All of a sudden Safari is automatically  launching loud and annoying ads.  How can I stop this

Annoying and loud ads are popping up and playing automatically in Safari.  How can I stop this?  I have 8.0.5 and OS 10.10.3

There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Similar Messages

  • When importing raw photos from Nikon D90 aperture seems to automatically adjust exposure darker. why? How can I stop this?

    When importing raw photos from Nikon D90 aperture seems to automatically adjust exposure darker. why? How can I stop this?

    This is typical of the default NEF RAW conversion of Aperture and the best thing you can do is set up a few presets to apply to all of your RAW images to get a tone curve and colors that is pleasing to you as a default. The in camera JPEGs / embedded JPEGs (that you first see during import) are treated to the Nikon "Picture Control" settings that are set on the camera - the RAW's as interpreted by Aperture are not.
    I have written extensively and even have a few downloadable presets on my site - look for NEF...
    http://photo.rwboyer.com/
    RB

  • I uploaded to Maverick and now my mail always cc's me on every email I send out. I have checked Preferences and the Composing Automatically CC button is unclicked. How can I stop this?

    I uploaded to Maverick and now my mail always cc's me on every email I send out. I have checked Preferences and the Composing Automatically CC button is unclicked. How can I stop this?

    Sounds like your phone has the jitters.
    This is sometimes caused when a DLL fle is missing when you restore, so the ipsw pacakge wasn't installed corectly.
    You could back up and restore, but if it doesn't help go to http://www.felixbruns.de/iPod/firmware/ and then download the same firmware your on.
    Open up iTunes and hold Shift+Restore and select that firmware, you can't use anoy ther firmwares though.
    Hope this helped

  • Whenever I download an app on my iPad it automatically downloads it onto my iPhone - how can I stop this from happening?

    Whenever I download an app on my iPad it automatically downloads it onto my iPhone - how can I stop this from happening?

    Automatic Downloads...
    http://support.apple.com/kb/ht4539
    Settings > Store > Automatic Downloads > Music/Apps > Off

  • Ive been using the same ipod and same account for awhile now and all of a sudden my itunes account doesnt recognize my ipod anymore. how can i fix this problem without deleting my ipod and resyncing?

    can somebody explain to me why my itunes library wont recognize my ipod anymore. and can somebody help me fix it without having to delete all 951 of my files and resyncing it?

    Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
    Come back with the results.
    An "other" larger than about 1 1/2 GB indicates corrupted files.
    What is the Other on my iPhone and How to Remove It
    What is "Other" and What Can I Do About It?
    Also, go to Settings>General>Usage>Manage Storage and see what is using the storage

  • Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
    1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
    2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
    3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
    4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
    5. Reset the System Management Controller.
    6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
    7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
    8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to  behave erratically. If you're using such an adapter, disconnect it and test.
    9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
    10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
    11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

  • When i open a new tab, it closes 3 seconds later automatically. how can I stop this?

    When I open a new tab, I cannot view it, the tab closes automatically. I then reload the tab and it closes again after 3 seconds. How can I stop this? I never had this problem before.
    == This happened ==
    Every time Firefox opened
    == About two weeks ago, 2nd week in June 2010

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • When i open safari the bookmarks page pops up.  how can i stop this from happening?

    when i open safari the bookmarks page pops up.  how can i stop this from happening?

    Under the older iOS, when you opened a blank Safari page, Bookmarks automatically opened. However, with the newer iOS, this does not happen anymore. What iPhone and version of iOS do you have?

  • HT204053 Our family uses one Apple ID for all of our iPhones.  We installed the update and now we are all getting each others photos and texts.  How do we stop this?

    Our family uses one Apple ID for all of our iPhone 5's.  We installed the update and now we are all receiving each other's pictures and texts.  How do we stop this? 

    Have a look here...
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

  • When I click on a link in an email I get the following message at the top of the screen: "Firefox prevented this page from automatically redirecting to another page...[Allow]. How can I stop this?

    When I click on a link in an email using gmail in the Mozilla brower, I get the following message at the top of the screen:
    "Firefox prevented this page from automatically redirecting to another page...[Allow].
    How can I stop this?

    # Press Alt+T
    # Select Options
    # Select Advanced Panel
    # Select General Tab
    # You will see option "Warn me when websites try to redirect or reload page"
    # Uncheck it as given in the screenshot.
    <img src=http://dl.dropbox.com/u/7456129/Firefox/advancedgeneraltab.jpg width=600px height=600px>
    ''<hr>Note: If anyone's reply has solved your problem, then please mark that reply as "Solved It" to the right of that reply after logging in your account. It will help us to concentrate on new questions.''

  • I synced by ipod touch with itunes and it wiped all my music.  Now itunes does not recognise my ipod.  How can i fix this?

    I synced by ipod touch with itunes and it wiped all my music.  Now itunes does not recognise my ipod.  How can i fix this?

    Here
    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Mac OS X
    Does the iP{od work OK
    Does it charge when connected?

  • When I open iTunes or even change a preference, iTunes scans through all of my apps. How can I stop this?

    To get straight to the point, whenever I open iTunes or close a pop-up from iTunes, it starts scanning through my collection of applications. This has slowly got on my patient nerve. It wasn't always this was. Before I transfered all my data from my Mac to Pc, it worked fine. So I am wondering what is it doing, and how can I stop this. Bare in mind I have alot of apps. Thanks in advance for the help!
    Sincerely,   
         Tarellano

    You can only use the German iTunes/App store if you are located in Germany.  The German store is in the German language.

  • My 4s is now copying me on all my texts. How can I stop this?

    My 4s is copying me on all my text messages.....how can I stop this?

    Unfortunately I no longer have an iPhone 4 to check but on my iPhone 5 this works.  Go to Settings->General->Accesibility->Incoming Calls.  Ensure you select "Default" and not "Speaker".
    I hope this helps.

  • When i open a new site on safari it always opens a new window with ads how can i stop that?

    when i open a new site on safari it always opens a new window with ads how can i stop that?

    Follow the instructions in the Apple article below.
    Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support

  • On the zynga game, mafia wars, every time i click on something within the game a get a popup that says "Requested URL not found: 400" all pages load fine it just gives the message every time i click something, how can i stop this?

    on the zynga game, mafia wars, every time i click on something within the game a get a popup that says "Requested URL not found: 400" all pages load fine it just gives the message every time i click something, how can i stop this?

    Sorry, the above thread should have been a "new" post, not a reply post.

Maybe you are looking for

  • How can i verify my MacBook air 13 mid 2012 by my serial no?

    Hey guys! This is swapan. I'm new in this community. And also I'm new user of MacBook air. Recently I've got a MacBook air 13 mid 2012. That's serial no is C02KG11JDRVG on it's back physical part and also in about this mac option. It shows it has cor

  • Error while loading shared libraries: libsqlplus.so

    Hi After upgrading from 11.1.0.6 to 11.1.0.7 on linux. I get the below error: cd $ORACLE_HOME/bin ./sqlplus ./sqlplus: error while loading shared libraries: libsqlplus.so: cannot open shared object file: No such file or directory There was no error m

  • Classic music DVD import to DVDSPRO?

    Hello every one. I have a lot of music videos with opera, symfonic music and so on. I want to make one dvd with the "best" tracks and use it for my students. How do I import this tracks to DVDSPRO or Final Cut Pro? Do I need a A/D converter or is it

  • Converting String type to inte type

    Can any one tell me how I can convert an array of Strings into an array of integers??

  • Print Properties Buton Won't Open

    I want to print a coupon online & when I go to File, Print, Properties, the Properties Button is Enabled & Highlights but the window won't open??? Please help! Thank You! ;-)