear Layout] button?
But a great hint is- Always click on the [Create a Saved Book] button, early in your new book design.
Then you have a permanent link to the book in the Collections panel. (In addition to the standard collection of your selected images)
Note: a Book Collection shows an icon that looks like a book.
Every time you come back to edit the book, open the Book Module by clicking on the white arrow that appears on the end of your Book Collection title. (The title as saved)
Re-opening a book without using the "Saved Book" option can have unpredictable results.
A "Book" Collection is like a "Smart Collection" because anything you do to the book design, change pages, change images, etc, is automatically updated in the Saved Book collection.

My IPOD keeps repeating the song. I've had it for almost a year and it has been fine. All of a sudden it has started repeating. Help!

I've had my ipod nano for almost a year. It has worked fine. All of a sudden it has started to repeat. I've tried everything. Help!

It's pretty easy to accidentally set the Nano to repeat. Have a look at the manual (download the manual here) on page 21.

My mail is loading very slow all of the sudden,but web pages are instant,any idea why it takes forever to load when i click on any mailbox

my mail is loading very slowly all of the sudden,web pages are instant,takes forever to click on a mailbox and read the mail ,any ideas

Using mail or an other application?
Same problem on different mailbox?
1- try an other mail client
2- try with different mailbox (google, icloud, ...)
This can be a temporary problem from your mailserver ... wait 2 or 3 hours ...

I have files that have been on my computer for over a year and all of a sudden they wont open and an error message comes up saying they were improperly downloaded or came in an email attach which is not the case

I have files that have been on my computer for over a year and I have used them several times and all of a sudden they wont open. I received an error message saying they are improperly downloaded or came as an email attachement which is not the case. Please advise

They seem to be word files - they will open if I choose "open with" microsoft word, but if I double click they don't open they are appearing as PDF on my screen. I even opened one and then tried to "save as" making sure I chose .doc and they still appear as PDF
I just created a new document response.doc in word and when I saved to my desktop it appears as a PDF file and I absolutely did not create a PDF or save as PDF it was a simple word
doc.
The message says "Adobe reader could not open response.doc because it is either not a supported file type or because the file has been damaged (for example attached in an email and not properly decoded)
The reader version is I believe the most current, I always update when prompted. OS is Windows 8

Help! I am making an iPhoto book and all of a sudden it will not open and I get a huge error message which is supposedly sent to Apple. How do I access that site????

Mac osX 10.6.8
iBook - old version
can not access Safari - going through Chrome
All of a sudden my IBook would not open (100 pages and almost finished)
Error message sent to Apple - how do I access them??????
Thank you for any help you can give me
<Email Edited by Host>

Do you mean, you have been creating a Photo Book in iPhoto? Or an iBook in iBook Author?
If you are asking about a photo book in iPhoto, what was the last you did in iPhoto, before the crash happened? Did you add a page with a map?
Then you may have a problem with a bug, where adding a route to a map may render the book unreadable. In that case the best option is to restore the iPhoto library from the last backup you made, before you added the map to the book.
It is not possible to open the book and to delete the unreadable page. You can only delete the book and start over, if this bug is the reason for the crashes. See for example this link: Getting rid of problem photo book

I have been using Photoshop Elements 8 for years. All of a sudden, the cropping tool changed: I cannot crop vertically or horizontally anymore--only diagonally. This has made it impossible for me to get the photo I want. I hope someone knows how to fix th

I have been using Elements 8 ever since it came out, and all of a sudden the cropping tool has changed: I can no longer crop horizontally or vertically, only diagonally. The up/down/side arrows have disappeared! Please help if you can, I'm no longer able to make my photos look their best. Thank you in advance.

Quit the editor (Quit PSE on a mac). Then restart it while holding down ctrl+alt+shift (command+option+shift). Keep the keys down till you see a window asking if you want to delete the settings file. You do.

My time capsule all of a sudden disconnected from the wireless system and can no longer be fund by my MacBook Pro. The little lamp on the the capsules has turned off, but it still makes a noice inside,

My Time capsule did a backup yesterday in the morning without any problem. All of a sudden, it disconnected from the wireles system last night and the little indicator lamp turned off. It still makes a noice, as if a disc was turning inside. The Time Capsule was bought last year in June. Any suggestiom what to do? What happens if I press the little buttom (reset?), will I loose af my backup?

Do a reset.. power off the TC..
Hold in reset and power on.. keep holding in reset until it flashes rapidly.. if it turns on at all.
If you bought it in June.. take it back today.. it is broken.. at a guess.
Some Gen4 are failing this way.. get Apple to replace it.. even if it is a few days out of warranty it won't be much.

All of a sudden I can no longer toggle or clip angles in multiclip sequence

Hi,
I've got a project with a number of sequences, videos, angles, etc and all of a sudden I can no longer toggle between angles in the sequence timeline. It was working last night and then stopped and it's still unresponsive. Every time I click to switch an angle or cut to an angle I get the alert beep.
I am not out of disk space and haven't changed any settings as far as I am aware of.
Thanks

Not sure what the deal is...have you added any new software or upgraded/updated anything since this started?
Have you tried opening an autosave version, to see if it works there?
Trashed prefs, run disk utility?
I'm not sure I've ever heard an 'alert beep', so would wonder if the drive is failing.
Can you be a little more explicit about exactly how it 'stopped working'...were you right in the middle of working on it, or had you stepped away for a bit?
Have you tried shutting down, then rebooting after 15-20 minutes?

In my small office ethernet network all of a sudden one of my imacs cannot be connected to. It can connect to all other computers and can access internet, but as soon as someone tries to connect to that mac, it disconnects from the network. Any ideas

I have a network of 9 macs that connect via ethernet and a router. All of a sudden one of the macs cannot be connected to. It can connect to all others and the internet, but no one can connect to that one. I have appletalk active and file sharing on, but everytime someone tries to connect to it, it is not on the network. Additionally, the personal file sharing keeps turning off even though I have it locked. Any ideas?

Hi orangekay
not sure where you got the idea that I have
bizarre encrypted filesystem plugins and scripts you have manipulating them all the time
because I do not have any such running, just normal Applescripts that do tasks that could be done by hand.

HP Officejet Pro 8600a all of a sudden is not recognized by only my computer in the house

Hi, I have 4 laptops in my house. We have all been connected wirelessly to my HP printer for over a year. All of a sudden, for some reason, my computer no longer sees the printer. I have an ASUS. I run Windows 7 with Windows Firewall. My router is a 3 month old Linksys EA3500. I can print from every other printer in the house, and I can also print from my Android Phone. However, when I try to print from my laptop, it now says that it is detecting printer has been turned off. I have done everything I can think of to fix this. The only changes I recently made were installing Webroot AV program. I can't be 100% certain, but i'm pretty sure I have printed since that installation, and all of the other computers on my network are using Webroot as well with no issues. Hoping for some help. Here's what I've done so far:
Tried troubleshooting printer via computer. It's gone through the spool service check and whatever else the standard troubleshooting does. It said something about my printer being turned off. It definitely was not, but I unplugged and restarted just to be sure. No fix.
Noticed IP changed on printer and thought maybe something with static vs dynamic (don't know much about this) so went to "update IP address" on my laptop and updated the info. Checked the router settings info by entering printer's ip in browser. Printer shows connected and ready and all looks good. I pinged the ip and got results. Mac filtering is not enabled so I don't need to deal with that. SSID is not hidden. The 802.11 configuration says that the network type is WPA-PSK with WPA2 and AES selected for encryption. Same as it always has been.
Double checked to make sure printer was recognizable by my firewall. It is on the accepted list.
Last resort: I uninstalled the printer software and deleted the device from my laptop. Attempted reinstall, but when it gets to the part where it's supposed to search for the printer it says unable to find. I enter the IP address from the printer and it still cannot find. I enter the host name and it still can't find. Since I uninstalled everything, I can no longer install the printer at all.
Went to drivers on line and tried using the install via online option. same results. "unable to find printer".
I unpugged the printer from the wall again, this time for over an hour, hoping it would reset but realizing this probabaly isn't the issue since every other laptop can print in my house.
Tried to connect ethernet cable and install printer that way. Plugged one end into router and other into printer as directed on troubleshooting tips. Ran Disk software and it doesn't install the printer. IP address changes on printer when I use ethernet and I am entering new ip accordingly.
Reset my modem and restarted. Reinitialized my router and then used the software to reconfigure it. did the standard 'wait ten seconds and plug everything back in and reboot computer'. No fix.
Checked my wireless network adapter setting to make sure I have most updated drivers. I do.
Deleted every single thing that relates to my printer in every folder and in regedit.
Tried reinstalling printer both wirelessly and with ethernet. Still unable to find printer either way.
I have changed no settings that I can think of since the printer last worked a few weeks ago. As I said, every other computer prints perfectly. The only thing I can think that's different is that all the oher laptops are running Windows 8 and I'm still on 7, but that didn't matter before, and I can print from the HP print software on my phone.
Please somebody tell me what I'm missing here. I'm going bonkers. Thank you so much to everyone who takes the time to reply on this support forum.
This question was solved.
View Solution.

Well you have done quite a bit. Let's try here if you haven't.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02915280&tmp_task=solveCategory&cc=us&dlc=en&lc...
Then let's give this a shot.
These settings are for setting up your wireless printer to stay connected to your router, keep wireless devices better connected and makes your router secure and hack proof.
1. Set a static IP in the printer (click here) outside the DHCP range of the router (check your manual).
   This is for Linksys routers but can be used for all routers. Verify your DHCP range and change this
   first if needed. More Wireless Printing help is here (Windows solution 4, static IP).
2. Verify in the printer that 'Auto Off' is disabled. Use the Embedded Web Server (EWS) by going to the
   printers IP address in your browsers address bar, click Settings Tab/Auto Off. Or use the Printer
   Assistant, Printer Home Page (EWS).
3. If the printer supports and has IPv6 enabled, turn off IPv6 in the printer.
4. If needed and you assigned a static IP address, try using 8.8.8.8 for the Manual DNS server and
     8.8.4.4 preferred DNS server.
In the router: (Refer to your router manual for information)
5. Use a fixed wireless channel like 1, 6 or 11, never 'auto', try channel 1 first then the rest.
6. Set router to 20Mhz only, or 145Mbps depending on router.
7. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode.
8. Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your
   system now and helps with wireless connectivity (if you want to know why, search the web).
9. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same,
   they must be different for all bands, even for any Guest networks.
10. SSID broadcast must be enabled.
11. Save all settings. Power off both, wait 2 mins. Power on router wait 2 mins.
12. Power on printer and verify it reconnects to router.
Windows 7/8/8.1   Is Network Discovery on or off?
Control Panel/Network and Internet/Network and Sharing Center/Advanced sharing settings.
Under Home or Work (current profile) / Network Discovery.
Select "Turn on network discovery" and save changes.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

I can not send email from my iPad . Have been using it for over a year, all of a sudden I can only receive email. I have a wifi connection in my home and have a A T &T cellular data plan?

I can not send email from my iPad . Have been using it for over a year, all of a sudden I can only receive email. I have a wifi connection in my home and have a A T &T cellular data plan?

I have a 1st gen iPhone that I just updated the software to 2.0.2
Now whenever I press the mail icon it goes to the mail app for about 4 seconds, does nothing, no loading of folders, old messages, nothing.
Then it reverts back to the home screen. Tried restarting, haven't tried restoring, thought I'd look here first.
Anyone???

All of a sudden, 10.3.1.55 repeatedly crashed- playlist clicking?

Similar Messages

Maybe you are looking for