[All Platforms][Playlists] Allow different GUI style for user made playlists (hi-light colours)

When I am browsing the playlist list, I get lost, I find it very hard to pick up a playlist at a glance.
First the application should show the current user owned playlists in a different color.
Then it would be cool to have the possibility to specify an highlight/background color for a specific playlist to be able to organize them better.
For example I prepare a playlist for a trip and I set it in red so that I do not have to search for it every time I want to select it.
This is like it is today:
I was thinking at something like OSX does on Mac:
Another improvement could be then maybe to search for specific colored playlists.

Updated: 2015-07-05Hi and thanks for your contribution! A similar idea has also been suggested here:
https://community.spotify.com/t5/Live-Ideas/Color-labeling-playlists-in-sidebar/idi-p/997188
Add your kudos and comments there please!

Similar Messages

Can Captivate 6 be configured to print different text styles for Handouts.

When printing a project as a WORD document, using the "Handouts" type, is there a way to tell Captivate 6 to used different styles for slide names, slide notes, and text captions? Right now they all populate the WORD document as one style - Normal.

Hi There,
Welcome To Adobe Forums.
We would like to tell you that you can increase and decrease the size of the slides using the "Use table in the output" option.
If the above is checked then the slide will show little shrink in size. However if the option is unchecked the the slide show a large size.
However the styles cannot be applied through handouts to the slides.
Thanks
Loveesh

Can you apply different paragraph styles for each orientation?

I would like to apply different paragraph styles to the text, depending if it is viewed on portrait or landscape mode, but everytime I change one the other changes automatically. Is there a way to break this link?
Thanks

Unfortunately, iBA doesn't provide a lever to pull that can make a particular text style orientation specific.

How to use different xsl's for user first time logon in OAM

Hi,
We have a requirement to use different stylesheets (xsls) for employees and customers in OAM. How we can configure different XSLs for user first time logon to OAM (i.e for change password and configuring challenge and responses).
Any pointers on this is appreciated.
Thanks in advance..
Srikanth

XSLs displayed are controlled by the StyleCookie. So if you can set the value of this cookie to be different front customers and employees, they will see different styles.
You can do this in various locations -> from the web server, from the url, custom plugins, etc....
-Raj

How to change the font style for user profile information in My Profile page?

Hello,
In my profile page, user information is getting display as below:
Name
Title
Department --> Would you please let me know how can I change style for Department ( Information Technologies) Attribute in this section ?
Thanks and Regards,
Dipti Chhatrapati

Hi Romeo,
I got your point and class I require to apply is as below:
.ms-contactcardtext3 {
font-family:
Arial !important;
font-style: italic !important;
Thank you for your trick :)
But its getting apply to title as well as to Department - as above class is same for both fields , while I require to change the style only for the department.
Any suggestions ? I have changed the same using Designer which works as per the need , however - I dont want to use SPD Tool !!!
Bottom line : I Require different font style in Title and Department without use of SPD.
Any suggestions/idea ?
Thanks and Regards,
Dipti Chhatrapati

Different Directory views for users

How can I achieve different directory views on user's phones for different types of users using DCD?
This is for a Centrex type of service.

OK. I see this posting which mentions installing the IP Services SDK for such applications.
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Phone%20Services%20for%20Developers&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc61e0/0#selected_message
I find it hard to believe that there is not an easier way.
Why can't there be a directory-profile setting or a setting in the device profile to group users?

How can I create a different hyperlink style for my footer only?

My footer is dark so the site hyperlink styles don't look good. I'm sure there must be a way to set footer specific hyperlink styles, but I cannot find out how to do it. Please help!
Thanks.

Thanks, Sanjit. Your answer brought me one step closer.
For anyone in future who is trying to find the answer to this question, here's what to do:
1. Go to Site Properties > Content tab. Click the "new link style" icon below the window.
2. Rename the style and then adjust the hyperlink properties.
3. Back on your page, create a hyperlink in the usual way, then click on the orange Hyperlinks beside the Add or filter links dropdown field to get the hyperlinks popup box. Go to the dropdrown field called Text Link Style and select your new style.

All USB drives mount as read only for user

I have searched a bunch and thee results I find seem to be irrelevant to my situation. Most relate to a single USB media that is a problem and won't read or write.
On a new Arch install on a new computer (my third base system install). Running Gnome.
All USB mass storage devices mount as read only for the logged in user. Root has write permissions and I can mkdir no problem. It is not an issue with the USB drive itself as this occurs with multiple USB media (I've tested several SD cards on a reader and at least two drives, all the media works correctly on my existing installations)
I'm posting the contents of my /etc/group file in case there's an obvious error there I don't see, and my dmesg output upon plugging in the drive. User name is changed in the group file posted to "archie"
This is a single-user system.
/ect/group
root:x:0:root
bin:x:1:root,bin,daemon
daemon:x:2:root,bin,daemon
sys:x:3:root,bin
adm:x:4:root,daemon
tty:x:5:
disk:x:6:root
lp:x:7:daemon
mem:x:8:
kmem:x:9:
wheel:x:10:root,archie
ftp:x:11:
mail:x:12:
uucp:x:14:archie
log:x:19:root
utmp:x:20:
locate:x:21:
rfkill:x:24:
smmsp:x:25:
http:x:33:
games:x:50:
lock:x:54:
uuidd:x:68:
dbus:x:81:
network:x:90:
video:x:91:
audio:x:92:
optical:x:93:
floppy:x:94:
storage:x:95:
scanner:x:96:
power:x:98:
nobody:x:99:
users:x:100:archie
systemd-journal:x:190:
archie:x:1000:
avahi:x:84:
polkitd:x:102:
rtkit:x:133:
gdm:x:120:
brlapi:x:999:
kvm:x:78:
ntp:x:87:archie
dmesg output
[ 968.044188] usb 4-3: new high-speed USB device number 4 using ehci-pci
[ 968.170628] usb-storage 4-3:1.0: USB Mass Storage device detected
[ 968.171435] scsi7 : usb-storage 4-3:1.0
[ 969.174450] scsi 7:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 969.175068] scsi 7:0:0:1: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 969.939417] sd 7:0:0:0: [sdb] 15572992 512-byte logical blocks: (7.97 GB/7.42 GiB)
[ 969.941028] sd 7:0:0:0: [sdb] Write Protect is off
[ 969.941037] sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 969.944664] sd 7:0:0:1: [sdc] Attached SCSI removable disk
[ 969.945509] sd 7:0:0:0: [sdb] No Caching mode page found
[ 969.945517] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 969.952682] sd 7:0:0:0: [sdb] No Caching mode page found
[ 969.952693] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 969.956396] sdb: sdb1
[ 969.965003] sd 7:0:0:0: [sdb] No Caching mode page found
[ 969.965011] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 969.965015] sd 7:0:0:0: [sdb] Attached SCSI removable disk
I'm sure I'm just missing something in user management, but I can't find what.
Last edited by hooya (2014-04-27 03:10:49)

I am also having the same problem. Root can read and write to automounted drives, but my user cannot. I've tried with a variety of drives, I am assuming they are being automounted by root instead of the logged-in user somehow. (I am running x directly, and am not using a display manager, if that has anything to do with it).
When I look at how it is mounted it is as follows:
/dev/sdc1 on /run/media/myuser/drivename type vfat (rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro,uhelper=udisks2)

Allowed set of characters for user name and password in OIM 11g

Hi,
Can anyone provide us quickly what is the characters (no.s,alpahbets,special symbols) that are supported for username and password field in OIM 11.1.1.5 ?
Thanks,
Karthik

Read it , it is general for OIM 11g
http://docs.oracle.com/cd/E14571_01/relnotes.1111/e10132/oim.htm#CHDFFDGH

Http authentication failing on all sites, does not even prompt me for user/pass

Hi,
After an apt-get update, sites that use HTTP authentication do not prompt for credentials and go straight to HTTP:401. It is only affecting this browser, others have no issues. I also updated a FF in Windows, no issues there after the update.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Sites for user-made .pst/.cst exchanges?

I recently posted a little guitar "riff sketch" I'd recorded with GarageBand to a forum, and had one user write me back asking about the settings I'd used since he'd been trying to get similar sounds. I wrote back providing links to zipped copies of the relevant .pst and .cst files for the presets I'd tweaked up, with instructions about where to place them, but also just screenshots of the settings in case juggling files about proved too technical.
It made me wonder whether there are any sites where GB users can exchange their own settings in some way. Is there any 3rd-party software that makes slinging .pst/.cst files around any easier? Line6 maintains a big community site where users of their amp sims can post their homebrew settings for other users to download. For GB, this sort of thing wouldn't just be limited to users of guitar amp sims -- there are lots of presets for lots of purposes that could be exchanged. If Apple isn't doing this ... maybe they should! And is anyone else doing it?
iBook G4 Mac OS X (10.4.6)

Just to get my hands back on how to use PackageMaker,
I created an Amp Sim called Semi-Clean Strat. Here is
the installer, see what you think.
http://www.schneblin.com/misc/SCS.zip
It installs both the pst and cst files.
Cool! I downloaded that this morning before heading off to work. I haven't had a chance to install it or try it yet, but I will this weekend. I've tweaked up a preset aimming at a fairly/semi-cleanish Fender-Twin-Reverb-ish sound, but I've got a LP with humbuckers, so even engaging the coil tap takes me somewhere slightly different than a Strat. I look forwarding to seeing how your preset work out with my kit
And, meanwhile, I dig the pretty icon
Out of curiosity, before I run it, to where does it install the files? Does it give you a choice? I took GB3's options to install the GB support files to a location of my choosing, on an external drive, and have sometimes run into trouble with 3rd-party GB add-ons whose installers assume you've got all the support stuff in the default locations (like "/Library/Application Support/GarageBand/Instrument Library/", whereas I have a completely different path to the "/Instrument Library/" folder).
iBook G4 Mac OS X (10.4.6)

I'm trying to make different link styles, but they all match

I'm trying to create different link styles for different kinds of links (like links in the navigation bar, a telephone link for cell phone users, and maybe an email link).
All of these links will be different colors, against different colored backgrounds. So each of their normal states will need to be different colors.
Problem is, when I set one up the way I want, then go on to the next one, it is automatically set up with the normal state color I just set.
So I change it to the new normal state color I want for that item.
Then I go back to the previous link I had set up before, just to make sure it didn't change, but it did change to the new normal state I just set up.
Isn't there some way around this?

Hello,
In order to get it working, I would suggest you to create different Text link styles and apply them according to the requirement in the website.
Please have a look at the video in the link below which might explain how to create and use them :
http://trainingwebcom.worldsecuresystems.com/SachinFTP/2012-10-24_2314.swf
Hope this helps.
Regards,
Sachin

Different Consumption Account for Movement type 201 and 261

Dear All ;
Client want use different consumption account for movement type 201 and 261 .
How we canmap this in SAP
Kindly suggest .
Regards;
Joydeep Mukherjee

This you can acheive by setting account assignment indicator is checked.
OMJJ >>> Movement Type >>>Account Grouping >>Check account Assignment
If this indicator is set, the system checks whether a G/L account or an account assignment has been specified on the item screen when user post transactional data. If so, the system copies this data to the posting line for account determination.
If this indicator is not set, the system always uses the G/L accounts or account assignments determined automatically.

Different document numbers for cash receipt and cash payment

Dear ALL
can we get different document numbers for cash payment and cash receipt
regards
sheena

Dear Jigar ,
i am not able get separate document number for cash receipt and cash payment
though i assigned in fbcjc0.can you elaborate on what you have told .
further cash receipt and cash payment for gl account s it is taking consecutive numbers only
can you give me your gmail id
regards
sree

Scatter chart with different markers styles

Hello,
I am using Oracle Apex 4.
i have created a scatter chart with three series
i want to use different marker style for each serie :
the first is circle
the second is across
the third is square.
Any suggestions please.
Thanx..

Dir,
any idea for this problem ?

[All Platforms][Playlists] Allow different GUI style for user made playlists (hi-light colours)

Similar Messages

Maybe you are looking for