All pages not listed after mobile me update

When I look under iWeb on my mobile me account, all of my pages are not listed. However, when I go to the sites that forward to those pages they show up. I don't want to republish yet as it may just be a case of the apple servers being slow to finish a complete update.
Any one else with this problem?
Message was edited by: lestudio

lestudio wrote:
I guess I was trying to find out if this is normal or if I am the only one where it shows a partial list.
I think it's normal — you're not the only one! ...You could try getting more info from MobileMe live chat support, which is now 24/7 — see this announcement.

Similar Messages

  • Update all button not working after today's update

    After today's iTunes update, the button to update all available app updates no longer works despite multiple clicks. Now each app can only be updated by accepting one at a time. If there are only one or two apps it is not too bad, but I had 15 today!

    if you have ONE app that is no longer available or has a problem with it (access, country/location, etc.) then the whole batch will fail. *****, because you can't tell which app until you go through all of them one by one. update often

  • All Pages Docs scrambled after 10.6 Update

    That means: formattings were changed, font spacing too tight or too wide etc., really ugly! Just as a test I opened a few old AppleWorks Docs (in AW, of course) ant they are fine.
    Luckily I could go back to 10.5.8 with TimeMachine for now - but I'd relly like the snow cat to work properly!
    Thanks in advance for any help!
    Don

    Hello! itcfonts.com support answered right away. It seems, that my AvantGardeITCTT fonts are somehow out-of-date (7 years old). They have new versions, but it came out that the font file names have changed! The support lady said, my Mac would not recognize/replace the fonts with the new version. Unfortunately I have already downgraded to 10.5 and can not test further, but very probably only Pages had problems with this font. AppleWorks (that I have no longer in actual use) files were fine.

  • HT2693 My Pages App will not open after I recently updated it. I'm afraid to lose all my docs if I delete the App and re-install.

    My Pages App will not open after I recently updated it. I'm afraid to lose all my docs if I delete the App and re-install.

    First of all - you are running the proper iOS in order to use the latest version of Pages - correct? You need iOS 6 now.
    If so ....See if this helps. Maybe Pages will open after you try this.
    Quit the Pages app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or ..... Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If that didn't help backup and send your files into iTunes with file sharing.
    You could lose all of your files if you delete and reinstall the app. That is precisely why you should backup your iPad and send your files into iTunes using files sharing on the iPad. Do you backup or use file sharing?
    Backup your iPad, send the files from the iPad into iTunes using file sharing and then delete the app and reinstall it.
    Start here ..... How to backup and restore from a backup
    http://support.apple.com/kb/HT1766
    iOS: About file sharing.
    http://support.apple.com/kb/HT4094

  • Iphone 4 not recognized and will not sync after latest itunes update.  I have done all trouble shooting and uninstalled and reinstalled itunes to no avail.

    iphone 4 not recognized and will not sync after latest itunes update.  I have done recommendedl trouble shooting and uninstalled and reinstalled itunes to no avail. Can I go back to earlier version of itunes or restore computer to fix?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • HT201366 CAC readers not working after installing security update 2013-003?

    Is anyone else having problems with CAC readers not working after installing security update 2013-003? CAC required websites are causing safari and chrome to crash.

    For CAC issues, see:
    MilitaryCAC's Mac OS X support landing page
    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click the line below to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • SD Card not showing after Mountain Lion Update

    This matter has been discussed for some time now in
    Apple Support Communities > Desktop Computers > iMac (Intel) > Discussions
    SD Card not showing after Mountain lion Update
    Since the update to Mountain Lion, the SD slot does not show up in Finder.
    Someone gave a fix using the killall in Terminal, and that worked only once.  I have not been able to get that fix to work again.
    The only saving grace for me is that my SD Card us is always from my Nikon camera, and Nikon ViewNX 2 software is able to see and read from the card.
    Killall may have worked partially in that I no longer get the error message telling me that I have removed the SD card improperly, and need to dismount it first.
    However, Finder still cannot see it.

    BrianForbesColgate wrote:
    Thanks, Barney ...
    Those are basics ... Been there, done that, first.
    Then you should hava posted all the troubleshooting you already accomplished.
    Does the card show up in System Information? Or is that another one of the "basics" you've already looked into?
    Does it show up in Disk Utility? If so, have you tried formatting it there to determine if it is a formatting problem?

  • Wifi not working after latest iOS update

    wif not working after latest iOS update 7.0.4.  Any suggestions?

    Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

  • Windows could not start after SP-3 update

    Windows could not start after SP-3 update
    After I updated Apple Software Update to 2.1 and then updated to BC 2.1 successfully I D/L & Installed SP-3. Even got the Wizard & seemed to go OK. Got prompt “Installation Complete, Need to restart.” I did. I got a black screen with text:
    Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
    You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
    I used the power button to shut down Windows & then booted into Mac OS X normally.
    I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP installation CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
    Has anyone done this with a similar error & successfully repaired their Windows installation? I don’t know if this is a Boot Camp problem or not. XP SP 2 had been working just fine.
    Thanks for any help.

    Solved! It apparently was NOT a Boot Camp Issue. The fix was to obtain the file “biosinfo.inf” and from the Mac side, go into my WIndows XP HDD & add that file to: Windows/INF folder. (Yes, it was missing). Why my XP SP2 installation worked fine w/o this file is beyond my knowledge. Perhaps this file is needed only when doing a type of major update yet not needed for simply starting & running Windows? There are web pages stating that upgrading to SP 3 can cause this problem if using 3rd party software such as Norton Anti-Virus (I don’t have that but DO have Zone Alarm). There are also various complicated, long fixes out there. For me, replacing that file did the trick & everything seems fine now. (As far as where one “obtains” that file--long story)
    Message was edited by: growler62000

  • All my Notes disappeared after ICloud upgrade

    All my Notes disappeared after ICloud upgrade. I cannot find them, nor a way to recover them from backups?  Any ideas? This is a BIG hiccup!

    I posted this on another discussion:
    Similar problem:  I was at a store today and went to my Notes on iPhone 3GS to look up information recorded there about medications for an aging parent. I am syncing through iCloud so the same notes are on my iPhone, iPad 1, and desktop Mac (in Mail). I opened one note, but it didn't have the information I needed, so I went back to the main Notes list and picked another of the dozen notes. I was scrolling down through that note and then suddenly....poof....the note was gone. ALL the notes were gone. The note pad said NO NOTES. ***???!!!!
    They were gone from my iPad, too. The notes represent information gathered and organized from multiple years (with no problems until now). The notes are information I NEED. I created a test note, it showed up on my devices. Then I chose to delete it to see if a single key click could do that. The app requires a second click on a Delete Note button as confirmation. And there's no way to delete ALL notes while viewing a single note, deliberately OR accidentally.
    Any suggestions about how to recover the notes lost today? Thanks in advance.

  • HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

    Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

    OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
    Go figure? Logical, No!

  • Itunes is not loading after i've updated to ios7. What do i do?

    Itunes is not loading after i've updated to ios7. What do i do?

    Try a Restart.
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
    Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
    Here is a link to their contacts with most of the information below.
    http://www.apple.com/contact/

  • My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • I have Microsoft Word for Mac 2011, version 14.3.1.  When I try to open a document, an error occurs, says file type is "blocked from opening in this version."  This was NOT immediately after a version update.  Any ideas?  Thank you.

    I have Microsoft Word for Mac 2011, version 14.3.1.  When I try to open a document, an error occurs, says file type is "blocked from opening in this version."  This was NOT immediately after a version update.  Any ideas?  Thank you.

    Take a look here:
    http://support.microsoft.com/kb/953266
    If that doesn't help, I'd suggest you take up the question in Microsoft's own forums or with Microsoft support.
    Regards.

  • My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

    My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

    - Try resetting the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Download/install a new app
    - Restore from backup
    - Restore to factory daults/new iPod.

Maybe you are looking for

  • Ipod nano is not recognised on my mac

    I have a Mac and an ipod and a nano and have previously sync both -no problem. Now the nano is not recognised by the mac. it show 'do not disconnect' and charges ok but doesn't appear on the source list so i can't restore or sync. I've tried resettin

  • Delete row menu on sales line item matrix

    Can anyone tell me how I can tell which row is being deleting by the menu event for this delete row ( MENU ID 1293) I want to access the record on the menu event and check some fields but the user does not always have to have a row selected to use th

  • Looks like a bug in DB, Getting a invalid number with a group by

    Hi All, This is very strange problem that I am encountering. Would like to hear from you, if you have also witnessed something similar: What I am doing: basically I am doing something like: Select x,y,z,count(distinct a) from taba,tabb,(select col1,c

  • 'Data' appears as IPOD name in IPOD Updater

    This IPOD Nano is doing my head in. I bought a Nano back last year and everything worked fine. Then one day 'Data' appeared as the IPOD name in ITunes when I plugged my IPOD in. It looked like it was updating my ipod, but nothing was upload to it. Wh

  • First tab not getting "TabPanelTabSelected" class when tabs created from dataset

    Greetings all. I've got a tabbedpanel widget whose tabs are created with a spry repeat region. works great, except none of the tabs get the "TabPanelTabSelected" class on initial load. I tried setting the defaultPanel in the constructor, but to no av