All page breaks are converted into section breaks

Hi,
In my template in ms word 2007 I have page breaks and section breaks. When I generate the output what I see is that all the page breaks are automatically converted into section breaks. Is this a bug ? Or is there a way to solve it.?
Thanks

Hi elic elico,
Are your page breaks created by inserting multiple returns? If so, then the script will certainly remove them. You can "fix" this by deleting the relevant line from the text file. In general, however, it's better to control page breaks by other means.
Thanks,
Ole

Similar Messages

I have Iphoto '09, version 8.1.2 (424). I am having an identical problem. All my pictures are imported into Iphoto when I downloaded them from my camera. Until recently, I thought that the pictures were actually saved in the library. Since I need to cr

I have Iphoto '09, version 8.1.2 (424). I am having an identical problem. All my pictures are imported into Iphoto when I downloaded them from my camera. Until recently, I thought that the pictures were actually saved in the library. Since I need to crop my pictures for the web, and Iphoto doesn't do that, I purchased Photoshop Elements to do that. To my surprise, when I try to get a picture from Iphoto to Photoshop, it can't be done. That was when I realized, after wasting a lot of time, that the photos are not in the Iphoto library.
I started naming the pictures on Iphoto so I had a recognizable file name to open on Photoshop. Couldn't find it. I looked in the Backup folder and the Transfer software folder (I have a Nikon camera), and the names I entered in the Iphoto display, could not be found.
When I am trying to upload a photo to the web, I get the Finder folder showing with an active folder called "Photos" under "Media", which only displays Iphoto and PhotoBooth. This is a folder name that I cannot find in my HD anywhere when I look for it. If I edit a picture with Photoshop, I am not going to save it back to Iphoto (not sure whether it will work properly). How do I get my folder of edited photos to show when I want to upload a picture to the web?
Where (the name of the folder) do I find the pictures I see displayed on the Iphoto library, including any name changes, keywords added, and so on?

See my response to your other post.

I dw file.dwt files may insert server side code supposed all pages depended are in the same code eg

I dw file.dwt (exact like this ext) files may insert server side code supposed all pages depended are in the same code eg cfml?

I'm sorry, but your English is pretty difficult for me to figure. I'm assuming your asking how to have a Dreameraver template support ColdFusion. It hat is what you are asking, the template file extension should be: YourTemplateName.dwt.cfm - this tells Dreamweaver is a ColdFusion template.
I hope I understood you and that this helps.
Lawrence Cramer - *Adobe Community Professional*
http://www.Cartweaver.com
Shopping Cart for Adobe Dreamweaver
available in PHP, ColdFusion, and ASP
Stay updated - http://blog.cartweaver.com

Pages v.5, trouble with section break placement

I have a document in which the first two pages should have no pagination, the Introduction is page 1, with the number placed bottom center, and the following pages should be numbered from 2, placed at upper right.
I thought I knew how to do this. The first pages now lack page numbers. At the end of the material of the second page I do a section break. Then for the next page, which is an Introduction, I insert a page number in the center of the footer. Next I should do another section break. This I do. A blue runs from the last word to the right column. In the footer of this page I insert page number 1.
Unfortunately, this "1" becomes a permanent property of the footer of all subsequent pages as if I had simply typed "1". I click on the header of the following page, go the menu, Insert->Page Number
so that the next number, 2, appears in the header.
If I place the mouse pointer at the end of the text of the Introduction and do a section break,

Can you try rewriting that please?
I am finding it extraordinarily difficult to follow.
Peter

Breaking SSHR SIT into sections

Hi, I have a special information type which I have deployed to Self Service (SSHR). The thing is, I want to divide some of the fields into sections with headers even though I am using just one S.I.T to save the data.
For example say I have an SIT that contains name, age, job, position, location. I might want to group name and age into Personal Details with a header, then job, position and location into another section called Assignment Details. Something like that.
Is it possible to create sections with headers using personalization when the self service page is based on an S.I.T

ah cool thanks, that works. ive changed the code slightly so it takes an expression entered by a user, but the program seems to stop if a divide symbol (/) is entered, any ideas?
import java.io.*;
public class ReadJava {
      public static void main(String[] args) throws IOException {
          KeyboardInput in = new KeyboardInput();
       System.out.print("Please enter a string: ");
       String expr = in.readString(); //reading in a string from the keyboard
          StreamTokenizer st = new StreamTokenizer (new StringReader (expr));
          int tokenType;
          while ((tokenType = st.nextToken()) != StreamTokenizer.TT_EOF) {
              switch (st.ttype) {
              case StreamTokenizer.TT_WORD:
                  System.out.println ("word=" + st.sval);
                  break;
              case StreamTokenizer.TT_NUMBER:
                  System.out.println ("number=" + st.nval);
                  break;
              default:
                  System.out.println ("operator=" + (char)st.ttype);
                  break;
}e.g. entering (5/5) would cause the program to output..
operator=(
number=5.0
----

Only the first page is printed reduced as setup. All pages afterward are full size with information cut off. Recent problem. Can print from Safari just fine. How can I get all pages to be reduced size?

Question
Printing internet pages
Reduced print size
Only the first page is reduced and printed as desired
All pages after the first page are full size with information cut off
Recent problem never seen before
Can print from Safari and other software just fine
How can I get all pages to be reduced size?

One suggestion worked from the Firefox prints incorrectly link mentioned above by mha007. I'm thrilled since this has been annoying me for weeks. Thanks mha007!
Reset all Firefox printer settings
# Open your profile folder:
# On the menu bar, click on the Help menu and select Troubleshooting Information. The Troubleshooting Information tab will open.
# Under the Application Basics section, click on Show in Finder. A window with your profile folder will open.
# Note: If you are unable to open or use Firefox, follow the instructions in Finding your profile without opening Firefox.
# On the menu bar, click on the Firefox menu and select Quit Firefox.
# In your profile folder, copy the prefs.js file to another folder to make a backup of it.
# Open the original prefs.js file in a text editor (such as TextEdit).
# Remove all lines in prefs.js that start with print. and save the file.
# If something goes wrong when you open Firefox, close it again and overwrite prefs.js with the backup you made.

OTL Time Cards to PA Integration. - All Time cards are imported into One OU

Hi,
At our site, we have implemented OTL to support PA. (No Payroll/HRMS).
We have created multiple selfservice Time Resp for each Operating Units. The MO Operating Unit for the responsibility is set to corresponding OU for each responsibility.
The issue is that,
When the Time cards are approved and the PRC: Transaction Import is ran for each operating unit (again difft responsibility for each OU), it is not importing the time cards into the respective OU in PA. Rather When we run the PRC: Transaction Import in US operating unit, all the Timecards are imported in the US OU.
We found, For all the OTL time cards, the ATTRIBUTE1 for the "SECURITY" Attribute category is 84 (which is US OU) in hxc_time_attributes table.
which configruation controls this ? Why the MO: Operating Unit is not used to populate the value or is there any other profile which needs to be set to get the right OU?
Any help on this is greatly appreciated.
Thanks
Chidambaram

Please check and confirm whether you have the profile 'HR:Business Group' set to corresponding BGs for the respective time entry responsibilities.
--Shiv

All pages contents are diagonal (text, pictures, buttons...)

when i open firefox, the home page loads, but everything is diagonal, and it's the same for every page, they load but all the contents are diagonal. an example: i see a button that should be in a corner standing in the middle of the page and when i want to click on it, the text from the button appears near it so i have to click there to load this content. it's like the button and it's picture are separated and everything it's diagonal, even the text is italic.

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Break dynamic data into sections in a table

I have some data that is being dynamically output into a table. I have multiple line items for each ECO Number on their own rows. For instance:
ECO
Part Number
Revision
1
C4520
A
1
C5680
B
1
C8902
A
2
C5000
B
2
C5050
C
2
C4950
A
How can I put in a blank line between the ECO sections of data. For instance, after the third line of ECO 1, there should be a blank line so I can break each section apart of ECO's. It should look like this:
Header 1
Header 2
Header 3
1
C4520
A
1
C5680
B
1
C8902
A
2
C5000
B
2
C5050
C
2
C4950
A
I have tried putting another row in the table, but it just puts a row after all this dynamic info. I've tried breaks everywhere too. So how do I keep the sections together and then break each section apart?
Andy

I have a cfloop query though, and not an output query. Will the group fuction work with cfloops? It seems not to since it gives me error on the page. It says the tag does not allow the attribute group.
Here's what I have:
<cfloop query="PNRBOMSearch">
<tr>
<td align="center">
<cfif ECID is not "">

#ECID#
<cfelse>
</cfif>
</td>
<td width="auto">
<cfif Part_Number Is Not "">
#Part_Number#
<cfelse>
</cfif>
</td>
<td align="center">
<cfif PNR_Initials Is Not "" and PNR_Initials EQ cookie.UserInitials>
#cookie.UserInitials#
<cfelse>
</cfif>
</td>
<td>
<cfif PNR_Initials Is Not "" and PNR_Initials EQ cookie.UserInitials>
<input type="text" name="PNR_Rev" value="#Trim(PNR_Rev)#" size="4">
<cfelse>
</cfif>
</td>
<td align="center">
<cfif BOM_Initials Is Not "" and BOM_Initials EQ cookie.UserInitials>
#cookie.UserInitials#
<cfelse>
</cfif>
</td>
<td>
<cfif BOM_Initials Is Not "" and BOM_Initials EQ cookie.UserInitials>
<input type="text" name="BOM_Rev" value="#Trim(BOM_Rev)#" size="4">
<cfelse>
</cfif>
</td>
<td>
<input type="radio" name="PNR_Queue_TM" value="1"
<cfif PNR_Queue_TM EQ 1>checked</cfif>>Yes
<input type="radio" name="PNR_Queue_TM" value="0"
<cfif PNR_Queue_TM EQ 0>checked</cfif>>No
</td>
</tr>
<cfelse>
</cfif>
</cfloop>
Thanks.
Andy

How do you break area type into columns?

I'm beginning to suspect that you can't.
What I'm looking to do is select my one area text box and set number of columns and be able to control gutter width.
Corel Draw was ridiculously easy with that, but I'm just not finding it with AI.
I'm not looking, if at all possible, to make multiple boxes and flow the text into each of them because that's, well that's just pathetic.
Sorry, don't mean to rant.
Thanks!

With the type frame selected, go to Type>Area Type Options and fill in the necessary.
Peter

Pages numbering always begins at section break

Even if I chose Show In Document, it still begins as page 2 at every section. Why?
By the way I unchecked the 'Include number on the first page'

In the Inspector palette set which page number to start on. You have to have clicked on the page where you change the page number

Installed iCloud and now all Pages docs are missing. How do I recover them?

I installed icloud this morning. This evening, when I went to use Pages, I discovered that all of my documents are missing. How do I recover them from before I converted to iCloud? Or can I?

Hi Twitty,
hmm, I knew I was missing something fairly obvious. I went into AppStore and the apps were there with an "accept" option rather than a price. I've started the download.
I've no idea if this means I'll be charged or not. I never got a screen with a price on it so hopefully not.
thanks for your quick response,
Sam.

How Do I Avoid Losing Formatting When Pages documents Are Converted to PDF Files and Emailed?

I put together a presentation piece with Pages, converted its 19 pages to pdf files, emailed the folder of pdf files to Staples for duplication, collation, and binding, and was disappointed to see some of my graphic frame formatting lost.
Can anyone please tell me how to avoid the loss in the future? 'Sure would appreciate it.
I was "raised" on Microsoft Publisher, then worked with Adobe Elements before switching to Mac. For the most-part, I find Mac OSX 10.7.5 a joy to use, but it takes me quite a while to figure out how to bridge differences between PC and Mac applications. Even though Mac applications tend to be straight forward, I loften find myself shaking my head and wondering how I could have been stumped so long by a little thing such as instant alpha. I don't want to chalk up this difficulty in adapting to old age, but could! (--Which translates: Please be easy on the old lady!) Thanking you in advance for such assistance as you might provide ...

Upgrade to Mountain Lion OSX 10.8, much better than Lion.
I take it you are talking about Pages '09?
Your problem is probably with anything that has transparency eg fancy frames, 3D charts, shadows, reflections because Pages exports all these to too low 72dpi resolution in .pdfs.
Prepping files for commercial print is always a concern and you need at least some Pro skills, but Apple has made life even harder with key missing settings and inferior presets.
The subject of preparing for print is rather broad and detailed.
You may find more comprehensive advice here:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Peter

How to count records in a page which are in detail section

Hi
Is there a option to count records in detail section and so that based on that can apply a formula.

Hi
can i place the below two formulas in section experpt ?
my report is like
gh#1
details-----which contains transactions related to above group for a country
group footer#1contains line '--
if for india there are 3 records in the same page there can be 2 or 3 records in detail section. like that a page can contain more than one country. if number of records are more and coming in next page then the whole section should be moved to new page.
that is my req. can u suggest accordingly.....
i want to count the number of records in detais which will vary also how can i put formula when they are going to next page?

Numbers are converting into scientific format

If there are any numbers in the report, when I export to csv,it is converting those numbers into exponential values.
If I export same report into excel it is showing the exact number.
Anyone suggest me how can I avoid the exponential values ?
Thanks.
Edited by: user12255470 on Nov 1, 2011 2:19 PM

Click on the fx button of the column in question. Enter the following;
1) '<span style="display:none">&nbsp</span>' || CAST(columnname AS CHAR)
between the double quotes, enter display:none*
2) On the Data Format tab of Column Properties, change the data type to HTML.
Now the values will download properly.

All page breaks are converted into section breaks

Similar Messages

Maybe you are looking for