All of my task bar buttons are grey
All of my Taks Bar buttons are grey and I only have graphite an blue in the Appearance Prefrences window to choose from.
Correct - what you have described is normal for Lion.
Lion removed a lot of color from auxiliary icons, such as those in the Sidebar and those in toolbars. It's a shame, because clor can be a quick aid in finding the one you want quickly - it's a very good visual identifier.
Re Appearance in the General pane of System Preferences - Blue and Graphite are the only choices offered in Lion.
Similar Messages
-
Firefox loads to a blank page, not my home page. When I click on the home button it takes me to the home page. The back, forward, refresh and stop buttons are greyed out and not usable. The webpage I am on does not show up in the address bar. If I type something into the address bar, that address stays there no matter what page I go to next.
Just upgraded to v4. It did NOT fix the problem.
-
SRM Confirmation - All buttons are greyed out
Hello experts,
I have seen posts on similar isue but could not find one which was relevant.
Here is my problem.
I see that after a confirmation is created, when I go back into "Display and Process Confirmations ", all the buttons are greyed out. The header statuses for the confirmation are as given below.
Complete
Confirmed
Created
Approved
Currently Being Transferred
I am not sure why it says "Currently Being Transferred", when its actually posted in the backend.
All clean up and update jobs are running fine. I am on SRM 5.0. I even tried the program to regenerate BBP_DOCUMENT_TAB entries.
Please help incase you have experienced this or know the solution to resolve this problem.
Thank you.
Thanks and Regards
Manish MohanHi Manish,
Did you manually run the update reports CLEAN_REQREQ_UP and BBP_GET_STATUS_2 without any document numbers?
So there is no entry in BBP_DOCUMENT_TAB for this document?
You mention that the document has been created successfully in the backend?
Did you check the status of the IDOC in both EBP and the backend?
Nevertheless I have an Info for you - If you debug the program
clean_reqreq_up you may find out that the corresponding IDOCs within the
backend system are never found by the FM
B46A_GOODSMVT_UPDATECHECK - this FM is called within the program
clean_reqreq_up with the parameters:
object_ident-objkey = IS_DOCUMENT_TAB-OBJKEY.
object_ident-objtype = 'IDOC'.
object_ident-logsys = sender_logsys.
where the OBJKEY is the IDOC number within EBP-System.
Because the corresponding IDOC is never found in the backend system
(the return code from backend system is always 1 - object not found)
all confirmations get the status I1019 (Transfer Error) and stay hang
in the table bbp_document_tab in the QSR-system and also alert message
is created for them.
The question is why is it not possible for this FM to found any IDOC in
the backend system even when there are posted there...
this FM is called within the program where the OBJKEY is the IDOC number
within EBP-System.
where the OBJKEY is the IDOC number within EBP-System.
Because the corresponding IDOC is never found in the backend system
(the return code from backend system is always 1 - object not found)
all confirmations get the status I1019 (Transfer Error) and stay hang
in the table bbp_document_tab in the QSR-system and also alert message
is created for them.
So if there is no entry in BBP_DOCUMENT_TAB, maybe, regenerage another one and run this in debug mode and recheck.
Hope this helps,
Kind Regards,
Matthew -
My camera app won't work, all the buttons are grey when I open the camera
when I open my camera, all the buttons are grey so that I can't take a picture, turn on flash, etc.
I can view my pictures taken but that's it.
have restarted it numerous times, no success.
thanks for your help.Hello there, Johnmr88.
You might want to close out all apps first and foremost:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Then it might be worth attempting a restart of the iPhone, and then a reset, should that not resolve the issue.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the Camera app is still showing greyed out then you may want to try restoring the iPhone.
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
Red, Yellow and Green button are grey. "Show All" button disappears
I'm having two issues that I can not figure out.
First the red, yellow and green buttons are grey not colored. They still work but they do not show the correct color.
The second problem is that the "Show All" button in system preferences is not visible until I float over the are where it should be. The button still works but is not visible.
I can not figure out what happened or if the two situations are related.
Any thoughts?
-RichNot sure on your other issue yet, but here's a suggestion for those buttons.
Open System Preferences and click the Appearance option. Is it set to Graphite? Switch to Blue.
I'll see if I can find a solution for your other problem as well!
Edit: Can't hurt to try removing the preferences file and see if that fixes things.
Click *Macintosh HD*, then Users> Library> Preferences. Delete--or move to the desktop--the com.apple.systempreferences.plist file. Restart your computer. Any changes?
Try another user account as well to see if the button reappears.
~Lyssa -
ITunes will not install any (downloaded) apps: the install buttons are grey.
I have installed iTunes 12.0.1.26 on my (up-to-date) Windows 7 64 bit machine. I have successfully downloaded several apps from the app store. Now I would really like to install those apps on my iPhone 4s iOS 8.1.2, but iTunes wil not allow me to do so (nor on my iPod). It recognizes my iPhone, it shows me my apps, but the 'install' buttons are grey (i.e. they are not clickable). I have authorized my computer and installed iTunes as an administrator.
I searched this site and found a solution to a similar problem, but unfortunately that solution will not work here. The solution was to double click on one of the apps in 'my apps' and then authorize my computer, but when I double click on an app nothing happens at all. Well, it gets selected (blue), but that is all. So iTunes just isn't working properly, but I don't know how to correct it.
I really hope to get some help with this problem. Thanks in advance!Ah, not sure what I was thinking at time.
You may want to try some of the troubleshooting steps in iTunes repeatedly prompts to authorize computer to play iTunes Store purchases. It may help to deauthorize and then reauthorize the computer. I suspect the double-click the app advice doesn't work with iTunes 12. Nothing interesting happened when I tried. If you have any protected media it might be worth confirming that it will play.
Is this a new library with respect to the device? If so see Recover your iTunes library from your iPod or iOS device.
tt2 -
Bookmark Bar buttons are messed up.
I use Safari 5 on my Mac and on Windows. For some reason my bookmark bar buttons are all squished on my Windows S5 so that the names on the buttons do not show properly.
Is there a way to fix this? Is there something like an INI that I can delete that would reset the button sizes on the bookmark bar? I hope this does not happen on my Mac as well.
The machine where I am seeing this unfortunate behavior is a Windows XP SP 3 based system with all other updates applied to it as needed. So I don't think I am missing at patch or something along those lines.
I have also tried removing my bookmarks.plist file and the com.apple.safari.plist file both of which where in my profile folder and this did not help either.
If anyone else has seen this behavior and knows how to resolve it. Please let me know. Otherwise, I really like the new Safari, just need this one issue resolved.Below is a link to a screen capture of my bookmark bar.
http://gallery.me.com/rorwessels#100033/BookMark%20Bar%20in%20S5%20on%20Win%20XP &bgcolor=black
Below is a link to full screen capture also showing the bookmark bar.
http://gallery.me.com/rorwessels#100033/Full%20S5%20Screen&bgcolor=black -
I have just transferred my iTunes library from a hard drive previously connected to a windows laptop to a MacBook Pro and now all my options for editing info are greyed out. I have seen the answers if still using windows but could find a similar situation to this one.
Eels290776 wrote:
if my external hard drive is not connected to either of my machines, and I download something onto my iMac and then something different onto my Macbook, where are my machines going to be storing the new downloaded media
when the drive is not connected, +iTunes media folder location+ will default back to <MacintoshHD>/users/<yourname>/music/iTunes/iTunes music (or media)
and when I next connect the external hard drive how will I easily get the newly downloaded media onto the external HD
you'd have to point +iTunes media folder location+ back to the external via preferences > advanced > iTunes media folder location, then file > library, organize library > consolidate files
and essentially, to have it easily readable on both machines?
in that case it might be best to copy the entire iTunes folder to the external. then, on each machine, launch iTunes while pressing option on your keyboard. when prompted, click on +choose library+ and navigate to the iTunes folder on the external.
note only one iTunes can access the iTunes library @ a time !
also, make sure the external is mounted on either machine before launching iTunes.
JGG -
In "my Documents" my back/forward buttons are grey, & inactive. Joe
when I open "My Documents" the back/forward buttons are are "grey" & non-responsive, how can I retreive them? Joe
Thank you Ken,
it still dose'nt solve my problem, if I open folders + folders to file, I still hav'nt Back or Forward = still grey & inactive, yet funny in Veiw=toolbars & to costomise, they're there green & active, but I can do nothing to solve my problem So so, what do you think? Joe
Seosamh Ó hAghmaill
Date: Tue, 3 Apr 2012 12:50:42 -0600
From: [email protected]
To: [email protected]
Subject: In "my Documents" my back/forward buttons are grey, & inactive. Joe
Re: In "my Documents" my back/forward buttons are grey, & inactive. Joe created by Ken Binney in Dreamweaver - View the full discussion
Welcome Joe -
PC or Mac?
Back and forward buttons on a window listng the files in it, will only work if you open a file within the folder.
If you simply open your folder, there nothing to go "back" to.
HTH
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4310848#4310848
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4310848#4310848. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
As the title states everytime I boot up my mini mac the 'go back' and 'continue' buttons are greyed out and I cannot continue with the installation. I even went out and bought an external cd drive to try and load the operating system and that did not work either.
Hi, what OS version is it? And which year Mini?
-
Email does not appear when using the mail icon on the home screen. I get No message selected showing on the rh side of my screen with the left hand third of the screen blank. Buttons on the top line are greyed out except the new mail one. The word thread appears in black on the top left hand side of the screen The only way out is to close the screen. all other apps work okay.
Hello calverone,
Thanks for using Apple Support Communities.
To start troubleshooting this issue where the Mail application is not appearing correctly on your iPad, I'd like you to please force the Mail app to quit, and then restart your iPad.
iOS: Force an app to close
Turn your iOS device off and on (restart) and reset
Have a great weekend,
Alex H. -
The Function Buttons are Greyed Out in Numbers
I am new to Numbers having used Excel for years. I am trying to add up a column of figures but when I highlight the column and click the 'Function' button at the top of the page, all the functions are greyed out so not usable. Can someone tell me what I am doing wrong?
I am using Numbers 3.1, downloaded on Saturday.
Thanksclarie,
select multiple columns, then drag the quick sum tag or use the formula:
=sum(<RANGE1>, <RANGE2>, <RANGE3>, ...)
where <RANGE1> thru <RANGEn> are any valid ranges
e.g.
=sum(A:C) will sum columns which would be the same thing as:
=sum(A, B, C)
you can also sum rows 1, 4, and 7 like this:
=sum(1:1, 4:4, 7:7) -
Scroll bar buttons are missing
scroll bar buttons, arrows at the top and bottom of the scroll bar in the Thunderbird inbox, are missing in a linux distrobution. They are present in windows XP. The version is 24.6.0. How can I get them back?
I do not have any linux system, but located this item:
re; openSUSE
http://opensuse.14.x6.nabble.com/Scrollbar-arrows-inT-bird-and-FF-td4999329.html
scroll down as this person fixed the same issue you seem to be experiencing.
Also Linux REdhat Fedora:
http://comments.gmane.org/gmane.linux.redhat.fedora.general/424758
quote:
''In my case, something during the upgrade to f17 has changed xfce's
Appearance/Style to using Adwaita-style. This style lacks arrows
on scrollbars and therefore hardly usable in scenarios like yours or mine.''
''Changing 'Appearance/Style' to a different 'style' through
Application Menu>Settings'>Appearance->Style
brought back the arrows.'' -
Just installed Acrobat XI and many of the tool buttons are greyed out.
This is Acrobat Standard. Why would the edit buttons be greyed out?
LeeIt could be that the document you're working with doesn't allow editing, which could be due to security restrictions that are in place, because it's a form created wit LiveCycle Designer, it's locked due to a digital signature, etc. See what it shows when you select: File > Properties > Security
-
Hi there,
Does anyone know how (if possible) to increase the width of the tasks that appear in the Windows taskbar?
As LabVIEW prepends the library name to all VIs I often have quite a few similar looking tasks in the taskbar (Windows truncates the text)
This leads me to trying to keep the library name as short as possible, not really what I want to be doing.
I have a nice wide monitor, and I make the task bar double height, it would be nice to be able to stretch (or set) a minimum width for tasks. Then I could see the whole VI name (or at least more of it), unlike the situation I am dealing with now, as shown in the screeny
Also, I really wish they would change the icon to differentiate between block diagram and front panel! (I know I should have actually filled out a product suggestion years ago...)
holding thumbs!
nrp
Message Edited by nrp on 06-05-2008 10:40 AM
nrp
CLA
Attachments:
tasks.png 4 KBI'll bet there is a legacy dll somewhere that can be fiddled with, but as an easier alternative which may be useful is an XP 'power toy' It replaces the alt-tab select with a screenshot and full name of the window instance, and you can move your mouse over each item - which is quicker than alt-tabbing through them all :-)
power toys
About half way down, it's called alt-tab replacement / Taskswitch.exe
Message Edited by yenknip on 06-05-2008 11:42 AM
- Cheers, Ed
Attachments:
alt tab.PNG 37 KB
Maybe you are looking for
-
ITunes is not opening for no apparent reason
My iTunes won't open anymore. I don't know what's wrong. It was working fine yesterday and now it just bounces in the task bar. I tried to update it but an "unexpected error" occurs every time. Similarly, I tried to download it offline and I got the
-
Using Reader 11, unable now to add text in a document where it worked before
Yesterday it worked, today it doesn't
-
CREATE OR REPLACE PROCEDURE dq_setAllCollOptionsForColl (srcCollId INT, s
CREATE OR REPLACE PROCEDURE dq_setAllCollOptionsForColl (srcCollId INT, collId INT) AS BEGIN INSERT INTO dq_spidering_options SELECT collId, id_type, file_types, file_extns, sub_directories, max_files, min_file_size, max_file_size, protocols_to_fetch
-
I too rely on reading my sons text messages and feel that as long as I am paying the bill my son has no privacy. Sometimes I just want to look at the messages at my convenience and not by the availability....
-
Connect to unix server through java
Hi All, I've seen this topic being discussed here, but I want to clarify my situation. I'm a college student, so our school provides us accounts to a unix server. I am writing a java program that needs to connect to this unix server owned by the scho