All of sudden Safari can't open servers.

Safari which has so far worked well, now can't open links, I keep getting "Safari can't open server" messages.
I haven't downloaded any Flash upgrades, the only upgrade I downloaded was the latest itunes.

Reboot the computer.  If you have already rebooted the computer, use the network setup assistant to diagnose your network problems.

Similar Messages

  • Why is my iPad suddenly not opening the Yahoo home page? I get a message saying Safari can not open the page due to too many redirects. This started yesterday. I shut my iPad down and still no luck.

    Why is my iPad suddenly not opening the Yahoo home page? I get a message saying Safari can not open the page due to too many redirects. This started yesterday, and I have already tried shutting off my iPad.

     

  • I have Dreamweaver CS5.5 and all of a sudden I can't open it says XML parsing fatel error.  Invalid Document Structure  What do I do?  Thanks

    I have Dreamweaver CS5.5 and all of a sudden I can't open it says XML parsing fatel error.  Invalid Document Structure  What do I do?  Thanks

    You need to rename the Configuration folder to Configuration_BU.
    The folder can be found by following this http://www.dmxzone.com/go/16740/clearing-dreamweaver-s-cache/

  • HT5037 All of a sudden I can't open my iPhoto library.  I get a message that says "To open your library with this version of iPhoto, it first needs to be prepared.  It takes me to this page.  Bought MacBook Pro 11/2012.  Don't have a clue as to version of

    All of a sudden I can't open my iPhoto library.  I get a message that says "To open your library with this version of iPhoto, it first needs to be prepared.  It takes me to this page.  Bought MacBook Pro 11/2012.  Don't have a clue as to version of IPhoto

    Is this library one that you've been using since you bought the MBP?  If so and you're running iPhoto 9 then apply the two fixes below in order as needed: 
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with
    Option #3, followed by #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • All of a sudden I can't open my raw photos in lightroom 4, how come?

    All of a sudden I can't open my raw photos in lightroom 4, how come?

    BethGoetz wrote:
    I'm having the same problem but I think it's because I need the version of RAW. The only upgrade info I can find is for CS5.  I have Elements and Lightroom 4.  How do I get the updated RAW version?
    Lightroom has Camera Raw built in.  You can't upgrade it.  Just upgrade to the latest version of Lightroom.

  • Safari can't open specifics web sites

    i'm having troubles to re-open some web sites visited earlier.
    I'm on a macbook pro with leopard and safari 5.0.1, all updates installed
    Example: www.tgcom.it
    The first time opened without any problem, the second time can't open again.
    after typing the address and hit the return key, safari display immediately (without even trying to load the page) the white page with the alert:
    Safari can't connect to the server.
    Safari can't open the page “http://www.tgcom.it/” because safari can't connect to the server “www.tgcom.it”.
    I've try already to reset Safari and clean the cache. No changes.
    On the same network I have an iMac, which is loading this page anytime without any problem.
    As well a windows PC is on the same home network, the page can be loaded too.
    Only on this macbook pro i'm experiencing this issue.
    I don't know what to think more..... the problem can't be the web-site (it works with other machines)
    Other web sites on the macbook are working properly, only three address seams to be blocked from this machine only....
    any suggestions???? thanks
    Marco

    I suspect it has something to do with your ISP.
    Adding Open DNS codes to your Network Preferences, should give good results:
    If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
    208.67.222.222
    208.67.220.220
    (You can also enter them if you click on Advanced and then DNS)
    Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
    http://support.apple.com/kb/TS2296
    If your computer is part of a network: please refer to this page: http://www.opendns.com/start/bestpractices/#yournetwork and follow the advice given.

  • Safari can't open certain pages, can't find the server

    Hi
    On both my iMac and iOS devices (all connected to same Airport TimeCapsule Wi-Fi network), certain web pages won't open in Safari (specific example www.amazon.co.uk).
    Safari returns the message "Safari can't open the page "www.amazon.co.uk" because Safari can't find the server "www.amazon.co.uk"".
    Opening other pages works fine.
    Have tried Safari option "Clear History and Website data" (all history) without success. Have also tried rebooting the TimeCapsule (disconnecting power cord), also without improvement.
    When trying to connect to the same website over 4G on iOS device, no problem occurs.
    Can anyone help me?
    All software on all devices are updated to latest versions.

    Back up all data.
    Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
              8.8.8.8
              8.8.4.4
    That's Google DNS. Click OK, then Apply.
    In Safari, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. If you’re using another browser, empty the cache. Test. Any difference?
    Notes:
    1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the  Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click Apply in order for any changes to take effect.
    2. I don't use Google DNS myself, though I have tested it, and I'm not recommending it or any other DNS provider; the server addresses are offered merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

  • Periodically "safari can't open the page" - not a ISP issue

    Periodically I will have an issue where I click on a link and anything from the website cannot be opened for about 2 minutes. I get the following message "Safari can’t open the page “https://xxxxxxxxxxxxxx/” because Safari can’t find the server “xxxxxxxxxxxxxxxxx”."
    Here are some important notes:
    I can access the website on my phone while the issue is occurring on my macbook pro
    I can access all other websites
    The issue lasts for about 2-3 minutes and all webpages with that address will not work
    Any thoughts how to resolve the issue?

    (Presumably you regularly empty your Safari cache by deleting the following file:  Home/Library/Caches/com.apple.Safari/cache.db and also clear your History)
    One reason for a slowness in page loading may be the 'DNS Pre-fetching' feature of Safari 5.x as is described here:  http://support.apple.com/kb/TS3408?viewlocale=en_US
    You can cancel DNS pre-fetching by going to Terminal and typing:
    defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
    You have to restart Safari for it to take effect.
    If Safari seems to hang for ages:
    If you have a lot of tabs open and/or a lot of pages running Flash, Safari can sometimes 'hang', requiring a restart of Safari. This can often be inconvenient, and as it is rarely Safari itself that is hanging but merely one of its plug-ins, usually Flash, there is a way using Terminal to restart the plug-ins (without restarting Safari and losing your tabs) by quitting the WebPluginHost process:
    Open the Terminal from the Utilities folder in /Applications and type  killall -9 WebKitPluginHost
    Note that this command kills all Safari plug-ins, not just Flash. All plug-ins should start back up when you reload the page. Then go back to Safari and refresh any pages that were using the Flash plug-in. This also fixes the Beachball of Death. Try this whenever Safari gets slow or freezes. The latest versions of Flash 10.1 and later appear to have improved the situation somewhat, but haven't completed eliminated it.
    For this and other reasons Apple switched their websites to HTML in January 2011:  http://www.appleinsider.com/articles/11/01/26/apple_revamps_its_public_website_u sing_html5.html
    The main reason I mentioned your ISP is that their servers may be too busy, which is why I suggested Open DNS.

  • "Safari can't open the page because it can't find the server"

    I just bought my iPhone. The first time I attempted to log onto my home wireless network (US Robotics Wireless Router) the iPhone performed perfectly. However, the next time I attempted to logon and surf it gave me the "Safari can't open the page because it can't find the server" error message. I tried a variety of things which didn't work. I called the Apple Tech Support. Turning off the router and rebooting it was the only thing that worked. I thought my problem was resolved because after cycling the router the iPhone worked great once again. But . . . later the same day I attempted to connect to the router and the same thing happened and I got the error message. I attempted to power cycle the router just like before but this time it did not work! Help! Bad router? Wrong settings on router or iPhone?

    Do you have other wireless devices connected to this same router? Do they work?
    I really can't help you much but to say that when my router exhibited this issue it was accross the board (all notebooks would connect immediately following a router restart, but would loss connectivity until I rebooted the router again). In my case the only solution that was permanent was to replace the router.
    You may also try restarting the phone and the router, setup security - WEP - (or disable security) on the router and phone, and/or try a different wi-fi channel (may actually help).

  • Haveing problems with Safari. It gives me an error message. Safari can't open the web page, because it can't establish a secure connection to the server. It only seams to have a problem on https sites. Any help would be apreciated.

    Safari keeps giving  and error message. " Safari can't open the web page( insert web page here) , because it can't establish a secure connetion to the server.
    It only seams to have a problem with https sites.
    Any help would be appreciated

    The "s" in "https" indicates the site is a secure server--usually a site that will require a password.  Connections to secure servers can be blocked by parental controls.  Are you using any parental controls, either through OSX's settings (in System Preferences) or third party parental control software (such as Netnanny)?  If so, check the settings to make sure they will allow the connection.

  • You are not connected to the internet - Safari can't open the page

    After wake up Mac OS X 10.6.8 from sleep, Safari 5.1.7 on Ethernet does not connect to web servers:
    "You are not connected to the internet" "Safari can't open the page"
    The issue disappears after restarting the Mac. Is there a way to fix it besides restarting?

    Some instructions for removing Community Toolbar are available in this thread: https://discussions.apple.com/message/15868085#15868085

  • Safari Can't Open Webpage

    I am using Safari at my home comuputer (Dell, Windows XP). I recently installed it within the past two weeks. Just this Sunday, I noticed that there are several pages that I haven't been able to view and the same message "Safari can’t open the page “https://cavs.bpcc.edu/” because it couldn’t establish a secure connection to the server “cavs.bpcc.edu”" pops up, except it uses the current URL.
    What is wrong? Anyone have any suggestions because I prefer Safari to IE7.
    Thanks

    According to the URL you posted, there's a link on that page for "Browser Requirements", though it looks as though it hasn't been updated in quite some time. Here what it says they support:
    To access Student Self-Service, your computer must be equipped with a browser capable of rendering HTML 4.01 and running JavaScript. The following browsers are known to be compatible:
    Windows browsers:
    Firefox 1.5.0.1 and 2.0
    Microsoft Internet Explorer 6.0 and 7.0
    Mozilla 1.7.12
    Netscape 7.2 and 8.1
    MAC OS 10.4 browsers:
    Firefox 1.5.0.1 and 2.0
    Netscape 7.2
    MAC OS 10.3 browsers:
    Firefox 1.5.0.1
    Mozilla 1.7.12
    Netscape 7.2
    Assistive Technology:
    IBM Home Page Reader 3.02
    JAWS 5.0
    In your browser, you must enable:
    JavaScript (required for drop down menus)
    SSL (Secure Socket Layer)
    So if they don't support Safari, try downloading Firefox instead, and send them some email about their need to support Safari 3.x (a fully standards-compliant browser) for you and all other users immediately.
    Mulder

  • IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?

    My IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?

    Try this:
    1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
    2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo.

  • Safari can't open select pages

        My 5 year old 1.87 iMac is having issues where I get the "Safari can not open page" screen on certain sites. So far it's YouTube, Google, and Facebook. And, the content of Yahoo and Flickr pages all gets shoved to the left of the screen. Shutting down the modem temporarily fixes it, which leads me to believe this might have been caused by the latest Comcast (my provider) security change which forced me to contact them to activate. Their tech help has had me try a million things, but no permanent fix. BUT I wonder if this is related to having installed OS 10.6.3 just days prior to this mess. Does anyone have any ideas?
    BTW- I have emptied the Cache and reset Safari many times. Neither has made a difference. Only the modem shutoff has helped (as I said, briefly). Thanks!

    From the Safari menu bar, select
    Safari ▹ Preferences ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
    If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.
    If you don't get results from that step, continue.
    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins and log in as Guest.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Iphone 4 error message while in wifi "safari can not open page because server stopped responding" after iOS6 update

    I am currently using my Iphone 4 in wifi networks only after canceling my cell phone plan. Over the weekend I did the IOS6 update on the iphone as well as updated my macbooks itunes and OS X operating systems updates that were available.  Since that my iphone's safara app won't connect.  After it trys to connect for a minute or 2 I recieve the message: "safari can not open page because server stopped responding".  However ALL other apps that require the phone to be connected to wifi for use work properly, i.e app store, imessage, pinger, facebook, etc.  I have checked all network setting and they looked right to me.  Anything I'm missing, ideas to try, or am I sol (lol)?  Safari worked perfectly before the update so I thought I might have done something wrong or forgot to change some type of setting.
    Thank you!

    If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier.  You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.

Maybe you are looking for

  • Is true that I need to charge my ipod 5G 12 hours for the first time?

    Is true that I need to charge my ipod 5G 12 hours for the first time? Help me please

  • POPULATE_TABLE

    Hi, the forms procedure POPULATE_TABLE is automatically invoked within the block trigger (QUERY-PROCEDURE) when querying procedure based blocks. This procedure fails when an empty recordset is returned. To aviod this error, in these cases I return a

  • Revoking roles in a trigger

    I am trying to revoke a role in a DB level trigger. I am using 'execute imediate' to do this. I have also tried to do it the old fashioned DBMS_SQL.PARSE way. When the trigger fires I get this error: ORA-04092: cannot COMMIT in a trigger. I understan

  • How to cut and paste photos

    I am trying to open a photo and cut out certain parts of it and then paste them together...this may be a silly question but new to mac and need to know what app works best. I am not trying to make greeting cards or anything crazy just simple images o

  • Kill Session option is not rac aware?

    Connected to a RAC db, tried to kill session but SD kept complaining that session doesn't exist. It seems it shows sessions from gv$session but while issuing kill, it assumes session on local node. Would it not be possible to enhance the kill to use