All Ports/Plugins Do not work. Compaq Presario SR5233WM Desktop PC

Hello,I am here today With a problem of Mine that I can't seem to fix on my own.I have the Compaq Presario SR5233WM Desktop PC And I have Not used it In about 10-12 months And I have finnaly turned it on to Try and use it for some stuff and I plugged it in the wall And It starts up normally no beeping sounds or nothing.So After I did that I plugged the Blue video cord into my PC and my monitor And Before this I rememberd My USB ports wouldnt work And I could not test them out again because my video did not seem to work,I had asked around and They said something about my Drivers Need Resseting? I kept on Getting different answers when I ask so I came here. So to sum everything Up. How do I reset my drivers Without Video And/or What is the problem and how to fix it with the ports not working..Thanks for your time.

Hello again ZhayneW,
Thank you for the updated information on your issue. I would like you to try the steps I am providing you below in order until your graphics return:
Step 1. As you have tried different monitors I would like you to try different cables. The cables that go from your monitor to your computer could be the issue as well. According to the Compaq Presario SR5233WM Desktop PC Product Specifications page your computer has the IPILP-LC (Lancaster8) IPILP-LC (Lancaster8) and has following I/O ports with number 2 being a VGA connection and number 7 being the USB ports you state do not work. If you are using a VGA cord to connect your monitor to the computer that is the cord I would like to see replaced or swapped out with if possible. If you have already done this move on to the next step and ensure you let me know in your next post.
Step 2. Turn off the computer and unplug the power cord and open it up and place your had on the power supply for about 30 seconds to drain any electrical charge you may be holding. Now on the motherboard on the front (opposite the I/O connection indicated above) left hand side you will see the following jumpers:
These are the jumpers you need to use to clear the CMOS on your computer. Now on the off chance that your USB and Intergrated graphics have been disabled in the BIOS I am going to get you to clear the CMOS settings by moving the jumpers to look like the image below:
Leave the jumpers in this position for about 10 seconds and then return them to their original position. Reassemble the computer and do not plug it in until it is totally back together. If this was successful your computer should boot up and your display should be back.
Step 3. At this point the issue appears to be a physical issue and I think it would be best if you contact HP Technical Support for repair options. You could also go to a local computer repair and look to get it repaired as well.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

Sound Card and Wifi device Not working - Compaq Presario CQ60 -109EM AMD Sempron

I need a driver for my new note book Compaq Presario CQ60 109EM for Windows XP sp2 operating system.
It was on Vista Home Basic. I hated it because it made the computer ran very slow, i downgraded to XP Sp2
by myself, but now i am getting issues with all drivers. Everything is not working, the worse one is the sound
card and wifi device are not working event not detected by xp. Please help me.

grr i have the same problem, my laptop is the same model as urs. Go to Nvidia.com for the graphics card driver, the graphics card for our laptops is the nvidia geforce 8200 m card, just search it into the download section (it will ask you to). I cant get the internet working but im usin a usb modem. The webcam can be activated by going to the start menu and right clicking my computer and going to the manage option from here go to the device manager.
Go to the yellow section and it will say other devices it will say hp webcam now download a youcam driver or whatever and right click on the hp webcam
and select update driver click on this time only and select download from a spesific location and select the webcam driver it will hopefully work and be removed from the yellow section. now using a webcam veiwer you can use it. Thats all i know so far but i really would like to get my sound working mainly because on xp on this laptop it is pretty powerful for games as i can run crysis at medium settings at an exeptional level but obviously, NO SOUND GRR.....

All Adobe plug-ins no longer work or install under FF 3.6.6

As soon as I upgraded, Adobe Reader and Adobe Flash stopped working, with a message saying I needed a newer version. When I tried to install those, however, I get an error message saying additional plug-ins are needed to continue. When I click to load those, I get a message saying it can't be done because some file is missing, so try a manual install. Which, of course, also doesn't work. Because of my work-related use of the Internet, the PDF reader, in particular, is a necessity. So what's wrong here and how is it fixed?
== This happened ==
Every time Firefox opened
== I upgraded to 3.6.6

Hi, luanna.
This is a long shot but have you checked your iLok? Are the licences still on it? Has it been pulled out of the usb slot or bumped?
I've occasionally had trouble with mine suddenly deciding not to work.
I had to reload the licences from the iLok site and the problem was fixed.
On the same subject: have you plugin licences expired for some reason?
These, as I said, are longshots, but a malfunction iLok could cause what you're describing.
Another possibility have you started running either OS X or Logic in 64 bit? If so, plugsound might not be compatible.
Hope that you fix the problem.
Scorpii

How about telling us in advance what programs or plug ins will NOT work with the new Firefox. I just lost my "safe search" feature with AVG, and I think that's sort of important!

Just upgraded to Firefox 6 (which I like, by the way), but when I upgraded to 5, I lost the gaming feature when I installed AVG, and now I've lost the AVG safe search feature, which I think is very important considering that I have grandkids that use my computer,
How about telling us in advance (and I'm running Firefox, so a link would be easy) whether or not we're going to lose an important feature like the one I lost?
So, how do I get back to Firefox 5 without uninstalling and reinstalling so I can have that safe search feature back?

Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail

Screen not working, Compaq Presario CQ62-215DX

Hello,
My Notebook screen is not working. My notebook boot up fine. the lights and the fan is working. When I plug the external VGA to my lcd screen, it works fine. Only the notbook monitor is not working.
which part in this case that needs to be changed?

The display panel.
http://www.ebay.com/itm/COMPAQ-PRESARIO-CQ62-215DX-LAPTOP-LCD-SCREEN-15-6-WXGA-/180579626928?pt=US_L...
It is easier than you think to replace:
http://www.youtube.com/watch?v=E0ggjZTRQhQ

Since my last Photoshop BRIDGE update and PS CC2014,. My PS C6 is Perturbed. I can't not open all filles. PS Will open with the CC 2014 This OK.But I don't have all my Plug ins. Could you setting All My Plug ins in PSCC2014

Since my last Photoshop BRIDGE update,. My PS C6 is Perturbed.
I can't not open all fills. PS open the CC 2014 This OK.But I don't have all my Plug ins
Could you setting to All My Plug ins in PSCC2014.
The Others.:
I can't Install Photoshop Air .
Will you please help me
<Removed by Moderator>

Moving this discussion to the Photoshop General Discussion forum.
Nicolas1944 please be aware that you are posting in a public forum. I have removed your e-mail address from your previous post. You can also work directly with a member of our support team at Contact Customer Care.
The community in the Photoshop General Discussion forum should be able to help with your current difficulties opening files in Photoshop CC 2014.

AU Manager insists on verifying all my plug-ins before loading every time, not just first load.

Why does the AU manager insist on verifying all my plug-ins each time it loads in Pro X ?
Really annoying and time consuming.

Quit Logic Pro X
Delete the Audio Unit cache
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Caches in the "Go to the folder" field.
Press the Go button
Remove the "com.apple.audiounits.cache" file.
Restart your Mac
Launch LPX
It should do one more full rescan and then that should fix the issue...
If not then let us know please...

Plug-ins Don't Work in Reader XI; Work Fine in Reader X

We're looking to upgrade from Reader 9.x to Reader XI. A bunch of us in IT have been running Reader X without issue for some time so we didn't anticipate any problems with XI. I tested the upgrade process on a machine with 9.x and although it worked fine, none of our add-ins worked. I performed the following on a machine with XI with no positive results:
Performed repair or 'modify' installations of the applications in question that load add-ins/plug-ins into Adobe
I verified the .API files were in in the proper location
One plugin (caseMap) goes into reader\plug_ins
Another plugin (Interwoven) goes into reader\plug_ins\Interwoven
Verified protected mode was disabled via registryreg add "HKEY_USERS\DefUser\Software\Adobe\Acrobat Reader\11.0\Privileged" /v bProtectedMode /t reg_dword /d 0 /f
Again: Going from 9.x to X we don't have a problem, and usually adding the .API file is all that's necessary to get the plug-in working again. But when going from 9.x to XI or X to XI, the plug-ins no longer work.
Has something drastically changed between X and XI that would make these add-ins cease to function?
I've reached out to the vendors & am awaiting responses. In the mean time, is there anything I failed to check or something else I can do?

Thanks for the response.
We tend to not assume it'll work & blindly fire off updates. You see, when we (IT Only) upgaded to X from 9, the new 'protected mode' feature caught us off guard. We assumed we had done something wrong with the packaging and so spent a few days making sure we crossed our t's and dotted our i's before escalating to the vendors. And when we reached out they came back with a very simple "ohh yeah just check off a box", making us feel a bit foolish. I wanted to be sure there wasn't some other new measure put in place to further try to secure Reader.
As it turns out,
LexisNexis had to update their package for CaseMap 10 for Reader XI, and they have no plans to patch earlier versions.
Autonomy / Interwoven is set to release FileSite 8.5 SP3 Update 6 in Q1 which will support XI.
As you stated, vendors have to produce updates.

Plug Ins for Orchestra work

What are the plug-ins you find work best for orchestra production (I use VSL), and do you tweak the standard settings on them to produce the most realistic sound?

Now lets go back to your question,
1) you have a good arrangement, that means the parts do complement well
2) you have good samples (VSL)
3) you play the parts on your keyboard - not mechanically, not quantized.
first problem: you play all parts by yourself, no interaction between the musicians. In an orchestra (at this point) the musicians would try to get a "tutti" sound, each instrument has to "fit in the mix". Thats difficult, when you have to do it part by part.
4) Your parts are all recorded. Now you will pan the parts like an orchestra is positioned.
5) Creation of sound. Lets see how an orchestra is recorded normally. You would use a pair of omnidirectional microphones. Recording in AB which produces many phase differences. This is how the room will be created. Rarely you will see an AB-recording.
You would use spot microphones for some groups and solo instruments of the orchestra. These spot microphones will be added to the AB-main-microphone, panned like you hear the instruments on the AB-Mics.
To create a realistic sound with virtual orchestra you first will have to create that tutti room sound with a good true stereo reverb. Pan your sound sources like a real orchestra and add some reverb.
In a real orchestra recording, the spot microphones would bring out some details of specific instruments and bring the solo instruments to the front.
I would suggest to use the sends of the instruments-channels to add some reverb. Less reverb for the instruments in the front, more reverb for the instruments in the back. But reverb is not the whole thing. Room is created by volume and phase differences. If you want your trumpet to be placed to the right you should not only pan it to the right but also use a sample delay to delay the left channel of the trumpet by a few milliseconds. This will sound much more realistic than just panning (which only adjusts the volume of the right and left channel).
The ear is very sensitive for phase differences.
And its even more complex since orchestra recordings are normally done with a lot of spot microphones, so there will be a lot of phase differences (which sometimes also may be a problem).
A sound engineer who is recording classical music would never use compression or Eq. He would choose the best microphone for each instrument. Compression kills the dynamics, although you will hear some compression of orchestra tracks in the cinema.
You may use some eq anyway. In an orchestra a musician will hear which frequencies and sound is needed and adapt the sound and volume. When you play all instruments by your own you will have to do some fine tuning. If there are instruments that kill each other with the same frequencies you may clean the picture with eqs.
Hope that helps,
Eddie

Where are all the plug-ins?

Hi
There seem to be quite a few very experienced InDesign SDK programmers that hang around the forum. Which leads me to my question, where are all the plug-ins you guys have been creating. Looking around, there only seems to be about 50 commercially available plug-ins, so where are the rest of them. Do companies hire programmers for in-house plug-ins is that not overkill.
Besides all this, I understand that nobody (including myself) would want to give away secrets about what type of project they are involved in currently, but maybe some of the guys here could tell us who they worked for in the past, how long involved with InDesign SDK, and what type of plug-in they've created.
I realize in this forum, its basically professionals and not just hobbyists, making it harder sometimes to get replies, but maybe some of you will share a little something in this faceless screen-named avatar world.
Steven
P.S. self-employed creator of idrtl plugin @ http://idrtl.scriptui.com

Hi Steven
Many plug-ins are distributed as a part of bigger systems, i.e. CMS. Maybe thats why you've heard only about 50 commercial plugins.
Regards
Bartek

WMP plug-in does not working on Mozilla Firefox 4.0 on Win 7 as it was working on 3.6

on Mozilla Firefox 3.6 the above mentioned plug in was working on Windows 7. After updating to Mozilla Firefox 4.0 the plug-in does not working so i cannot hear some web radio stations e.g. www.melodia.gr

I solved this by turning off tamper protection in NAV 2010. The Firefox immedately updated. I understand virus scanners/anti spyware program like spybot and SpySweeper can interfere with updates. Also Comodo AV. It seems to me that nything that protects over all system setting is worth looking at.
I am not an expert. Do not forget to turn back on anything turned off to allow update'''

Plug-ins won't work with aperture 3.5.1

Just updated to aperture 3.5.1 and now none of my plug-ins won't work what can I do to fix this problem. Any help woud be great.

How do they not work, error message, crash, etc?
What plugin and want Aperture and OS versions did you upgrade from?
In general if after an upgrade you have a problem like this you should check the developer sites for updated plugins designed to work with the new version of OS and Aperture.

Silverlight plug-in does not works in FireFox 4 - beta 7 ( Mac OS 10.6.6 ) !!!! What is the problem ? I don't have any installed add-on !!!

Hi every one
Silverlight plug-in does not works in FireFox 4 - beta 7 ( Mac OS 10.6.6 ) !!!!
I don't have any installed Extensions except "Better GReader" and "Video Helper" !!!
I have problem with Seesmic.com and installing applications that required Silverlight !
I installed latest version of Silverlight many times.
Please help me.
(I don't have any problem with Safari or other Web Browser.)
Thank You all.

Silverlight only supports non-64 bit versions of Firefox on OSX (and from Firefox 4 onwards we're shipping 64-bit Firefox to 64-bit OSX users) and unlike with other plugins, we can't just start a 32-bit process to run it because of issues with the silverlight plugin architecture. We're working with the Silverlight team at Microsoft to get those fixed but it's essentially waiting on them.
(Or you could try to pressure them into releasing a 64-bit Silverlight for Macs.)

Real player plug in does not work

I have the latest version of Firefox and I have real player configured properly to work with the Firefox browser. I can use the Realplayer plug in to download videos via IE7 but the plug in does not work with Firefox 5. I followed all the troubleshooting listed on the Mozilla support page and the issue remains. Any help is appreciated. Thank you.

You don't say on what Mac, and you haven't actually asked a question, but perhaps this might be helpful:
The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version, 10.2.152.25 or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Note that the latest Flash Player update only works on YouTube with Safari in 32 bit mode - until YouTube correct this.
* Unhelpfully, if you want the last version for PPC Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. The first one on the list, Flash Player 10.1 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/865/cpsid_86551.html#prob1=uninst,os=m10.6,
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

E3000 ports 2 and 3 not working

I have 4 computers hooked up(wired) to the E3000, i noticed that the ports 1 and 4 work(have internet and are lit) and ports 2 and 3 do not work at all. Cannot accuses routers page along with that. I did a clean install(factory settings/restarted) and tried the same ports, they still do not work. I looked at the routers settings, the ports are not blocked, is this a defective item?

First press and hold the reset button on the router for 45 - 60 seconds and then reconfigure the router from scratch. Now the ports should work and even after re-configuring the router, If the port number 2 and 3 is not working then it's a hardware fault.

All Ports/Plug​ins Do not work. Compaq Presario SR5233WM Desktop PC

Similar Messages

Maybe you are looking for

All Ports/Plugins Do not work. Compaq Presario SR5233WM Desktop PC