[All Platforms] New UI for On-the-Fly Collaborative Playlists
The idea came to me following a house party. There were four of us and we couldn’t decide whose Spotify playlist we should listen to. The decision was, as usual with us, to play one song per person. This didn’t work well either as only one device could be connected through Bluetooth to the stereo system at a time. Once a song finished there had to be a long wait for another song to start while one device disconnected from the stereo system and another connected, then all over again.. We gave up on the music all together in the end.
The next morning the solution seemed obvious to me. It would make things a lot easier if we could have a shared playlist. At the moment I know it is possible to share your own playlist with friends, but haven’t heard about one that can be created by several people at the same time in such an easy way.
The idea is simple, but in my view would solve the problem my friends and I had at the house party. It works in the following way:
Let’s say I want to create a new playlist that I could share with several people in the room. I create a playlist on the main device, call it ‘Alena’s House Party’. I then choose a list of people I want to share my playlist with (these would be people I follow already or another Spotify user that I can easily browse). A message appears on the personal devices of the people I have selected to accept the invitation. Once this is done a bubble (like the one in Facebook messenger) appears on all the relevant devices including the main device. This is the new Spotify playlist I have just created. Now my friends and I can browse our personal playlists and drag and drop the songs we want to add to ‘Alena’s House Party’. As a host, I get to review and sort the suggestions. Alternatively, to be absolutely fair, one song per person could be automatically selected from the list of suggested songs.
The plus of this is that it is easy to use. The bubble can appear anywhere on the screen on your mobile and you can sort your songs at any time, it also allows you to copy your favourite songs in the new playlist by dragging and dropping from various existing playlists on Spotify. And of course makes it easier to share music with your friends instantly and without a hustle.
Hi, thank you for your reply. I have tried using 'Collaborative playlist'
feature as you describe but failed to figure out how it works. Am I correct
in thinking that by using this feature you can take an existing playlist
and and allow someone else to edit it? If so, I believe my idea is
different and certainly would be easier to understand and use. I am
suggesting a totally new playlist that would be created on the go. Say, I
add a few songs (could be from different playlists) and my friends can do
the same from their own playlists. The application would be easy to use as
all you need to do is drag and drop a song into a bubble, which is the
shared playlist.
Therefore, I wouldn't like the case to be closed. If you feel you need to
change the description, please do so.
Thank you
Similar Messages
-
ADF BC LOV: creating a new LOV entry in-the-fly
Hi all
I have LOV enabled ViewObject attribute, which is actually a foreign key to the another, master table, as usual.
Now, user searches LOV values, and decides that he need a new entry in the master table, which should to be assigned to the LOV enabled attribute.
So, as part of creating current (detail) record (in the same transaction), I need to provide ability to create a new master record (in the af:popup for example), whose primary key after that automatically becomes value of LOV enabled attribute (and appears in the LOV, after clicking oh the search icon)
Both detail ViewObject and master ViewObject are part of the same Application module
How to do that ? Any example ?Thanks for the reply. I am running jDeveloper 11g Version 2.
I tried the Bind Variable approach as well. I would love to use the code mentioned above, but where would I put it? Where can you put code that gets called before the page is generated?
I tried using the task flow to set the Bind variable between the createInsert and the page view. The method to set the bind variable was never called. I generated the necessary java code for the setter on the view object (and client interface) and placed a debug break point in the setter method just to make sure. -
As of recently, I've purchased a new laptop.
Seeing as how I'm quite used to using my drawing tools in Photoshop and Illustrator (my trusty Wacom Intuos Pro),
I'm curious as to if I'm able to install my current purchased version of Creative Suite Design Standard 6 onto my laptop (whilst still having it installed on my main at-home work desktop).
Thank you very much for taking the time to oversee my question, and hopefully respond with an answer.
Much thanks!Thank you for the assistance!
I shall try to install once I arrive home from school this evening.
Again, much appreciated! -
After downloading the new IOS for Ipad I cannot use Words for Friends from Ipad. I uninstalled it but when I try to reinstall it pops up with "item you wish to buy is no longer available".
I suggest trying the update again after an hour or two. Sometimes, the notice that an update is available comes an hour or two before the developers actually sends the revised app out to be downloaded.
-
New entry for "What the Experts are saying.." on Spatial OTN
http://www.oracle.com/technology/products/spatial/customer_success.html
Hello, released last month was a review of eSpatial iSMART product suite which works and expands on Oracle Spatial. This was completed by Professor Frederick Limp for GeoWorld and is available openly. Please add reference to the article on the "What the Experts are saying.." on Oracle Spatial OTN page (see above)
The tag line should read...
New Product Review, eSpatial iSMART. - October 2004, GeoWorld Article (HTML)
W. Fredrick Limp, Director of the Center for Advanced Spatial Technologies (CAST), Arkansas, reviews eSpatial's iSMART(R) Product Suite for Oracle Spatial.
The link to the article is...
http://www.geoplace.com/uploads/featurearticle/0408qt.asp
Thanks
Alan
Alan Lawless
e¦Spatial
t: 01 8675 524
f: 01 8675 599
m: 087 412 6156
[email protected]
www.espatial.comThe Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contacting Apple for support or
Apple ID- Contacting Apple for help with Apple ID account security. Ask to speak to
Account Security.
3. Rescue email address and how to reset Apple ID security questions.
How to Manage your Apple ID: Manage My Apple ID -
When new update for N95 ,the code is 0551989
Hi body here ,when is the new firmware version for N95(code is 0551989)? my version is V12.1?
thanks!First of all, there is no AppleWorks "staff" - we are all just users like you.
AppleWorks 6 has not been updated since January, 2004, for the Mac & PC. The odds of another update are "slim & none" since iWork ’05 was announced as "building the successor to AppleWorks." I've not used XP, but have used AppleWorks 6 on Windows 95, 98 & 2000 with it being less stable on each successive version. I currently use AppleWorks 5 on my work PC with Win2K. I had read that AW 5 wasn't stable on Win2K, but it is certainly better than AW 6. When they "upgrade" us to XP Pro next month, I'm going to try to get the "helpless" desk to install my AW 6 again & see how it does. Meanwhile, I find it easier to take my MacBook Pro to work & use it along side the PC. -
I like the previous iOS version where I can scroll my new pictures from the top...not from the bottom.
After I updated my iPhone 5 to iOS 8.1, I have to start to scroll from the bottom to the top find my older pictures. I have been searching for the solution on this forum and from Google search and I am TOTALLY HOPELESS. Anyways, How do I fix this problem? Please help. Thank you.
Sincerely,
BlendercroixConnect to iTunes, make sure the items you want are checked, then sync.
-
ITunes Playlists: Why is the new update for iTunes not playing whole playlists?
Hi,
All my music comes from my home network and works fine on my laptop, until I try to make a playlist. The music plays fine until a certain point and then iTunes cannot locate the source files and an exclamation point pops up on the rest of the music I selected.
If I then double click on the tracks with the exclamation point it finds the source file again, without me having to locate the file. Very strange.
Anyone with the same problem? Or able to help?
Computer Details
Laptop: Packard Bell Easynote
Processor: Intel Celeron @ 2.16GHz
Memory: 4.00 GB Ram
Storage Space: 450 GB
iTunes: 12.1.1.4Hi there Glovener,
I understand that you are seeing an issue with iTunes that has started after an update. Here is an article that talks about troubleshooting iTunes issues and can help you address this issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
https://support.apple.com/en-gb/HT203206
While the title of the article does not specifically mention your issue, these basic troubleshooting steps will be a good starting point for addressing this. Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
New solution for Limit the value in JSpinner with changable max/min value
I have ever stuck with a problem like that :
1. My application need to get two int value A and B that user input.
I use two JSpinner with Number format model.
named in jSpinnerFrom (A value get from) jSpinnerTo (B value get from)
2. The request is that :
two value can be any Integer, But the value of (B - A) can not more than 1000.
I use changeListener added into the JSpinner, when use set value make (B-A) larger than 1000, I set value back.
But when user press mouse on arrow button, the value will be increase automaticaly, and at last the value can not set back that make (B-A) not larger than 1000.
3. So I get the BasicArrowButton of the jSpinnerFrom and jSPinnerTo,
and add a mouselistener on the arrowbutton. When mouseReleased, then chen the value (B-A), if it is larger than 1000, then set it back the proper value.
Thus I can make the min/max value in the JSpinner be changable, and limit the two input value be in range of 1 - 1000
Post this wish be help for any one has thus familar request.
Good Luck!!Something like this might work
import javax.swing.*;
import java.awt.*;
import javax.swing.event.*;
class Spin extends JFrame implements ChangeListener
JSpinner spinner1;
JSpinner spinner2;
JPanel jp;
public Spin()
setDefaultCloseOperation(EXIT_ON_CLOSE);
setSize(200,75);
setLocation(400,300);
spinner1 = new JSpinner(new SpinnerNumberModel(1000, 1000, 9999, 5));
spinner1.addChangeListener(this);
spinner2 = new JSpinner(new SpinnerNumberModel(0, 0, 1000, 5));
jp = new JPanel();
jp.add(spinner1);
jp.add(spinner2);
getContentPane().add(jp);
public void stateChanged(ChangeEvent ce)
int s1 = ((Integer)spinner1.getValue()).intValue();
jp.remove(spinner2);
spinner2 = new JSpinner(new SpinnerNumberModel(s1-1000, s1-1000, s1, 5));
jp.add(spinner2);
validate();
public static void main(String[] args) {new Spin().setVisible(true);}
} -
How do I instantiate a new object reference on the fly?
ex:
class1 reference would be in the source code as:
myclass class1;
this class would be instantiated in the source code as:
class1 = new myclass();
Now later in the program I want to instantiate a
new object of myclass but I don't have a reference
like "class2" predefined so I can't do something like:
class2 = new myclass();
Is there any way I can create the new reference "class2" on the fly?Thanks Plucien for the reply.
myclass someObject = (myclass) class.forName(nextclass).newInstance();
Very interesting code! I'll try it.
You're right I should have explained what I'm trying to achieve before
just asking for help.
I have a class that is drawing a line in a Canvas. The user is asked
to click on a Button to draw more lines. Every line is an instantiation of a class. I don't know how many times the user will click on the Button so I have to instantiate classes and references on the fly.
Will your code example do this? -
TS1702 New ipad useless after the ios6 download
You would think I would learn my lesson buying apple products so very fed up with them brand new ipad worked ok for a week downloaded ios6 and its so rubbish I have far to many complaints to list all it seems fit for is the bin so angry with myself for falling for yet another one .
If you are unhappy with the iPad, return it. This is a forum for technical help for users that want help and not for complaints. Do yourself a favor - and those of us that want help and/or offer it willingly - if you dont want help with the iPad and you are fed up - return your iPad and move on.
-
I Moved From New York To Florida, But Kept The Same WiFi/Router, But The Maps App and My iPod Touch(4th Gen. & iOS 6) Is Still Registering My Location In New York.
For location the iPod uses the location of nearby routers that are in Apple's database of routers and their location. Thus it appears that Apple's database is incorrect. You do not have to be connected to the router, just within range.
Apple periodically updates their database based on information they obtain from iPhones, The iPhone has to have turned on the option to send info to Apple. no one has found another way to get the location of a router added/corrected.
You can confirm that by going to well-know place with wifi like Starbucks or McDonalds -
Creating new Attributes for use with AttributedStrings
I trying to find a way to change the color of key strings in a phrase so that they stand out. For example.
the String (The water is HOT). I want the word HOT to be the color RED.
I have noticed in using the TextAttributes option on the AttributedString doesn't have an option to change a color for a particular word in a String only a way to swap the foreground and background colors. In general is there a way to add new attributes for doing the above example?
Just a note. This modification is not being done in an editor pane or text field. I'm looking for a way to do this without user interaction.If you are not drawing this in an JEditorPane, but just with DrawText, you will have to split the text up your self, draw the first half, then switch colors, then draw the second half.
-
Needed sample program for emailing the report output
hi all,
neede sample program for emailing the report outputHi,
Please refer this program for sending e-mail with attachment.
***INCLUDE ZHZLPP_CLZSN_DAILY_MIS_PRINT .
*& Form print
* text
* --> p1 text
* <-- p2 text
FORM print .
DATA: wa_output_options TYPE ssfcompop,
wa_control_parameters TYPE ssfctrlop,
t_otfdata TYPE ssfcrescl,
t_pdf_tab TYPE TABLE OF tline WITH HEADER LINE.
DATA: t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE.
DATA: w_filesize TYPE i.
DATA: w_bin_filesize TYPE i.
DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
i_tline TYPE TABLE OF tline WITH HEADER LINE,
v_form_name TYPE rs38l_fnam,
v_len_in LIKE sood-objlen,
w_return TYPE ssfcrescl.
DATA : l_mean TYPE p DECIMALS 2,
l_mean1 TYPE p DECIMALS 2,
l_mean2 TYPE p DECIMALS 2,
l_mean3 TYPE p DECIMALS 4,
temp TYPE p DECIMALS 2,
v_header LIKE zmisdisp3-remark,
disp_d_kwh_mt TYPE zmisdisp5,
disp_m_kwh_mt TYPE zmisdisp5,
disp_d_mt_mw TYPE zmisdisp5,
disp_m_mt_mw TYPE zmisdisp5,
l_bptarget(16) TYPE p DECIMALS 2,
l_act_d(16) TYPE p DECIMALS 2,
l_act_c(16) TYPE p DECIMALS 2,
l_pow_gen TYPE p DECIMALS 2,
l_pow_gen_d TYPE p DECIMALS 2,
l_pow_gen_c TYPE p DECIMALS 2,
l_no_of_days TYPE p,
disp_bptarget TYPE zmisdisp5,
disp_act_d TYPE zmisdisp5,
disp_act_c TYPE zmisdisp5,
disp_d_kwh TYPE zmisdisp5,
disp_c_kwh TYPE zmisdisp5,
disp_d_mw TYPE zmisdisp5,
disp_c_mw TYPE zmisdisp5,
disp_pow_gen_d TYPE zmisdisp5,
disp_pow_gen_c TYPE zmisdisp5,
disp_pow_gen TYPE zmisdisp5,
disp_ftd_h1 TYPE zmisdisp5,
disp_ftd_h2 TYPE zmisdisp5,
disp_ftd_h3 TYPE zmisdisp5,
disp_ftd_h4 TYPE zmisdisp5,
disp_ftd_h5 TYPE zmisdisp5,
disp_ftd_o1 TYPE zmisdisp5,
disp_ftd_o2 TYPE zmisdisp5,
disp_ftd_o4 TYPE zmisdisp5,
disp_ftd_o5 TYPE zmisdisp5,
disp_***_o1 TYPE zmisdisp5,
disp_***_o2 TYPE zmisdisp5,
disp_***_o4 TYPE zmisdisp5,
disp_***_o5 TYPE zmisdisp5,
disp_cath_d TYPE zmisdisp5,
disp_cath_c TYPE zmisdisp5,
disp_anode_d TYPE zmisdisp5,
disp_anode_c TYPE zmisdisp5,
l_rec_con_d_kwh(16) TYPE p DECIMALS 2,
l_rec_con_c_kwh(16) TYPE p DECIMALS 2,
l_rec_con_d_mw(16) TYPE p DECIMALS 2,
l_rec_con_c_mw(16) TYPE p DECIMALS 2,
tot_kah TYPE p DECIMALS 2,
avg_kah TYPE p DECIMALS 2,
disp_tot_kah TYPE zmisdisp5,
disp_avg_kah TYPE zmisdisp5,
v_ftd_h1 TYPE p DECIMALS 2,
v_ftd_h2 TYPE p DECIMALS 2,
v_ftd_h3 TYPE p DECIMALS 2,
v_ftd_h4 TYPE p DECIMALS 2,
v_ftd_h5 TYPE p DECIMALS 2,
v_ftd_o1 TYPE p DECIMALS 2,
v_ftd_o2 TYPE p DECIMALS 2,
v_ftd_o4 TYPE p DECIMALS 2,
v_ftd_o5 TYPE p DECIMALS 2,
v_***_o1 TYPE p DECIMALS 2,
v_***_o2 TYPE p DECIMALS 2,
v_***_o4 TYPE p DECIMALS 2,
v_***_o5 TYPE p DECIMALS 2,
l_cdiff1 LIKE imrg-cdiff,
l_cdiff2 LIKE imrg-cdiff,
l_cdiff3 LIKE imrg-cdiff,
l_cdiff4 LIKE imrg-cdiff,
l_path LIKE rlgrap-filename,
l_flag.
DATA :prod_disp TYPE TABLE OF zmisdisp1 WITH HEADER LINE,
keyp_disp TYPE TABLE OF zmisdisp2 WITH HEADER LINE,
keyp_dis1 TYPE TABLE OF zmisdisp2 WITH HEADER LINE,
rmat_disp TYPE TABLE OF zmisdisp4 WITH HEADER LINE,
rcur_disp TYPE TABLE OF zmisdisp6 WITH HEADER LINE,
rhrs_disp TYPE TABLE OF zmisdisp4 WITH HEADER LINE,
brkd_disp TYPE TABLE OF zmisdisp7 WITH HEADER LINE.
DEFINE fill_kpp.
clear l_flag.
loop at it_mic_data where kurztext = &1.
l_mean1 = it_mic_data-mittelwert.
l_mean = it_mic_data-mean.
if l_flag = ' '.
move : &2 to keyp_disp-desc,
l_mean1 to keyp_disp-ftd.
if it_mic_data-kurztext = 'Ingot Pb SHG Zinc'.
l_mean2 = v_mean_pbshg.
move l_mean2 to keyp_disp-avg.
elseif it_mic_data-kurztext = 'Ingot Cu SHG Zinc'.
l_mean2 = v_mean_cushg.
move l_mean2 to keyp_disp-avg.
elseif it_mic_data-kurztext = 'Ingot Cd SHG Zinc'.
l_mean2 = v_mean_cdshg.
move l_mean2 to keyp_disp-avg.
elseif it_mic_data-kurztext = 'Ingot Fe SHG Zinc'.
l_mean2 = v_mean_feshg.
move l_mean2 to keyp_disp-avg.
elseif it_mic_data-kurztext = 'Ingot Zn SHG Zinc'.
l_mean2 = v_mean_znshg.
move l_mean2 to keyp_disp-avg.
else.
move l_mean to keyp_disp-avg.
endif.
if it_mic_data-masseinhsw = 'GLI'.
move 'g/l' to keyp_disp-unit.
elseif it_mic_data-masseinhsw = 'PPM'.
move 'ppm' to keyp_disp-unit.
elseif it_mic_data-masseinhsw = 'NO'.
move 'no' to keyp_disp-unit.
else.
move it_mic_data-masseinhsw to keyp_disp-unit.
endif.
append keyp_disp.
clear keyp_disp.
move 'X' to l_flag.
else.
move : l_mean1 to keyp_disp-ftd.
append keyp_disp.
clear keyp_disp.
endif.
endloop.
if sy-subrc is not initial.
move &2 to keyp_disp-desc.
append keyp_disp.
clear keyp_disp.
endif.
END-OF-DEFINITION.
DEFINE fill_kp1.
clear l_flag.
loop at it_mic_data where kurztext = &1.
l_mean1 = it_mic_data-mittelwert.
l_mean = it_mic_data-mean.
if l_flag = ' '.
move : &2 to keyp_dis1-desc,
l_mean1 to keyp_dis1-ftd.
if it_mic_data-kurztext = 'Ingot Pb SHG Zinc'.
l_mean2 = v_mean_pbshg.
move l_mean2 to keyp_dis1-avg.
elseif it_mic_data-kurztext = 'Ingot Cu SHG Zinc'.
l_mean2 = v_mean_cushg.
move l_mean2 to keyp_dis1-avg.
elseif it_mic_data-kurztext = 'Ingot Cd SHG Zinc'.
l_mean2 = v_mean_cdshg.
move l_mean2 to keyp_dis1-avg.
elseif it_mic_data-kurztext = 'Ingot Fe SHG Zinc'.
l_mean2 = v_mean_feshg.
move l_mean2 to keyp_dis1-avg.
elseif it_mic_data-kurztext = 'Ingot Zn SHG Zinc'.
l_mean3 = v_mean_znshg.
move l_mean3 to keyp_dis1-avg.
clear l_mean3.
l_mean3 = it_mic_data-mittelwert.
move l_mean3 to keyp_dis1-ftd.
else.
move l_mean to keyp_dis1-avg.
endif.
if it_mic_data-masseinhsw = 'GLI'.
move 'g/l' to keyp_dis1-unit.
elseif it_mic_data-masseinhsw = 'PPM'.
move 'ppm' to keyp_dis1-unit.
elseif it_mic_data-masseinhsw = 'NO'.
move 'no' to keyp_dis1-unit.
else.
move it_mic_data-masseinhsw to keyp_dis1-unit.
endif.
append keyp_dis1.
clear keyp_dis1.
move 'X' to l_flag.
else.
if it_mic_data-kurztext = 'Ingot Zn SHG Zinc'.
clear l_mean3.
l_mean3 = it_mic_data-mittelwert.
move l_mean3 to keyp_dis1-ftd.
else.
move : l_mean1 to keyp_dis1-ftd.
endif.
append keyp_dis1.
clear keyp_dis1.
endif.
endloop.
if sy-subrc is not initial.
move &2 to keyp_dis1-desc.
append keyp_dis1.
clear keyp_dis1.
endif.
END-OF-DEFINITION.
*FIRST PAGE
********PLANT HEADER
MOVE 'CLZS HYDRO I PLANT - DAILY PRODUCTION REPORT' TO v_header.
********Production figure
LOOP AT it_disp1.
prod_disp-desc = it_disp1-desc.
prod_disp-d_plnmg = it_disp1-d_plnmg.
prod_disp-d_menge = it_disp1-d_menge.
prod_disp-u_plnmg = it_disp1-u_plnmg.
prod_disp-u_menge = it_disp1-u_menge.
prod_disp-avg = it_disp1-avg.
prod_disp-ask_rate = it_disp1-ask_rate.
prod_disp-m_plnmg = it_disp1-m_plnmg.
prod_disp-y_plnmg = it_disp1-y_plnmg.
prod_disp-y_menge = it_disp1-y_menge.
prod_disp-y_variance = it_disp1-y_variance.
APPEND prod_disp.
ENDLOOP.
********Key performance parameters
MOVE 'ROASTER :' TO keyp_disp-desc.
APPEND keyp_disp.
fill_kpp '% S/S IN 45 DEG' ' S/S in Calcine'.
MOVE 'LEACHING :' TO keyp_disp-desc.
APPEND keyp_disp.
fill_kpp '% S/S IN CAL' ' S/S in Calcine'.
fill_kpp '%water soluble Zn' ' W/S Zn in Jarosite Cake'.
fill_kpp '%total Zn in HBF' ' T/Zn in Jarosite cake'.
fill_kpp 'ZINC IN CT' ' Zn in Conditioning tank'.
fill_kpp 'g/l zn in neutral overflow' ' Zn in Electrolyte Prod (gpl)'.
fill_kpp 'PPM CU IN PS25' ' Purified Solution Cu'.
fill_kpp 'PPM CADMIUM IN PS25' ' Purified Solution Cd'.
fill_kpp 'PPM COBALT IN PS25' ' Purified Solution Co'.
MOVE 'CELLHOUSE :' TO keyp_disp-desc.
APPEND keyp_disp.
fill_kpp 'g/l zinc in cell feed' ' Cell Feed Zinc gpl'.
fill_kpp 'GPL ACID IN CELL FEED' ' Cell Feed acidity gpl'.
fill_kpp 'g/l manganese in cell feed' ' Cell Feed Mn gpl'.
LOOP AT t_imrg_add_disp.
MOVE: t_imrg_add_disp-desc TO keyp_disp-desc,
t_imrg_add_disp-d_value TO keyp_disp-ftd,
t_imrg_add_disp-c_value TO temp,
temp TO keyp_disp-avg.
IF t_imrg_add_disp-units = 'NO'.
MOVE: 'no' TO keyp_disp-unit.
ELSE.
MOVE: t_imrg_add_disp-units TO keyp_disp-unit.
ENDIF.
APPEND keyp_disp.CLEAR keyp_disp.
ENDLOOP.
fill_kp1 'Ingot Pb SHG Zinc' ' Ingot Pb SHG Zinc'.
fill_kp1 'Ingot Cu SHG Zinc' ' Ingot Cu SHG Zinc'.
fill_kp1 'Ingot Cd SHG Zinc' ' Ingot Cd SHG Zinc'.
fill_kp1 'Ingot Fe SHG Zinc' ' Ingot Fe SHG Zinc'.
fill_kp1 'Ingot Zn SHG Zinc' ' Ingot Zn SHG Zinc'.
********Cellhouse power
CATCH SYSTEM-EXCEPTIONS bcd_zerodivide = 1.
v_m_kwh_mt = v_ind8_m / cathode_recipt.
v_m_mt_mw = cathode_recipt / ( v_ind8_m / 24000 ).
ENDCATCH.
MOVE : v_d_kwh_mt TO disp_d_kwh_mt,
v_m_kwh_mt TO disp_m_kwh_mt,
v_d_mt_mw TO disp_d_mt_mw,
v_m_mt_mw TO disp_m_mt_mw.
*SECOND PAGE
********Raw Material
LOOP AT it_disp3.
rmat_disp-desc = it_disp3-desc.
rmat_disp-opstk = it_disp3-opstk.
rmat_disp-d_recpt = it_disp3-d_recpt.
rmat_disp-u_recpt = it_disp3-u_recpt.
rmat_disp-d_cons = it_disp3-d_cons.
rmat_disp-u_cons = it_disp3-u_cons.
rmat_disp-clstk = it_disp3-clstk.
APPEND rmat_disp.
ENDLOOP.
********Work in Progress
********Finished Goods
********power consumption
l_no_of_days = v_mm_en_dt+6(2).
CATCH SYSTEM-EXCEPTIONS bcd_zerodivide = 1.
l_bptarget = ( v_bp_nrms_p * v_gross_d ) / l_no_of_days.
l_act_d = v_ind6_d + v_ind2_d - ( v_ind3_d + ( v_ind4_d / 2 ) ) - v_ind5_d.
l_act_c = v_ind6_m + v_ind2_m - ( v_ind3_m + ( v_ind4_m / 2 ) ) - v_ind5_m.
l_pow_gen = ( v_ind2_d / 1000 ) / v_ind7_d.
ENDCATCH.
l_pow_gen_d = v_ind2_d / 1000.
l_pow_gen_c = v_ind9_m / 1000.
l_rec_con_d_kwh = v_ind8_d.
l_rec_con_c_kwh = v_ind8_m.
l_rec_con_d_mw = v_ind8_d / 24000.
l_rec_con_c_mw = v_ind8_m / ( 24000 * v_days_pased ).
LOOP AT t_disp_curr.
rcur_disp-time = t_disp_curr-time.
rcur_disp-current = t_disp_curr-current.
rcur_disp-kah = t_disp_curr-kah.
APPEND rcur_disp.
AT LAST.
SUM.
tot_kah = t_disp_curr-kah.
ENDAT.
ENDLOOP.
avg_kah = tot_kah / '24'.
*********************running hrs
LOOP AT it_disp6.
rhrs_disp-desc = it_disp6-desc.
rhrs_disp-opstk = it_disp6-d_runhrs.
rhrs_disp-d_recpt = it_disp6-m_runhrs.
APPEND rhrs_disp.
ENDLOOP.
rhrs_disp-desc = 'Turbo Generator'.
rhrs_disp-opstk = v_turbod.
rhrs_disp-d_recpt = v_turboc.
INSERT rhrs_disp INDEX 2.
**********************BREAK_DOWN & OIL
CLEAR value.
LOOP AT itab2.
IF itab2-equnr = 'NMZ-EH01G001'.
PERFORM s_conversion_h.
v_ftd_h1 = v_ftd_h1 + value.
CLEAR value.
ENDIF.
IF itab2-equnr = 'NMZ-EH01G002'.
PERFORM s_conversion_h.
v_ftd_h2 = v_ftd_h2 + value.
CLEAR value.
ENDIF.
IF itab2-equnr = 'NMZ-EH01V003'.
PERFORM s_conversion_h.
v_ftd_h3 = v_ftd_h3 + value.
CLEAR value.
ENDIF.
IF itab2-equnr = 'NMZ-EH01V001'.
PERFORM s_conversion_h.
v_ftd_h4 = v_ftd_h4 + value.
CLEAR value.
ENDIF.
IF itab2-equnr = 'NMZ-EH01V002'.
PERFORM s_conversion_h.
v_ftd_h5 = v_ftd_h5 + value.
CLEAR value.
ENDIF.
ENDLOOP.
LOOP AT t_oil.
AT END OF ind.
SUM.
IF t_oil-ind = 1.
v_***_o1 = t_oil-cdiff * 1000.
ELSEIF t_oil-ind = 2.
v_***_o2 = t_oil-cdiff * 1000.
ELSEIF t_oil-ind = 3.
v_***_o4 = t_oil-cdiff * 1000.
ELSEIF t_oil-ind = 4.
v_***_o5 = t_oil-cdiff * 1000.
ENDIF.
ENDAT.
IF t_oil-idate = p_repdt.
IF t_oil-ind = 1.
l_cdiff1 = l_cdiff1 + t_oil-cdiff.
ELSEIF t_oil-ind = 2.
l_cdiff2 = l_cdiff2 + t_oil-cdiff.
ELSEIF t_oil-ind = 3.
l_cdiff3 = l_cdiff3 + t_oil-cdiff.
ELSEIF t_oil-ind = 4.
l_cdiff4 = l_cdiff4 + t_oil-cdiff.
ENDIF.
ENDIF.
ENDLOOP.
v_ftd_o1 = l_cdiff1 * 1000.
v_ftd_o2 = l_cdiff2 * 1000.
v_ftd_o4 = l_cdiff3 * 1000.
v_ftd_o5 = l_cdiff4 * 1000.
*********Breakdown details----3rd page
LOOP AT itab INTO wa.
CALL FUNCTION 'FLTP_CHAR_CONVERSION'
EXPORTING
decim = 0
expon = 0
input = wa-auszt
ivalu = 'X'
IMPORTING
flstr = wk_char_auszt.
CONDENSE wk_char_auszt NO-GAPS.
wk_flt_auszt = wk_char_auszt.
wk_flt_auszt = wk_flt_auszt / 3600.
duration = wk_flt_auszt.
brkd_disp-eqdesc = wa-eqktx.
brkd_disp-nodesc = wa-qmtxt.
brkd_disp-hrs = duration.
APPEND brkd_disp.
ENDLOOP.
MOVE : v_ftd_h1 TO disp_ftd_h1,
v_ftd_h2 TO disp_ftd_h2,
v_ftd_h3 TO disp_ftd_h3,
v_ftd_h4 TO disp_ftd_h4,
v_ftd_h5 TO disp_ftd_h5,
v_ftd_o1 TO disp_ftd_o1,
v_ftd_o2 TO disp_ftd_o2,
v_ftd_o4 TO disp_ftd_o4,
v_ftd_o5 TO disp_ftd_o5,
v_***_o1 TO disp_***_o1,
v_***_o2 TO disp_***_o2,
v_***_o4 TO disp_***_o4,
v_***_o5 TO disp_***_o5,
l_bptarget TO disp_bptarget,
l_act_d TO disp_act_d,
l_act_c TO disp_act_c,
l_rec_con_d_kwh TO disp_d_kwh,
l_rec_con_c_kwh TO disp_c_kwh,
l_rec_con_d_mw TO disp_d_mw,
l_rec_con_c_mw TO disp_c_mw,
tot_kah TO disp_tot_kah,
avg_kah TO disp_avg_kah,
l_pow_gen TO disp_pow_gen,
l_pow_gen_d TO disp_pow_gen_d,
l_pow_gen_c TO disp_pow_gen_c,
v_cath_d TO disp_cath_d,
v_cath_c TO disp_cath_c,
v_anode_d TO disp_anode_d,
v_anode_c TO disp_anode_c.
wa_output_options-tdimmed = 'X'.
wa_control_parameters-device = 'PRINTER'.
wa_control_parameters-preview = 'X'.
IF rb3 = 'X'.
wa_control_parameters-getotf = 'X'.
wa_control_parameters-no_dialog = 'X'.
ENDIF.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZHZLPP_CLZSN_DAILY_MIS'
IMPORTING
fm_name = v_form_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
ENDIF.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = wa_control_parameters
output_options = wa_output_options
user_settings = 'X'
header = v_header
date = p_repdt
l_bptarget = disp_bptarget
l_act_d = disp_act_d
l_act_c = disp_act_c
disp_d_kwh = disp_d_kwh
disp_c_kwh = disp_c_kwh
disp_d_mw = disp_d_mw
disp_c_mw = disp_c_mw
disp_tot_kah = disp_tot_kah
disp_avg_kah = disp_avg_kah
disp_d_kwh_mt = disp_d_kwh_mt
disp_m_kwh_mt = disp_m_kwh_mt
disp_d_mt_mw = disp_d_mt_mw
disp_m_mt_mw = disp_m_mt_mw
disp_pow_gen = disp_pow_gen
disp_pow_gen_d = disp_pow_gen_d
disp_pow_gen_c = disp_pow_gen_c
disp_ftd_h1 = disp_ftd_h1
disp_ftd_h2 = disp_ftd_h2
disp_ftd_h3 = disp_ftd_h3
disp_ftd_h4 = disp_ftd_h4
disp_ftd_h5 = disp_ftd_h5
disp_ftd_o1 = disp_ftd_o1
disp_ftd_o2 = disp_ftd_o2
disp_ftd_o4 = disp_ftd_o4
disp_ftd_o5 = disp_ftd_o5
disp_***_o1 = disp_***_o1
disp_***_o2 = disp_***_o2
disp_***_o4 = disp_***_o4
disp_***_o5 = disp_***_o5
disp_cath_d = disp_cath_d
disp_cath_c = disp_cath_c
disp_anode_d = disp_anode_d
disp_anode_c = disp_anode_c
IMPORTING
job_output_info = w_return " .
TABLES
prod_tab = prod_disp
keyp_tab = keyp_disp
remk_tab = it_remarks
rmat_tab = rmat_disp
rwip_tab = it_disp4
rfng_tab = it_disp_fg
rcur_tab = rcur_disp
rhrs_tab = rhrs_disp
brkd_tab = brkd_disp
keyp_tab1 = keyp_dis1
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE 'Error in printing form' TYPE 'I'.
ENDIF.
********Downloading in pdf format.
IF rb3 = 'X'.
IF l_usract <> 9.
MOVE fullpath TO l_path.
i_otf[] = w_return-otfdata[].
CALL FUNCTION 'CONVERT_OTF' "
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc <> 0.
ENDIF.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
bin_filesize = v_len_in
filename = l_path
filetype = 'BIN'
IMPORTING
filelength = w_filesize
TABLES
data_tab = i_tline
EXCEPTIONS
file_open_error = 1
file_write_error = 2
invalid_filesize = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc = 0.
MESSAGE 'File downloaded successfully' TYPE 'S'.
ENDIF.
ENDIF.
ENDIF.
IF sy-batch = 'X'. " SENDING MAILS IF SCHEDULED IN BACKGROUND
DATA: formname TYPE tdsfname,
fm_name TYPE rs38l_fnam,
control_parameters TYPE ssfctrlop,
output_options TYPE ssfcompop,
job_output_info TYPE ssfcrescl,
otf_data TYPE tsfotf.
DATA: otf TYPE TABLE OF itcoo WITH HEADER LINE,
doctab_archive TYPE TABLE OF docs WITH HEADER LINE,
lines TYPE TABLE OF tline WITH HEADER LINE,
bin_filesize TYPE i.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZHZLPP_CLZSN_DAILY_MIS'
IMPORTING
fm_name = v_form_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
ENDIF.
control_parameters-no_dialog = 'X'.
control_parameters-getotf = 'X'.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = control_parameters
header = v_header
date = p_repdt
l_bptarget = disp_bptarget
l_act_d = disp_act_d
l_act_c = disp_act_c
disp_d_kwh = disp_d_kwh
disp_c_kwh = disp_c_kwh
disp_d_mw = disp_d_mw
disp_c_mw = disp_c_mw
disp_tot_kah = disp_tot_kah
disp_avg_kah = disp_avg_kah
disp_d_kwh_mt = disp_d_kwh_mt
disp_m_kwh_mt = disp_m_kwh_mt
disp_d_mt_mw = disp_d_mt_mw
disp_m_mt_mw = disp_m_mt_mw
disp_pow_gen = disp_pow_gen
disp_pow_gen_d = disp_pow_gen_d
disp_pow_gen_c = disp_pow_gen_c
disp_ftd_h1 = disp_ftd_h1
disp_ftd_h2 = disp_ftd_h2
disp_ftd_h3 = disp_ftd_h3
disp_ftd_h4 = disp_ftd_h4
disp_ftd_h5 = disp_ftd_h5
disp_ftd_o1 = disp_ftd_o1
disp_ftd_o2 = disp_ftd_o2
disp_ftd_o4 = disp_ftd_o4
disp_ftd_o5 = disp_ftd_o5
disp_***_o1 = disp_***_o1
disp_***_o2 = disp_***_o2
disp_***_o4 = disp_***_o4
disp_***_o5 = disp_***_o5
disp_cath_d = disp_cath_d
disp_cath_c = disp_cath_c
disp_anode_d = disp_anode_d
disp_anode_c = disp_anode_c
IMPORTING
job_output_info = job_output_info
TABLES
prod_tab = prod_disp
keyp_tab = keyp_disp
remk_tab = it_remarks
rmat_tab = rmat_disp
rwip_tab = it_disp4
rfng_tab = it_disp_fg
rcur_tab = rcur_disp
rhrs_tab = rhrs_disp
brkd_tab = brkd_disp
keyp_tab1 = keyp_dis1
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc = 0.
otf_data = job_output_info-otfdata[].
CALL FUNCTION 'CONVERT_OTF_2_PDF'
IMPORTING
bin_filesize = bin_filesize
TABLES
otf = otf_data[]
doctab_archive = doctab_archive[]
lines = lines[]
EXCEPTIONS
err_conv_not_possible = 1
err_otf_mc_noendmarker = 2
OTHERS = 3.
IF sy-subrc = 0.
SUBMIT rsconn01 with mode = 'INT' AND RETURN.
* ----<<distrubution list>>----
PERFORM mail_users TABLES lines USING 'MIS-HY1A' v_header. " Donot put more than 8 email-ids
PERFORM mail_users TABLES lines USING 'MIS-HY1B' v_header. " in a distribution list
PERFORM mail_users TABLES lines USING 'MIS-HY1C' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1D' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1E' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1F' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1G' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1H' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1I' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1J' v_header.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " print
*& Form get_download_path
* text
* --> p1 text
* <-- p2 text
FORM get_download_path .
CALL FUNCTION 'GUI_FILE_SAVE_DIALOG'
EXPORTING
window_title = 'Download as pdf file'
default_extension = 'pdf'
IMPORTING
fullpath = fullpath
user_action = l_usract.
IF l_usract = '9'.
STOP.
ENDIF.
ENDFORM. " get_download_path
*& Form mail_users
* text
* -->P_LINES text
* -->P_2153 text
* -->P_V_HEADER text
FORM mail_users TABLES p_lines STRUCTURE tline
USING p_dist_list
p_v_header.
CONSTANTS: c_raw TYPE so_obj_tp VALUE 'RAW',
c_pdf TYPE so_obj_tp VALUE 'PDF',
c_255 TYPE i VALUE 255,
c_134 TYPE i VALUE 134,
c_x TYPE c VALUE 'X'.
DATA: document_data LIKE sodocchgi1 ,
tab_lines TYPE i,
contents_txt TYPE TABLE OF solisti1 WITH HEADER LINE,
contents_bin TYPE TABLE OF solisti1 WITH HEADER LINE,
packing_list TYPE TABLE OF sopcklsti1 WITH HEADER LINE,
object_header TYPE TABLE OF solisti1 WITH HEADER LINE,
receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
l_str(255) ,
v1 TYPE i,
v2 TYPE i,
v3 TYPE i.
document_data-obj_name = 'EMAIL'.
document_data-obj_descr = p_v_header. " SUBJECT LINE
CONCATENATE 'Please find the attached SAP generated Daily Production Report for the day'
p_repdt+6(2)
p_repdt+4(2)
'.' p_repdt+0(4)
INTO contents_txt.
APPEND contents_txt.
CLEAR contents_txt.
APPEND contents_txt.
APPEND contents_txt.
DESCRIBE TABLE contents_txt LINES tab_lines.
READ TABLE contents_txt INDEX tab_lines.
document_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( contents_txt ).
document_data-doc_size = tab_lines .
CLEAR packing_list-transf_bin.
packing_list-head_start = 1.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = tab_lines.
packing_list-doc_type = c_raw.
packing_list-doc_size = document_data-doc_size.
APPEND packing_list.
LOOP AT p_lines.
CLEAR l_str.
l_str+0(2) = p_lines-tdformat.
l_str+2(132) = p_lines-tdline.
v2 = v1 + c_134.
IF v2 LE c_255.
contents_bin-line+v1(c_134) = l_str. v1 = v2.
ELSE.
v3 = v2 - c_255.
v2 = c_255 - v1.
IF NOT v2 IS INITIAL.
contents_bin-line+v1(v2) = l_str+0(v2).
ENDIF.
APPEND contents_bin.
CLEAR contents_bin.
v1 = v3.
v3 = 134 - v1.
IF NOT v1 IS INITIAL.
contents_bin-line+0(v1) = l_str+v3(v1).
ENDIF.
ENDIF.
ENDLOOP.
APPEND contents_bin.
CLEAR contents_bin.
DESCRIBE TABLE contents_bin LINES tab_lines.
READ TABLE contents_bin INDEX tab_lines.
CONCATENATE 'Hy-I Report'
p_repdt+6(2)
p_repdt+4(2)
'.' p_repdt+0(4)
'.pdf'
INTO object_header.
APPEND object_header.
packing_list-transf_bin = c_x.
packing_list-head_start = 1.
packing_list-head_num = 1.
packing_list-body_start = 1.
packing_list-body_num = tab_lines.
packing_list-doc_type = c_pdf.
packing_list-obj_name = 'text1'.
packing_list-obj_descr = 'Production report'.
packing_list-doc_size = tab_lines * 255 + STRLEN( contents_bin ).
APPEND packing_list.
receivers-receiver = p_dist_list.
receivers-rec_type = 'C'.
APPEND receivers.
CLEAR receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = document_data
put_in_outbox = ' '
SENDER_ADDRESS = 'CZPPPLG'
SENDER_ADDRESS_TYPE = 'B'
commit_work = 'X'
TABLES
packing_list = packing_list
object_header = object_header
contents_bin = contents_bin
contents_txt = contents_txt
receivers = receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc = 0.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 with mode = 'INT' AND RETURN.
ENDIF.
ENDFORM. " mail_users -
Difference between " COMPRESS FOR ALL OPERATIONS" and "COMPRESS FOR OLTP"?
I was looking through Oracle's OLTP Table Compression (11g onwards) documentation as well as online resources to find the syntax and came across two different versions:
COMPRESS FOR ALL OPERATIONS
and
COMPRESS FOR OLTP
The documentation I looked through didn't mention any alternative syntax, so i was wondering if anyone here might know the difference.
Thank you!Table Compression Enhancements in Oracle Database 11G Rel1 as as follows:
The compression clause can be specified at the tablespace, table or partition level with the following options:
•NOCOMPRESS - The table or partition is not compressed. This is the default action when no compression clause is specified.
•COMPRESS - This option is considered suitable for data warehouse systems. Compression is enabled on the table or partition during direct-path inserts only.
•COMPRESS FOR DIRECT_LOAD OPERATIONS - This option has the same affect as the simple COMPRESS keyword.
•COMPRESS FOR ALL OPERATIONS - This option is considered suitable for OLTP systems. As the name implies, this option enables compression for all operations, including regular DML statements. This option requires the COMPATIBLE initialization parameter to be set to 11.1.0 or higher.
Maybe you are looking for
-
Is there any way to deactivate a device from the Verizon website?
I'm trying to deactivate a phone we don't use anymore, and I'm wondering if I can do that anywhere on the Verizon Wireless website? I've found the "suspend services" tab, but I want to permanently deactivate the phone. I'm just trying to save myself
-
Hi I would like to know whether weblogic 5.1 or 6 provides support in a single transaction, transaction support for both oracle and MQseires, if so where can i find suitable documentation on this topic
-
How to identify the source of matched songs?
This happens quite often. When I click the arrow next to one of the songs in my library to show in iTunes store, frequently I will be taken straight to the homepage of iTunes or iTunes will prompt the message this song is not available in your countr
-
Loading multisamples into Exs24 logic 8
When loading multi samples using "automap using root key" into logic 8 it seems to stretch the regions all the way across and not to the desired note and put in equal positions Have I set it by mistake to do something a bit wierd? Thanks Nass
-
INCLUDING ALL FORM INFO IN EMAIL RECEIPTS
Hi, Our form includes a copy of our terms and conditions. At the moment our customers fill in the form and get a copy with an email recipt. The only problem is that it does not include our terms and conditions. We would like to add our terms and