All of a sudden a site that I use frequently is now saying that cookies are required to enter the site.  I did not change any settings or anything.  I was on the page earlier and now it's giving me this message?

Why would it start giving me this msg?  I didn't change ant settings or anything. 

Go into settings > safari and check to make sure that you have accept cookies checked.  I'm not sure what could have changed, and if that is checked and you still can not access what you once could, I would recommend a reboot:  Hold the power and home buttons at the same time for at least 10 seconds (keep holding past the swipe to shut down bar, should it show up) until the Apple Logo appears, then let go of both buttons and your iPad will reset.

Similar Messages

  • I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

    # Question
    I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • HT201303 Please cancel any order done by mistake from your store and credit the money I did not downlaod any of these songs which was hit by mistake .Thanks

    I have clicked on some item by mistake and  I was  charged. I have not downloaded any of them.
    Please canecl these transaction and credit the money.
    Thanks
    <E-mail Edited by Host>

    These are user-to-user forums, you are not talking to Apple here - I've asked the hosts to remove your email address from your post.
    All purchases are considered final (whether downloaded or not), but you can try contacting iTunes support and see if they will give you a refund or credit : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
    <Email Edited by Host>

  • HT204389 IPad is in "voice activation mode" and it will not open.  I did not change any settings.

    IPad Air -32 suddenly is working in "voice activation" mode.  The ipad is locked and I cannot figure out how to unlock it.  Using  OS7.1-Any thoughts?

    Try triple clicking the home button.

  • I did not use my computer yesterday, and now all of a sudden, Firework does not open at all after clicking on its icon or starting as a program. I did not download any upgrades or anything else, and I have Norton 360 v.3. What could be the problem, how ca

    I did not use my computer yesterday, and now all of a sudden, Firework does not open at all after clicking on its icon or starting as a program. I did not download any upgrades or anything else, and I have Norton 360 version 3. I can open Internet Explorer, but that's not my default browser, so I have no problem with the Internet connection.
    What could be the problem, how can I restore my browser without losing my bookmarks, settings, etc?
    == Operating system ==
    windows XP

    If you close Firefox, then start Firefox in Safe Mode, does the problem still occur? For instructions on starting in Safe Mode, see [[Safe Mode]]. Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]] Update Firefox, see [[Updating Firefox]]

  • Bought ipod touch5 from the buyer-and the last owner has not stepped out of his iCloud.ya updated to 7.1.2 and now I need it from appleID Icloud

    bought ipod touch 5 from the buyer-and the last owner has not stepped out of his iCloud.ya updated to 7.1.2 and now I need it from appleID ICloud I solve the problem of activation, if the owner had gone to Iraq? do not offer contact with the old owner as it is silly. a1421 model serial number c3*****4k1
    HELP ME PEOPLE
    <Edited by Host>

    Hey wangyz_david,
    Thanks for the question and detailed information. I understand that you are experiencing issues with your iPhone 5s in relation to battery life. The following website outlines some great tips for maximizing battery performance:
    Apple - Batteries - Maximizing Performance
    http://www.apple.com/batteries/maximizing-performance/
    I also understand that you are interested in performing a recovery mode restore. You can find information regarding recovery mode here:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Please keep in mind that restoring your backup may cause the issue to be restored as well. For the best isolation steps, you may wish to restore as new:
    iOS: How to back up your data and set up your device as a new device
    http://support.apple.com/kb/HT4137
    After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
    If the issue is still present, you may want to contact Apple Support.
    Thanks,
    Matt M.

  • I have an Iphone 4s from my work. Until 2 days ago, my iphone would notify me when I got an email or text. Now it does not notify me at all and some times it does not ring at all either. I have not changed any settings at all.

    My iphone just randomly stopped notifying me when I got an email, text or voicemail. Sometimes it will not even ring. I confirmed that the volume is turned on and I have not changed any settings at all. My software is up to date. In my job I need to know when I get an email without having to constantly activate the screen or open the email icon.
    Does anyone have any suggestions to fix this problem?

    First, is the Mute switch activated?
    Mute switch is above the volume buttons on the left side of iPhone.
    If you see red/orange color the the mute is ON.
    Also check Settings > Sounds > for New mail, Text Tone, etc.. have sound entries?
    If that's not the case try
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

  • While playing music on my iphone 5, i am now unable to play, pause, or skip songs while my phone is locked. I can still change the volume and slide the scrub through songs.  This has always worked for me until now. I have not changed any settings

    While playing music on my iphone 5, i am now unable to play, pause, or skip songs while my phone is locked. I can still change the volume and scrub through songs.  This has always worked for me until now. As far as i know, i have not changed any settings.  This is whle my phone is locked both on the slide up toolbar/menu interface and on the normal screen before i slide to unlock.

    I skimmed through this very long post but from what I read, this sounds much more like a coverage issue with your network than a device issue.  I have not seen or heard of this issue before and I do not have this issue personnally and & I use the music app quite frequently while working in the yard.
    The DND feature should not be a factor at all if you're sure it's turned off.  I always recommend restarting your phone by holding down the home button + the lock button for 10-12 seconds until the Apple logo appears.  Once the phone reboots, do a test to see if this has helped to resolve the issue.
    If not, go to Settings > General > Reset > Reset Network Settings.  Then, test it out again.  Post back if neither of these solutions solve your issue.

  • I just updated to 5.7 and the exported files are blurry. I compared the ones I exported before the change and they are fine. I have not change any settings.

    I just updated to 5.7 and the exported files are blurry. I compared the ones I exported before the change and they are fine. I have not change any settings.

    I don't understand your last paragraph.
    "The home page also has a full bar ..." What does "full bar" mean? " ... instead of the tray it had before."  What does "tray" mean?
    Anyway, you might try Settings > General > Reset > Reset Home Screen Layout
    I guess that cannot make things any worse.

  • Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't  reinstall the 2 missing programs. I want to install the softwares, therefore I down

    Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't  reinstall the 2 missing programs. I want to install the softwares, therefore I download those from here.  The downloaded program refuse to accept the serial number which was given to the school when they purchased the Master Collection CS4 MLP A00. Thank you for your help, in advance.

    Hi Jeff,
    Thank you. I am a little bit busy at work, sorry for the delayed reply. I tried to solve the problem, but it still exists. The 3rd of the Adobe disk is damaged someway. I tried to run on my mac at home and it has a failure. So I think we have no other choice that to download the full pack of master collection. I had a discussion with the IT expert and he figured out that company does not exist any more from where they purchased the Adobe Master Collection for Mac and PC. So If you would be kind to help me, what kind of information ID or any kind of document would be needed to identify the purchaser institute (us). I don't think any of us has an account at the Adobe. I will try to figur out. I desperately need to replace Photoshop and InDesign as without them it's really harsh to teach the kids fot the graphic design.
    Sincerely yours.
    Peter

  • I recently had to have a migration done. Since then I keep getting a message on my calendar: "The server responded with an error."   Its been asking me to check my ID and password, which I did not change.  What do I do to correct the problem?

    I recently had to have a migration done on my Mac Desktop. Since then I keep getting this message on my MacBook regarding my calendar: "The server responded with an error."   Its been asking me to check my ID and password, which I did not change.  What do I do to correct the problem?

    That's probably the MobileMe or iCloud password. 
    Go to System Preferences > Mobile Me (or iCloud).  If you're not logged-in, do so.  If you are, log out and back in again.

  • HT4009 Apple charged me £20.99 for in-app purchase for an app I just bought an hour ago while I did not bought any in-app purchase. How could I make claim and refund this money?

    Apple charged me £20.99 for in-app purchase for an app I just bought an hour ago while I did not bought any in-app purchase. How could I make claim and refund this money?

    If you didn't make an in-app purchase within the app then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
    You may also want to turn off in-app purchases via Settings > General > Restrictions > In-App Purchases 'off'

  • The RADIUS request did not match any configured connection request policy (CRP)

    I setup NPS server and added a RADIUS Client access point, my project is to get a wireless user to authenticate using his/her AD credientials, my problem is i can't seem to authenticate my user
    my NPS server is giving me this error log under Event Viewer > Server Logs > Network Policy and Access Services
        Reason:                The RADIUS request did not match any configured connection request policy (CRP).
    but from my understanding i don't need to setup Connection Request Policies because i am using Network Policy
    Please Help!

    thanks for your reply, i setup a new NPS policy here is my error log
    Network Policy Server denied access to a user.
    Contact the Network Policy Server administrator for more information.
    User:
        Security ID:            NULL SID
        Account Name:            csdomain\rsingh
        Account Domain:            csdomain
        Fully Qualified Account Name:    csdomain\rsingh
    Client Machine:
        Security ID:            NULL SID
        Account Name:            -
        Fully Qualified Account Name:    -
        OS-Version:            -
        Called Station Identifier:        0026.992f.6761
        Calling Station Identifier:        2477.0392.b0f8
    NAS:
        NAS IPv4 Address:        192.50.2.2
        NAS IPv6 Address:        -
        NAS Identifier:            MYWAP
        NAS Port-Type:            Wireless - IEEE 802.11
        NAS Port:            35290
    RADIUS Client:
        Client Friendly Name:        MYWAP
        Client IP Address:            192.50.2.2
    Authentication Details:
        Connection Request Policy Name:    PEAP
        Network Policy Name:        -
        Authentication Provider:        Windows
        Authentication Server:        MYSERVER.csdomain.com
        Authentication Type:        EAP
        EAP Type:            -
        Account Session Identifier:        -
        Logging Results:            Accounting information was written to the local log file.
        Reason Code:            22
        Reason:                The client could not be authenticated  because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server.

  • DST: the SQL Cluster did not change the time by itself..

    Hello,
    DST: the SQL Cluster did not change the time by itself..
    Where should I look for the issue. The time was changed manually to continue processing....
    Thanks,
    Dom
    System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

    Hi,
    Thanks for your posting.
    For the Sql cluster issue, i think you may ask in:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver&filter=alltypes&sort=lastpostdesc
    Regards.
    Vivian Wang

  • Emails received ok for over a year since buying ipad 2.Has not updated now for a month but had not changed any settings

    Why has my ipad 2 stopped receiving emails for over a month when I have not changed any settings

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    maybe this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • Error while deleting Exchangefaultdata and Exchangelogdata

    Hi, We are facing an error while activating, after deleting the Exchangefaultdata and Exchangelogdata. Please find the error message below : Activation of the change list canceled Check result for Data Type ExchangeFaultData | urn:xxxxxxxxxxxxxxxxxxx

  • How to save edited data Workbook in Excel Web Access web part?

    Hello All, I have one Workbook which is displayed on Excel Web Access web part in SharePoint 2013. If I edit data in workbook it is not getting saved. Am i missing anything here? please help. Thanks

  • How to use cookies in jsp

    Hi all, I'm new to jsp, please let me know how to use cookies with jsp. I have three web applications, in run time I have to switch from one application to another application based on single login page. I have taught cookies are one of the solution.

  • Javascript with checkboxes

    Hi, I am trying to use to javascript to control checkboxes so that when checkbox1 is selected, checkbox2 is deselected and vice versa. Only one checkbox can be selected at a time. I know this is fairly simple but I am a novice so I would appreciate s

  • Mac Pro with OS mountain lion working very slow

    I have a MacBook Pro with OSX 10.8.2. the mac is working very slow. It takes a lot of time to boot. Much longer than windows PC. Applications are also running very slow. How to speed up the mac and improve its performance? Plz help!!!