All of a sudden I have no sound on my PowerMac G4, also iTunes gives me an error code 0x666D743F, what is going on?
2 Days ago everything was working fine, today I turn on my computer and the only sound I get is at startup. I've tried loading iTunes and I get an apple error code 0x666D743F. I've tried checking the MIDI Audio setup and tested the right and left speakers and i get sound there, but nothing else makes a sound, no alert sounds, nothing. I'm confused, please help?
Thank you for the reply. I have tried resetting the PRAM and nothing. I have deleted pref files that might have something to do with the issue and again nothing.
I have done this so far:
1. Reset PRAM
2. Rebooted in safe mode with preference files deleted or moved from the Library (com.apple.soundpref.plist and om.apple.systempreferences.plist)
3. Done a virus, worm, trojan sweep - nothing
4. Made sure AUdio MIDI setting are as they should be ( although the speaker config option gives me sound from my speakers )
5. Defragged, repaired permissions, repaired disk etc...
6. Booted from OsX CD
Still no sound.
Should I wipe the drive and reinstall a fresh OS? Do you think this might help at all?
I am sure it isn't the soundcard hardaware or I wouldn't get a startup sound or sound at when I use the speaker configuration in AUDIO MIDI, right?
I'm frustrated! lol
Similar Messages
-
I have an ipad2 and all of a sudden I have stopped getting sound in my game apps. I get normal sound on YouTube and I player and downloaded DVDs. If I plug headphones in then I can get sounds for the games. I have switched the lock screen button off and on again and done a reset twice, can anyone help me with this?
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
Cheers, Tom -
Does these error codes mean that I have to replace my brand new phone. Should I go into Verizon, or take it straight to Apple???
It's possible there is a problem with the server you are syncing to. I'd wait a bit, try again a little later.
-
I have a 13 inch Macbook Pro. I have bought it just 5 months back. All of a sudden, i am unable to turn the mac on. It doesn't even get Charged. What could be the issue ?
If you're unable to turn it on, let alone even charge it then it definitely sounds like a battery issue to me. I'd wait for someone else to reply just to be sure but I think somehow the battery by the sounds of it must have died. However, I could be very wrong.
If you're still under applecare which you should be then it should be an easy free fix. Hope this helps! -
All of a sudden I have horrible coverage at home.
All of a sudden I have horrible coverage at home. Everyone says I sound like a robot but I hear them just fine. My wife is experiencing the same issue. iPhone 5 and 5S.
Thanks for the zip code FlashmanB. I totally understand your concern, I've been there myself, but working together will help get to the bottom of this. What happens when you use cellular data only? Does this happen only indoors, specificly in your home? How do other phones on your account function?
Furthermore, please clarify what the specific problems with service are in this case? You mentioned one bar of signal, how is that impacting calls, text or data?
AdaS_VZW
Follow us on Twitter @VZWSupport -
I was trying to sync my iPod when all of a sudden I have 6.9 GB of info under the section "other"
I was trying to sync my iPod when all of a sudden I have 6.9 GB of information under the section "other" and I don't know where it came from and because of it I can no longer sync my iPod because there is too much info to fit. How do I get rid of this random information which I can't find any cause for on my iTunes library? Most of my content is audio at 7GB, my video is at .14GB, and I'm up to date in my software, and I have searched my iTunes for this 6.9GB of information and can find nothing that is in there that shouldn't be in there, so where did it come from? Where did it go? And how do I get rid of it? I have a Mac OS X Version10.6.8
"Other" represents data that iTunes can't recognize. A few hundred mb of other is normal. The 6.9 gb you have represents corrupted data (maybe from an interrupted sync or some other glitch).
Sometimes, syncing one more song can clear up the extra other. If not, you'll need to restore your iPod. Here are the instructions: Restore: http://support.apple.com/kb/HT1414
You can restore from your iPod backup when asked. -
2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light
The power supply is shot. But that it lasted even this long is the wonder.. not that it died.
The TC runs too hot..
Look on ebay for "Time Capsule power supply"
You can get a replacement and fix it although the economics are not so good.. it is probably time for a new TC.
If you can DIY it is really only a few dollars worth of capacitors that go bad.
See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
For a bunch of alternatives. -
All of a sudden I have a box on the left of my screen with all my bookmarks in it. I can't find a way to disable this, and I would like to.
You can toggle the Bookmarks Sidebar on/off with Ctrl+B
* View > sidebar > Bookmarks
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily. -
Have in iPhone 4 that's not been ANY trouble in the last 18 months that I've had it, but all of a sudden it is not allowing me to connect to the iTunes shop at all. It's on ios7, and I've not tried to sync to my computer yet, but I thought I'd try here first
Hi there northwave8,
You may find the troubleshooting steps in the article below helpful.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
-Griff W. -
HT2513 all of a sudden I have duplicates of every entry on Ical. What happened?
all of a sudden I have duplicates of every entry on Ical. What happened?
See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages -
I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
All of the sudden my Messages app on my Macbook Pro is no longer syncing to my iPhone texts. What do I need to do to reestablish the flow between devices?
Associate your mobile number with your Apple ID, if you haven't already done so.
Sign out of iMessage on the Mac:
Messages ▹ Preferences ▹ Accounts ▹ Sign out
and on the iPhone:
Settings ▹ Messages ▹ Send & Receive ▹ Apple ID ▹ Sign out
Then, on the phone, tap
Use Your Apple ID for iMessage
Sign back into iMessage on both devices and test. If there's no change, you may have to wait for a change in network conditions.
Credit for this solution to ASC member SmittyLove and to Glenn Fleishman of tidbits.com. -
My kid down loaded mackeeper and now I can not get rid of it. I have tried all techniques suggesting on several sites and still can not empty the trash can. keep getting error code -8003. Help.
http://reviews.cnet.com/8301-13727_7-20020873-263.html
This should help you empty what's currently in the trash, but is no guarantee you got everything related to MacKiller off the drive. See Ogelthorpe's link. -
I have purchased two movies on the store that at the time were unable to download, due to a full start up disc. I have now freed up the space and the remainder of the movies won't download. It gives me the error code 8003. I have a good network connection and the space for the movies, but cant seem to get it to work. Anysuggestions? It doesnt even let me delete the downloads and start again.
1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
tt2 -
Error 3014 when trying to load ios6. I have cleared 2.5GB on the phone (4s) as it seems you need that ridiculous amount of space. Every time it just gives me 3014 error code within a minute of trying to download? Any help?
All,
I thought it may be related to spaces in the path in which the script was called from. I tried having the ODBC command script in another directory but the same thing happens. It will give me the "CONFIGSYSDSN: Unable to create a data source for the 'Oracle in OraClient10g_home1' driver: Could not load the setup or translator library with error code -2147467259". As soon as the script is done running I can manually double click the script and it adds the DSN fine.
Thanks,
Clif Bridegum
Maybe you are looking for
-
Settings for datasource 2LIS_02_ITM in R/3?
Dear Friends, I am preparing the datasource 2LIS_02_ITM in R/3 for data extraction and the SAP Library shows that there are some prerequisites for using this datasource. The following settings (as below) need to need to be made in R/3. Can somebody e
-
hi, i have a txt file...which i am reading in my jsp page using bufferedreader class, to read txt file i have to type the absolute path of txt file as c:/myproject/xxx.txt how can i access this txt file with relative path as xxx.txt instead of typing
-
Power button not working Yoga 11s
My yoga 11s went into sleep mode while plugged in sitting on my desk yesterday now the power button is not working. The light of the power button and the battery are on, but the screen will not turn on.
-
I use Adobe Acrobat 9 Pro. In my job I am responsible for training materials. I often convert pptx or docx into pdfs and never had a problem with images but now I do. PDFs show as being successful and everything looks good on the screen but once I pr
-
Encore CS4 problem uploading flash streams to remote ftp in build
Hi I'm working on a windows XP and trying to upload to my my remote server which has a new install of the Adobe Flash Streaming Media Server 3.5 as for Encore under build when creating a streaming flash I can't log into my ftp site, only to local fol