All quantity base on storage location.... 4 questions...

hi experts,
i want to write a report which can show all the quantitiy base on storage location and i have four questions ....
1 . has somebody can tell me where i can find the confirmed qty ? is it in VBEP-BMENG ?
2 . how to know one material in one storage location's available quantity and confirmed quantity and received quantity ?
3 . has somebody can tell me where i can find the soft commit & hard commit qty fields ?
4 . is the field in table MARD named UMLME[Stock in transfer (from one storage location to another)] for transfer in or out ?
Many thanks !
Carlos Zhang

everything you can do it thro' query.SVQ1.please search in this forum.you will get more detail on query.here you can link 2/3 tables and make your own report.
regards
venkadesh

Similar Messages

Need to create a report: all materials in one storage location incl. value

Hello,
we have the requirement to create a report: all materials in one storage location incl. value.
What are the database-tables we need to use in the report?
Is there a standard transaction which shows all materials on one storage location?
Thanks a lot.
Kind regards
Manfred

Hello,
MB52 is ok - but not good performance.
What are the important tables we need to join in an own report?
Kind regards
Manfred

Report including open purchase order quantity for one storage location

Hello gurus,
I am looking for a report giving me the total/available stock and the open purchase order quantity for all materials stored in a certain storage location.
I.e. like this:
Plant 0001, storage loc. 01
Material stock open purchase order quantity
100000 200 pcs. 50pcs.
Is there such a report in SAP standard?
Thanks
Alicia

hI
U want the report like this ,
MAterial stock availablein storage location and with Open PO quantity for the same material.???
This report u can get in 2 different transaction . the n u can combine and create one custom transaction .
One is for materil stock in storage location is MB52 or MB5B
THen ME2N for open PO quantity for that material.

Ordered quantity in 2 storage locations

Hi,
I have material M1 of 100 pieces stored in 2 storage locations say( SL1=50,SL2=50) in 1 plant.
Now i create an order fo 80 pieces. quantity is getting confirmed and order is saved.
Now VL01n- storage location is entered manually and so the pick quantity.
How do you process such order. what needs to be done in the delivery document.
partial delivery is allowed.

Hi Lakshmipati,
if the storage location is determined automatically in delivery document then though i have 70 pieces of stock in plant only 50 will be confirmed and it wont use the stock in second storage location. so for the order to be complete i have to maintain the stock in SL1.
SO I want to know how to process a sales order with 70 quantity and which is maintained in 2 storage locaion(sl1=50,sl2=20)
what i tried to do is in delivery document i changed the deliver qunatity to 50 and picked that stock from sl1 location and done pgi
and again with reference to same order i created a delivery again and now the delivey quantity is shown as 20 so picked that 20 from sl2 location
i want to know if this is a standard process .

Move all materials in a storage location to another storage location

Hi,
is there in SAP a trx which moves automatically materials from a storage location to another storage location ?
Regards

is there in SAP a trx which moves automatically materials from a storage location to another storage location ?
There is no t code for automatic goods movement.
Have to do manually with t code: MB1B or LSMW

Storage location quantity ABAP report question

hi experts,
i want to write a report which can show all the quantitiy base on storage location and i have four questions ....
1 . has somebody can tell me where i can find the confirmed qty ? is it in VBEP-BMENG ?
2 . how to know one material in one storage location's available quantity and confirmed quantity and received quantity ?
3 . has somebody can tell me where i can find the soft commit & hard commit qty fields ?
4 . is the field in table MARD named UMLME[Stock in transfer (from one storage location to another)] for transfer in or out ?
Many thanks !
Carlos Zhang

Solved !

Mandatory the Material Quantity and Storage Location Field in Order

Hi Expert,
Please advise. how can i set the Maintenance order,
If Material field is Filled
Then Mandatory the Quantity Field and Storage Location Field.
Thank You
Best Regards

Hello,
Please Use Below User Exits to get your Functionality
IWO10009 --->PM Order Check for 'Save' Event
CNEX0026--->general inspection of material
Regards,
Rakesh

Storage Location Mapping.

Hi SAP guru,
My client, in legacy system is maintaining the stores as WM modelu2026. (I.e. Racks and Bins), for identifying the items in the stores.
But WM is not in the scope of implementation.
He is having one big central stores and he wants to maintain as it is.
1.My suggestion is, items can be stores together for all plants (4plants)in central stores and each plant is logical storage location identified in the main stores.
For exampleu2026. Item A --- 100nos.
Plant u2013x u2026. SL-01 u2013 50nos.
Plant- y u2026 SL-05 u201320Nos.
Plant u2013Z u2026. SL-01 u2013 50nos.
Total 100Nos. stored together... GI will happened for plant and storage location.
2. But they want to approach to Bin level identification. And client is suggesting that create storage location as one bin.
If we create like thatu2026. Then no of storage location goes up to 5000+ per plant.
Is this advisable?
Please give me some ideas how to sort out this issue.
Thanks in advance.
Good suggestion will be awarded !!!!!!
Anand

Hi Anand,
Because of your business need, if you need a storage location, you can create and will not have any conflict with standard settings.
Just to give description of storage location, A storage location has the following attributes:
There may be one or more storage locations within a plant.
A storage location has a description and at least one address.
It is possible to store material data specific to a storage location.
Stocks are managed only on a quantity basis and not on a value basis at storage location level.
Physical inventories are carried out at storage location level.
A storage location can be assigned to a warehouse number in the Warehouse Management System. You can assign more than one storage location to the same warehouse number within a plant.
Storage locations are always created for a plant.
In your case, instead of creating 5000 bins as a storage locations, try to reduce the size to two digits(around 50 st.loc) based on physical dimensions and structure of the racks and bins. It requires lot of brain storming before sizing the bins to st locations.
Hope it helps you.
Thanks..

Storage Location level ATP check with CRM

Hi:
I am on an implemenation where the integration is between CRM, EWM and GATP. So, consider the situation where the sales order check is done through CRM and a call to GATP is made.
Some background on supply
EWM would like to receive the goods into storage location ROD (Received On Dock) and then do a movement type to move it to storage location AFS (Available For Sale). The sales orders should consider only the supply from storage location AFS and not ROD.
First question is, is it possible to do a storage location level determination in CRM? I don't think so but wanted to confirm. The reason is because even a plant determination is not possible in CRM when you integrate with GATP (the plant is determined through Rules).
Now, suppose that we have determined the storage location called AFS (in gATP through enhancement) and will do an ATP only at that level in GATP. Suppose that the first plant that will be checked is Plant A and then based on the location determination procedure, the next plant that will be checked is Plant B. When the system checks supply at Plant B, then the question is this: will it still check only at storage location AFS in Plant B or will it check at the plant level? The requirement will be to check at the same storage location level (which means that whatever process we used to determine the storage location at Plant A has to be followed for Plant B also).
One option that can be considered is to check at the Storage Location MRP Area level (there seems to be better support for RBA and Storage Location MRP Area than just storage location). See SAP Note 412314. But this is also complicated.
Another option is to not check at the storage location level but represent the various stocks with stock types (stock type ROD and stock type AFS) and only the stock type AFS will be used in the list of ATP categories.
Please share any experience that you may have in this.
Thanks,

Hi Satish,
In my project also we had this requirement to determine the correct Storage location after plant has been determined by using rules.
What we did is as follows:
- We created a Z table which had entries for all plants and preferred storage locations for those plant (only one entry per plant) in your case it will be like:
Plant A - AFC
Plant B - AFC
Plant C - AFC
- We used a ATP user exit in APO to get the storage location of source plant ( which was determined in APO via rules) from the Z table.
I hope this helps.
Please let me know if you have any questions.
Thanks,
Anupam
Edited by: Anupam Sengar on Dec 20, 2011 12:03 AM

Storage Location Level ATP check through CRM

Hi:
I am on an implemenation where the integration is between CRM, EWM and GATP. So, consider the situation where the sales order check is done through CRM and a call to GATP is made.
Some background on supply
EWM would like to receive the goods into storage location ROD (Received On Dock) and then do a movement type to move it to storage location AFS (Available For Sale). The sales orders should consider only the supply from storage location AFS and not ROD.
First question is, is it possible to do a storage location level determination in CRM? I don't think so but wanted to confirm. The reason is because even a plant determination is not possible in CRM when you integrate with GATP (the plant is determined through Rules).
Now, suppose that we have determined the storage location called AFS (in gATP through enhancement) and will do an ATP only at that level in GATP. Suppose that the first plant that will be checked is Plant A and then based on the location determination procedure, the next plant that will be checked is Plant B. When the system checks supply at Plant B, then the question is this: will it still check only at storage location AFS in Plant B or will it check at the plant level? The requirement will be to check at the same storage location level (which means that whatever process we used to determine the storage location at Plant A has to be followed for Plant B also).
One option that can be considered is to check at the Storage Location MRP Area level (there seems to be better support for RBA and Storage Location MRP Area than just storage location). See SAP Note 412314. But this is also complicated.
Another option is to not check at the storage location level but represent the various stocks with stock types (stock type ROD and stock type AFS) and only the stock type AFS will be used in the list of ATP categories.
Please share any experience that you may have in this.
Thanks,
Satish

Hi Satish,
In my project also we had this requirement to determine the correct Storage location after plant has been determined by using rules.
What we did is as follows:
- We created a Z table which had entries for all plants and preferred storage locations for those plant (only one entry per plant) in your case it will be like:
Plant A - AFC
Plant B - AFC
Plant C - AFC
- We used a ATP user exit in APO to get the storage location of source plant ( which was determined in APO via rules) from the Z table.
I hope this helps.
Please let me know if you have any questions.
Thanks,
Anupam
Edited by: Anupam Sengar on Dec 20, 2011 12:03 AM

MD04 - Display the stock on one storage location particulary.

The transaction MD04 allows seeing the stock of the plant in the first line of the Stock/requirement list.(MD04)
When the plant includes several storage location (e.g MAG1, MAG2, MAG3), we don't have the detail of the quantity one each storage location.
We can use the filter (by using SETTINGS and FILTER ON) that controls the display of the MRP list and the stock/requirements list but this function don't allows seeing only the stock on one storage location particulary. We have to go the tcode MMBE in order to know the stock on each storage location.
Thanks in advance for yours reply.

What is your real problem?
Display the stock storage location-wise is one thing and do MRP without certain storage location(s) (=exclude storage locations from MRP) might be another.
If you only want to display stock of certain storage locations in MD04 but use all you stock for planning, I think there's no reason for it.
If you really want to exclude certain storage locations, then you have to be aware that MRP won't consider that stock (for the plant segment). It will also have impact on ATP (atp won't use that stock too).
So, there's a big difference between exclude a storage location from MRP and to exclude its stock from display.
(You can exclude storage locations from MRP via material master --> MRP4 view --> you have to enter both plant/sloc as organisational level and you will see the suitable tab. It is also possible to control this indicator via config for to be created material masters - you can search and find threads)
You should describe your exact requirement and maybe forum mebers can give you advice.

Shipment costs and storage locations

Hello gurus,
I have got two questions concerning shipment costs:
1. In my POs I would like the system to automatically find a condition for shipment costs (e.g. 10$ per item or 100$ per PO), so that I do not have to enter them manually. Obviously the ammount should depend on the vendor, material etc. All I found up to now are condition types FRA1 and FRA2, but both of them are manual condition types. Isn't there any way of automatically determining shipment costs in POs?
2. One of our vendors does not charge any shipment costs, if the value of all items for one storage location exceeds 200$.
Example:
item   value    storage loc.
0010   10$      1000
0020 180$     1000
0030   20$      1000
0040   50$      1100
No shipment costs are charged for items 10-30, because the overall value of the three items is 210$, but for item 40 shipment costs are charged, because the item is for a different storage location.
Is there any way to generate this behavior in SAP?
Thanks in advance
Alicia

You can automatically enter the shipment cost based onthe vendor and material
1) you can enter them in the info record so it would be defualt in the PO. in this case you don't have to enter manually but this will be not check your PO item value
2) you can create the conditon in the m/06 as like freight conditon and create the access sequence based onthe combination you want e.g. vendor and material and enter this access sequence in conditon type oyu have created and maintian that in your pricing so sytem will automatically determine the moment you create PO for this vendor and mateirla combination
but as per your secind scenarion where you have to do the total and than determine that the shipment charge is applicable or not
this will required custom logic to populate the conditon based onthe calculation of the item level total.
use the user exit MM06E005

How to add new field storage location of MM in FMDERIVE

Dear All
I want to add new field storage location in FMDERIVE as need to consume budget on the basis of storage location
Thanks in advance

Hi SAPCOFI,
With Eli and Aleksey on this thread, you dont need to worry anymore
Just to add on to the inputs....
Ensure that the USERTEMP1 buffer is cleared before a value is entered. We faced this issue wherein the previous S.Loc value was left as it is in the USERTEMP1, resulting in an incorrect assignment.
I also suspect that you might need to run the process of identifying the enhancement point and populating the S.Loc value into the memory and then to USERTEMP1 for different transactions separately. Not sure if this is the standard process, but atleast we did it that way.
For eg, we faced issues during Goods Issue from MIGO, as also during 301, 309 and 311 movement types. So execute these transactions too once the development is done and if the USERTEMP1 field isnt getting populated..
FMDERIVE TRACE was the most important tool during our tryst with S.Loc mapping into USERTEMP1....Ensure that you set it everytime during testing for this S.Loc, post development
@Experts - Please correct me wherever I've gone wrong.
Regards,
Wy.

Split the Delivery based on Storage location

HI all,
How to Split the Delivery based on Storage location when creating delivery. is there any functional setting ?
Thanks
Krupali

Hi KR and Lakshmipathi,
I am having exactly the same requirement. My requirement is that i need to split one Sale Order line into multiple line items in delivery based on the stock in a particular storage location at the time of delivery creation.
Eg.
Line item 10 in Sale order for quantity 100.
Storage location stock in the priority
ST01 = 40
ST02 = 25
ST03 = 2000
I wish to have 3 line items in delivery like
Line item           Storage Location             Qty
10                     ST01                                40
20                     ST02                                25
30                     ST03                                35
I was able to do the same in the BADI LE_SHP_DELIVERY_PROC ~ SAVE_DOCUMENT_PREPARE
But i am facing problems regarding the inconsistency in delivery document such as Picking status update etc
Suggest if there is any better method to do.
Thanks in advance.

Storage locations assignment

Hi
Right now my client is having the below storage locations
1. Raw materilas
2 Semifinished
3 Finished materilas
4.Spare parts
Now they are going for warehouse management.
I need suggestion
1. If I assign all these storage locations to warehouse, what is the advantage and disadvantages?
2.If I assign only one storage location assign to warehpuse and transfer all these storage locations stocks to single storage location, what are the advantages and disadvantages.
Since after WM implementation we manage the stock at differnt storage types.
Please suggest me the best solution.

Hi Srinivas,
The both question are seems like one or the other way, see my answers
1) Manage Different Stocks using Storage types
Advantage
i.) SAP WM Provided excellent standard storage type functionality to keep various stocks (Raw materilas, Semifinished,Finished materilas and Spare parts). So that you can manage all stocks under one storage location in one warehouse.
Disadvantage
ii.) Based on the storage location if you are using any custom functionality (to store or remove), that will not work.
2) If you keep the stocks in four storage location, those are assigned to one WM, In this case if you want do Stock Transfer
Advantages
i.)The Four storage locations geographically different places and then if you want manage one WM, this will be ok.
ii.)If you want to manage the stocks strictly in the separate locations, due to products characteristics or HU Managed finished you have to maintain separate storage location (SAP will now allow HU Managed and Non HU managed in one Storage location)
Disadvantage
i.)Due to space constraint, If you want to move stocks for temporarily from one storage location to another storage location under one warehouse, you have to create transfer posting in IM and then you have to create Posting Change Notification, Transfer Order at WM level (four steps involved here i.e Transfer Posting at IM level , PCN Creation, TO Creation and TO Confirmation at WM level)
Feel free to ask me if you have any questions
Thanks,
Madhu

All quantity base on storage location.... 4 questions...

Similar Messages

Maybe you are looking for