All plist files are not being pushed out

Current setup : 10.6 Server ( updated to 10.6.8 )
About 10 to 15 client machines ( 10 Desktops and 5 laptops )
These client machines are being managed in a group already for Software Updates from the server and hence already have the managed preferences folder on each machine.
I have just created a new com.apple.print.custompapers.plist file and have added it to the Preference Editor for that group and have set it to 'Often'. ( WorkGroup Manager -> Computer Group -> Preferences -> Details )
But after repeated attempts, I am still not able to push out this plist file to the client machines. I have tried the following already :
1. Deleting the Managed Preferences folder from each machine. Result : It recreates the folder again, but again with only the Software update plist file.
2. I have tried setting the plist to 'Always' from the 'Once, Often, Always' selection in the Preferences Editor. Result: Same result as above.
3. I have tried adding the file manually to Managed Preferences. Result : The file is removed at the next login, and cannot be used before that.
All clients are running on 10.6.8.
If you require any more information, please specify and I'll provide it. Thank you for looking over the problem and giving it thought.
Hope to hear from someone with a possible resolution soon.
Thanks.
Prat.

Have you tried setting another, pre-made preference in the computer group settings to see if it applies?
Have you run plutil /path/to/plist in the command line to see if it is OK (can't see why this would matter, this is a stab in the dark)?
P.S.
I have found that OpenDirectory can be quirky. I have found it become corrupt but still mostly functional quite quickly after setup. Since Apple has not well documented this software and offers no directory maintenance tools, every year I end up having to rebuild the server from scratch. I know this is not very helpful, but strange, unpredictable, and unbecoming behavior seems to be more frequent than I prefer. (Thankfully setting up an OS X Server is a veritable breeze compared to Microsoft Server Products).

Similar Messages

  • ALL OF MY FILES ARE NOT BEING SAVED WHEN I CLOSE FINAL CUT PRO X ?

    ALL OF MY FILES ARE NOT BEING SAVED WHEN I CLOSE FINAL CUT PRO X ?

    WHAT FILES AREN'T BEING SAVED? WHAT FILES ARE SAVED?

  • JavaScript files are not being updated while updating managed solution over Dynamics CRM Online

    Hi Support,
    While I am updating a managed solution over Dynamics CRM 2013 Online, JavaScript files are not being updated and is showing the source as of the last version of the managed solution. 
    I tried the same versions of solution on my CRM 2013 on-premise install (test organization) and it updated successfully.
    This is a bit urgent issue. Please suggest how to resolve this.
    Online version of the CRM is
    Microsoft Dynamics® CRM Online Spring '14
    (6.1.1.1855) (DB 6.1.1.1847)
    blog: <a href="http://technologynotesforyou.wordpress.com">http://technologynotesforyou.wordpress.com</a> | skype: ali.net.pk

    Our technical team managed to find the immediate cause for the problem, and a solution.
    According to them there was a corruption on a speciffic OLAP file. By deleting it, they allowed it to be recreated on the next application processing. The file in question was found in \Microsoft SQL Server\MSSQL.2\OLAP\Data\UGF.0.db\<APPLICATION>.38.cub.xml
    Where <APPLICATION> is the name of the problematic cube.
    After that everything is working.

  • Images and .properties(bunldes) files are not being found from my JSPs

    Hi,
    I have created .ear file by using ANT Application. And deployed into Oracle9iAS(OC4J). Here problem is that images and .properties(internationalization bundles)files are not found from JSPs.
    Here is my directory structure.
    public_html--->locale -->BusinessEntity -->businessentity_en_US.properties
    --->enterprise -->images -->knowldege.jpg
    --->BusinessEntity-->BEAdd.jsp
    in my jsp bundle(.properties)file is accessed like this:-
    <i18n:bundle baseName="/locale/-->BusinessEntity/businessentity" id="businessentity" locale="<%= locale %>" />
    in my jsp images accessed like this:-
    src="/enterprise/images/knowldege.jpg".
    In my working environment, without creating .ear file, images and .properties files are being found my JSPs. But if i create .ear file and after deploy, images and .properties files are not being found my JSPs.
    please let me know where i might did wrong
    thanks in advance
    srinivas

    Hi i am again. Here is my configuration files(server.xml and default-web-site.xml)
    server.xml :-
    <?xml version="1.0"?>
    <!DOCTYPE application-server PUBLIC "-//Evermind//DTD Orion Application-server//EN" "http://xmlns.oracle.com/ias/dtds/application-server.dtd">
    <application-server application-directory="../applications"
    deployment-directory="../application-deployments"
    >
         <library path="../tools.jar" />
         <rmi-config path="./rmi.xml" />
         <jms-config path="./jms.xml" />
         <log>
              <file path="../log/server.log" />
         </log>
         <transaction-config timeout="30000" />
         <global-application name="default" path="application.xml" />
         <application name="nalluri" path="../applications/trainiumear.ear" auto-start="true" />
         <global-web-app-config path="global-web-application.xml" />
         <web-site path="./default-web-site.xml" />
         <cluster id="-1640090707" />
    </application-server>
    default-web-site.xml:-
    <?xml version="1.0"?>
    <!DOCTYPE web-site PUBLIC "Orion Web-site" "http://xmlns.oracle.com/ias/dtds/web-site.dtd">
    <web-site port="8888" display-name="Default Oracle9iAS Containers for J2EE Web Site">
         <default-web-app application="nalluri" name="Commonwar" />
         <access-log path="../log/default-web-access.log" />
    </web-site>
    thanks in advance
    wating for reply
    srinivas

  • MS Office 2007 files are not being indexed (Failed to Index)  in oracle

    Oracle is not able to index MS Office 2007 files who are having extensions like *.docx, *.pptx, *.xlsx. I googled and found that its a bug in oracle. Have they released the fixes for it.
    Request to please help me in this regard

    user10933671 wrote:
    There is no particular error it shows. The files are not getting indexed. In our application it says currently *.docx files are not index. My Oracle client is of version 10.2.0.
    Since am really new to this, can you please tell me where i can find Metalink note 732823 as am not a paid customer.
    That would be a problem. Access to patches (and MetaLink) are part of what you pay for when you buy a support contract.
    Plz help me in this regard
    Thanks in advance
    Edited by: user10933671 on Apr 15, 2009 5:53 AM

  • On my ipad3, the Skype IM is not running. All msgs i send are shown as "pending" and are not being sent out.

    On my ipad3 skype IM is not running. The msgs are shown as "pending" and are not going out.
    Also i could earlier send sms to mobiles from skype. Now that facility has dissapeared from teh menu.
    Very thankful for any help.

    You both backup your iPhones on the same Apple ID, so when she restore her iPhone it pulled the data from the last backup (your iPhone).  She would need to erase her iPhone and restore from her back up. Take a look at this link in the restore section, http://support.apple.com/kb/HT4859

  • QT files are not being played at the right height on laptop - why?

    Hello eveyone,
    The QT files imported in my MacBook pro are HQ but are being played 1280 x 405 (for the length of the screen, but not at the right height). I can't even play view them with the Actual file feature. The Movie Inspector tells me the clipes were shot normal (1920x1080) yet I can't se them properly.
    I tried on a different MacBook pro and I have the same problem.
    Does anybody know why? What should I do?
    Thanks!

    Actually, there is no problem with the original files.
    Since I do not know how you came to this conclusion or if it is correct, my first thought is, "Show me the proof." I.e., post a captured image of the "Inspector" window for the player you are currently using. This will tell me which QT player you are using, whether the display is controlled by scaled dimension or aspect ratio settings, whether the file was encoded anamorphically or non-anamorphically, and whether the encoded aspect ratio matches the current display aspect ratio. It won't tell me the true aspect ratio of the video but a look at people and objects in a single video frame will normally disclose whether or not the display aspect is reasonably close or not.
    If I import them in say Final Cut Pro, I can see them properly...so it's only the Quick Time on our laptops that display the clips wrong.
    This isn't really helpful since FCP has settings that allow the user to both change and scale display dimensions and aspect ratios. QT 7 Pro will allow you re-scale the aspect ratio of a display but not alter its encoded aspect ratio while QT X will allow you to resize the display scale but only in reference to its encoded aspect ratio. Neither will allow you to display a file at dimensions greater than your current video card settings (i.e., where actual dimensions are greater than screen display resolutions for the encoded aspect ratio). In a similar manner, "fit" and "fill" option availability will also depend on the device/player and available screen resolutions/aspect ratiios which you have yet to indicate for either platform previously mentioned.
    The full length of the screen, but not the full height... Do you have any advide on how to get the settings done? I looked into the QT settings and coulnd't find the right button/panel...
    As previously stated, the first step is to determine if the files are being displayed correctly—i.e., at their correct aspect ratio for the allowable display space available for the current screen resolution available on the platforms being used for viewing. For instance, are you viewing in the full screen mode, or with menu bar being displayed and/or with the dock in or out of active display. These settings plus the video card screen resolulution will determine the maximum number of viewing pixels available fort the display height. Once the scale height is set by the QT player, then QT app will scale the display width to what it believes is correct display setting. If the aspect of the display is correct for the scaled height and width, then the file is being displayed correctly at the maximum display height available and there is nothing wrong and nothing to be corrected either in the file or the media player other than your desire to play a file at dimenensions larger than available for your display. (I.e., this is equivlent to saying you want to display a 52 inch diagonal picture on 32 inch HDTV—"it ain't gonna happen."
    On the other hand, if the aspect ratio is incorrect for the maximum display height available for the app, system, and platform being used for viewing, then all of the other things I mentioned come into effect with regard to correcting the embedded display settings within the file.
    Example: If i take an anamorphically encoded 1440x1080 (1920x1080) file and display it on my monitor set to a resolution of 2560x1440, then I can display the file at its "actual" display size (1920x1080) or even scale it to 2560x1440 (Full Screen Display mode) but if I reset my monitor to a  4:3 aspect resolution of 1600x1200, then I cannot play the file at its actual 1920x1080 display resolution since its width is limited to 1600 pixels and when the 16:9 aspect ratio is applied to the 1600 pixel display width, the display height is limited to 900 pixels in a "Fit to screen mode."
    If your source file was recorded at 1920x1080, then the file's aspect ratio is 16:9 (1.78:1). However, your 1280x405 screen size implies that either the file is now being displayed in the "Fit" mode with a changed aspect ratio of 3.16:1 (1280x405) or that you are viewing the file in the "Fill" mode which chops off the top and bottom of your 1280x720 (1.78:1) display. (I.e., the "Fit" mode will scale the display at its current aspect to fit within the available display area and yet allow you see the entire display area as a "scaled view at the correct aspect while the "Fill" mode scales the video to fill your entire screen even if this means losing the top/bottom or left/right portions of the display area when the monitor resolution aspect ratio and video display ratio are not the same.)
    Therefore, if your file is correctly formatted as you claim, use the "Command-F" QT shortcut to view the file at its largest available dimensions at the correct aspect ratio on any platform and using either the QT X or QT 7 player. (Don't forget to set the QT 7 "Full Screen" preference.)

  • Tuxera driver and tftp not being pushed out

    Hi all: I have three ZCM 11.2.3a servers running on OES2 SP3, one primary and two satellites. The satellites each live in a branch office connected via P2P T1's. Last week I installed the tuxera NTFS driver and have successfully set it up. I also pushed it out to one of are satellite servers (along with sync'ing tftp to that same server), but I cannot push out the driver nor sync tftp to the second satellite.
    Any suggestions on how to fix this? Thanks, Chris.

    Let me ask.
    Anders: Thanks for the reply. After some looking around and reading,
    I discovered that content replication was not running on the satellite
    server not receiving the tftp updates. I kicked replication off via
    command "zac cdp replicate" and that solved the problem.
    BUT, I also discovered the content replication is not working properly
    on that same satellite server. "zac cds" shown no schedule or throttle
    rate on that "broken" satellite server while on the satellite server
    that did receive the tftp files correctly shows a schedule and throttle
    rate. We define the schedule and throttle at the primary server level
    (default) and the satellites are set to use the default, so I am not
    sure what is broken.
    Chris.
    >>> Anders Gustafsson<[email protected]> 1/3/2014 7:08 AM
    >>>
    > but I cannot push out the driver nor sync tftp to the second
    satellite.
    What happens when you try?
    Anders Gustafsson (NKP)
    The Aaland Islands (N60 E20)
    Have an idea for a product enhancement? Please visit:
    http://www.novell.com/rms
    Anders Gustafsson (NKP)
    The Aaland Islands (N60 E20)
    Have an idea for a product enhancement? Please visit:
    http://www.novell.com/rms

  • Files are not being copied to the bin-debug folder

    All my assets swfs are in a folder named "assets/swf" under the "src" folder.
    The "Copy non-embedded files to output folder" is checked. BUT the folder is not being copied to the bin-debug...
    This is also true for Icons folder (Also under "src")
    Any idea why?

    Bump!
    comon I can't be the only one with that problem...

  • Group Policy not being pushed out

    HI,
    I have a problem with Group Policy updates.  The domain controllers are Server 2008 R2 and the clients are all Windows 7 64bit.  It looks like the clients are not updating their group policies.  We've recently added a certificate for our new
    corporate wifi.  During testing we used gpupdate /force and the computers installed the certificates.  It has been several weeks since the GP was published and we have announced the new wifi.  Users are still being prompted to accept the certificate
    even though they should have received it from the GP.  If I try to do a RSOP, of a users computer, I get "The RPC Server is unavailable"  Any ideas on how to fix this?
    Thanks
    Ron Soulliard
    Ron Soulliard Systems Administrator Polaris Ventures

    Group Policy is always retrieved by the clients. If a client sees a new GPO that is applicable to them, it will grab it and apply it.
    In the GPMC, can you run a GPResult for a computer that hasn't gotten the GPO? You might also want to check out this list of common GP issues:
    http://deployhappiness.com/top-10-ways-to-troubleshoot-group-policy/
    If my answer helped you, check out my blog:
    DeployHappiness. Subscribe by
    RSS or
    email. 

  • Loaded itunes and its blank (like a brand new user), all my files are not showing!

    Loaded up my PC this morning and then started iTunes as per normal but itunes loaded as if It was the first time I have used it, nothing at all (I have 15,200 songs along with all my iphone data ). I use iTunes every day, last time was yesterday afternoon. iTunes does show me logged into with my account and i can access the itunes store. I have restarted the computer and nothing changes. I have not done any system updates on either the PC or iTunes. Im not going to re sync my iphone or ipod incase it syncs with it and removes all the files/data.
    Any suggestions please!!

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    In the unlikely event that your media has been wiped from your computer see Recover your iTunes library from your iPod or iOS device.
    When you get it all working make a backup!
    tt2

  • M2v files are not being read on my  new mac.

    I installed quicktime pro, dvd studio pro 3, final cut pro 4...and my m2v files will not play in quicktime or the preview window. I get a pop up window saying, "Movie could not be opened. not a movie file." With any of those programs installed, shouldn't mpeg-2 codec be installed automatically? I plugged in my external HD with all my movies on it back up to my old g4...and they play fine there. I noticed there was a problem on the new mac when i tried to import them into DVD studio pro. So how do i get the m2v files to be viewable in quicktime and in DVD studio pro?
    Thanks,
    Tony

    You must also install the MPEG2 playback component. It is also a good idea to use MPEG Streamclip which has some nice features for MPEG.
    http://www.sjoki.uta.fi/~shmhav/SVCDon_a_Macintosh.html#edit_convertMPEG

  • Is icloud supposed to push music from cds that I downloaded to my pc? The cds are in my itunes library but are not being pushed to my ipad

    Any help is appreciated.

    badolin wrote:
    When I delete songs from iTunes, iTunes often asks me whether to keep or trash the file, but often it does not.
    First, I do not really know why it does not always ask me what to do with the file itself. Any idea?
    iTunes will ask you if you want to keep or trash files when
    (a) you have +keep iTunes media folder organized+ enabled in preferences > advanced
    (b) the files are in your iTunes music (or media) folder in <MacintoshHD>/users/<yourname>/music/iTunes
    Second, since iTunes does not always ask what to do with the file, my iTunes library is currently filled with ghost files of songs that I have deleted from iTunes. Any idea how I could locate and delete these files?
    try this:
    _*Music Folder Files Not Added v1.1*_
    This application will list the file paths of the files in your designated "iTunes Media" folder which are not in iTunes' library. Additionally, you can select a different parent folder and its contents will be compared to the iTunes library. Options to Add a selection of found files to iTunes or move them to the Trash.
    JGG

  • When uploading large file from network, all other requests are not being sent to server

    In our application we are facing a weird scenario in which when we try to upload a huge file(600+ MB) from network, all other requests(AJAX) are getting blocked. But when the same file is being uploaded from local location(E drive) then everything works fine.

    How are you uploading the file via network?
    If you are troubleshooting the network bandwidth? or the threads where one process takes precedent over the other you will have to troubleshoot the QoS of the network you see this on.
    To give a better visual please use Firebug or the Web Developer tool called Network to analyze the requests. The "XMLHttpRequest" will give better clues for Ajax. Reference [http://ajaxian.com/archives/ajax-debugging-with-firebug]
    There may be a about:config option that allows mutithreading or max persistent connections per server you can check.

  • !!! Audio files are NOT being saved anymore !!!

    Garageband does not save my recorded audiofiles anymore.
    Everytime I try to reopen my project after saving, it just loads the software instruments but tells me everytime that "audiofile XXX.aif not found".
    I reinstalled Garageband, however, I'm still stuck with the same problem. When I open the package content of projects i've worked with some time ago, I can find the audiofiles. But all the Garageband files I saved in the last week, are very small in size (1,3 mb as opposed to 150 or so) and apparently don't include the audiofiles anymore, whatsoever..
    Can somebody help me out or is familiar with that kind of problem? I've pretty much tried everything in my knowledge, for instance to  archive the project, but nothing has worked so far. A friend of mine said that it's probably a bug of some sort, but how can I get get rid of it?
    I'd really appreciate your help. Thanks alot in advance.
    podxt
    PS: I'm using Garage Band 5.1 (iLife 09) on Mac OS 10.6.7 (Mac Book Pro)

    Yep, it was a permissions issue which was solved by making sure we both had read/write privileges.
    Somehow, though, it messed up privileges on my log-in for downloading podcasts. I was infromed that I didn't have enough privileges eventhough I had just made sure that permissions were set correctly.
    I managed to find the answer here: http://discussions.apple.com/thread.jspa?threadID=1712753
    For some reason on the download:podcast folder my privileges had vanished.

Maybe you are looking for