All recurring meetings erased when synchronized Phone to Outlook/Exchange

I have been synchronizing my calendar and contacts with outlook for a few weeks and everything was always fine. Today, I upgraded to the latest version of iTunes and after the next sync all my recurring appointments were erased on both iPhone and Exchange. This is very disturbing. Did anyone else experience this? Any advice?

The IT team at my company hasn't been able to help me and I heavily rely on my appointments. What's more, recreating them from scratch does me no good since I'm the Organizer for over half of the recurring ones that got deleted (so any updates I were to do in the future wouldn't send out to everyone else, unless I had invited them to the newly created invite, which would be a duplicate for them and really would not work when you're working with many different teams, vendors, etc.)
I finally got a few of my team leads to FORWARD me back my original meeting series so I could save them back into my calendar. As it turns out, once it's sent back, Outlook sees them as a single instance (on the day I created it) vs. the recurring appt. So, then I had to re-save all the recurring timeframes for each one to get it back into its original state in my calendar.
Once I did that, I went back into iTunes to test it out. This time I changed the field to ONE for "Do not sync events older than 1 days". That seems to have done the trick. My iPhone now has all my recurring appts again, and my calendar does too. Neither have been deleted on either end. I played around with adding some future recurring appts to see if it would wreak havoc but iTunes imported them into the iPhone just fine and vice versa.

Similar Messages

  • Why did all my data erase when i downloaded iOs6?

    All my data was erase when i downloaded the ios6. All my apps, notes, email e.t.c. and no where did it say it was going to do that. On the last software update it didn't but, on this one it did.
    Is that supposed to happen? is here a way to get everything back?

    It seems to be a common problem.
    https://discussions.apple.com/thread/4629816?tstart=0

  • All songs are erased when connecting Ipod Nano to PC.

    It happened a few times now since the last few months, so last momnth I uppdated all softwares and installed the latest Itune. But it happened again last night. All songs got erased as soon as I plugged in my Ipod Nano to update or add new songs. Anyone experience that, what can it be.
    PC windows HP.

    Ok not sure what you mean, I did have to restore it It's my daughter's ipod)at work on my computer, added a few songs to see if it works, so it worked, gave it to her and she strted using it at home on the home computer and synched her ipod with Itunes to download her songs, was good for a few weeks and then last week she connected the usb cable to put more songs, that's when she lost everything and Itunes said to use the Ipod updater.... again!!!
    So do you mean that I she has to be on manual mode at home, since I initally put some music on my work computer???

  • All typed data erased when ...

    I am using Form 9i.
    I have master-details form. In detail form, key field is labour_code. When labour_code is selected, it displays the details in that row. If I selected some labour say 3, and on selected 4th labour if it is not available for this new job then my all data is erased. I have to select all data again.
    I am using two triggers on labour_code. When KEY-NEXT-ITEM trigger is made comment, then data is not erased. But then I didn't accomplish full task. What can be done to avoid this.
    Thanks and regards,
    Vikas
    1) WHEN-VALIDATE-ITEM
    DECLARE
    v_count                         NUMBER;
    v_status                    CHAR(1);
    v_workorder_no     VARCHAR2(15);
    v_pass_no                    VARCHAR2(15);
    v_to_dt                         DATE;
    BEGIN
         IF :workorder_dtls.labour_code IS NOT NULL THEN
              SELECT COUNT(*) INTO v_count FROM labour_master
                                  WHERE labour_code = :workorder_dtls.labour_code;
              IF v_count > 0 THEN --if labour exist.
                   SELECT status INTO v_status FROM labour_master
                                  WHERE labour_code = :workorder_dtls.labour_code;
                   IF v_status = 'I' THEN --'I' stands for busy.
                        --check if labour is for extension i.e. if labour is working for same workorder
                        SELECT COUNT(*) INTO v_count FROM workorder_dtls
                                            WHERE labour_code = :workorder_dtls.labour_code
                                            AND workorder_no = :workorder_dtls.workorder_no;
                        IF v_count > 0 THEN
                             SELECT to_dt, pass_no INTO v_to_dt, v_pass_no FROM workorder_dtls
                                                 WHERE labour_code = :workorder_dtls.labour_code
                                                 AND workorder_no = :workorder_dtls.workorder_no;
                             IF v_to_dt - SYSDATE < 3 THEN
                                  --if working in same workorder then for extension, then give from_dt, to_dt
                                  SELECT MAX(TO_DT)+1 INTO :workorder_dtls.from_dt FROM workorder_dtls
                                                      WHERE labour_code = :workorder_dtls.labour_code
                                                      AND workorder_no = :workorder_dtls.workorder_no
                                                      AND to_dt - SYSDATE < 3;
                             ELSE
                                  --if working in same workorder but not for extension then give message.
                                  MESSAGE('This labour is already working in this workorder using pass .'||v_pass_no||' which will expire on '||v_to_dt||'.');
                                  RAISE FORM_TRIGGER_FAILURE;
                             END IF;
                        ELSE
                             SELECT workorder_no, pass_no, to_dt INTO v_workorder_no, v_pass_no, v_to_dt FROM workorder_dtls
                                                 WHERE labour_code = :workorder_dtls.labour_code
                                                 AND workorder_no <> :workorder_dtls.workorder_no;
                             MESSAGE('This labour is already working through workorder no. '||v_workorder_no||' using pass '||v_pass_no||' which will expire on '||v_to_dt||'.');
                             RAISE FORM_TRIGGER_FAILURE;
                        END IF;
                   ELSIF v_status = 'A' THEN--'A' stands for available.
                        IF :workorder_master.from_dt > SYSDATE THEN
                             :workorder_dtls.from_dt := :workorder_master.from_dt;
                             :workorder_dtls.issue_dt := :workorder_master.from_dt;
                        ELSE
                             :workorder_dtls.from_dt := SYSDATE;
                             :workorder_dtls.issue_dt := SYSDATE;
                        END IF;
                   ELSIF v_status = 'H' THEN--'H' stands for help-up.
                        SELECT workorder_no, pass_no INTO v_workorder_no, v_pass_no FROM workorder_dtls
                                                 WHERE labour_code = :workorder_dtls.labour_code
                                                 AND cancil_dt IS NOT NULL;
                        MESSAGE('This labour has been held-up for not submitting gatepass.');
                        RAISE FORM_TRIGGER_FAILURE;
                   ELSIF v_status = 'S' THEN--'S' stands for suspend.
                             SELECT workorder_no, pass_no INTO v_workorder_no, v_pass_no FROM workorder_dtls
                                                 WHERE labour_code = :workorder_dtls.labour_code;
                        MESSAGE('This labour has been suspended through workorder no. '||v_workorder_no||' using pass '||v_pass_no);
                        RAISE FORM_TRIGGER_FAILURE;
                   END IF;
                   IF v_status IN ('A', 'I') THEN
                        IF :workorder_dtls.from_dt + 90 <= :workorder_master.to_dt THEN
                             :workorder_dtls.to_dt := :workorder_dtls.from_dt + 90;
                        ELSE
                             :workorder_dtls.to_dt := :workorder_master.to_dt;
                        END IF;
                   END IF;
              ELSE --if labour does not exist.
                   MESSAGE('Invalid labour code');
                   RAISE FORM_TRIGGER_FAILURE;
              END IF;
         END IF;
    END;
    2) KEY-NEXT-ITEM
                   :BLK_TEMP_WORKORDER.LABOUR_CODE := :WORKORDER_DTLS.LABOUR_CODE;     
                   GO_BLOCK('WORKORDER_DTLS_IMG');
                   EXECUTE_QUERY(NO_VALIDATE);      
                   GO_ITEM('WORKORDER_DTLS.from_dt');

    OK Sir, I am giving you indented code. This code is written in WHEN-VALIDATE-ITEM of labour_code.
    [HTML]
    DECLARE
    v_count                         NUMBER;
    v_status                    CHAR(1);
    v_workorder_no     VARCHAR2(15);
    v_pass_no                    VARCHAR2(15);
    v_to_dt                         DATE;
    BEGIN
         IF :workorder_dtls.labour_code IS NOT NULL THEN
              SELECT COUNT(*) INTO v_count FROM labour_master
                                  WHERE labour_code = :workorder_dtls.labour_code;
              IF v_count > 0 THEN --if labour exist.
                   SELECT status INTO v_status FROM labour_master
                                  WHERE labour_code = :workorder_dtls.labour_code;
                   IF v_status = 'I' THEN --'I' stands for busy.
                        --check if labour is for extension i.e. if labour is working for same workorder
                        SELECT COUNT(*) INTO v_count FROM workorder_dtls
                                            WHERE labour_code = :workorder_dtls.labour_code
                                            AND workorder_no = :workorder_dtls.workorder_no;
                        IF v_count > 0 THEN
                             SELECT to_dt, pass_no INTO v_to_dt, v_pass_no FROM workorder_dtls
                                                 WHERE labour_code = :workorder_dtls.labour_code
                                                 AND workorder_no = :workorder_dtls.workorder_no;
                             IF v_to_dt - SYSDATE < 3 THEN
                                  --if working in same workorder then for extension, then give from_dt, to_dt
                                  SELECT MAX(TO_DT)+1 INTO :workorder_dtls.from_dt FROM workorder_dtls
                                                      WHERE labour_code = :workorder_dtls.labour_code
                                                      AND workorder_no = :workorder_dtls.workorder_no
                                                      AND to_dt - SYSDATE < 3;
                             ELSE
                                  --if working in same workorder but not for extension then give message.
                                  MESSAGE('This labour is already working in this workorder using pass .'||v_pass_no||' which will expire on '||v_to_dt||'.');
                                  RAISE FORM_TRIGGER_FAILURE;
                             END IF;
                        ELSE
                             SELECT workorder_no, pass_no, to_dt INTO v_workorder_no, v_pass_no, v_to_dt FROM workorder_dtls
                                                 WHERE labour_code = :workorder_dtls.labour_code
                                                 AND workorder_no <> :workorder_dtls.workorder_no;
                             MESSAGE('This labour is already working through workorder no. '||v_workorder_no||' using pass '||v_pass_no||' which will expire on '||v_to_dt||'.');
                             RAISE FORM_TRIGGER_FAILURE;
                        END IF;
                   ELSIF v_status = 'A' THEN--'A' stands for available.
                        IF :workorder_master.from_dt > SYSDATE THEN
                             :workorder_dtls.from_dt := :workorder_master.from_dt;
                             :workorder_dtls.issue_dt := :workorder_master.from_dt;
                        ELSE
                             :workorder_dtls.from_dt := SYSDATE;
                             :workorder_dtls.issue_dt := SYSDATE;
                        END IF;
                   ELSIF v_status = 'H' THEN--'H' stands for help-up.
                        SELECT workorder_no, pass_no INTO v_workorder_no, v_pass_no FROM workorder_dtls
                                                 WHERE labour_code = :workorder_dtls.labour_code
                                                 AND cancil_dt IS NOT NULL;
                        MESSAGE('This labour has been held-up for not submitting gatepass.');
                        RAISE FORM_TRIGGER_FAILURE;
                   ELSIF v_status = 'S' THEN--'S' stands for suspend.
                             SELECT workorder_no, pass_no INTO v_workorder_no, v_pass_no FROM workorder_dtls
                                                 WHERE labour_code = :workorder_dtls.labour_code;
                        MESSAGE('This labour has been suspended through workorder no. '||v_workorder_no||' using pass '||v_pass_no);
                        RAISE FORM_TRIGGER_FAILURE;
                   END IF;
                   IF v_status IN ('A', 'I') THEN
                        IF :workorder_dtls.from_dt + 90 <= :workorder_master.to_dt THEN
                             :workorder_dtls.to_dt := :workorder_dtls.from_dt + 90;
                        ELSE
                             :workorder_dtls.to_dt := :workorder_master.to_dt;
                        END IF;
                   END IF;
              ELSE --if labour does not exist.
                   MESSAGE('Invalid labour code');
                   RAISE FORM_TRIGGER_FAILURE;
              END IF;
         END IF;
    END;[HTML]
    Another code is written in KEY-NEXT-ITEM of labour_code. This trigger is only used to display image of labour which exist in seperate block. And I think there is no other way to display image of labour. Is it correct sir?
    [HTML]
              :BLK_TEMP_WORKORDER.LABOUR_CODE := :WORKORDER_DTLS.LABOUR_CODE;     
                   GO_BLOCK('WORKORDER_DTLS_IMG');
                   EXECUTE_QUERY(NO_VALIDATE);      
                   GO_ITEM('WORKORDER_DTLS.from_dt');[HTML]
    Thanks and regards,
    Vikas

  • Downloaded cd book to old macbook iTunes. can sync to iphone when connect to old macbook but erased when sync phone with new macbook air. how do i get the cd book onto the macbook air?

    ran out of room...how do i get the cd book onto my new macbook air? downloaded to old macbook from cd. goes on list when sync iphone with old mac. gets erased when sync with new macbook air
    thanks

    Copy it from the old computer to the new one.

  • When I login to Outlook Exchange for office email not all emails display. I use Safari on a home Mac. My PC at work shows all emails in the inbox

    This problem started a couple of months ago. I only receive about 25% of my inbox when I login remotely to the webmail exchange account. My inbox on my office PC is fine but the emails do not display in my inbox when I login to the webmail exchange account.
    THis happens on other Mac computers, not just my personal computer at home. It's the same thing when I login from my gym

    Does the Outlook Exchange client is up-to-date?

  • How do I turn off the Icloud erase when the phone is turned on?

    My husband is a ship captain and He thought he lost his phone, I went through all the procedures of changing his account numbers etc on email
    only thing he has on his phone is facebook and email  . He didn't have the find my phone app on when he lost it so I deactived it on our cell provider
    and from I cloud I set up the find my phone to erase it when its turned on.
    Well yes he found it, so I have set back up with the cell service but how do I turn off the find my phone from erasing it when he turns it back on?
    And what is it going to erase??
    Will he still be able to use it as a phone at least?
    thanks for your help!

    Too bad.  It completely erases the phone so it will be like it was when it came out of the box.  He will need to go through the initial setup screens on the phone again to reactivate it before he can use it, and it will require entering his iCloud password to do so.

  • 8900 error code when synchronis​ing to outlook 07

    Hi Everyone,  I have recently been getting an error message when synchronising to outlook 07 on my 8900.
    The error messages appears when it comes to syncing my calendar and comes up with error code 0x80004fceb
    Has anyone come across this before?
    What it means is that I can't sync my calendar
    Many thanks
    Rich

    Hi and Welcome to the Forums!
    That error code does not result in anything in the public KB's...are you sure that's the exact code? And is there any other text with it?
    Lacking that, I would suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista, use the "Run As Administrator" option for everything.
    1) Remove your device OS update package from your PC (add/remove programs)
    2) Cleanly uninstall the RIM DTM software:
    KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
    3) Get a fresh download of the RIM DTM software:
    http://na.blackberry.com/eng/services/desktop/
    Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchornizing via USB):
    KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
    4) Download (to your PC) a fresh copy of your device OS package from your carrier:
    http://na.blackberry.com/eng/support/downloads/dow​nload_sites.jsp
    5) Install DTM to your PC
    6) Install (also to your PC), the device OS package
    7) Start the organizer configuration over:
    KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
    Hopefully that will get things going again.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Problem: software changes my Outlook contact info when synchronizing (cuts off part of first name)

    When I sync, the BB software cuts off part of the first name of my Outlook contacts.  The problem seems to happen when I have a space in the first name (eg: First Name - Bill & Jane).  I have several of my contacts listed that way so I can see spouses of contacts easily.  I have never had this problem before with my other MS Op phone.  Thanks for your help.
    Message Edited by friedchicken on 01-05-2009 01:23 AM

    I found out what happens.
    Wherever the First Name filed on the BB contains a Blank (or Space) character, when synchronizing to MS Outlook, the content of the field is divided in two parts: the first part, before the Blank, is transferred to the Outlook First Name field, the second part, after the Blank, is transferred to the Outlook Middle Name  field.
    This goes beyond the useser's intentions and is a nuisance, becuase you can of course turn around the problem after synchronization, by exporting the MS Outlook contacts to MS Access, or MS Excel, put the two fields together, and reimport them into MS Outlook. But you need to do that each time yoy synchronize.
    It would be nice if RIM could fix the issue.

  • HT4061 i have a iphone 3gs and recently I Erase All Contents and Settings, now my phone is asking me to update to itunes but when I do it comes up with the message...error 10.15, can someone please help?

    i have a iphone 3gs and recently I Erase All Contents and Settings, now my phone is asking me to update to itunes but when I do it comes up with the message...error 10.15, can someone please help?

    Your headline says iPhone 3GS, but your text says 3G.
    iPhone 3G is not compatible with iOS5. 3GS is.

  • I bought a new Iphone 4s, gave the older to my wife , made a new account for her, erased all data and now when i sync them they interfere with the other. Eg: if i delete an app ou buy one it appears on her phone, what shoul I do?

    I bought a new Iphone 4s, gave the older to my wife , made a new account for her, erased all data and now when i sync them they interfere with the other. Eg: if i delete an app ou buy one it appears on her phone, what should I do?

    Have a look here...
    Automatic Downloads...
    http://support.apple.com/kb/ht4539
    Turn off Automatic Downloads. Settings > Store

  • I added all my contacts and when i turned off and on my phone they all erased

    i added all my contacts and when i turned off and on my ph they all erased. why?

    Hi Laura-Ann V,
    If you are having issues with Contacts and Calendars in iCloud, you may find the following article helpful:
    iCloud: Troubleshooting iCloud Contacts
    http://support.apple.com/kb/ts3998
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/ts3999
    Regards,
    - Brenden

  • Updated to iOS 7, when my phone came on for the first time I could see I had 2 new viber messages.  When I went to open viber it asked me to register my number, which I did. Once the app was open I noticed all my message history was gone.

    Hi,
    I have only just upgraded to iOS 7 on my iPhone 4 and am having a  problem with Viber. When my phone came on for the first time after the update I could see I had 2 new viber messages, when I went to open viber it asked me to register my number, which I did. Once the app was open I noticed all my message history was gone...
    I still have an itunes backup of my phone just before the update, I restored it to this backup, followed the same process and now viber will not even work (the access code wont sms to me and the phone call option for recieving this code also come up with some error about not being able to do this at this time).
    I have been able to access viber using another phone number (I have two sims which I use as I am currently overseas in south korea, my referenced australian sim has worked previously on viber overseas and I definently do have roaming on) but again I have no message history.
    So to questions:
    1) Why is my activation not working under my referenced australian number?
    2) Can I recover all my message history which should be saved in my itunes backup?  I am willing to revert to this backup state again if needed.
    Please help.
    Thanks.

    Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.

  • Will i loose all my music when my phone gets synced to my windows computer?

    I have an iphone and ipad all backed up to icloud. I will be getting a dell labtop soon and i am just wondering if when i sync my phone to the computer will i lose all of my music?

    Your iPod Touch will be erased when you update to the new iOS4 and synced with what is in your iTunes library, You should consult the following post for some useful hints on what to do.
    http://discussions.apple.com/thread.jspa?messageID=10570955#10570955
    It is important to backup. Purchased songs, videos, iPod Games, and albums can be downloaded only once.

  • How to erase all content and settings when ipad requests password

    How to erase all content and settings when ipad requests password?

    gomike! wrote:
    when I dont remember my Apple ID password
    It should be the same AppleID and password you use to log in here.
    I haven't installed Find my iPhone app on the phone?
    Installing the app will simply allow you to locate a different iDevice.
    You don’t need to use it to locate the iPhone in your hands. If it’s not in your hands, you cannot use the app on that device...

Maybe you are looking for

  • How can i Create a PROGRESSIVE BAR   while process of a procedure is going

    hi, I have a push button in my form that runs the procedure .the process will approx 15 minutes. while processing is started, i want to display PROGRESSIVE BAR until process complete and exits automatically after process . please suggest me how to cr

  • ITunes restored has lost my music and crashes every time I open it

    Please help.  I noticed my iTunes had disappeared from my PC (Windoes Vista) so uninstalled all iTunes related programs as per support page guide and then reinstalled.  I then got the ".itl" error so added ".itl" to the itunes folder as per a web gui

  • Unable to view photos in library. I already rebuilt my tumbnail caches....

    I am having the this problem: I can see the photos on the scroll in small view but when I click on a photo to make it large and view it there is a gray screen with a white dotted line around an exclamation point. I rebuilt the thumbnail cache, as som

  • CSS HTML5 DWCS6 web template question

    I have a Responsive website template I am editing. There is only one issue I am having with the template. When I remove the background image because I don't need the quotes and view the site in mobile view in ADOBE DREAMWEAVER CS6, the text is thrown

  • How to Connect SAP R3 from BO Enterprise XI R2 designer

    Hi,    I have installed BO Enterprise XI R2 with Server Option and configured SAP ECC system. And Install Intergration Kit for SAP also. Now my problem is, I installed BO Enterprise XI R2 with Client Option. When I Open New connection for SAP  throug