All of a sudden my 3 year old macbook pro screen is blurred - I can hardly read the words - any ideas?

All of a sudden the screen on my 3+ year old macbook pro has blurred badly - I can hardly read the words - any ideas?

You likely didn't erase the ENTIRE drive of the later OS X operating system before installing Snow Leopard. You just targeted the Macintosh HD partition.
Try again, this time make sure to select the name and size of your boot drive at the top to catch the hidden EFI partition that's responsible for the splash screen at boot time (no screen = white)
It will take two reboots to reset the EFI again, so once Snow is installed and reboots, reboot again.
How to erase and install Snow Leopard 10.6
How to revert your Mac to Snow Leopard
Restoring firmware on Intel Mac's

Similar Messages

My one year old macbook pro is full. : ( How can I see what's taking up all the GB?

My one year old macbook pro is full already. : ( How can I see what's taking up all the space? I cannot download anymore pictures. It's running slower than usual.

OmniDiskSweeper (free) - http://www.omnigroup.com/applications/omnidisksweeper/download/
Archive files onto other media until your hard drive has at least 10% of its total size free, or at least 15+ GB at all times.

My 1 year old Macbook Pro won't turn on and won't charge - no power light at all. Any suggestions?

My 1 year old Macbook Pro which ran out of warranty this month on the 3rd of June, won't turn on and when I plug in the charger, there is no charging light and it won't turn on. Can someone tell me what I should do? Has it died? It's only new! And I've never dropped it. Will I loose all my data? Help!

Try here > Troubleshooting: My computer won't turn on
And here > Apple Portables: Troubleshooting MagSafe adapters
Try the help from the suggestions above.
Hopefully it's nothing serious and you have a backup you can restore from if necessary.

I just upgraded to Maverick on my2 year old Macbook Pro and it has slowed down the computer terribly. All I see is that whirling circle every time I do anything. How do I go back to old OS. Terrible upgrade -- forces you to buy a new Mac!!!!

I just upgrade to Maverick on my 2 year old MacBook Pro and it has slowed down the computer terribly. All I see every time I do anything is that crazy circle going round and round. I don't recommend you upgrading. How do I get rid of it. I believe it forces you to buy a new macbook!!!!

It does not. First things first have you tried restarting?
Try restting PRAM
http://support.apple.com/kb/HT1379
Try booting up in Safe Mode
http://support.apple.com/kb/HT1455
Also open "activity monitor" and look and see what is using a lot of processing power.

HI there all, have got a 2 year old macbook pro that just recently wont start up. Even if I know the battery is fully charged. What I have to do is remove the battery, wait a minute or so, insert back in and it will fire up. Any ideas?

HI there all, have got a 2 year old macbook pro that just recently wont start up. Even if I know the battery is fully charged. What I have to do is remove the battery, wait a minute or so, insert back in and it will fire up. Any ideas?

Try the old two stand-by's first:
Reset PRAM, and;
Reset SMC.
If that doesn't help, call back,
Clinton

I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto '09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn't need it). I am totally happy with the

I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?

Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT

My 3 year old Macbook Pro is getting slow..

Hello, i have a 3 year old Macbook Pro which have been great use to me. When i first purchased it, the boot up time was extremely fast, and the general speed of the mac was superb. However 3 years later the machine take at least 3 mins to boot up and is pretty slow when i use it to carry out my daily tasks.
It originally came with Tiger but i upgraded to Leopard, basically i'm after advice on how i can increase the speed or how to make my mac as fast as it was 3 years ago. anyway help or information would be greatly appreciated. Many Thanks in advance.

Use a Utility like MainMenu or OnyX to clean out the caches, archived and temporary files.
Do a Parameter RAM reset - hold down apple/option/p/r keys at start up and wait for three chimes before releasing the keys.
Use Disc Inventory X to examine your hard drive and see a) if there's anything there taking a lot of space you can delete and b) that you still have 10%+ free space.
Consider doing a clean install of the OS and all Applications, it's a lot of work but is the one sure way of "starting over"

Hi, I have a 3 year old Macbook Pro 13" and I accidentally cracked the outer screen of my mac book, however the LCD panel is fine and works well. Please advise what to do

Hi, I have a 3 year old Macbook Pro 13" and I accidentally cracked the outer screen of my mac book, however the LCD panel is fine and works well. Please advise what to do. I live in India and I have gone to authorised Apple technicians and they infomed me that I will have to replace the LCD panel as well even though it is not cracked, is this really true or can I just change the outer shell? Also they say that they cannot do it in India... can I do it myself at home?

Since it is 3 years old find a local repair shop that can replace the glass Only. you may have to send it out to a Non Local shop for that but there are some that specialize in doiing that on Mac notebooks.
Apple will ony replace the complete screen enclosure with all normal parts included, LCD, Camera, Aluminum housing and glass as one unit. Which is very expensive. Or you could just use it as a desktop system with external monitor and buy a new notebook.

Is this 3+ years old MacBook Pro's HDD going bad?

Hello.
I noticed my client's 3+ years old MacBook Pro (15")'s HDD seems to have problems according to its Mac OS X 10.5.8's DIsk Utility. I also tried rebooting, but that did not help. Here's are logs:
2011-10-15 18:07:58 -0700: Disk Utility started.
2011-10-15 18:08:41 -0700: Verifying volume “Macintosh HD”
Starting verification tool: 2011-10-15 18:08:41 -0700
2011-10-15 18:11:40 -0700:
2011-10-15 18:11:41 -0700: Performing live verification.
2011-10-15 18:11:41 -0700: Checking Journaled HFS Plus volume.
2011-10-15 18:11:41 -0700: Checking Extents Overflow file.
2011-10-15 18:11:41 -0700: Checking Catalog file.
2011-10-15 18:11:41 -0700: 2011-10-15 18:11:41 -0700: Missing thread record (id = 3902449)
2011-10-15 18:11:41 -0700: Incorrect number of thread records
2011-10-15 18:11:41 -0700: Checking multi-linked files.
2011-10-15 18:11:41 -0700: Checking Catalog hierarchy.
2011-10-15 18:11:41 -0700: Invalid volume file count
2011-10-15 18:11:42 -0700: 2011-10-15 18:11:42 -0700: 2011-10-15 18:11:42 -0700: (It should be 683839 instead of 683840)
2011-10-15 18:11:42 -0700: Checking Extended Attributes file.
2011-10-15 18:11:42 -0700: Checking volume bitmap.
2011-10-15 18:11:42 -0700: Checking volume information.
2011-10-15 18:11:42 -0700: 2011-10-15 18:11:42 -0700: The volume Macintosh HD needs to be repaired.
2011-10-15 18:11:42 -0700: Error: Filesystem verify or repair failed.2011-10-15 18:11:42 -0700:
2011-10-15 18:11:42 -0700: Disk Utility stopped verifying “Macintosh HD” because the following error was encountered:
Filesystem verify or repair failed.
2011-10-15 18:11:42 -0700:
===== Saturday, October 15, 2011 6:15:08 PM US/Pacific =====
Console:
10/15/11 5:38:50 PM Disk Utility[279] **********
10/15/11 5:38:50 PM Disk Utility[279] Disk Utility started.
10/15/11 5:40:12 PM Disk Utility[279] Verifying volume “Macintosh HD”
10/15/11 5:40:12 PM Disk Utility[279] Starting verification tool:
10/15/11 5:42:56 PM Disk Utility[279]
10/15/11 5:42:56 PM Disk Utility[279] Performing live verification.
10/15/11 5:42:56 PM Disk Utility[279] Checking Journaled HFS Plus volume.
10/15/11 5:42:56 PM Disk Utility[279] Checking Extents Overflow file.
10/15/11 5:42:56 PM Disk Utility[279] Checking Catalog file.
10/15/11 5:42:56 PM Disk Utility[279] Missing thread record (id = 3902449)
10/15/11 5:42:56 PM Disk Utility[279] Incorrect number of thread records
10/15/11 5:42:56 PM Disk Utility[279] Checking multi-linked files.
10/15/11 5:42:56 PM Disk Utility[279] Checking Catalog hierarchy.
10/15/11 5:42:56 PM Disk Utility[279] Invalid volume file count
10/15/11 5:42:57 PM Disk Utility[279] (It should be 683842 instead of 683843)
10/15/11 5:42:57 PM Disk Utility[279] Checking Extended Attributes file.
10/15/11 5:42:57 PM Disk Utility[279] Checking volume bitmap.
10/15/11 5:42:57 PM Disk Utility[279] Checking volume information.
10/15/11 5:42:57 PM Disk Utility[279] The volume Macintosh HD needs to be repaired.
10/15/11 5:42:57 PM Disk Utility[279] Error: Filesystem verify or repair failed.
10/15/11 5:42:57 PM Disk Utility[279]
10/15/11 5:42:57 PM Disk Utility[279] Disk Utility stopped verifying “Macintosh HD” because the following error was encountered:
Filesystem verify or repair failed.
10/15/11 5:42:57 PM Disk Utility[279]
10/15/11 5:55:14 PM Disk Utility[279] Verifying volume “Macintosh HD”
10/15/11 5:55:14 PM Disk Utility[279] Starting verification tool:
10/15/11 5:55:14 PM Disk Utility[279]
10/15/11 5:55:14 PM Disk Utility[279] Performing live verification.
10/15/11 5:55:14 PM Disk Utility[279] Checking Journaled HFS Plus volume.
10/15/11 5:55:14 PM Disk Utility[279] Checking Extents Overflow file.
10/15/11 5:55:14 PM Disk Utility[279] Checking Catalog file.
10/15/11 5:55:49 PM Disk Utility[279] Stopped by user
10/15/11 5:55:49 PM Disk Utility[279] Verifying tool completed:
10/15/11 5:55:49 PM Disk Utility[279]
10/15/11 5:55:49 PM Disk Utility[279]
10/15/11 5:55:53 PM Disk Utility[279] Verifying volume “Macintosh HD”
10/15/11 5:55:53 PM Disk Utility[279] Starting verification tool:
10/15/11 5:55:53 PM Disk Utility[279]
10/15/11 5:55:53 PM Disk Utility[279] Performing live verification.
10/15/11 5:55:53 PM Disk Utility[279] Checking Journaled HFS Plus volume.
10/15/11 5:55:53 PM Disk Utility[279] Checking Extents Overflow file.
10/15/11 5:55:53 PM Disk Utility[279] Checking Catalog file.
10/15/11 5:58:32 PM Disk Utility[279] Missing thread record (id = 3902449)
10/15/11 5:58:32 PM Disk Utility[279] Incorrect number of thread records
10/15/11 5:58:32 PM Disk Utility[279] Checking multi-linked files.
10/15/11 5:58:32 PM Disk Utility[279] Checking Catalog hierarchy.
10/15/11 5:58:33 PM Disk Utility[279] Invalid volume file count
10/15/11 5:58:33 PM Disk Utility[279] (It should be 683843 instead of 683844)
10/15/11 5:58:33 PM Disk Utility[279] Checking Extended Attributes file.
10/15/11 5:58:33 PM Disk Utility[279] Checking volume bitmap.
10/15/11 5:58:33 PM Disk Utility[279] Checking volume information.
10/15/11 5:58:33 PM Disk Utility[279] The volume Macintosh HD needs to be repaired.
10/15/11 5:58:33 PM Disk Utility[279] Error: Filesystem verify or repair failed.
10/15/11 5:58:33 PM Disk Utility[279]
10/15/11 5:58:33 PM Disk Utility[279] Disk Utility stopped verifying “Macintosh HD” because the following error was encountered:
Filesystem verify or repair failed.
10/15/11 5:58:33 PM Disk Utility[279]
I noticed DU said to try rebooting with the disc, but I can't find that DVD so I will need to use a third party. I thought about using smartctl, but it has to be done through Fink. I don't want to have to download, configure, etc. it since this might make the HDD issue worse. I already ran TimeMachine and a manual backup copy of the profiles (data only).
What else can I try? Thank you in advance.

BDAqua wrote:
Laptop drives do die earlie than others, but you may need to just repair it...
Tough without the Install disc, but some things to try...
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
Thanks! I just started that command. This might take a while? Is there a way to log all the results just in case? So far, it says "Miss thread record..", "Incorrect number of thread records (4, 36436), Invalid file count should be 63849 instead of 68348, etc.

I killed my computer with coffee. It's out of waranty and applecare has run out. It's a 4 year old Macbook Pro. Any idea whether it makes sense to try and fix it?

I killed my computer with coffee. It's out of waranty and applecare has run out. It's a 4 year old Macbook Pro. Any idea whether it makes sense to try and fix it?

Nothing works at all. When I spilled the coffee I shut it down, unplugged everything, turned it over and put paper towels beneath it to drain. Made the mistake of turning it back on after a couple of hours. It worked but emitted strange noises from the internal speakers. Turned it back off, but have not been able to turn it back on since. I disassembled the entire macbook yesterday, found coffee stains on the keyboard components. Tried to turn it on and get nothing. The only sign of life is the battery indicator. When I press the button the series of green lights come on, but that's it. Thanks for your responses. Jaylloyd

I just tried to wake up my 4 year-old MacBook Pro after perhaps an hour of inactivity, and it just 'pinwheels' and won't restart. HELP!!!!!!!!!

I just tried to wake up my 4 year-old MacBook Pro after perhaps an hour of inactivity, and it just 'pinwheels' and won't restart. HELP!!!!!!!!!
Semi-experienced user - Western New York.
System was operating nominally until I opened it from 'sleep' mode after ~1 hour of inactivity.
No idea what's going on. I had just installed a Flash Player update [not an atypical occurrence] at ~6:00 PM this evening, but used the system without incident after that. Re-Start attempt does not appear to succeed, the circular pre-OS icon never clears and displays the authorization screen.
Anyone with an idea how to help would be greatly appreciated. We have so much personal and business data on this machine!!!
Thanks!
Jim F.

Press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly to restart.
The fact that you're worried about the data implies that you have no backups, or that you don't have confidence in your backups. Your first priority must be to back up all the data you intend to keep. Ask if you need guidance.

The trackpad on my 4-year-old Macbook Pro barely works anymore. It moves around by itself sometimes, can't scroll, etc. Is there a way to fix this?

The trackpad on my 4-year-old Macbook Pro is completely screwed up. It moves around by itself sometimes, can't scroll, randomly freezes etc. Is there a way to fix this??

Portables and Magic Trackpad: Jumpy or erratic trackpad operation

Why is the internet faster on my 3-year-old Macbook Pro than on my iPad???

Though I love my iPad, I am puzzled why surfing the web is so much slower on the iPad than on my three-year-old MacBook Pro. I have a cable modem and an airport extreme. Loading the same pages on Safari, the MacBook is much faster than the iPad. Is this normal? Could something be slowing down the connection to the iPad?
Thanks!
Steven

Even a 3 year old MacBook has 4 times the CPU power and about ten times the RAM of an iPad.
You can run speed tests on the iPad and make sure that you don't have a connection problem.

My 3 year-old macbook pro is very slow. I have run disk utility and virus scan with no improvement. The "beach ball" will spin for minutes at a time when opening, closing or changing windows. Apple Store looked at it a few months ago with no help.

my 3 year-old macbook pro is very slow. I have run disk utility and virus scan with no improvement. The "beach ball" will spin for minutes at a time when opening, closing or changing windows. Apple Store looked at it a few months ago with no help. What can I do?

Under CPU: 3.5% user; 5% system; 91% idle; 441 threads; 90 processes.
Under System: out of 2GB - 54.7MB free; 530MB wired; 603MB active; 862MB inactive; 1.95GB used.
Is too much of the system memory tied up? If so, what can I do to free some up?

Have a 2 year old macbook pro that won't turn on--logic board?

We have a 2 year old Macbook Pro that will not turn on. A computer repairman said it's probably the logic board. Does Apple warrant that or are we just out $1,700?

When you attach the power adapter, does the led light up? If so, what color?
What happens if you press the external battery check button?
Have you tried a SMC reset?
http://support.apple.com/kb/ht3964
Have you had it evaluated at an Apple store genius bar or an AASP?
Ciao.

All of a sudden my 3 year old macbook pro screen is blurred - I can hardly read the words - any ideas?

Similar Messages

Maybe you are looking for