All Paper Profiles = Magenta Cast...Display Profiles are fine

R3000 - Windows 7 - 64 bit - Lightroom 5.6 - Print Module
Tried every possible combination of printer driver Mode and Profile (under Color Management tab in print module).
Using OFF (no color adjustment), as recommended by Epson or Epson Standard or ICM with any paper profile produces either very dark images or heavy Magenta Color Cast.  The only setting that produce a proper print (or Print to: JPEG file for that matter) are Adobe RGB mode and Adobe RGB Profile (I believe SRGB works as well).  I'm baffled.  I have a properly calibrated monitor and I've read all the manuals and message boards....I've downloaded new Epson profiles and Red River profiles...all produce heavy Magenta Cast....I cannot find a way to use a Paper ICC profile. 

For what its worth I am posting screen shots of my "Windows 7 Color Management settings".
I use a Canon Pro9000 Mk11 so I cannot comment on how to turn off the color management in the Printer Drivers preferences, which needs to be done if you are selecting a color profile in Lightroom.
See if the additional info at this link helps.
Epson R3000 -Print Driver settings, Windows 7

Similar Messages

  • After iOS 5 upgrade my "artists" are all screwed up on my iPhone but are fine on my iTunes. ANY SOLUTIONS?? HELP!!

    After iOS 5 upgrade my "artists" are all screwed up on my iPhone but are fine on my iTunes. ANY SOLUTIONS?? HELP!!

    I had a similar problem to you that I have since solved.
    At first only some albums/songs were missing artwork but they all showed up fine in itunes. I went into itunes and did the view where the album art is displayed next to the album in a list, middle option for viewing. I found that on several 1-2 songs did not have the artwork attached and so that was the cause of it not showing up on my iphone. However after I got all that solved I found that the artworks were all messed up. Much like you described many songs had the complete wrong artwork and some songs on the same album had different artworks or the same artwork showed up on multiple albums.
    I could only come up with resyncing my iphone to solve it. I only use one playlist for my iphone so that I can sort of do manual management and only have to deal with one playlist. So I unchecked the playlist and did a sync to clear off all the audio. Then I rechecked the playlist and did a sync to reload everything and after that was done everything appeared correctly.
    I didn't notice if this was affecting any of my purchased albums, I don't have that many so I didn't think about it but affected a lot of them. I hope this helps in some way and that you can get it working again.

  • I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine.  How do I get the network back?  It shows in my list of networks but when I use the password and try to join it says not connected.

    I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine.  How do I get the network back?  It shows in my list of networks but when I use the password and try to join it says not connected.

    See if the iPad will accept the password after you restart it. It's worth a try.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    You could also try a reset as well.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • After a hard reset all user profiles are now accessible by every user

    I initially had our office time capsule set up with 3 seperate user accounts ("profiles") via these instructions. Thus each user had a login for the time capsule that would then show them a shared folder that all users could see, and then a personal folder that only those logged into that account could see and access.
    While I was out of the office a co-worker was having trouble connecting his new iMac to the time capsule, so he called apple for assistance and they had him do a hard reset. The hard reset saved all the profiles and all information in each folder, but now everyone can access every folder. I'm not completely sure of what steps they took to set it up after the hard reset, but now, no matter which account you are logged in as you see:
    -"Shared"
         -(Shared folder)
    -"Users"
         -(user 1)
         -(user 2)
         -(user 3)
    So you have complete access to each users folders. Does anyone know if there is any easier way to set the user profiles back up the way they were originally set up by myself, or do I basically have to re-do the whole process (which includes saving and transfering all folders--which is a long process)?

    The security of the TC is designed for home networking.. because anyone who has physical access to the TC can easily access anything.. it is simply convenient perhaps to have user profiles.. but a quick 1 sec soft reset and anybody can gain access to anything.
    see answer I wrote here.
    https://discussions.apple.com/thread/4231228?tstart=0

  • Yesterday i downloaded a new album through iTunes. The first track has not copied successfully. This has never happened to me before. How can i retrieve this track. All the other tracks on the album are fine. Peter

    I downloaded an album from itunes but track 1 has not downloaded apart from the first few seconds. All other tracks are fine. How do i get track 1 back?

    re download it through the purchase section of Itunes Store
    Select Purchased from the quick links section. Navigate to the music and click the cloud icon to download

  • Pixma IP8710 photo paper profiles are wrong

    Hi,I realized the Photopaper profiles of Pixma IP8710 are wrong. Every time I tried to print a picuture on a photo paper plus Glossy II,  Photo Paper pro platinum the printer makes wrong borders. When select the Photo Paper  Glossy with any photo paper sheet, borders are printed correctly.Canon, please fix it.Regards,

    What printer model? What operating system?  
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • No paper profiles in LR 5.7.1

    Lighroom 5.7.1 Win 7 64. New homebuilt rig so new LR install. print> managed by "other"> no pop up menu at all. All paper profiles have been synced from my HP Z3200 and show up in win>>>color where they are meant to. BUT nothing shows up in LR. Printer setup has the profiles, just not in print dialogue in LR. If I click on other it actually freezes LR half of the time. The other half absolutely no pop up profiles to choose. Tried an install of 5.4 to see if that was the problem. No difference

    Really stupid but it turns out that because I am using a two monitor setup for the first time, the dialogue was appearing on the second monitor behind another programs display

  • How do I install Paper Profiles (.icc)?

    I am trying to install a paper profile I downloaded from Hahnemuhler .(PhotoRag) ...
    .icc profile selected that matches the printer and paper
    I copied the .icc profile to what I think is the right place: C:\windows\System32\spool\drivers\color
    I right clicked the profile for PhotoRag
    I clicked Install
    I restarted LightRoom and Photoshop ...
    I looked under all paper profile options (incl. Other) ...
    NO PHOTORAG ...
    What do you think I left out or missed?
    PC
    Windows 7
    Photoshop, Lightroom (latest versions)
    Much appreciated ... Chuck

    you can see the icc profiles when you convert your color settings from RGB to CMYK.
    Therefore, you can try in Photoshop menu;
    Edit - Convert to Profile and then you can select the profile which you've loaded to your Computer.
    Hope that works.

  • Camera profiles are gone after update of Camera Raw

    Hi,
    After an, automatic, update to camera raw 7.3 in Photoshop Elements 11 all Camera Profiles are gone. All that is left is "Matrix". Can someone please help me?
    I use Elements 11, windows Vista on a 64-bit machine, my camera is a Nikon D7000.
    Thanks!

    Do you have Photoshop CS6 installed on same machine?
    You can install the DNG converter from:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5519
    This will restore all camera profiles on your machine

  • Photoshop CS 4 won't use paper profiles.

    Running Photoshop CS 4. Changed operating system to Windows 7 64 bit. Using a calibrated monitor and Epson 3800 printer. The paper profiles are not being applied by photoshop. Printed 50% gray scale patches with no correction. The printer managed  patches were more accurate than the photoshop managed grayscale patches. The photoshop managed 50% gray scale  were not even close. Anyone had this problem. Any insight greatly appreciated.

    Go to c:\Program Files\Adobe\Photoshop Elements 9\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
    Now launch PSE and check if it works.
    Alternatively,
    Try resetting the PSE preferences by
       1. Close Elements.
       2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Edit.
       3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
    In case any network printer is attached try to launch without network or printer uninstall.
    try and let me know your comments.
    -Garry

  • Paper profiles  not showing in CS5 on  leopard

    I have an   intel core Imac and have just  downloaded CS5.  When I  try to print under 64 bits, my  epson paper profiles  are not listed.  They  do show up when I change to  32  bits.  I  have downloaded the  latest  drivers for my  epson 3800.  Any  suggestions?

    When I  try to print under 64 bits, my  epson paper profiles  are not listed.  They  do show up when I change to  32  bits.  I  have downloaded the  latest  drivers for my  epson 3800.  Any  suggestions?
    What OS version?
    Which list, in PS printer dialog or in the driver? If in the driver do you have lines through your choices?

  • Projects on one drive taking forever to load /conform, while projects on other HDDs are fine

    Hi guys, I'm at a bit of a loss here.
    I have a Core i7 Win 7 ultimate 24gb ram running premiere cs5.03
    I have a ssd drive for os and progs (C), and then 4 other identical 2tb drives for projects. (D,E,F and G)
    I have about 8 projects per drive, all the same thing (wedidngs)
    I have my last wedding of 2011 to get edited, and it is on the F drive.
    I dump all the folders into the project window, but the conforming stage is taking FOREVER (3+ hours and I gave up, an average wedding all the files conform in a few minutes)
    The file types are h264 .mov from canon DSLRs by the way, but I have discovered that it must he a problem with my F drive.
    At first I thought it was settings issue with CS5 (media cache folders etc..), so I tried changing the media chache drives etc... but nothing helped
    Then I tried to open a previous CS5 project that was on the F drive (a project I completed just one week ago) and it just hanged on the loading screen (20 mins and I gave up)
    It is strange as the drive isn't nearly full, plenty of space on it (in fact my E drive is nearly full but I can still open all the projects on taht and they load up in the normal time frame)
    Nothing else is on the drive, just project folders, the same size and type of projects that re aon all of my other drives, they all work fine, but now all of drive F seems 'corrupted'?
    So it seems I have a problem with my F drive (D, E and G are all fine)
    I don;t know what the problem is or how to identify it.
    I am currently doing the error checking process then I will defrag.
    The bizarre thing is, nothing has changed, last week everything was fine, this week I have a problem with that one drive.
    I've read online that it helps to have separate sratch disks for video, audio, previews etc...
    But with my yearly workflow, it is better for me to just have the whole project (video, audio, previews etc..) on the same folder in the same drive.
    This has worked great for the past 6 months, but all of a sudden, any old projects on the F drive hang on the loading page, and any new projects take more than 3 hours to import / conform?
    I've tried my best to explain the problem but reading it back my description does seem a bit all over, I guess that's becuase my mind is all over the place due to this problem!
    It's my last wedding from 2011 and I cannot get the project started (been at it all day, havent got any editing done, just trying to solve this)
    So if anyone has any tips or advice on how to identify the problem, confirm if it is a HDD issue or premier issue (I think HDD as all other projects on the other drives are fine) I would greatly appreciate it.
    Thanks
    James

    Powered by Design wrote:
    I was just looking back at my copy of the drive and I was able to save 110GB of data
    For some reason I think I might have missed some but its to late now since the drive will not spin up anymore.
    If you do go this route make sure to do it all at once.
    I think I might have waited between tries but can really remember, it was a long time ago and I try to keep better back-ups now.
    Glenn
    Hi Glenn,
    Thanks so much for your responses,
    "I then froze the drive and as soon as I took it out started copying the files to a new drive.
    Running CPU-Z or Speccy I could monitor the temp of the drive.  As the temp went back up the speed of the drive slowed till I could not copy any more.  I just repeated and kept going till I got all the data off.
    I still have the drive but even freezing cant geet it back up and running now.
    Its not a good meathod since it will ruin your drive but its free and might work."
    Sorry I ma not reallt sure on the internal worksings of HDDs, can ask you to explain what this is?
    Thanks again for your help
    James

  • I have a macbook pro 17" 2012 and the display colours are all too hard and the profile will not change it is stuck toLED Cinema display.

    I have a macbook pro 17" 2012 and the display colours are all too hard and the profile will not change it is stuck toLED Cinema display.

    Hello hbothner,
    Thanks for using Apple Support Communities.
    If you'd like to change the colors on your Mac's display, then you can calibrate your display by following the steps in the article below.
    OS X Yosemite: Calibrate your display
    Take care,
    Alex H.

  • Where are printer paper profiles stored in Mavericks?

    In previous versions of OS X, I could find where my printer paper profiles were stored. I have some test paper profiles that don't work and I want to delete them but I can't find them in Mavericks 10.9.2 I have done a search for their name but apparently they are hidden although they show up in Photoshop and the Printer dialog box. What and where is the folder I need to look in? Thanks for your help.

    ~/Library/ColorSync/Profiles

  • After a UPSA connection edit, all my user profiles are "missing from import"

    Hi there,
    I've got a problem with my User Profile Service Application. I edited my existing connection to add some new OU containers to the list, after the networks team had done some
    restructuring to reflect an organizational change. Then I ran a Full Synchronization. But now all of my user profiles show up under the "Missing from Import" list. I still have 943 profiles in SharePoint, and not surprisingly, people search isn't
    working. I suspect that I did something wrong in the process of selecting the Users OU containers in the AD tree (in Populate Containers), but I cannot see what, since I replicated the selections that had been made for an unchanged department, to
    the ones that had been reorganized.
    Any help appreciated.
    Tom
    SharePoint Systems Officer, Capital Regional District, BC, Canada

    Hi  Tom ,
    According to your description, my understanding is that all the user profiles are showing up under "Profiles missing from import" list after you edited the existing User Profile Synchronization
    Connection.
    For your issue, it can be caused by that your User Profile Synchronization Connection is unable to connect to  your AD. Please make sure  the account used to connect to Active Directory to import
    profiles has access to the Organizational Unit you are importing from. By default this account is the Default Content Access account. And the Default Content Access account  must be a domain user account and it must have read access to external or secure
    content sources that you want to crawl by using this account.
    Then you need to check if the “Profile Synchronization” job status is “succeed”.
    Also please check the “Sync filter” for the service, and make sure the account are not include in the Exclusion Filter for Users.
    For a workaround, you can just delete the existing connection , recreate it and perform a full synchronization.
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
    contact [email protected]
    Eric Tao
    TechNet Community Support

Maybe you are looking for