All of my audio is out of sync:(

Hey,
Everything was fine now all my audio is out of sync. Anyone know why? The delay is about 1.2 second or so but is quite noticeable. Can this be fixed in Soundtrack?
Chris

thanks for the follow up. Anyone searchinf for iMac and FCP issues will find your thread. It's important and helpful because I don't know anyone around here who could have even GUESSED to change an iMac to AV mode. Never used FCP on such a machine.
bogiesan

Similar Messages

Audio/video out of sync (audio delay) with PowerBeats wireless earphones.

I am having a problem with audio/video sync between my PowerBeats Wireless earphones with my MacPro and MacBookPro. I have tried pairing, playing the video, pausing the video, turning off the PowerBeats, tuning the PowerBeats on, then starting the video playback again. I have the same audio delay so this not working for me. Anyone have an update as to how to fix this audio/video sync problem?

I am playing MPEG-4 movie files. I did open MPlayerX from my dock, then pulled down File to select Open which then did show the folder where these movie files are stored. Then I was able to select a movie file, open it, and use "Decrease Audio Delay" to closely sync the audio with the video. I say closely because it is not perfect. Rather than stepping each increase or decrease in one tenth of a second, perhaps a finer adjustment would have been in milliseconds. This is the adjustment that I have with my AVR to sync the audio with the video, so I know this is a possible increment adjustment. The perfect adjustment was in between -0.4 and -0.5 second,however, this was not possible in one tenth second adjustments. The closest adjustment was with -0.4 second rather than with -0.5 second. So, adjustments in milliseconds could have been very near a perfect sync. Perhaps later versions of MPlayer will offer the adjustment selection in milliseconds. Nevertheless, this is working much, much better than before. Thank you so much. I have spent most of this day researching this problem and you have come up with by far the best solution. This problem goes all the way back to 2010 and possibly beyond for Apple products. There are hundreds of reports documenting out of sync audio/video issues with no solution that works as well as MPlayerX. Even the Beats support staff have no idea of how to resolve the audio/video out of sync.

Audio video out of sync?

Every movie I have rented and purchased the audio is out of sync with the video. If I pause the movie sometimes it goes back into sync but doesn't last long before it goes out of sync again. I have been trying to resolve this issue for the past week. I have turned off everything on the computer that manages audio, made sure all drivers and software is up to date. I have uninstalled itunes and reinstalled. I've set itunes and windows bit rate the exact same and nothing seems to fix the problem. I am running Windows 8 on a new Samsung laptop, previously I was using a Gateway laptop with no problems. From my reasearch the past couple days i see this has been on on going problem with itunes users and I hope someone has a fix. I just rented a movie from Xbox Video and it worked perfectly. I think I am going to have to make the switch to Xbox but I have movies I have downloaded to itunes and would like to watch them.
Any help would be appreicated.

Hello bjwilson22,
I was researching the symptom you describe and reocmmend this article named Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues found here http://support.apple.com/kb/ts1718
It is pretty length, but also thorough and I feel has the best advice to help troubleshoot the issue.
All the very best,
Sterling

Audio goes out of sync when i open project on diff macs

i have an iMovie project created on an iMac saved to an external.
I go to open the project up on my macbook and the audio is out of sync.
I go back to my iMac with the same project and it works just fine.
I'm a bit confused because both macs use Mac OS X 10.6.4 and iMovie 8.0.6
what other differences might there be?
any input is appreciated as I'd love to work on projects while out in the field!

Try exporting the iMovie project as a single full quality dv format quicktime file.
I use iMovie6 HD and this is my usual procedure that works well.
Make the movie in iMovie, will involve many separate clips. When finished, export (share) as a single full quality dv format quick time file. When I have an hours worth of smaller projects, I create a new iMovie project and import all of the quicktime .dv files for each separate short project. I add chapter markers in this project, then share with iDVD. I then burn an hours worth of stuff at best quality and distribute to family and friends.
iDVD seems to work better with iMovie source that has fewer clips.
BTW: Are you having problems with standard def or hi def iMovie source. Another part of my procedure is that I take the raw tapes and download the entire thing into one iMovie project. I don't edit or change the footage at all, just want to archive to DVD for posterity. In this case, I want to share the iMovie project with iDVD directly. This has worked OK for standard def projects, but my first hi def project (1080i) that I tried, the sound was out of sync. To fix this, I had to create a regular DV widescreen iMovie project, and drag all the clips into it from the HD project. It took over an hour for my humble mac mini to convert the files, but I was then able to share with iDVD and the finished DVD worked ok.
Hope this helps.

Why does my audio slip out of sync when exporting?

I am exporting an HD edited video. I shot 1280x720 & editing in FCP 6.0.5. I am using APPLE PRO RES 422 1280x720 30fps 48kz . Should it be (HQ)?? - I do not select re-compress all frames or make self-contained. I just want a QT reference file to view and then burn a DVD. My clip is 43 minutes long. HOWEVER, the audio drifts out of sync BIG TIME. Why is that??
Here are my sequence settings:
1280x720 Aspect Ratio HDTV 720p (16:9)
Square Pixels
H.264
Audio at 48kHz

That's what I thought, however, when I play back the .mov file after exporting using "current settings", that's when I experience OUT OF SYNC audio. Do I ignore that and drag and drop that file into iDVD and let iDVD crunch it??? Is it just the playback of that .mov file that is out of sync?

When I use media manager to upres clip audio goes out of sync

I captured a clip and put it in DVNTSC 48kHz timeline at OfflineRT NTSC (Photo JPEG) then used the media manager to create a new sequence at full DV NTSC 48kHz res. I choose "Create offline", "set sequences to DV NTSC 48 kHz", and check all the boxes. I save a new project, open the new timeline and recapture the clip. The video looks great--it recaptures in full DVNTSC 48kHz res. But the audio is out of sync (by about 28 frames it looks like). What am I doing wrong? (This is the first time I'm trying this offline-then-online-process.) thanks.

Try exporting the iMovie project as a single full quality dv format quicktime file.
I use iMovie6 HD and this is my usual procedure that works well.
Make the movie in iMovie, will involve many separate clips. When finished, export (share) as a single full quality dv format quick time file. When I have an hours worth of smaller projects, I create a new iMovie project and import all of the quicktime .dv files for each separate short project. I add chapter markers in this project, then share with iDVD. I then burn an hours worth of stuff at best quality and distribute to family and friends.
iDVD seems to work better with iMovie source that has fewer clips.
BTW: Are you having problems with standard def or hi def iMovie source. Another part of my procedure is that I take the raw tapes and download the entire thing into one iMovie project. I don't edit or change the footage at all, just want to archive to DVD for posterity. In this case, I want to share the iMovie project with iDVD directly. This has worked OK for standard def projects, but my first hi def project (1080i) that I tried, the sound was out of sync. To fix this, I had to create a regular DV widescreen iMovie project, and drag all the clips into it from the HD project. It took over an hour for my humble mac mini to convert the files, but I was then able to share with iDVD and the finished DVD worked ok.
Hope this helps.

N95 Recorded Video: Video and audio is out of sync

Audio and video is out of sync when I play videos recorded with N95 on my PC. If have used different PC applications to play the video, but all exhibit the same problem.
In the beginning of at video it seems that the audio is about 400milliseconds ahead of the video - you hear the sound first. The different in audio and video is not constant. In a long video (30-50minutes) it is quite unpretictable how video and audio is out of sync in the end.
To experience the problem yourself record a long video sequence with a N95.
1 .Record something where it is easy to see if video and audio is in sync.
2. Transfer the recording to a PC.
3. Play the recording using VLC (www.videolan.org)
Another way to experience the problem is to convert the recording to AVI format at play it in MediaPlayer or WindowsMovieMaker. To convert a N95 video recording to AVI format use Mp4Cam2Avi.
http://sourceforge.net/projects/mp4cam2avi/
The video recording settings I use on my N95 are:
Best Quality
No Video Stablisation
Firmware version 21.0.0.16.
I think the video quality of N95 recordings is quite good, so I would really like to be able to view and edit the recorded vidoes on my PC.

28-Mar-2008 09:50 PM
el_loco wrote:
I've seen this issue, but it's not so critical for me. It doesn't happen 100% of the time or in most situations it's very hard to see.
You can edit videos on your PC, just converting them to AVI then using any Video Editor on the PC.
Yes while editing separate the audio channel from the clip and reinsert at the begining of the clip. This will minimise sync issues.To get accurate sync increase the timeline so that you are able to the see audio squiggles as a waveform.
If my post has helped you please click the white star on the right

Exporting to HD - audio is out of sync

Hi
(I'm using Elements 4 and Vista.)
I've completed my video and all looks great on preview and in timeline - however, when I export to the HD (whether it's windows media or mpeg etc) the audio is out of sync? It seems to be in slightly different places too...
(I have rendered etc).
Any ideas?
Many thanks
Z

It's most likely related to your source video. This is especially common with video captured by a program other than Premiere Elements.
What type of video files are you using as your source -- what kind of camcorder did they come from and how did you get them into your computer?

After Bad Frames Audio is Out of Sync

One of my HDV video clips has a few bad frames and after that point all the audio is out of sync, but only within Premiere Pro CS4. When I play the clip in Windows Media Player, all the audio remains in sync after the bad frames. I opened the clip in CS3 and the same problem occured. How can I get it to play in sync within Premiere, like it does in Windows Media Player?

I have the same problem with CS5 and some source video I captured off air. Strangely enough, in one instance I had 2 corrupt frames but the audio survived the problem, but in another case, the audio stream became noise. Hopefully someone will answer this question on how to fix this in Premiere. As you point out, media players seem to have no problem dealing with the missing information.

Captured audio is out of sync

I captured a 12 minutes clip using Capture Now in FCE 3.5 from my PAL camcorder Canon MVX4i (=Optura 600).
This is the first time it happens to me: the captured clip has the audio portion out of sync with respect to the video by 5 frames. So, the audio is consistently 5/25 fps = 0.2 seconds late during the whole clip. Unfortunately, this is quite visible when people are speaking.
As a workaround I set the clip in the timeline, unlinked the audio, shifted the video portion forward by 5 frames, marked the clip in sync and relinked (BTW it took me a while to find out that 5 was the right value: lot of tests adding and subtracting a frame at the time, and listening ...)
I doubt the cause is the camera, so my question is: what is the cause of this out of sync ?
Thanks
Piero
Some additional info.
I used the same setup I've been using so far: camera directly connected to the iMac, capture to an external firewire hard drive, use of Capture Now just because it's faster with short movies. Tha movie was shot with 16 bit audio. The shift is the same all along the clip.

Hi Ian,
I'll check tonight once more, just to be sure. I doubt though, because being aware of the possible impact of the 32KHz, I am usually careful. But I also know that editing after 11 pm is not recommended to me... I might do silly mistakes...
In any case, I'm afraid there is a problem with the tape. Could a damaged tape causes out of sync during capture ?
Thanks
Piero

My audio goes out of sync after import

I have a bunch of masters of 1h documentaries that I've done using Adobe Premiere CS6. I've exported the masters using exactly the same specs:
Apple Pro Res 422 (HQ), 23.98fps, 1920x1080p, 48kHz, 16b, PCM audio.
I have to do some changes on the masters of these shows. They all play fine on several players like VLC, Quicktime, Mpeg Streamclip, etc. However after I import the masters into Premiere Pro CC, 3 out of 10 shows get the audio gradually out of sync, even on the source monitor before I put them on a timeline. The behaviour continues even after I place them on a timeline.
The project settings are the same as the masters and so are the sequence settings. I've tried to recreate the project, delete and re-import, duplicate the file and import that, and no matter what I do the same 3 masters go out of sync after the import.
I've tried to find a solution in many forums and despite noticing that several people have the same issue, no one has a valid solution for my problem.
I cannot go back to CS6 since my company updated their systems to CS7 so I can't even cross check.
Any suggestion will be most welcome.
Thanks in advance peeps.
NJ

Couple of suggestions.
First, rather than opening the Master export, go back to the original project. That should open fine in CC.
Second, with a CC subscription, you do have access to the full CS6 suite.

Audio is Out of Sync withVideo!

Anyone know how to correct that the audio is out of sync with the video when playing back a movie in the Video app? The movie was an included download to iTunes that came with a Disney Blueray we bought. My daughter doesn't notice it of course but I did. What's up?

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings

Audio is out of sync after capture.

I'm attempting an firewire capture from a DV source. When I'm logging clips and previewing them, the sound is fine, but when I view them after capture the audio is out of sync. I think I'm having timecode issues, is there any way around this?

I tried watching them in the timeline and viewer, all out of sync. No external monitor. I did get a message once about dropped frames and something else, it said I might have these issues, but it didn't tell me to change settings, just told me it was gonna happen, lol. So, I don't know where to start to fix it.

Audio drifts out of sync since Quicktime 7.6 update!

Help!
Seems like ever since i updated the Quicktime to 7.6 my uncompressed 8 or 10 bit sequences for playout to digital betacam drifts out of sync over time!
But when i just go to the end of the sequence and hit play, everything seems fine.
I just restarted to my old Tiger system and there the problem doesn't seem to be there.
Any ideas??
I use the blackmagic Multibridge Extreme.
Another strange thing is that when i playout to HD, there is also no problem!
Thank you for your time,
Steve Pittoors

I have had my audio drift out of sync also, not with Betacam, but DV. I basically send the audio from FCP to STP and tweek the audio, and then on export back to FCP it adds about 10 frames worth of audio. It starts in sync and then drifts by the end of the sequence. I have had no problems with shorter sequences - ie. 30 sec. The one I am working on now is just over 6 minutes. What is weird is that the sequence length in both FCP and STP are the exact same, but when I export back it drifts and adds in the extra frames.
I tried fiddling with all the framerate settings in STP and it still does it.
I posted last night in FCP and STP forums and haven't had any luck.

Audio Drifts Out of Sync After Demux

Hi,
I demuxed an hour-long program from DVD to .m2v and .ac3 using MPEG Streamclip. The audio drifts out of sync very gradually, and by the end is way off.
I don't want to re-compress the audio, as it is already AC3. According to Quicktime, the video is 29.97 fps, and the audio is 16-bit 48 khz.
When I used to Export to DV option, everything stayed in sync. I can't go this route, however, since I can't afford to re-compress anything (I'm making a new DVD from this old one). Just an FYI that this worked.
Ever run into this problem before?

I am using version 1.9. In the preferences pane, I don't have anything checked.
To reiterate, all I'm trying to is demux the DVD as-is and bring those assets into DVD Studio Pro for an updated project. Not using FCP anywhere in this workflow.
Looks like I left out an important piece of info, though...When I demux the audio stream to AC3 (its original format), and try to import it into DVD Studio Pro, I get the error message: "Variable bit rate audio assets cannot be imported." I am not sure how the client originally encoded their audio, but the fact that it stays in sync on the DVD led me to believe they didn't do anything wrong. Could this VBR be throwing the audio off during the demux? The only instances where I've noticed it's out of sync are when I export to an uncompressed format like AIFF or WAV, and can actually view it.

All of my audio is out of sync:(

Similar Messages

Maybe you are looking for