All of a sudden i'm getting the message wifi no hardware installed

All of a sudden I'm getting a message Wifi- no hardware installed

What hardware do you have installed?
All of it please.. and roles and function of each item.
ISP.. modem??.. main router?? .. AE of some sort?? ..
Have you reboot all of this and start up in correct order.. exactly as pictured above in exactly the sequence.. left to right. 2min between each.
If you installed Yosemite on your MBP .. welcome to the club.. networking is pathetic.
Reset the PRAM and whatever else.. wireless.. can be a total pain on Yosemite.

Similar Messages

My MBP suddenly shows the message Wifi: no hardware installed - Could you please help me?

My MBP suddenly shows the message - wifi: no hardware installed. Could you please help me?

try this help from Apple (is officially written for an older version of OSX, but goes for Mavericks as well.)
If that does not help, try this

I have had my iphone 5 for 13 months now and have always had the same car charger (not an apple brand). I recently downloaded the latest software update and now all of a sudden i keep getting the message that my charger isnt supported by my device.

Is there anyway to fix this problem? Im seriously considering getting away from apple as bad as I hate too. I love the apple OS but you can never get a hold of customer service, there is only one style of phone, and now apparently, you have to pay extra for "apple" accessories becasue others wont work.

Well I am having the same issue and I had not had to worry about getting a "licensed charger." The poster who responded offered not real insite and was rude to boot. I am also looking for the fix on this . My iphone will not even charge now on any charger. What the heck. I am not trying to treaten anyone either when I say I am frustrated with my iphone which in my case I have only had for a few months. I have already sent one in to be replaced and this is my second one. I have had troubles since the update GRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR .

HT203163 All of a sudden I'm getting a message Itunes has stopped working Data Execution prevention has closed Itunes what is causing this now, never had an issue until yesterday

All of a sudden I'm getting a message Itunes has stopped working Data Execution Prevention has closed Itunes. What is causing this now, never had an issue until yesterday

please sombody help me, apple support are no help, the shop are no help, the only thing i havent tried is delete everything on my laptop and put it back to factory, which is my very last resort

Why do I get the message "no SIM card installed"?????

Why do I get the message "no SIM card installed"?????

That will generally mean that your sim card is damaged and/or corrupted, or it may mean it is inserted improperly, may need to take it out and reenter, or maybe its gone for some reason, lol
Probably the first one. Hit up a Verizon corporate store and have them give you a free fresh one.

How do I install lightning1.0b1, I keep getting the message-could not be installed because it is not compatible with Firefox 3.6.10

I am trying to install lightning 1.0b1, I keep getting the message - lightning 1.0b1 could not be installed because it is not compatible with Firefox 3.6.10

The Lightning add-on is for Thunderbird and will not work on Firefox.
If you are trying to install it in Thunderbird see http://kb.mozillazine.org/Extensions_-_Thunderbird

I am unable to reinstall iTunes. I get the message it was not installed correctly. "Please reinstall itunes (Windows error 126)" Also get "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services."

I am unable to reinstall itunes. I get the message that it was not installed correctly. I HAVE DONE A SYSTEM RESTORE, I HAVE TRIED TO REINSTALL SEVERAL TIMES ALSO. I get a error message that it's "Windows error 126". Also get "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services."
Help!

Click here and follow the instructions.
(98993)

HT4313 once it has rebooted and entered the installation, i get the message "it cannot be installed on this computer", i have created a new Raid Set, ive zeroed out the disks, only 10.6 or 10.5 server is allowed

I can see the restart button mentioned, but i cant get past the message that it cant be installed when it has booted up with the 10.6.4 server installation disc.
So far:
Copied installation cd to a hard drive and booted from it.
Created new raid set (RAID 5)
Zeroed out information on disks
10.5 server had no trouble installing
10.6 sl had no trouble installing
I used to have 10.6 server installed on the intended mac pro.
However i need to reinstall and it is not possible.
Any help would be very much appreciated

Where did you get the 10.6.4 install disk? Did it come with some other machine?
I ask because it sounds like that's the case - and it may only work with the machine (or, at least, model) it was shipped with.
However, if you have another 10.6 Server install disk, even an older version, just go with that and run Software Update after it's installed. The chances are you don't really want 10.6.4 anyway, right, but something later.

I keep getting the message :No SIM card installed Insert a valid SIM with no PIN lock to activate iPhone - there is a sim in the tray in the phone...how do I fix this?

I have recently upgraded from the iPhone 3g to an iPhone 4, and I was going to give my 3g to a friend, but it comes up with the message as above, whenever the phone is turned on...
There is a sim card installed...
My carrier (virgin) say that they have unlocked the phone from optus.
How do I fix this?
thanks
Anushka

Virgin use the Optus network here in Australia - which is why, the 3G phones showed you connected to the Optus network, and not to the Virgin network...They don't have their own network, they piggyback on Optus - which is why it would show that it is locked to Optus!
They also said they would unlock my iPhone 4 - which has been done! So there's obviously something wrong with the phone...

When I try to download and install adobe flash, I get the message "Flash is already installed

Cannot install adobe flash. My system is Windows 7 professional 32bit

Thank you very muchy PAT,your solution worked perfectly,used the ADOBE un-installer as you said,and after that the flash player downloaded and installed no problem...thanks again...Dave
[private data removed]

All of a sudden I'm getting the hdcp error on my iMac

yeh on my imac not an external display

What hardware do you have installed?
All of it please.. and roles and function of each item.
ISP.. modem??.. main router?? .. AE of some sort?? ..
Have you reboot all of this and start up in correct order.. exactly as pictured above in exactly the sequence.. left to right. 2min between each.
If you installed Yosemite on your MBP .. welcome to the club.. networking is pathetic.
Reset the PRAM and whatever else.. wireless.. can be a total pain on Yosemite.

All of a sudden I am getting error message -42408 every time I open iTunes.

I have updated to the most recent version of iTunes and that didn't help. I can download iTunes items on my iPhone, but not my Mac. But I can see the iTunes store on my Mac. It just gives me an error and won't let me download anything OR let me sync my iPhone or iPad.

This may help
http://support.apple.com/kb/TS3297

I have several keynote presentations on my computer but now am getting the message that the program cannot be installed "because of a problem." All this started when I bought microsoft office for University (2011). What is the problem and how can I fix

I have several keynote presentations on my newish computer but am not unable to open them. I get the message "keynote cannot be installed because of a problem" (unspecified). Does anybody know why this happend? Does it related to using Microsoft "University" 2011? How can I fix it? Thanks!

Thank you for your reply.
I just tried the 3-step process suggested on http://support.microsoft.com/kb/2431353
This all started when my mouse/thumb clicker was going crazy. Found an expanded battery. Obviously need a new battery. Unfortunately must wait 6 weeks to get my new battery. Meanwhile, I'm running my computer on AC only, as there appears to be no other option. I was informed that when using AC only (no battery) some high-energy-use programs like Office might not function.
Do you know if there is away to use office even when just using AC and not having the battery in? I'm doubting if I have other OSX problems because everything else works: email, safari, itunes, iphoto, quicktime, etc . . . . ?
ciao,
Masego

I keep getting the message "the photo library was created with an unreleased version of iphoto. I have reinstalled but still get the message. What do I need to do?

I have had my iBook for years with iPhoto on and then suddenly today I get the message "The photo library was created with an unreleased version of iPhoto. Please quit and upgrade this photo library by opening it in iPhoto 2 or iPhoto 4. I reinstalled iPhoto but nothing has changed. What do I need to do to get it working again? Help!!

Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

When scanning I am getting the message invalid parameters CMD_Setwindow05:26:00

I have been able to scan just fine all day and then suddenly I am getting the message Invalid parameters CMD_Setwindow 05:26:00. I have restarted everything. I have disconnected and reconnected the scanner and so far nothing has worked.

Have you tired rebooting?

All of a sudden i'm getting the message wifi no hardware installed

Similar Messages

Maybe you are looking for