All Process Types not visible in RSPC ( process chain)

Hi,
When I go to create a new process chain in RSPC & look for process types to choose from I am not able to see all the process types.
when I go to table RSPROCESSTYPES or setting-->maintain process types , it shows all the enteries.
Am I suppose to do some steps before I start seeing all the process types in the left panel of my RSPC--process types.
looking forward to your help.
regards
Vikash

Hi Agarwal
check the table RSPCCATEGORY ..In this table check whether there is an entry for the following..
General services
Load Process and Post-Processing
Data Target Administration
Reporting Agent
Other BW Processes
if not there maintain them..
bye
Shu Moh..

Similar Messages

All document types not visible in SAP EasyDMS

Hi,
We have configured a no. of document types in DMS ( in SAP R/3). But only a few of those are visible in the SAP EasyDMS ( Web GUI). We are not able to figure out how to make those visible. I am completely new to EasyDMS. Can anybody help?

hİ,
that is very general problem, you should be more specific.
i send you , link for easy dms configuration,
i hope this helps
[http://help.sap.com/bp_bl603/BBLibrary/Documentation/223_BB_ConfigGuide_EN_TR.doc]
best regards,

How to add a button in top ribbons of ALL library types (Not just document libraries)?

Hi there,
How to add this custom button on all Library Types (Not just document libraries)?
RegistrationId="101" RegistrationType="List" adds this button to Document Libraries only - which does not work for me.
Thanks so much.

Hi,
According to your post, my understanding is that you wanted to add a custom button on the ribbon of all the library.
You can refer to the following code snippet, it would add a custom button “Site Settings” on the ribbon of all the libraries.
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<CustomAction Id="ListViewCustomization" Location="CommandUI.Ribbon.ListView" RegistrationId="101" RegistrationType="List" Title="List View Ribbon Customization">
<CommandUIExtension>
<CommandUIDefinitions>
<CommandUIDefinition Location="Ribbon.Documents.Share.Controls._children">
<Button Id="ListViewButton" Command="ListViewButtonCommand" Description="Go to Settings" LabelText="Site Settings" TemplateAlias="o2" Sequence="93"/>
</CommandUIDefinition>
</CommandUIDefinitions>
<CommandUIHandlers>
<CommandUIHandler Command="ListViewButtonCommand" CommandAction="/_layouts/settings.aspx" />
</CommandUIHandlers>
</CommandUIExtension>
</CustomAction>
</Elements>
More reference: http://msdn.microsoft.com/en-us/library/ms473643.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Request Type not Visible in CUP

Hi,
We are in the process of configuring CUP.
We have uploaded file AE_init_append_data _CC.xml into the initial system data of CUP. But Request types MITICRLC etc are not visible in CUP.
Workflows for RAR are visible in CUP-> CONFIGURATION->MISCELLANEOUS
Any clues.
Regards,

Please check if you have activated the RAR workflows in CUP-> CONFIGURATION->MISCELLANEOUS along with proper exit URIs and User ID password details.
Once these workflows are activated only then you will be able to see the corresponding details under request type, priorities etc for RAR workflows.

JDBC adapter type not visible in Communication Channel

Hi All,
I have deployed JDBC driver according to http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b4a020-4ae6-2c10-5a95-fed4ad9a4b60?QuickLink=index&… .
Driver deployed successfully and I have checked it in folder \usr\sap\xxx\DVEBMGS30\j2ee\cluster\bin\ext\com.sap.aii.adapter.lib\lib and it's found ok. But this adapter type not showing in Communication Channel only RFC and SOAP are showing there. I have restarted the server also. Can any one tell me where the problem is?

Hi Kuldeep,
Have you check the patch level of both java & abap has same ,if some thing different in Patch level of any of this it will not visible in communication channel
Check below links also
https://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
Sender JDBC adapter : data read from db but not in PI
Regards
K.N

Message Type not visible in BD10

Hi,
One of the message types is not visible in BD10. Will this appear if I add it using BD60 transaction. But my doubt is that all the message types visible in BD60 are again not there in the F4 help. Is there some othere place where the message type has to be maintained.
Regards,
Deepti

hi
If you add required message type in BD60 you can see it. but the thing is BD10 is only for MATERIALS. So material related message types only you can see there. It you want to see customer related message type then you can go to BD12.
While creating message type in BD60, system should ask reference message type. You have to select one reference message type while selecting dropdown or pressing f4 for reference field in BD60. If you select MATMAS as reference message type there then you can see that message in BD10.
Reward if it is helpful.
Thanks
Siva Kumar

Eclipse - imported type not visible !?

I have an import at the beginning of my code but it is underlined and when you hover over it it says imported type ... is not visible. Why? I have added the jar and all other imports work fine. What could be wrong?

Another thing to look for is to make sure that the class you are looking for is in the Jar file, and not a different one. Like how the JavaMail api has multiple jar files.
Something you could try is to remove the import, but keep the part of the code where you use the classes from that import, and save the file. When you get an error, right click on the error and select "Quick Fix", and see if it offers the class as an option to add.

Currency Conversion type not visible in the query

Hi ,
I created one currency type conversion   Z_INR
exchange rate type : M
Exchange rate from infoobject : zexch_rate(key fig)
source curr from data record
Fixed target curr : INR
Variable time reference : A to Exact Day
Special info object : Ztr_date (Transaction date)
it got saved succesfully but wen i try to include this in the query its not visible there . can anyone let me know why this problem is coming
help will be appreciated .
i also included rate and date in the query still not visible

Hi,
Create Currency conversion type using Trans: RRC1.
1.Specify your Exchange rate type.
2.Dynamic Exchange rate type
3.Source curency from data rec.
4.Fixed currency say USD.
5.Select Variable Time reference "Start Month" and Special Info Object - 0calmonth
Secondly In the key figure field to be converted in the query,   select properties - select the currency conversion key name .
Thanks,
Nagesh
Sony Singapore

Captivate 6 - Trying to make all click boxes not visible in output

Adobe Captivate 6 - how do you make all the click boxes not visible in output. Help says to uncheck the Visible in Output box, easy enough, then it say to click the Apply to all icon and there is no such icon. Do I have to go through every single slide and manually do each one?

Hello and welcome to the forum,
I think you want to 'hide' the click box, so that it is not active, in the Properties panel? A click box itself is never visible to the user on the stage, but can be active or not.
I always copy/paste an invisible object, it will keep its properties. Since a click box has no style, you cannot apply a style to all click boxes.
Lilybiri

Transaction types(PO types) not visible on SRM 7.0 portal

Hi all,
We added transaction types in the SRM 7.0system.But these are not reflecting in the SRM 7.0 portal.
Under Purchasing role ->create Documents -> Purchase order .
Once I click on the purchase order it is giving a table with columns PO type and PO desc.
and showing a message the table does not contain any data.
But SRM consultant added the transaction types(PO types) in the backe nd.
Is there missing configuration steps?
Thanks and regards,
Rajesh

Hello Rajesh,
Few more pointers, if works:
1. Check the roles, sometimes security restricts role by document types.
2. Extended classic scenario is activated.
3. As a standard, there are 3 purchasing tabs in SRM 7.0 for buyer depending on portal roles, ECC, SRM & harmonized role (ECC & SRM), Check if you are trying to create PO in SRM/Harmonized role purchasing tab & not in ECC. Easiest way to check is you will have shopping cart POWL visible in SRM purchasing tab.
Hope this helps.
Thanks
Ashutosh

Ztransaction type not visible in webui as follow up under Zopportunity type

Hi Gurus,
I have made an exact copy(z005) of 0005 (outgoing email), have enabled the transaction for the Web Channel, have all the authorizations and still cannot see the Z copy on the webUI ib CRM test server,
and also assigned Categories (email) to Transaction Types(z005) in
spro>crm>transactions>settings for activities>maintain categories, goals & priorities>Assign Categories to Transaction Types
same way i have created an exact copy(zopt) of "oppt" have enabled web channel, and now when i open it and try to create follow-up transaction, here it is not showing (z005) i.e "z" outgoing email transaction as an option but showing other z activity transactions which i created automatically in CRM test system but it is working fine in CRM development system.
i am not able to figure out what is going wrong in CRM test system.
Please help it is critical.
thanks,
G.One
Edited by: wwgauravshah on Jan 28, 2012 8:14 AM

Hi,
in standard SAP offering , Business activity and task transaction type are given as follow up for opportunity transaction type , it becomes more evident in my case bcoz even in my CRM development server no copy control are maintained still it is visible in GUI and webui interface,
moreover i also checked authorisation( and profile sap all) for business transaction object "crm_order_op" it is " * " in my login role "sales representative".
even OP generic settings are same( total 572 ) in all CRM systems(i.e dev,test and prod),
and also as i said earlier that these transaction types (bus2000126-outgoing & incoming email activity) are visible in GUI (test & prod)but not in WebUI interface.
is there any note or something...or does it has to do anything to user assigned to a position in organisation model or any SICF object or any email setup (basis).
please help it is critical...
Thanks,
G.One

Condition type not visible in billing document

Hi
We are currently in the process of making some changes to the pricing procedures.
While processing an IC order, we find the following discrepancies,
In VA03, when we enter the order details, the price shows the expected value and so do the condition details.
However, in the billing document for the same, in VF03, we find that one of the condition types are missing, hence the value in the sales document and the billing document are different.
I have checked the details in the condition types, pricing procedures and the access sequences, everything appears to be configured correctly.
Please advice as to how this can be corrected.
Thanks
sap10

Hi
Check in pricing procedure (tcode V/08) if you have any Reqt.
Other possibility, but I think that it doesn't matter in your case. See SAP Note 105621 - Authorization check for the condition screen, that it is used to hide conditions, but not for delete them.
I hope this helps you
Regards
Eduardo

Pricing condition type not visible

All,
I have a condition type which is visible in SPRO> Sales and Dist> Basic Functions> Pricing Control> Maintain Condition types.
But when i go to VK11 to create record for this condition type, it doesn't exist there. Seems like its hidden or something.
What would make it not show up in VK11 ?
thanks

Hi,
Make sure it is not a header condition.
Also check if you have assigned an access sequence to it.
If you have created it from scratch, generate your condition table again.
Regards,
Amit

Note type not visible in Creation of Service Request

Hi there!
I am experiencing this OAF issue:
When creating a new Service Request there is a section "Problem Description" where we can see DFF, Summary and Notes.
The Notes region I can see is extended from another Region where there is the Notes Type and the actual Note to be entered (TextInput). But when creating a new Service Request I cannot see the Note Type messageChoice and don't know why. If I open the personalization page by clicking on "Personalise Page" link Ican see the Note Type item and it's visible according to the information but I still cannot see it. Is there any setup here that is used in the controller to hide the item? Is there something else happenning? Please, help.
//Patricia

Hi!
I discover that both Note Type and status are set to rendered=false in the controller. That's the answer. I have to check I customer needs to see those or if they can live with it as is. Question is why arethey invisible in Service Request entry?
//Patricia

Pricing Condition Type - Not visible to the customer

Dear All,
What all the config need to set up in the pricing procuder for a condition type to ensure customer did not wish to see the value for the particular condition type on the invoice. However it should have the ability to value in the condition type automatically post to the correct accounts at the time of invoicing.
Thanks in advance.
Victor

Hi victor
If nobody should change the condition type at billing level or sales order level also means then go to V/06 and set the field Manual Entries - D .
Secondly, in VTFL change the pricing type to C or D then changing the condition type manually is not possible
Regards
Srinath

All Process Types not visible in RSPC ( process chain)

Similar Messages

Maybe you are looking for