All records loaded to cube successfully but the request is in red status

All the records are loaded from r3 to target, but the status of the request is still in RED, what is the reason and how to resolve it?

Hi,
If you find the records are loaded to cube and request is still red, Follow any one of the following options.
1. Make the request to green manually
2. Check the extraction monitor settings in SPRO -
> SAP Customizing Implementation Guide ---> Business Intelligence --->
Automated Processes -
> Extraction Monitor Settings. Check how the settings are done if you are authorized.
3. Go to Manage of the target ---> Environment ---> Automatic Request processing ---> Check the option Set Quality Status to OK
Hope this helps,
Regards,
Rama Murthy.
Edited by: Rama Murthy Pvss on May 11, 2010 7:39 AM

Similar Messages

I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

My young kids have ipads and since I updated the software, but they have their own icloud account, predictive text within their messages shows all my contacts from my iphone but the contacts are not listed as their contacts, how do I stop this?

My young kids have ipads and since I updated the software, but they have their own icloud account, predictive text within their messages shows all my contacts from my iphone but the contacts are not listed as their contacts, how do I stop this?

I have deleted the iCloud account under my name on their iPads and replaced with their ones. Apple support said yesterday I needed to click the small 'I' by each name as it came up in the TO box and remove it. After doing rid for each contact under each letter of the alphabet it should remove them from latest contacts. Having done this, although I could not remove groups I had sent, I am not convinced they will not return once I have written a few texts, any ideas?

New loaded apps are working but the app button shows only grey - please help

New loaded apps are working but the app button shows only grey - please help...I have this problem since 3 days ago. I have synchronized and restart my iPad but the matter didn't changed

well in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone.

On the zynga game, mafia wars, every time i click on something within the game a get a popup that says "Requested URL not found: 400" all pages load fine it just gives the message every time i click something, how can i stop this?

on the zynga game, mafia wars, every time i click on something within the game a get a popup that says "Requested URL not found: 400" all pages load fine it just gives the message every time i click something, how can i stop this?

Sorry, the above thread should have been a "new" post, not a reply post.

Coded UI -Unit Test Adapter threw exception: Unable to load one or more of the requested types

I am working on silver light bases share point application using visual studio 2012 with C#
While debugging coded ui tests with ui maps i am getting this error.
I have taken the solution developed by team member containing test methods and trying to debug/run the test methods which contain ui maps I am getting
Unit Test Adapter threw exception: Unable to load one or more of the requested types.Retrieve the loader exceptions property for more information.
When i exclude the tests that depend on ui maps and debug/run remaining test methods I am not getting this error and able to run/debug test methods successfully
But when I include the test methods related to ui maps and tried to debug i am getting this error.
Please help me in this.

Thanks for Fouad's help.
Hi usha.talasila,
>>Unit Test Adapter threw exception: Unable to load one or more of the requested types.Retrieve the loader exceptions property for more information.
Generally this error would be related to the references. Like Fouad's suggestion, you would check whether there are specific references in your test project, and then right click the reference->property, and then set the Copy Local =true.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Office App Devlopment: Unable to load one or more of the requested types.

I'm receiving the following error with the default C# Office App for Word, Excel, Powerpoint, Project Task Pane
Error Code
Description
File
Line
Col
Project
1
Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\SharePointTools\Microsoft.VisualStudio.SharePoint.targets
438
5
AppName
I'm using
Microsoft Visual Studio Community 2013
Version 12.0.31101.00 Update 4
Microsoft .NET Framework
Version 4.5.51641
Installed Version: Professional
LightSwitch for Visual Studio 2013   06177-004-0444002-02129
Microsoft LightSwitch for Visual Studio 2013
Team Explorer for Visual Studio 2013   06177-004-0444002-02129
Microsoft Team Explorer for Visual Studio 2013
Visual Basic 2013   06177-004-0444002-02129
Microsoft Visual Basic 2013
Visual C# 2013   06177-004-0444002-02129
Microsoft Visual C# 2013
Visual C++ 2013   06177-004-0444002-02129
Microsoft Visual C++ 2013
Visual F# 2013   06177-004-0444002-02129
Microsoft Visual F# 2013
Visual Studio 2013 Code Analysis Spell Checker   06177-004-0444002-02129
Microsoft® Visual Studio® 2013 Code Analysis Spell Checker
Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V. All rights reserved.
Windows Phone SDK 8.0 - ENU   06177-004-0444002-02129
Windows Phone SDK 8.0 - ENU
Application Insights Tools for Visual Studio Package   1.0
Application Insights Tools for Visual Studio
ASP.NET and Web Tools   12.4.51016.0
Microsoft Web Developer Tools contains the following components:
Support for creating and opening ASP.NET web projects
Browser Link: A communication channel between Visual Studio and browsers
Editor extensions for HTML, CSS, and JavaScript
Page Inspector: Inspection tool for ASP.NET web projects
Scaffolding: A framework for building and running code generators
Server Explorer extensions for Microsoft Azure Websites
Web publishing: Extensions for publishing ASP.NET web projects to hosting providers, on-premises servers, or Microsoft Azure
ASP.NET Web Frameworks and Tools 2012.2   4.1.21001.0
For additional information, visit http://go.microsoft.com/fwlink/?LinkID=309563
ASP.NET Web Frameworks and Tools 2013   5.2.21010.0
For additional information, visit http://www.asp.net/
Common Azure Tools   1.3
Provides common services for use by Azure Mobile Services and Microsoft Azure Tools.
Microsoft Azure Mobile Services Tools   1.3
Microsoft Azure Mobile Services Tools
NuGet Package Manager   2.8.50926.663
NuGet Package Manager in Visual Studio. For more information about NuGet, visit http://docs.nuget.org/.
Office Developer Tools for Visual Studio 2013 ENU   12.0.31105
Microsoft Office Developer Tools for Visual Studio 2013 ENU
PowerShell Tools   1.3
Provides file classification services using PowerShell
PreEmptive Analytics Visualizer   1.2
Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
SQL Server Data Tools   12.0.41012.0
Microsoft SQL Server Data Tools
Windows Phone 8.1 SDK Integration   1.0
This package integrates the tools for the Windows Phone 8.1 SDK into the menus and controls of Visual Studio.
From looking at the build it looks like the web part is building correctly but the application isn't passing validation, I have no idea why since it is the default app, I've made Office Apps on previous machines without a problem.
Any help would be much appreciated and also let me know if I can give more info!

Hi mngfinney,
>> From looking at the build it looks like the web part is building correctly but the application isn't passing validation, I have no idea why since it is the default app, I've made Office Apps on previous machines without a problem.
I’m trying to reproduce your issue but failed.
Here is my steps:
#1 Install Microsoft Visual Studio Community 2013
#2 Install Microsoft Office Developer Tools for Visual Studio 2013
#3 Create a new Apps for Office project and rebuild
According your error message, the failed step is ValidatePackage, I suspect it is an environment issue, but I cannot identify the root cause basing on the information you post.
Have you tried to re-install the Visual Studio and Microsoft Office Developer Tools for Visual Studio 2013 or test it on another machine with Microsoft Visual Studio Community 2013?
Regards,
Jeffrey
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SGEN: error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.

Hi,
I appollogize if this post is off topic. I have problem wiht publish WebApp MVC.
I have website (MVC) with one Web reference. Build and run in VS working. But when I tried to publish to disk I get error:
SGEN: error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
I have VS2013 Profesional with all updates and Windows 8.1.
If I remove web reference then publishing working. Where can be a problem? Thanks.

@Marek Bober,
Thanks for sharing the solution back to here.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Record center - submit file soap call throwing The request failed with http status 401: Unauthorized" exception

Hi, I am trying to implement custom hold order / send to in sharepoint 2010 to send files in to holds / record center.
I am at the last step where I am trying submit the metadata using soap call- submit file
[SoapDocumentMethod("http://schemas.microsoft.com/sharepoint/soap/recordsrepository/SubmitFile", RequestNamespace = "http://schemas.microsoft.com/sharepoint/soap/recordsrepository/", ResponseNamespace = "http://schemas.microsoft.com/sharepoint/soap/recordsrepository/", Use = SoapBindingUse.Literal, ParameterStyle = SoapParameterStyle.Wrapped)]
public string SubmitFile([XmlElement(DataType = "base64Binary")] byte[] fileToSubmit, [XmlArrayItem(IsNullable = false)] Microsoft.SharePoint.RecordsRepositoryProperty[] properties, string recordRouting, string sourceUrl, string userName)
return (string)base.Invoke("SubmitFile", new object[] { fileToSubmit, properties, recordRouting, sourceUrl, userName })[0];
I am getting an error "The request failed with http status 401: Unauthorized".
Actual file was transferred successfully but while transferring the properties (metadata) I am getting this exception.
ganesh

Hi ganesh,
Please try to disable the loop back check, compare the result:
In Registry Editor, locate and then click the following registry key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
Right-click Lsa, point to New, and then click DWORD Value.
Type DisableLoopbackCheck, and then press ENTER.
Right-click DisableLoopbackCheck, and then click Modify.
In the Value data box, type 1, and then click OK.
Quit Registry Editor, and then restart your computer.
In addition, please check if these links are useful:
http://www.sharepointpills.com/2011/10/send-sharepoint-2010-document-to.html
http://www.codeproject.com/Articles/497729/UploadingplusDocumentsplusProgramaticallyplustoplu
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.

Hi there,
I use visual studio community 2013 to develop app for office. When I create app project using template and directly run it, it shows me this error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
Can anyone help? Thanks in advance.

Hi holm0104,
Did you add custom code into the project? Can you reproduce the issue in a new project without custom code?
If not, did you have issue when you create a normal web application?
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

"Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information" while attempting to open UNIX/Linux monitor

We have upgraded our System Center to 2012 R2, and we cannot open any of the UNIX/Linux LogFile monitor property or the UNIX/Linux process monitor property for those monitors created prior to the upgrade. Error we get is below. Any assitance
appreciated.
Date: 9/30/2014 10:01:46 PM
Application: Operations Manager
Application Version: 7.1.10226.0
Severity: Error
Message:
System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
   at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean forIntrospection)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
   at System.Reflection.Assembly.Load(String assemblyString)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.TypeContainer.get_ContainedType()
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.AddTemplatePages(LaunchTemplateUIData launchData, Form form)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.Initialize(Object launchData, Form form)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.RunPrivate(Object[] userData)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.Run(Object[] userData)

It's possible the upgrade did not update everything properly as it looks like a dll mismatch or a missing file. I'd open a support ticket with MS and have a support engineer look at the upgrade logs. What version of SCOM did you upgrade from?
Regards,
-Steve

All website went "HTTP Error 404. The requested resource is not found."

''dupe of https://support.mozilla.org/en-US/questions/928117''
all website went "HTTP Error 404. The requested resource is not found."
this only happen in firefox (i'm using IE to post this question)

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*http://kb.mozillazine.org/Error_loading_websites
You can try to reset (power off/on) the router.

The agent service is running, but the request failed for ...

Hi!
ZCM 10.3.3 on SLES 11. HP notebook, Windows 7 Pro SP1.
When WiFi is also switched on I got yellow diamond in ZCC and error "The agent service is running, but the request failed for one or more known addresses.". What this does mean? WiFi off -- green again! =)
More thanks, Alar.

Does the address it's getting via Wireless have a path back to the ZCM server? That was my point. If your wireless is vlan'd away from the wired network, ZCM won't be able to contact it through THAT particular address and will show the yellow diamond as a result even though it communicates fine through the wired address.

SMS_WSUS_CONFIGURATION_MANAGER - MessageID 6600 - The request failed with HTTP status 503: Service Unavailable

Hi all,
knowning that there are already a lot of posts concerning above message, I have to write an additional one as I could not find a solution on the web yet.
Situation:
Windows Server 2008 forest including empty root and two child domains, one child domain does have SCCM SP1 (central primary site WND) installed on W2k8 x64 machine including WSUS 3.0 SP1 => everything is working fine.
Second child domain also contains a SCCM SP1 server (primary site HUN) running on W2k8 x64 and is defined as child site of central site WND => everything is working fine too - except Software Updates.
WSUS 3.0 SP1 installed on both SCCM servers by creating additional web site (not using "defautl web site") and configured ports 8530 and 8531 (SSL not used!). No proxy necessary/used. All WSUS 3.0 requirements for W2k8 are installed (IIS roles)
Error:
SMS_WSUS_CONFIGURATION_MANAGER - MessageID 6600:
SMS WSUS Configuration Manager failed to configure upstream server settings on WSUS Server "xxxx0003".
Possible cause: WSUS Server version 3.0 SP1 and above is not installed or cannot be contacted.
Solution: Verify that the WSUS Server version 3.0 SP1 or greater is installed. Verify that the IIS ports configured in SMS are same as those configured on the WSUS IIS website.
wsusutil checkhealth =>OK
downloading updates from WSUS at central site (SUSDB and WSUS folder equal in size) =>OK
wsus admin console able to connect and configuration possible => OK
IIS ports configured within SMS are equal to those configured for WSUS website
SCCM config (using Configuration Manager Console) does look correct - ConfigMgr Software Update Point role properties and Software Update Point Component properties
wcm.log does report an error: (SCCM Log files at the end.)
"The request failed with HTTP status 503: Service Unavailable"
IIS log files of both websites (default web site and WSUS Administration website) do not show any errors.
Questions:
What else should I look at? (registyr, SUSDB content,..)
What exactly does happen during the attempt to configure the upstream server by the SMS_WSUS_Configuration_Manager component? I guess a SMS process tries to contact a webservice - would it be possible to debug in more detail ?
And finally - Who does know the solution ?
wcm.log:
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
System.Net.WebException: The request failed with HTTP status 503: Service Unavailable.~~ at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)~~ at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer(String serverName, Boolean useSecureConnection, Int32 portNumber)~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String ServerName, Boolean UseSSL, Int32 PortNumber) SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
Remote configuration failed on WSUS Server. SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4468 GMTDATE=Mi Jul 16 10:49:47.758 2008 ISTR0="xxxx0003" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
Waiting for changes for 59 minutes SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
wsusctrl.log (looks fine to me - is able to connect to local WSUS !):
SMS_EXECUTIVE started SMS_WSUS_CONTROL_MANAGER as thread ID 6156 (0x180C). SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 2732 (0x0AAC)
This is a WSUS Role as WSUS registry key exists. SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Local WSUS Server Proxy settings are correctly configured as Proxy Name and Proxy Port 80 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Waiting for changes for 0 minutes SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Timed Out... SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Local WSUS Server Proxy settings are correctly configured as Proxy Name and Proxy Port 80 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
There are no unhealthy WSUS Server components on WSUS Server xxxx0003 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully checked database connection on WSUS server xxxx0003 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:02 6156 (0x180C)
Waiting for changes for 57 minutes SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:02 6156 (0x180C)
wsyncmgr.log (as a result of being not able to configure upstream server I guess):
STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4476 GMTDATE=Mi Jul 16 10:03:51.481 2008 ISTR0="" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 16.07.2008 12:03:51 4476 (0x117C)
Sync failed: WSUS server not configured. Source: CWSyncMgr:oSync SMS_WSUS_SYNC_MANAGER 16.07.2008 12:08:51 4476 (0x117C)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4476 GMTDATE=Mi Jul 16 10:08:51.636 2008 ISTR0="CWSyncMgr:oSync" ISTR1="WSUS server not configured" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 16.07.2008 12:08:51 4476 (0x117C)

I just experienced the exact same scenario. After much digging I found that csakg6so posted a fix at
Windoows-Noob
Run Internet Explorer as the SYSTEM account (psexec -s -d -i cmd.exe & C:\Program Files\Internet Explorrer\iexplore.exe)
Go to internet options
Go to conections
Go to LAN settings
Uncheck all boxes
The original post said to reboot, but that wasn't necessary for me.
After initiating a manual Software Update sync the WCM.log and WSyncMgr.log errors do not return and new updates are synchronized.

"The request failed with HTTP status 401: Unauthorized"

Hi,
I'm trying to get both RSS feeds and SSRS reports on a web application which is having NTLM authentication without Kerberos. The catch is proxy setting, if I give <proxy autoDetect="false" /> in web.config of my sharepoint web
application SSRS reports will be rendered in SQL Server Report viewer perfectly (I deploy using BIDS), but RSS viewer webpart will not display my internet feeds. If I give
<proxy autoDetect="true" /> RSS feeds are displayed properly but SSRS report will throw the following error.
The request failed with HTTP status 401: Unauthorized.
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[WebException: The request failed with HTTP status 401: Unauthorized.]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +412862
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +300
Microsoft.SqlServer.ReportingServices2005.Execution.ReportExecutionService.ListRenderingExtensions() +53
Microsoft.SqlServer.ReportingServices2005.Execution.RSExecutionConnection.ListRenderingExtensions() +207
Microsoft.Reporting.WebForms.ServerReport.ListRenderingExtensions() +130
Microsoft.ReportingServices.SharePoint.UI.WebParts.ActionMenu.OnPreRender(EventArgs e) +180
System.Web.UI.Control.PreRenderRecursiveInternal() +108
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Control.PreRenderRecursiveInternal() +224
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3394
I tried to work around this by adding proxy settings with bypass list.
<system.net>
    <defaultProxy useDefaultCredentials="true">
      <proxy proxyaddress="http://<proxy IP address>:<port>" bypassonlocal="true" usesystemdefault="true" />
      <bypasslist>
  <add address="<my report server>" />
  <add address="http://<report server>:8080/reportserver/" />
  <add address="<IP of my report server>" />
      </bypasslist>
    </defaultProxy>
</system.net>
This makes RSS feed to work but SSRS throw the above error. I would need some advice from Microsoft on how to fix this.
Note: My sharepoint site cannot be anonymous. I have just once service account that runs sql server service, report service, sharepoint services etc. This account is local admin on all servers, has highest access on sql box, run SSRS web service and app
pools, etc.
I have four servers, 2 WFE in windows load balanced, 1 app server (running Central admin and report service in sharepoint integrated mode), 1 db server hosting all content and config dbs and report server db.
Regards,
Manoj
Version Information: Microsoft .NET Framework Version:2.0.50727.3615; ASP.NET Version:2.0.50727.3618

Hi,
Thanks to share your post.
For the issue,
do you mean that the error happen with the use of NTLM authentication without Kerberos? If yes, the possible cause should be the lacking of Kerberos.
My suggestion is to implement the Kerberos authentication in your environment. You may check it and test it. For the detailed steps of implementing of the Kerberos:
http://blogs.msdn.com/b/martinkearn/archive/2007/04/23/configuring-kerberos-for-sharepoint-2007-part-1-base-configuration-for-sharepoint.aspx.
http://blogs.msdn.com/b/james_world/archive/2007/08/20/essential-guide-to-kerberos-in-sharepoint.aspx.
Hope this could help you!
Leo

All records loaded to cube successfully but the request is in red status

Similar Messages

Maybe you are looking for