All Premiere exports render without sound. Help!

I've been banging my head against the wall about this.Audio (from the video and from mp3) works fine when played in the timeline. When I export... regardless of what codec and settings... there's video, but no audio.
I'm new to this forum, so if anyone can help I would definatly appreciate it. I'll send you whatever info is needed to solve the problem. Thank-you!
Jonathan

Start reading here and follow all included links and answer all 16 questions at the end of the Wiki article: Some suggestions

Similar Messages

I have a feeling this has been up here a lot. I updated ios 6 to my phone with no problems but I also back my phone up. I decided to help the wife out and update hers and something went wrong data lost. All contacts, photos, etc without backup, help.

I have a feeling this has been up here a lot. I updated ios 6 to my phone (4S) with no problems but I also back my phone up. I decided to help the wife out and update hers and something went wrong data lost. All contacts, photos, etc without backup, help.

if you have no back up in icloud or itunes the best you can do is sync with your computer and get back what you can from there

Openshot and kdenlive render without sound

Hi
It has been a long time [a few months] since I have not used Kdenlive.
When I rendered a movie with a mp3 sound track [ songs especially ] I got the film with this sound track.
Now are occuring 2 things:
The final movie is without sound [during the edit, there is no problem, I can hear the track, move it where I want, putting effects on it without any problem],
the time counter is wrong, it does not show the video time correctly, I mean the time counter will be stuck at 0 second, then will jump to 6 seconds and son on for example.
These things happened in OpenShot too, actually I tried OpenShot editing my new clip and I found these issues. I thought it was specific to OpenShot and I remade my clip with Kdenlive.
Any clue?
Thx in advance
Serge

Start reading here and follow all included links and answer all 16 questions at the end of the Wiki article: Some suggestions

I Am Without Sound - Help

I have no sound coming from LOGIC. All I have is the sound card that comes in a PowerMac G5. Nothing fancy.
I checked "Core Audio" in the Audio Drivers pop-up. I then get this warning:
The previously selected audio interface is not available.
The built-in audio inputs and outputs of the computer will be used instead for this session.
I then get sound. But this warning pops up all the time. If I uncheck "Core Audio" - NO SOUND.

You can reduce it now that it is working. If you're OK using 512 that's fine, I usually run at 128. Smaller buffers settings allow quicker response and throughput-but that has disadvantages such as CPU hungry plugs will start to crackle because they don't have enought ime to be processed. I'd go to 128 and adjust to taste. Softsynths for example will come through 4x faster. It shouldn't affect the sound as long as everything has enough time to process.
J

Premiere CS5 import avi clips without sound. How can I import avi clips with sound without convert?

Dear Adobe Forum,
I have the following problem, please help:
I would like to import avi clips in adobe premiere. All clips have the same avi codec. But unfortunately my adobe premiere does not import the sound of a few
avi clips. It is wired because about 10 out 70 avi clips which have all the same avi codec does not work with sound in premiere CS5. In the timline premiere import the video and audio line but there are no audio waves in the about 10 avi clips. additonally premiere plays the 10 avi clips in the source monitor without sound. Furthermore when I open the 10 avi files without adobe premiere they have sound, but with premiere there are no sound in the 10 avi clips.
What can I do, so that I can import all avi files with sound. I do not want to convert each of the avi files because then they have not a good quality and it is to complicated and it takes to much time to convert all files in this video project and in the other video project in my future.
Consequently How can I import all avi files so that they have immediately sound? Do I have to change some premiere settings?
Thank you in advance
Leonardo

Now I show you details of 2 files:
the first video clip which you can import with sound (works):
Video:
1280 x 720
data rate: 4259 kBit/s
total bitrate: 4387 kBit / s
Single bit rate: 29 single images / second
Format                           : AVI
Format/Info                      : Audio Video Interleave
File size                        : 63.5 MiB
Duration                         : 2mn 1s
Overall bit rate                 : 4 388 Kbps
ID                               : 0
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Format settings, GOP             : M=3, N=15
Codec ID                         : H264
Duration                         : 2mn 1s
Bit rate mode                    : Variable
Bit rate                         : 4 248 Kbps
Maximum bit rate                 : 4 001 Kbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.154
Stream size                      : 61.4 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID                               : 1
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format version                   : Version 4
Format profile                   : LC
Format settings, SBR             : No
Codec ID                         : FF
Duration                         : 2mn 1s
Bit rate                         : 128 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Stream size                      : 1.85 MiB (3%)
Alignment                        : Aligned on interleaves
Interleave, duration             : 21 ms (0.64 video frame)
the second video clip which you can import without sound (doesn't work with sound):
Video:
1280 x 720
data rate: 4278 kBit/s
total bitrate: 4406 kBit / s
Single bit rate: 29 single images / second
Format                           : AVI
Format/Info                      : Audio Video Interleave
File size                        : 69.3 MiB
Duration                         : 2mn 11s
Overall bit rate                 : 4 407 Kbps
ID                               : 0
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Format settings, GOP             : M=3, N=15
Codec ID                         : H264
Duration                         : 2mn 11s
Bit rate mode                    : Variable
Bit rate                         : 4 267 Kbps
Maximum bit rate                 : 4 001 Kbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.154
Stream size                      : 67.1 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID                               : 1
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format version                   : Version 4
Format profile                   : LC
Format settings, SBR             : No
Codec ID                         : FF
Duration                         : 2mn 11s
Bit rate                         : 128 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Stream size                      : 2.01 MiB (3%)
Alignment                        : Split accross interleaves
Interleave, duration             : 21 ms (0.64 video frame)
Consequently, as you can see, they have both nearly the same information
Both video clips have the following audio codec:
AAC
In the folder where all raw video clips exist there are a few new files with the codec ending: .AVD ("the name of the file".AVD)
But the 2 video clips mentioned above does not have any files like .AVD oder something else like that. But the first one works and the second one doesnt work.

Imported videofiles in Premiere without sound? Strange update or fault?

Did I miss something "new". Today I found out no matter what I do - if I export a sequence from the timeline and have it imported into the project it only imports the film but without any sound. With some codec I can play the clip as it should be in the windows 7 ultimate explorer but I sometimes also get automatically a HD-file and the sound files as wav as a separte thing. I never had that before. In fact what I want to do is to create a sequence from my timeline and have that as a separat HD-file to use whereever in the project. Especially if the sound is not the original one but added by myself. I have done that before and I would just get my HD-file and could play it in the preview WITH sound. Now all I get is the picture but .... like I said: without sound. That is not normal. So is that a rather useless update or a failure in the programme?
And how can I copy a sequence from a timeline and place it anywhere else on the timeline. Used to be so easy in a previous premiere version. Now copy and paste does not work at all anymore. And whenever I want to add a clip onto a layer, I have to shut all used layers, because otherwise the sound goes anywhere but where it should and might just place itself within another sound-layer.
Used to be all much better and simpler in previous editions.

So is that a rather useless update or a failure in the program?
Most likely it's operator error.
Several formats export image and sound separately. This is normal and desired for those formats, like DVD and Blu-ray.
Be sure to know what you're doing with exports, and choose appropriately.
You can copy any clips with the standard CTL+C 'copy' command and paste anywhere else in any sequence with the standard CTL+V 'paste' command. (Be sure to set track targeting first.)

HD Export/Render issues Premiere CS3

Hey, I've had this problem for a while now and just cant seem to figure out how to fix it.
A while back I purchased a Hauppauge HD-PVR for capturing Xbox 360 footage in HD. Everything works fine until I try to export the footage. Once it's done exporting and I review the video, the feed gets all messed up and pixelated at times.
EX: http://www.youtube.com/watch?v=phzsxWIM6ao
I've looked at the video immediately after capture and it appears fine. I import the video into Premiere CS3, render the work area, and review the video (while still in Premiere) and it still has no problems. It isn't until it is fully rendered and exported that things get messed up. I've tried a few different things to fix this problem (deinterlacing, frame rate, bitrate) but nothing seems to work. Any advice?
-C.L

Use different software. PR is intended for editing material from VIDEO cameras.

Since updating to iOS 6, my 4th gen iPod touch, and my 3rd gen iPad has sound in and out. Sometimes it's on, and then all of a sudden, no sound. I've tried everything from restarting to fully resetting each one starting fresh, but nothing. Please help.

Since updating to iOS 6, my 4th gen iPod touch, and my 3rd gen iPad has sound in and out. Sometimes it's on, and then all of a sudden, no sound. I've tried everything from restarting to fully resetting each one starting fresh, but nothing. Please help.

I have exactly the same problem. I have tried almost everything and I am nowhere near an Apple shop as I am working in Africa.
Did you manage to find a solution? Help please if possible. Regards Az

I am trying to install Adobe Premiere Elements 9 without success. I successfully installed Photoshop Elements 9 without a problem. The message I am getting is 'Invalid Unicode file - .\Autoplay\LangData\en_US\lang.dat'. Anyone out there who can help pleas

I am trying to install Adobe Premiere Elements 9 without success. I successfully installed Photoshop Elements 9 without a problem. The message I am getting is 'Invalid Unicode file - .\Autoplay\LangData\en_US\lang.dat'. Anyone out there who can help please?

click setup, not autoplay.

Videos exported to MP4 or .3GP without sound.

Good morning.
I have a MacBook Pro with Leopard 10.5.5 installed and the QuickTime Pro with codecs Perian. I could always open FLV and export them to .3GP or .MP4 but from a few days ago the videos are exported without sound. However, when exporting to other formats such as iPhone or the AppleTV videos are displayed without problems.
Why before exported without problems?
Can be due to the last update of QuickTime?
Thanks.
PD.:Sorry for my English.

I don't know , but an .swf will open in After Effects. If you create a new composition with the .swf you can export it to any file type that you'd like.

Ebay will not load on safari, firefox or camino, but all other sites load without any problem. Can anyone help?

ebay will not load on safari, firefox or camino, but all other sites load without any problems. Why is this? Can anyone help?

It should be: Click on Home Folder (the House) and to the right Library is shown, click on the arrow on the Library folder to reveal its contents and then click on Cookies to reveal its contents and then move the Cookies.plist to the Trash as Carolyn suggests.
Then try eBay again.

Hello, I have been exporting my photos with a watermark. Without changing any settings, half way through my day things changed, and now about 1 out of 7 photos have the watermark after export. Change you helpe me change this back please?

Hello, I have been exporting my photos with a watermark. Without changing any settings, half way through my day things changed, and now about 1 out of 7 photos have the watermark after export. Change you help me change this back please? Has anyone had this issue before?

I'm sorry to learn that you have endured the audio issues outlined in your post for almost 2 years SusanLM1! This is certainly not normal! Let's get to the bottom of this issue, first please confirm your phone model; your mention that you have the iPhone 5 but your post is on the iPhone 5S forum. Also, share the iOS version currently installed on your phone. What is your ZIP code? Does this happen mainly while you make/receive calls from a particular location (home, office, etc)?
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

I've made a movie in iMovie. Now all of a sudden the sound that I added to my video is mute. I havn't changed anything and in my other iMovie-projects the sound is working fine. What is the problem? Help!

I've made a movie in iMovie. Now all of a sudden the sound that I added to my video is mute. I havn't changed anything and in my other iMovie-projects the sound is working fine. What is the problem? Help!

Try double tapping the movie clip itself when inserted in the timeline and ensure that sound is on on the actual clip on the movie time line.

HT1657 I downloaded a movie and it plays without sound. All other videos and music play fine. I down loaded it 2x and it still doesn't work.

I downloaded a movie and it plays without sound. All other videos and music play fine. I down loaded it 2x and it still doesn't work.

Hi, thank you for your consern,
I have Window Vista...Im not to computer friendly when it comes to deep details about the systems so I dont really know if its 32 or 64 bit but I did see that it is 919 bytes.
I WAS able to see the videos before the upgrade and the flash animation does NOT rotate in red F.

I don't have any sound coming from my computer. I checked all the speakers but i still don't have any sound. help!

I don't have any sound coming from my computer. I checked all the speakers but i still don't have any sound. help!

Do you have sound coming from the audio output port using headphones? If so, when the plug is pulled out, is there a red light?
You may need a PRAM reset:
http://support.apple.com/kb/HT1379
Ciao.

All Premiere exports render without sound. Help!

Similar Messages

Maybe you are looking for