ALL RADIO BUTTONS NOT SHOWING UP ON WEBSITES

WHEN I LOAD SOME WEB PAGES NOT ALL RADIO BUTTONS SHOW UP. HAVE TO SCROLL ALL OVER PAGE TO SEE IF ANYTHING SHOWS UP. IT HAPPENS ON A LOT OF SITES.

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Windows Accessibility settings.
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

Similar Messages

List all tabs button not showing

I had to do a reinstall of firefox last night. and i don't know if the button was showing before but it sure isn't right now. when i go into customize mode the "list all tabs" button shows but out of customize mode the button completely disappears.. how can i get the button to show?

I usually have a lot of tabs and tab groups open so I never noticed it was removed until now. I opened a new tab group to open some tabs from my notebook and I noticed this was missing. Even worse is the "Tabs From Other Computers" option is no longer on the drop down list. I found it under history, which is an odd place to put it. This creates extra steps for accessing tabs from other computers. Someone needs to remind the Firefox developers they're supposed to improve things with new releases.

Menu Buttons not showing on my website

FireFox 4 wont display the Menu Buttons on my website (they should be cotained in the frame on the left of the page)
FireFox 3.6,
Internet Exlorer 8 and 9
Safari 4 and 5
The above all display this site properly

There is an incompatibility between the new HTML5 parser in Firefox 4 and the code in your page.
To see the difference, you can toggle the HTML5 parser off or back on again like this:
(1) Type or paste '''about:config''' in the address bar and press Alt+Enter to open the preferences editor in a new tab. Click the button promising to be careful.
(2) In the filter box, type or paste '''html5''' and pause while the list is filtered
(3) Double-click '''html5.parser.enable''' to toggle it to false or back to true.
Then reload your page.
Off the top of my head, I don't know the solution to making your page compatible.
This forum focuses on end-user support. You can find more web development help on the [http://forums.mozillazine.org/viewforum.php?f=25 mozillaZine Web Development board]. Separate forum, separate registration. Please note the tips in the Sticky Post at the top of the forum before posting.
Or you may have other resources that you like.

Sharepoint Report Subscriptions not showing on sharepoint website, but are in the database

Hi All,
We have had an issue which sharepoint where our subscriptions for reports "disappear" from the website. This makes is a little hard to edit them if we need to adjust the subscription. The funny thing is the subscription is still working as it is
generating emails.
I was able to check SQL and look at the ReportingService Database and I can see all the subscriptions listed in SQL.
So the subscriptions are there. The question is, why are they not showing on the website.
Here is a query I used to show the subscriptions:
SELECT
      UserName
      , Name
      ,[Locale]
      ,a.[ModifiedDate]
      ,a.[Description]
      ,[LastStatus]
      ,[EventType]
      ,[LastRunTime]
      ,[Parameters]
      ,[DataSettings]
      ,[DeliveryExtension]
      ,[Version]
      ,[ReportZone]
FROM [ReportingService_SP].[dbo].[Subscriptions] as a
inner join ReportingService_SP.dbo.users as b on b.UserID = a.OwnerID
inner join ReportingService_SP.dbo.[Catalog] as c on c.ItemID = a.Report_OID
order by Name
Any ideas would be great

Also I found the ReportZone Column had 2 results 0 or 3
I noticed everything that had a 0 showed on the website where 3 did not.
I also saw something saying this might have to do with the AAM and having different addresses, but we only have one address

How to uncheck all radio buttons in WHEN-NEW-FORM-INSTANCE trigger

Hi,
I have one radio group(RDBTNGRP) having three radio buttons (RDBTN1,RDBTN2,RDBTN3) in a control block, i want to uncheck all these three buttons through code.
Any help please.
Regards,

Hello,
I don't think you can achieve using the code or property to unselect all radio buttons.
One possibility is there to create one extra radio button in that same group and set any value for that. Let say you have two radio buttons in the radio group and now you created one more radio button in the same group. And set the value like ABC. Now go to the property of new created radio button and set the X Position, Y Position, Width and Height to zero (0). And set the initial value for that radio group to ABC (new created radio button). So at runtime it will look like unselected all radio buttons. And while saving you can check if radio button selected on your criteria or not.
-Ammad

ValueChangeListener in Radio Button not acting after first time

Hi,
I am using ADF-BC-JSF in Jdev 10.1.3.3. I have a page on which there are 2 radio buttons which show blank at first. As soon as a user selects a radio button, the valueChangeListener calls up a method in the backing bean that opens a dialog for the user. User enters some text in to the dialog and clicks OK after which the window closes. If the user clicks Cancel on the dialog page, the window is still closed but radio button value is reset to blank through javascript. the problem is that it works only first time. second time it tries to autosubmit but only the constructor of the backing bean is called and not the actual function to open the window. Following is the code snippet that may be helpful.
Radio Buttons
<af:selectOneRadio value="#{bindings.SP11WarrantDetailsViewMetallurgistReviewStatus.inputValue}"
layout="horizontal"
id="metallurgistRadioBtn"
autoSubmit="true"
valueChangeListener="#{UploadDownloadBean.exampleOpenDialog}"
disabled="#{ !UserInfo.metallurgist || bindings.SP11WarrantDetailsViewMetallurgistReviewStatus !=''}">
<af:validator binding="#{bindings.SP11WarrantDetailsViewMetallurgistReviewStatus.validator}"/>
<af:selectItem label="Approved" value="Approved"/>
<af:selectItem label="Rejected" value="Rejected"/>
</af:selectOneRadio>
Function to Open the Window
public void exampleOpenDialog(ValueChangeEvent valueChangeEvent)
// Add event code here...
FacesContext context = FacesContext.getCurrentInstance();
// Create the dialog UIViewRoot
ViewHandler viewHandler = context.getApplication().getViewHandler();
UIViewRoot dialog = viewHandler.createView(context,"/sp11/warrant/MetallurgistNotes.jspx");
HashMap properties = new HashMap();
AdfFacesContext afContext = AdfFacesContext.getCurrentInstance();
afContext.launchDialog(dialog,
null, // not launched from any component
null, // no particular parameters
true, //show in dialog
properties);
Javscript for resetting the Radiob button
function closeWindowOnCancel()
if(parent.window.opener.document.getElementById("notesValueHolder").value == '' )
parent.window.opener.document.getElementsByName("metallurgistRadioBtn")[0].checked = false;
parent.window.opener.document.getElementsByName("metallurgistRadioBtn")[1].checked = false;
Please suggest what can be the possible cause.
Regards,
Neeraj

Hi,
I am using ADF-BC-JSF in Jdev 10.1.3.3. I have a page on which there are 2 radio buttons which show blank at first. As soon as a user selects a radio button, the valueChangeListener calls up a method in the backing bean that opens a dialog for the user. User enters some text in to the dialog and clicks OK after which the window closes. If the user clicks Cancel on the dialog page, the window is still closed but radio button value is reset to blank through javascript. the problem is that it works only first time. second time it tries to autosubmit but only the constructor of the backing bean is called and not the actual function to open the window. Following is the code snippet that may be helpful.
Radio Buttons
<af:selectOneRadio value="#{bindings.SP11WarrantDetailsViewMetallurgistReviewStatus.inputValue}"
layout="horizontal"
id="metallurgistRadioBtn"
autoSubmit="true"
valueChangeListener="#{UploadDownloadBean.exampleOpenDialog}"
disabled="#{ !UserInfo.metallurgist || bindings.SP11WarrantDetailsViewMetallurgistReviewStatus !=''}">
<af:validator binding="#{bindings.SP11WarrantDetailsViewMetallurgistReviewStatus.validator}"/>
<af:selectItem label="Approved" value="Approved"/>
<af:selectItem label="Rejected" value="Rejected"/>
</af:selectOneRadio>
Function to Open the Window
public void exampleOpenDialog(ValueChangeEvent valueChangeEvent)
// Add event code here...
FacesContext context = FacesContext.getCurrentInstance();
// Create the dialog UIViewRoot
ViewHandler viewHandler = context.getApplication().getViewHandler();
UIViewRoot dialog = viewHandler.createView(context,"/sp11/warrant/MetallurgistNotes.jspx");
HashMap properties = new HashMap();
AdfFacesContext afContext = AdfFacesContext.getCurrentInstance();
afContext.launchDialog(dialog,
null, // not launched from any component
null, // no particular parameters
true, //show in dialog
properties);
Javscript for resetting the Radiob button
function closeWindowOnCancel()
if(parent.window.opener.document.getElementById("notesValueHolder").value == '' )
parent.window.opener.document.getElementsByName("metallurgistRadioBtn")[0].checked = false;
parent.window.opener.document.getElementsByName("metallurgistRadioBtn")[1].checked = false;
Please suggest what can be the possible cause.
Regards,
Neeraj

Radio buttons not working after resetting

I have a form with two radio buttons for each question. Each question is in its own frame "Q1," "Q2," etc. I also have a btn_Reset created to reset the form, i.e. reset all radio buttons and return to "Q1" frame. All buttons work as they should, including resetting the radio buttons, however, once I reset the radio buttons and return to "Q1" to start over, the actions associated with each radio button upon clicking on them do not work. Here's my code:
//Frame "Begin"
gotoAndStop("Q1") //I also define my variables in frame "Begin"
//Frame "Q1"
rbtn_YESQ1.onPress = function():Void
     attachMovie("btnReset", "btn_Reset", 1, {_x:0, _y:0});
     btn_Reset.onRelease = function():Void
          xfa.host.resetData("radioGroupQ1"); //this resets my radio buttons in "Q1" frame
          gotoAndPlay("Begin");
//Once I return to "Begin" frame, my variables are reset to their initial value since that's where I originally defined them, and I go to "Q1" because that's what the code in frame "Begin" says. Here is where I click on rbtn_YESQ1 again and even though the button does fill in, it does not attach btn_Reset to the stage as defined by rbtn_YESQ1.onRelease function.
What am I doing wrong?

Here's the full code for the radio buttons:
////Code in frame "Q1"////
//rbtn_YESQ1 code
yesListener = new Object();
yesListener.click = function (evt)
    mc_EmptyReset.attachMovie("btnReset", "btn_Reset", 1);
    mc_EmptyReset.btn_Reset.onRelease = function():Void
        //Places "Reset Confirmation" window on top
        attachMovie("mcResetConfirmation", "mc_ResetConfirmation", getNextHighestDepth(), {_x:24.0, _y:56.0});
        resetConfirmationTween = new Tween(mc_ResetConfirmation, "_alpha", easeNone, 0, 100, .5, true);
        mc_ResetConfirmation.btn_No.onRelease = function():Void
            mc_ResetConfirmation.btn_No.enabled = false;
            mc_ResetConfirmation.btn_Yes.enabled = false;
            resetConfirmationTween.yoyo();
            resetConfirmationTween.onMotionFinished = function():Void
                removeMovieClip(mc_ResetConfirmation);
        mc_ResetConfirmation.btn_Yes.onRelease = function():Void
            mc_ResetConfirmation.btn_No.enabled = false;
            mc_ResetConfirmation.btn_Yes.enabled = false;
            resetConfirmationTween.yoyo();
            resetConfirmationTween.onMotionFinished = function():Void
                removeMovieClip(mc_ResetConfirmation);
                gotoAndPlay("Begin");
rbtn_YESQ1.addEventListener("click", yesListener);
//Same code as above btn_NOQ1
noListener = new Object();
noListener.click = function (evt)
     //same code as above...
rbtn_NOQ1.addEventListener("click", noListener);
////Code in frame "Begin"////
gotoAndStop("Q1");

"record enable" buttons not showing up in Garage Band 10.0.3 (I have selected "show record enable"- a space in the track header opens up, but the button is not present. Same with "input moniter".

"record enable" buttons not showing up in Garage Band 10.0.3 (I have selected "show record enable"- a space in the track header opens up, but the button is not present. Same with "input monitor".

Look at all the posts in the forum from users with similar problems, it happened with the last Logic update.

Why isn't the edit button not showing in my ESX24 sampler?

why isn't the edit button not showing in my ESX24 sampler?

Is that during installation when you see the two icons.. the one on the left looking like a Garageband guitar icon, the one on the right like the Logic Pro platimum record icon?
Yes.. that one.. with the choice to click on which option you want/are coming from...
p.s. I'll probably aquire a Mac Mini this fall then upgrade.... I mean repurchase!
I think I managed to grab one of the last of the 2011 refurb'ed MMS's.... at that super low price Apple were selling them for... before they bumped it up and now, they seem to have none left at all at any price
However, just in case, I have found this site really useful at keeping track of Apple's refurb stock... and pricing
http://www.refurb.me/us/

ITunes Radio is not showing up on my iPad

iTunes Radio is not showing up on my iPad now. It was there after my iOS 7 upgrade. Can't find it now. Please help. Thanks.

It was there after you updated to iOS 7? You do know that iTunes Radio is only available in the USA right now. If you are certain that you should have it or that you did have it before, close the music app and reboot the iPad and them look again.
Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app thumbnail to close it.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Primary Key radio button not working

Hello
I created a toplink probject on my MacOS X 10.4.6 machine using JDev 10.3.1.0.4 SU2.
It works well, but when I click the toplink map, then I click my definition under structure to the right.
I have a view with:
Associated table: <popup>
Primary keys:
<radio button list>
Sequencing:
The problem is located at the radio button list of the primary keys, if I click a radio button, the XML description file is updated, but I visualy see nothing, all radio buttons are always not selected.
As a workaround, I click the pk I want, and then I verify the XML file for correct selection.
Hope it will be fixed.
Regards
Kuon

Found a new workarround.
Changing look from MacOS X to Oracle.
But I hope it will get fixed, MacOS look is better with text anti-aliasing.

TS2972 why is the import button not showing at the button right hand corner of iTunes?

why is the import button not showing at the bottom right hand corner of my ITunes page. I am trying to transfer files from my home share library onto a new computers library.

See if it isn't hidden under the View menu. iTunes- Turning on iTunes menus in Windows 8 and 7.

My Library (History/Show All History) does not show ANY History - only Tags & "All Bookmarks". What settings do I need to adjust to have this show. Nothing in the Options/Privacy seems to be relevant

My Library (History/Show All History) does not show ANY History - only Tags & "All Bookmarks". What settings do I need to adjust to have this show. Nothing in the Options/Privacy seems to be relevant in English

Lightning is a problem for you because it hooks into Thunderbird at a low level and you need a version compiled for the platform Thunderbird is running on. So you can't do the preferred solution, which is to put your whole profile in a shared folder and have both instances of Thunderbird reference the same profile. (Ditto for Enigmail). Lightning may become an integral part of Thunderbird in an upcoming release, at which point this limitation due to Lightning should disappear.
And if you can't use a shared profile, you can't set your Lightning, or your Address Book, to share a common set of files. Put another way, the linkage from Thunderbird to its address book files and calendar data is hard-coded, and not exposed where we can adjust it. :-(
The halfway house is to place your mail stores in a shared place, and use the Local Directory setting in each account's settings to connect to it. They don't need to be in the profile; what's more important in your case is that they are in a folder accessible to both operating systems.
Look in your profile; everything under Mail and ImapMail needs to be moved out to a shared folder. Note the entries in Thunderbird under Local Directory before you do this, and reconstruct those pathnames in Thunderbird, but adjusted to suit their new locations.
(You can see here that you need to make many adjustments, one per account, in each instance of Thunderbird, so it's a high-maintenance solution and this is why we don't recommend it when the alternative, moving the whole profile, is possible.)
I share address books and calendars between Thunderbirds on various computers (and my phone and tablet) by syncing to something in the cloud; Google Contacts and Google Calendar are my choices, using gContactSync and CalDav.
Having made the break myself some years ago, I'd recommend you break away from Windows. ;-)

HT5848 My iTunes Radio is not showing the bottom of my Music App on my iPhone. How do I get it back?

My iTunes Radio is not showing the bottom of my Music App on my iPhone. How do I get it back?

usa only.
if your usa then check restrictions

Folio Overlay Buttons not showing up on Panels after DPS Tool update

Folio Overlay Buttons not showing up on Panels after DPS Tool update

You're going to have to do much better as far as describing the problem. A screenshot would be a good start.
Bob

ALL RADIO BUTTONS NOT SHOWING UP ON WEBSITES

Similar Messages

Maybe you are looking for