All of a sudden I cannot pan sounds left or right. All audio is centered.

I am using logic pro 7 and I tried panning my midi or audio files to the left or right and all sound it centered in the middle. I lost my ability to pan sounds. Any suggestions?

jonnystevens wrote:
I am using logic pro 7 and I tried panning my midi or audio files to the left or right and all sound it centered in the middle. I lost my ability to pan sounds. Any suggestions?
Maybe try looking at your mixer, see if the "mono" buttong is on. Or if you have a Digi002, that the "mono" button is active.
Cheers

Similar Messages

Cannot distinguish between left and right sounds IN EARPHONES. Please help!!

when i connect my earphone, i cannot distinguish between left and right sounds (which gives a plesant effect); both left and right sounds are same. Earlier it use to work fine. I realised about this problem when an app-3D audio illusion was was not giving proper sounds, and my ipod songs were also sounding dull. i hav removed that app, but still my ipod songs sound monotonous. I have tried using different headphones, but problem still persists. I am not sure wheather this is a hardware or software issue..PLEASE HELP!!

You're welcome. And thanks for marking question as solved.
Happy listening
Stedman

Panning from left to right speakers

We are presently having problems panning form left to right speakers. We have a t.c. Konnekt 6 midi interface and this is linked through an amp to speakers. By playing my guitar directly into the Konnekt 6, we can pan from L to R speakers whilst playing - no problem! However, when recording to GB, through the Konnekt 6, when panning from L to R, the sound remains constant through both speakers. We have checked and double-checked the settings in line with the text books - and also tried to mix and match settings - e.g. we have tried both stereo and mono in the "input source" and with the "monitor" setting at both 'on' and 'off' - yet we cannot find a combination of settings that allows us to record and then pan L to R.
Recording itself is fine - we can lay tracks, no problem. It is just the matter of being able to pan when it comes to mastering.
Can anyone help, please?????
Thanks

how have you connected the Konnekt 6 to the mac?
(btw, it's an audio interface, not a midi interface... that was a little confusing)

Panning from left to right only

Hi,
I have a still image that I imported into my iMovie project. I was wondering if there was a way to do a pan from left to right with no loss in image size (i.e. no panning into the image).
I suspect, having tried to work with the Ken Burns, Fit and Crop functions, that this is not possible. But was hoping one of the forum users had cleverly figured out how to do this type of panning.
Thank you!

Open Automator
Choose File>new
Highlight Image Capture Plug-in, then click Choose.
In the Actions Variables panel on the left, click Photos
In the panel that appears next to the Actions panel, scroll down to Pad Images (choices are listed alphabetically), highlight, click save, then name it and save
When you want to use this plug-in, open Image Capture (I keep the icon in the dock), then connect your camera.
Next follow File>Import>workflow saved as the Image Capture plug-in
Click import and the images will be 'padded' as they are imported.
Hope this helps you get started at least.

Sound - Left and Right Channels?

Alrighty, there's probably an easy way to do this, but I need help.
I have a video in which the sound was only imported in the left audio channel. I would like the audio to be played through both the left and right, rather than just the left. Even if it's just mono sound, I want to be able to hear it from both speakers.
Any help?
Thanks
Ziggy

Put the audio in the timeline, select the tracks or the clips, and press Control-period for pan center.

My ipod's music quality is inferior. It doesnt have the surround sound/ left and right audio channel unlike my brothers ipod? is there a problem with the chip?

I have an ipod touch 4g (8GB), I got this about 2.5 months ago, the same time my brother get his. My problem is that I noticed that audio quality is better on his device than mine. I have been listening to music and had different music devices before (non-Apple product and mobile phone) and the quality of music is better when I used to listen to those devices as well as my brother's ipod touch. Im referring to the left and right audio channels. Im not so good about the technical stuff but the best explanation I can give you is in a music or a movie, there's an effect wherein you can here a sound only at the left ear phone/speaker that you cant hear at the right earphone/speaker. I mean for example in a song, a guitar intro can be heared only at the left
ear while the background music plays on the other ear. Or when theres and echo effect on the song that alternates sound on the left and right ear. I hope youre getting what Im trying to say. Im bothered that my ipod is fake or has an internal problem on the chips or something because I didnt bought this at an Apple Center/Mac Center. I bought it on a retailer. I am not able to visit any store or Genius Bar or contact an apple specialist through phone because of my work schedule and work load. I have contacted the retailer before when I tried to return it for replacement or repair but he told me that it is under Apple's warranty, not theirs. I do hope that I can get a help from you because I want to really enjoy my device. Thank you and Im looking forward for the responce/assistance form you.

I suggest you don't apply pressure to the screen - it's a Touch - you touch the screen not push it.
Phil

When panning full left and right in logic pro 9, how can i stop one side from bleeding into the other?

I'm creating a Click track for live performance. I Have 3 audio tracks panned full left (-64) and a Click track panned full right (63) but when I play the track they bleed into each other. If anyone knows a way around this that'd be great

Eddie,
I just ran a test on my G5 Logic system (Logic 9.02) with an internal RME PCI 8in/8out Audio Card and I get perfect separation bouncing to a stereo audio file using standard panning. Click on one side and a couple of crunchy guitars on the other. Each side is completely separate.
So, it seems to point to your hardware unless you have some other audio routing that we've missed.
I'm re-doing my setup so I may try a couple of other tests as I go along.
pancenter-

Pan from Left to Right

I thought this was possible? Am I dreaming that I've done this before?

If you use the height of the image as the height of your image container (so the image is wider but not higher than its box), the panning will automatically be restricted to left and right. Is that what you were dreaming of ?

Problem panning to left and right channels

I'm trying to use GB3 to create click tracks for live performances. I put a click track in the left channel, and add instruments in the right channel. It sounds fine in headphones but when I export to iTunes there are no separated tracks. The click track and all instruments are in both speakers.
How do I keep the tracks separated in an MP3?

Need more info!
Fully describe your setup and process - are you recording into a USB or FireWire audio interface, using an external click track panned to one side while you record something through the other channel?
What do you mean "no separated tracks" - do you mean you expect different files for each track? Of course, GarageBand only exports one stereo AIFF to iTunes.
Are you saying that you've recorded tracks with hard panned material and when you export they are not panned correctly?

Trying to pan from let to right of a still photo.

I have a still image that I want the frame to slightly pan from left to right.
For example, the image is 1920x1080 and the actual viewing area is 1280x720 with the rest of the image unseen in the background.
I want to have the viewable area track from left to right a little bit just to give a panning effect.
Thanks

Keyframe animation (which is what you need for this project) is one of the very basic first steps to learn when working with After Effects. I highly suggest you either start here or start here and learn these basics before you try to go any further in AE.
Before that, another basic building block is creating compositions. You need to make one that's 1280x720.
And another basic skill is importing assets and footage (another basic building block), but I'm assuming you've figured this part out.
Basically, you need to animate either the position or the anchor point of your picture layer.

Left to Right Pan effect..

Hi,
Do anyone know how to create the Panning from Left to Right instead of using Automation on Pan (Automation need to Draw in every specific part)??

Hey Cooltempo,
NICE trick with the Tremolo — I've just spent about 20 minutes exploring possibilities. That will definitely beat the heck out of HyperDraw curves in lots of cases.
Then, sync to tempo -- I couldn't find it in the Reference. Could you please point out the path, or describe the process?
MUCH appreciated,
c

Suddenly, I cannot sync my Boselink with iPhone. Iphone 4s says Bose sound...not connected. I JUST updated software to iOS 6.1.3. Why isn't this working? I can not play pandora on my Bose.

Suddenly, I cannot sync my Boselink with iPhone. Iphone 4s says Bose sound...not connected. I JUST updated software to iOS 6.1.3. Why isn't this working? I can not play pandora on my Bose.

They are absolutely now paired after doing all you said, as I reset both the Bose Link and the Iphone. Now we have a pair, but no sound on the speaker or the iphone when they are connected. I know they are connected b/c the iphone says they are in the blue tooth setting AND the Bose has a solid blue tooth light on.
Now what? This is beyond frustrating and only happened when I UPDATED ios!
Thank you!

I have an iPad 2 and all of a sudden I have no sound in game apps. I have usual volume in videos and YouTube, I do get volume for games if I plug in headphones. I have switched to screen lock off and on again and I have also done a reset twice.....help :)

I have an ipad2 and all of a sudden I have stopped getting sound in my game apps. I get normal sound on YouTube and I player and downloaded DVDs. If I plug headphones in then I can get sounds for the games. I have switched the lock screen button off and on again and done a reset twice, can anyone help me with this?

Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
 Cheers, Tom

Microsoft Office 2004 (Word) unable to save files I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?

Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really.

I have been working on a book and have 418 photos already in my book. All of a sudden I cannot access the book format to see the multiple view, spread view, or single view. I can no longer see my book although I still see the collection with 418 photos

I have been working on a book and have 418 photos already in my book. All of a sudden I cannot access the book module and clicking on the multiple view, spread view, or single view does not take me back to the book I have been working on. I can no longer see my book although I still see the collection with 418 photos under collections. What I do see is a blank template for a new book and I can't find the unfinished book I started with 418 photos. It is like the new empty template is somehow covering it up. How do I get back to the book I have been working on?

Is it possible you mistakenly clicked on a [Clear Layout] button?
But a great hint is- Always click on the [Create a Saved Book] button, early in your new book design.
Then you have a permanent link to the book in the Collections panel. (In addition to the standard collection of your selected images)
Note: a Book Collection shows an icon that looks like a book.
Every time you come back to edit the book, open the Book Module by clicking on the white arrow that appears on the end of your Book Collection title. (The title as saved)
Re-opening a book without using the "Saved Book" option can have unpredictable results.
A "Book" Collection is like a "Smart Collection" because anything you do to the book design, change pages, change images, etc, is automatically updated in the Saved Book collection.

All of a sudden I cannot pan sounds left or right. All audio is centered.

Similar Messages

Maybe you are looking for