All ports type 1 after using old type 1 Belkin hub

I needed to print on an old parallel port hp1100 and plugged in an old Belkin USB hub (type 1 usb) with parallelserialmouse ports and installed the driver - although afterwards I followed the Belkin XP uninstall instructions - now all my usb ports act as type 1s and the isight no longer works in windows. First of all: boot camp repair - several times: no joy. Tried uninstalling usb drivers etc in hardware manager so that windows could rediscover the hardware - managed to disable the keyboard and touchpad & its button! - Fortunately the power button instigated what appeared to be an orderly shutdown and I got the keyboard back on a reboot and from there a little toing and frowing in the device manager with changing the mouse driver from the two options given, I got the touch pad and then its mouse button back. I am not inclined to experiment further just yet but suspect that I will end up doing a complete re-install of Windows.
Knowing how a healthy set of usb hub drivers in a MacBook Pro (in my case 17inch high def, 2.6GHz, 200Mb) should look would enable me to force the use of the driver that I specify. As I understand the situation there are several internal usb buses of which one is a type 1 and serves keyboard and touchpad whilst the isight internal camera is on a type 2 bus and thus in my case is now inaccessible to Windows.
Am I right in thinking that all the type 2 usb host controllers and usb root hubs should use the Orange Ware Corporation drivers ousb2hub.sys+ousbehci.sys and ousb2hub.sys respectively.
If you look at which drivers the usb host controllers are using and they are simply usbhub.sys, usbport.sys, usbuhci.sys and usbui.dll
from MicroSoft then that may be the problem.
At present the device manager shows at the highest tree level two USB controllers
first one has a Generic USB hub (driver: C:\WINDOWS\system32\drivers\usbhub.sys)
then five Standard Universal PCI to USB Host Controller (drivers: usbhub.sys, usbport.sys, usbuhci.sys and usbui.dll)
a USB composite device (driver: usbccgp.sys)
a USB mass storage device (driver: USBSTOR.SYS)
five USB Root Hub (drivers: usbd.sys and usbhub.sys)
The second USB controller
Two PCI Class USB 2.0 Enhanced Host Controller (drivers: ousb2hub.sys and ousbehci.sys)
Two USB 2.0 Root Hub Device (driver: ousb2hub.sys)
Any ideas?

For what it's worth. I have now managed to do a system restore to before the old usb hub install - unsigned driver install reported in the restore point description. - I hadn't taken into account that Norton Internet Security 2008 by default protects itself from changes which includes the registry - Temporarily unchecking the protection in the Norton I.S. options (whilst disconnected from the internet) allowed a successful restore. Everything appears to be working. I had to do a Windows Security patches update to recover those that were rolled back.
The system restore was the first thing that I tried originally and when Windows reported that it was unable to do one I put it down to the Mac, however it was a purely Windows + Security software issue.
In the device manager there is now one Universal Serial Bus controllers entry at the top level. One Generic USB hub (usbhub.sys), seven (yes seven(7)) Standard Enhanced PCI to USB Host Controllers (usbehci.sys, usbhub.sys, usbport.sys, hccoin.dll & usbui.dll)some omit the hccoin.dll and usbehci and have usbuhci. There are couple of composite devices (usbccgp.sys)and seven USB Root Hubs (usbd.sys and usbhub.sys) and no sign of ousb2hub.sys and ousbehci.sys or PCI Class USB 2.0 Enhanced Host Controllers.
I hope that this may be of use to anyone who comes across this post.
PS - the Isight built-in camera is now working again under Windows again.

Similar Messages

TS1702 My problem started after installing smartsync which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crash after using them for awhile. I have remove the smartsync app but my phone still behaves the sa

My problem started after installing "smartsync app" which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crashed after using them for awhile.While using my apps, they will black out after a little while and the phone returns to the starting page. I have removed the smartsync app but my phone still behaves the same way. At the same time the dates that accompany my messages changed to another language. How can these be rectified?

Eek. Sounds like something in the app caused some serious software issues. You can try a hard reset, but I'd imagine you're probably going to have to do an iTunes restore to get it running right again.

All sound randomly dissapearing after use of about 2 hours or so

My sound randomly stops working after a few hours of use. I need help because I tend to be in long-term Skype calls and when I'm editing or watching over a video for business purposes my audio randomly cuts out. I have found a way to fix it and one way
only and that is to reset my PC. Is there any other solution?

Please provide us with your Event Viewer administrative logs by following these steps:
Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file to Onedrive or a file sharing service and put a link to it in your next post
If you have updated to win 8.1 and you get the error message "the system cannot find the file specified" it is a known problem. The
work around is to edit the registry. If you are not comfortable doing this DONT. If you are, backup the key before you do
Press Win+"R" and input regedit
Navigate to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/Analytic"
Wanikiya and Dyami--Team Zigzag

Mac pro stopped charging after used old OS X dvd during boot camp partitioning

Macbook Pro, 15", Mid 2010, 2.4GHz i5, OS 10.6.8.
Need to split hard drive and install (via boot camp) Win 7 as want to run windows only CAD software.
During partitioning, boot camp asked me to insert original install discs. Couldn't find discs (don't recall ever seeing them)... so borrowed "15" Mac Book Pro Mac OS X Install DVD" disc from neighbour... inserted that (fingers crossed)... and completed partitioning.
But then found Mac switched off when I accidentally knocked power cable out of the Mac. Also note clock/caldendar needs resetting on each power up now, mac doesnt charge anymore (according to icon/batt status) running when on mains power only ...
Have just upgraded to Lion 10.7.2 (as wanted new features and hoped that might sort problem) but no improvement. Guess I've screwed up some of the low levels drivers....!?!
Too late to use time machine or time capsule as only just learnt about them!
Can anyone advise please?

You cannot use discs from another Mac unless they are exactly the same OS build as yours, for the exact same model as yours. The discs contain only the drivers for the hardware on that Mac, and there are other variants in software.
It's a minor miracle you can still boot at all.
Your own original discs will probably still be in the box, in a small box labeled 'everything else' (or something similar) which also contains the warranty booklet and a welcome to OS X guide.
You'll need to find those and start from scratch with a re-install to repair the damaged power management software, then do the Lion upgrade again.
Unfortunately, it may not work as simply as that, as getting back to SL from Lion isn't straightforward; just check the forums for the multiple threads on the issue.

I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router....any ideas?

I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router, and used msconfig to bring up each service individually to see if there is an effect.Flash and iTunes have been re-installed ...any ideas?

I agree. I don't rely on iCloud as a backup, that is what I have my portable hard drive for. Its 500 GB so I can hold my entire iTunes library several times over on it. I have all my movies on my hard drive, but somehow "The Mist" got deleted off of my hard drive, so I figured "Well, the option to redownload an already purchased movie is available through iCloud, I'll just do that!"
And permissions and download availability have nothing to do with it, the movie's still there, it still allows me to redownload it. The only problem is when I click download, I get that message.
And nobody else uses my computer, but I do have multiple accounts authorized on it. Even still though, I am attepmpting to download it through the account I purchased it under. :/

Problem using logical port type "ABAP"

Hi, my problem is that I have to save a txt file with a certanly format who feeds from an IDOCs that is sended nowhere.
Instead of using a BADI the client wants that every time a PO is liberated an IDOC has to be triggered and it has to save that txt in a path, but that IDOC is not sended anywhere is just for saving the file. Dont ask why... they want to do this approach.
So I created a logical port of type ABAP, copy the function "OWN_FUNCTION" as a template and in my custom function I parse the IDOC and save the file... it works. My problem is that the IDOC is created when a PO is created but not triggered !!!
The IDOC is created with status 30 (ready to send).
What I need is that when the PO is saved the file has to be generated in the server but the function is not triggered. I try running the Program RSEOUT00 and the IDOC is not found (dont know why) the only way I can trigger the IDOC is via BD87.
Someone could help me, I dont know why the logical port type ABAP is not triggered. all my setting in WE20 is right.
Thx

The problem was in the WE20, the radio button was in mode 4 (collect IDOCs) instead of 2 (send inmediatly)

RV220W - Wrong NAS Port-Type using RADIUS for 802.11

Hi everyone
I am attempting to configure the RV220W (Firmware 1.0.6.6) for dot1x authentication over a Windows 2008 based RADIUS Server (using Remote Access Services).
The RADIUS settings on the RV220W are pointing towards that W2008 Server. The SSID has been set up for "WPA2 Enterprise" Security.
All the authentication attempts arrive at the server, but they fail to get authenticated because the Cisco RV220W is not transmitting a "NAS Port-Type" and therefore, the RADIUS Server will reject the requests.
This is what the request from the RV220W looks like on the server:
And this is a request from a similar Zyxel Router:
How can I enable the Cisco RV220W to send a NAS Port-Type (19, Wireless 802.11)?
Thank you for your support!

The RADIUS server in OS X Server is a standard FreeRADIUS implementation with Apple's own custom GUI frontend for configuring it and which only allows adding AirPort base-stations. In Mountain Lion Server it is even limited to a specific configuration for the AirPort base-station.
However if you follow the normal command-line instructions and steps for configuring FreeRADIUS then it will be possible to add any type of RADIUS client.
While as far as I can see by manually configuring the FreeRADIUS server in OS X Server should enable you to do what you want, most people chose to configure Squid to use either a PAM or the LDAP modules for Squid to in this case authenticate directly to Open Directory (which is of course based on LDAP).
I myself have used a PAM in the past with Squid to successfully configure Squid to authenticate users via Open Directory. I was even able to specific an Open Directory group and only allow members of that group access via the Squid Proxy Server. I then went a bit OTT and set up another open-source tool (which was discontinued and I had to fix to get working) to process the Squid logs and store them in MySQL, and then setup FileMaker Pro to connect to the MySQL database via ODBC to allow producing reports.
Unfortunately the AFP458 website had a major redesign a while ago and many previous technical articles on it are now hard to find. I had used two articles on that site to guide me through setting up Squid and the PAM on a Mac server. I believe the two articles I used are the ones listed below.
http://afp548.com/2004/09/08/using-os-x-open-directory-to-authenticate-squid-pro xy-server/
http://afp548.com/2004/12/13/squid-server-using-ldap-authentication/

Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

Select the text, and open the Appearance palette (Come on guys, text highlight is irrelevant, it happens to objects too says the OP), and see what's listed there. For a simple text object, there should only be a line item "Type", followed by "Characters", and when double-clicked the Characters line item expands to tell you the stroke and fill color. For a basic object, there should be a fill and/or stroke.
What happens sometimes, is that you end up adding extra strokes/fills to objects or text, and the appearance palette is where that will be noted. Especially when you are dealing with groups, and/or picking up a color with the eyedropper, you may inadvertently be adding a fill or stroke on top of something. You can drag those unwanted thingies from the Appearance palette into its own little trash can.

What port type should i use?

I am using Seebeyond as middleware and it sending Vehicle IDoc VEHCLE01 to SAP System.
Please help me
what should port type I need to use? Should it be file port or t-rfc port?
What should partner type need to use? Can it be LS type?
Is it ALE or EDI Scenario?
Thanks in advance.

Hi,
Yes, the Port can be a File Port (IDocs will be saved in this folder) or t-rfc port. File port should be OK.
Partner Type can be LS.
Cheers,
Bhanu

So here's my problem. I just used the "reset all settings" option, and accidentaly restored an old backup. It deleted all my photos and contacts, but for some reason I still have all the apps from after the backup date, is there a way to get it all back?

So here's my problem. I just used the "reset all settings" option, and accidentaly restored an old backup. It deleted all my photos and contacts, but for some reason I still have all the apps from after the backup date,and it also kept the notes from after the backup. The "reset all settings" option clearly says no loss of data or media, so I don't understand why some stuff got deleted. My question is, is there a way to get it back?

If you still can find a recent backup listed in iTunes/Edit/Preferences/Devices, use this one to restore from.
If there are no recent backups listed, your data is gone. Only if you included the iTunes backup folder into your computer backup routine, you could be able to restore this folder and find one of your latest backups listed again.
iTunes: About iOS backups

How to see all billing types in use at present ?

Gurus,
My comp is moving for an upgrade. How can I see the list of all billing types that are being used by the company ?
The navigation "IMG>sales and distribution>billing>billing documents>define billing types>define billing types" shows me all the regular billing types what SAP got. How can I know as to what only are in practice ?
I am sorry if this question sounds silly or weird.... am kind of new
Please help. Thanks

Getting a list of billing types is a small step in understanding what is 'in the system' in preparing for an upgrade. It's more important to understand the chain of documents - potentially starting from inquiry, all the way through the accounting document for a debit/credit note.
It's the chains that are important for the upgrade - this is for two reasons.
1. You don't test a billing document on its own.
2. Upgrade issues (95% of the time) are due to custom code - and the copy routines are often custom
What I have done in the past is start with the initial documents in the chains - and work through the chains forward to build up the scenarios, You can map these out in a flowchart - of just use Excel.
For example e.g
Sales Order ==> Delivery type ==> Billing doc==> FI Doc
ZOR LF F2 RV
This doesn't take that long - and gives a very good idea of what the real scenarios are. You will generally not get a complete answer from any use - or from the pre-existing documentation.
Depending on you controlling modules, you can also add the different accounting doc (CO, COPA, PCA, Special Ledger)
You can use SE16 as other replies have mentioned. Use VBAK (sales docs) , VBFA (docunent flow), VBRK (billing docs)

Identifying all the types that implements a particular type using roslyn syntax tree.

I have a method that takes the syntax tree of a .cs file as an argument.This method has to find all the types that inherits or implements a particular type e.g. finds occurrences of all instances of statements "SqlConn
c = new SqlConn()" because it implements IDisposable. I am using Roslyn API.

I had a system recently containing seven sequence files, approx 20 subsequences in each, and around 10-20 steps in each sub-sequence. Every step (except for the NI non-code module types) was an instance of a step type.
Each one of these steps had an Edit sub-step and a code module called through the code module adapter.
In order to make these into "wrapped up" step types it was decided to move the code module to a Post-Step substep (as also done in the NI-IVI step types) - so that developers cannot fiddle with the code prototype or module.
In order to do this I had to open all 7 of the sequence files, make the changes and then ensure that "Apply changes in this dialog to a loaded instances" was checked. This seems to sort of work, but some steps started causing Error 17502 (System Error) when you configure them (call the Edit substep). Over the course of the past few months I have had to effectively check every instance of a type to see if it works (deleting the step and replacing it when it doesnt). Other strange things happened like some of the step type instances now have the "None" (adapter) icon associated with them - but both still work.
The idea of creating a type-def of a step type is a good one, but frustrating that it doesnt seem to fully work. Why should the sequence file also store a version of the step-type - which is what is effectively causing this problem - why not make it so that if you dont have the step types installed in the type palette - TOUGH! Message Edited by RichM on 03-15-2005 06:55 AM

Need to revert to my old OS on iPad. Cannot. Tried using old backup but this Trojan horse type software has corrupted my ability to do so. Tried emailing but it bounced back unacknowledged. I was sent notice that I can't get support. Christmas 2012 gift.

New OS causing major problems. Forced to purge data and wipe iPad. Now my computer has changed. My software has changed on iPad. Tried using old backup from earlier date but Trojan horse software created by Apple has decided to stay.
Have 16gig. IPad 2 bought December 2012 for Christmas but according to Apple I am out of Apple care and would need to pay for support. When has 1 year apple care become 9 months?
Wasted an entire day trying to purge my older computer which is linked to this iPad. I reset my iPod and ended up deleting and wiping clean but it's not factory but the aggressive 7.2 which returned. I want my old OS back. Their software has destroyed my ability to use my iPad for the purposes I intended it for.
I don't do social media other than Pinterest and I want the fluffy stuff gone. They need to forget trying to get me into the clouds and fix this iPad so I can use it for real world applications.
You can only keep resetting so often. There has been hardware issues almost since purchase because it crashed several times even before updated fiasco.
Help please.

Ralph9430, thanks for responding but the fact that they don't support AppleCare on a unit less than a year old despite being an older version is wrong.
It suppose to be from date of purchase so their not taking responsibility for the maiming of people's computers and their subsequent arrogance in not removing it is going to their undoing.
We have purchased iPhones, Mac Pro, iPad, iPod touches in the nano, shuffle and touch versions in the past as well as the more solid 80gig version. I
I am still using 3G model phone and I can no longer find apps to use with it because Apple feels I don't deserve new apps.
My children are using iPhone 4 and my daughter was seeking to upgrade to the newest model when it becomes available. They are social, I am not and I deserve the software I paid for. It should always be an option.
I can tell you that this particular oversight is causing me to look elsewhere for future purchases and I will not be recommending Apple to others as I have in the past.

It should be possible to set default behavior for all file types

It should be possible to set a default action for all file types. I'm so tired of having to manually sit and say "save this file" because Firefail always defaults to "open with" and has disabled the "Do this automatically for files like this from now on."
And spare me the zealotry religious excuses for why its the fault of websites and not Firefail
''edited to remove swearing''

I do want users to have full control to be able to set any folder view they want by using Apply to Folders; I just want to set the initial/default view to Detail because that matches what the majority of my users want.
That is, what registry setting changes when I go to a picture folder, change the view to Detail, and click Apply to Folders? Having done that, I still retain the ability to change it to some other view and apply that to folders. But what registry setting
represents the change I just made when applying Detail view to all Picture folders.?
This settings is simple via GUI, but it is related a lot of registry keys, I made a test in my machine, capture the "Apply to Folders" process using Regshot tool (this is a small tool which can compare the regsitry changes after you change some
settings), and this is the result:
this is part of the registry changes, a plenty of registry keys and values need to be changed. hard to list them here. if you have interests, I recommend the tool Regshot, it can help you capture the regsitry changes.
NOTE: Please Note: The third-party product discussed here is manufactured by a company that is
independent of Microsoft. We make no warranty, implied or otherwise, regarding this product's
performance or reliability.
Yolanda Zhu
TechNet Community Support

Creating new logical ports for WSDL with several port types not working

Hi all,
I am trying to integrate some BODS webservice into the BPM. I am using CE 7.2 Kernel Version: 7.20.3710. When I am trying to assign a provider system in the application configuration I get following error:
The provider system successfully found the needed service, but its wsdl is without webservice policy. Thus the generated client configuration might not work because of different configurations between service and client (most probable a difference in the security settings). Either assign a provider system with access to wsdl with policy or manually create the client configuration.
The regarding provider system is using a communication profil where the authentication method is set to "none". Normally this configuration should work, but it isn't.
So I started to create new logical ports for each port type. But then I get the error:
Port type name of loaded WSDL does not match the port type name of the Service Reference.
I checked already the port type names in the WSDL but they are 100% the same. What I found was that the configuration is always trying to use the first port type in the WSDL. So I am not able to configure the other port types in the service group.
I also tried to do the same thing using a WSDL with just one port type and surprise it is working...
I hope somebody can help me out
Thanks in advance
Andy

Hi Andy,
Please check this Link: https://cw.sdn.sap.com/cw/docs/DOC-45012
Regards,
Naresh B

All ports type 1 after using old type 1 Belkin hub

Similar Messages

Maybe you are looking for