All requests has to be compressed Before Archivng in BI.7

Hi,
I have an issue while Archiving in BI.7.
The deletion program fails saying that the Data to be archived has to be compressed completely.
I am archiving based on Fiscper and relevant data exist in uncompressed request.
Any Inputs appreciated.
Thanks,
surendra

It's not your graphics card. It's not your OS. It's not your browser.
It's your internet. I had a broadband card, and I figured out that my ISP (Internet Service Provider) was actually downgrading my image quality to make my internet faster. It's called Network Optimization. Look in the options menu of your broadband connection application (Like if you have T-Mobile or whatever, look in the part the application that connects you to the internet) and see if you can change your Optimization Settings. This should clear things up for you.
Also, if your internet is really that slow, like mine was, I would suggest getting another provider. It's the best option. Hope that helps. :)

Similar Messages

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions.

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions. HELP PLEASE!

yeah i plugged in my iphone to my computer and itunes does not even notice that i plugged it in.

Error has occured during install before the requested operation for i tunes could not be completed your system has not been modified

error has occured during install before the requested operation for I tunes could be completed Your system has not been modified to complete the install run the installer again and I have it still won't work

See:
Trouble installing iTunes or QuickTime for Windows

Keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling :(

keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling
I recently bought some new albums and can't play them on my ipod

I just encountered the same problem on my 2 month old MBPro. I found a work around by changing USB ports. As for the actual cause or the reason why that worked, I dont know. The USB port I was using works fine with my phone or other USB devices.

How can I tell how long a request has been sitting on an execute queue?

Is it possible to determine (in WL 8.1 and/or 10.3) how long an HTTP request has been sitting on the execute queue before being assigned to a servlet?
Under heavy load, I'm finding that the caller times out by the time the servlet tries to write the response because the request has been waiting on the execute queue for too long. To prevent doing all the work to process the request, I want to be able to see how long the request has been waiting to determine whether it's worth processing the request.
Currently I use the getExecuteThreadTotalCount() method in ExecuteQueueRuntimeMBean and assume that if the count is high, the request has probably been waiting for a while, but getting the actual time on the queue would be much better.
Thanks.

Further investigation and a bunch of speed tests later, I'm even more puzzled. Between 7 pm and 9pm this evening, download speed has been consistently at 112kb, except for the 1 in 10 occasions where it hits 1.5mb, for 30 or 40 seconds, before dropping back to 112kb.
Does anyone have any ideas what is going on?
thanks in advance
Ben

The request has timed out after 00:00:00 milliseconds.

Hello,
I am having weird exception when I try to send a message to a topic and there's nothing on the internet I could "google with Bing" about it.
Here's the error message
The request has timed out after 00:00:00 milliseconds. The successful completion of the request cannot be determined. Additional queries should be made to determine whether or not the operation has succeeded.
There are two things weird about it:
The timeout period is 0 miliseconds
The number of miliseconds is given in format 00:00:00
Here's the whole stack
Timestamp: 5.5.2014. 11:15:58
Message: HandlingInstanceID: b9fcc3c8-c167-47ab-8473-ae45bfb62311
An exception of type 'System.TimeoutException' occurred and was caught.
05/05/2014 11:15:58
Type : System.TimeoutException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Message : The request has timed out after 00:00:00 milliseconds. The successful completion of the request cannot be determined. Additional queries should be made to determine whether or not the operation has succeeded.
Source : Microsoft.ServiceBus
Help link :
Data : System.Collections.ListDictionaryInternal
TargetSite : TAsyncResult End[TAsyncResult](System.IAsyncResult)
HResult : -2146233083
Stack Trace :
Server stack trace:
Exception rethrown at [0]:
at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.ServiceBus.TokenProviderHelper.EndGetAccessTokenCore(IAsyncResult result, String& expiresIn)
at Microsoft.ServiceBus.TokenProviderHelper.EndGetAccessTokenByAssertion(IAsyncResult result)
at Microsoft.ServiceBus.SharedSecretTokenProvider.OnEndGetToken(IAsyncResult result, DateTime& cacheUntil)
at Microsoft.ServiceBus.TokenProvider.GetTokenAsyncResult.OnEndTokenProviderCallback(IAsyncResult result, DateTime& cacheUntil)
at Microsoft.ServiceBus.TokenProvider.GetTokenAsyncResultBase`1.OnCompletion(IAsyncResult result)
at Microsoft.ServiceBus.TokenProvider.GetTokenAsyncResultBase`1.<GetAsyncSteps>b__f(T thisPtr, IAsyncResult r)
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.EnumerateSteps(CurrentThreadType state)
Exception rethrown at [1]:
at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.ServiceBus.TokenProviderUtility.GetMessagingToken(TokenProvider tokenProvider, Uri baseAddress, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.GetAuthorizationToken(String appliesTo, String action)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.GetAuthorizationHeader(String action)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.CreateWcfMessageInternal(String action, Object body, Boolean includeToken, String parentLinkId, RetryPolicy policy, TrackingContext trackingContext, RequestInfo requestInfo)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.CreateWcfMessage(String action, Object body, String parentLinkId, RetryPolicy policy, TrackingContext trackingContext, RequestInfo requestInfo)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageSender.SendCommandAsyncResult.CreateWcfMessage()
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpTransactionalAsyncResult`1.<GetAsyncSteps>d__40.MoveNext()
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.EnumerateSteps(CurrentThreadType state)
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.Start()
Exception rethrown at [2]:
at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageSender.EndSendCommand(IAsyncResult result)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageSender.<.ctor>b__1(IAsyncResult result, Boolean forceCleanUp)
at Microsoft.ServiceBus.Messaging.BatchManager`1.PerformFlushAsyncResult.OnSingleOperationCompleted(IAsyncResult result)
Exception rethrown at [3]:
at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.ServiceBus.Messaging.BatchManager`1.BatchedObjectsAsyncResult.End(IAsyncResult result)
at Microsoft.ServiceBus.Messaging.BatchManager`1.EndBatchedOperation(IAsyncResult result)
at Microsoft.ServiceBus.Messaging.BatchManagerAsyncResult`1.OnBatchedCallback(IAsyncResult result)
at Microsoft.ServiceBus.Common.AsyncResult.AsyncCompletionWrapperCallback(IAsyncResult result)
Exception rethrown at [4]:
at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageSender.OnEndSend(IAsyncResult result)
at Microsoft.ServiceBus.Messaging.MessageSender.RetrySenderAsyncResult.<GetAsyncSteps>b__f(RetrySenderAsyncResult thisPtr, IAsyncResult r)
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.StepCallback(IAsyncResult result)
Exception rethrown at [5]:
at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.ServiceBus.Messaging.TopicClient.EndSend(IAsyncResult result)
at System.Threading.Tasks.TaskFactory`1.FromAsyncCoreLogic(IAsyncResult iar, Func`2 endFunction, Action`1 endAction, Task`1 promise, Boolean requiresSynchronization)
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.GetResult()
at Niva.Framework.Azure.Bus.AzureServiceBus.<EnqueueAsync>d__0.MoveNext() in c:\nivatech\papiri\source\framework\Azure\Bus\AzureServiceBus.cs:line 98
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.GetResult()
at Niva.Framework.Analytics.BusinessActivityLogRepository.<EnqueueAddAsync>d__29.MoveNext() in c:\nivatech\papiri\source\framework\Core\Analytics\BusinessActivityLogRepository.cs:line 51
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.GetResult()
at Niva.Papiri.Web.Controllers.BaseController.<RegisterActivityAsync>d__4.MoveNext() in c:\nivatech\papiri\source\web\site\Controllers\BaseController.cs:line 102
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.GetResult()
at Niva.Papiri.Web.Controllers.HomeController.<Index>d__0.MoveNext() in c:\nivatech\papiri\source\web\site\Controllers\HomeController.cs:line 35
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeAsynchronousActionMethod>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.WrappedAsyncResult`1.CallEndDelegate(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.WrappedAsyncResultBase`1.End()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethod(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.AsyncInvocationWithFilters.<InvokeActionMethodFilterAsynchronouslyRecursive>b__3f()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.AsyncInvocationWithFilters.<>c__DisplayClass48.<InvokeActionMethodFilterAsynchronouslyRecursive>b__41()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass33.<BeginInvokeActionMethodWithFilters>b__32(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.WrappedAsyncResult`1.CallEndDelegate(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.WrappedAsyncResultBase`1.End()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethodWithFilters(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass21.<>c__DisplayClass2b.<BeginInvokeAction>b__1c()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass21.<BeginInvokeAction>b__1e(IAsyncResult asyncResult)
Additional Info:
TimeStamp : 5.5.2014. 11:15:58
FullName : Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Version=6.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
AppDomainName : /LM/W3SVC/2/ROOT-1-130437489467023302

We had the same issue and solved it.
We changed the authorization of the servicebus to SAS and all is working fine now.
1. Check Azure Portal select your ServiceBus and go to register configuration
2. You need the Name and Key of existing Rule (here RootManageSharedAccessKey) or insert a new Rule. We created a new rule with no manage access.
3.1 In Code:
Replace the SharedSecretCredentials with SAS Tokenprovider and add it to the endpoint behaviors like before
TransportClientEndpointBehavior sas = new TransportClientEndpointBehavior();
sas.TokenProvider = TokenProvider.CreateSharedAccessSignatureTokenProvider("NAMEofRULE","KEYofRULE");
3.2 App.Config:
Simply change the tokenprovider line from
<behaviors>
      <endpointBehaviors>
        <behavior name="sharedSecretClientCredentials">
          <transportClientEndpointBehavior>
            <tokenProvider><sharedSecret issuerName="ACSNAME" issuerSecret="ACSKEY"/></tokenProvider>...
to
<sharedAccessSignature keyName="NAMEofRule" key="KEYofRULE"/>
Hope it helps!

Archiving BI.7.0: Must data in InfoCube be compressed before archiving run?

Hi Expert
I have created a Data Archiving Process (DAP). It is execute by a archiving process variant in a process chain.
Archiving an InfoCube works fine when all requests are compressed.
However, when I have some requests in the InfoCube that isn't archived I get the following error:
07.11.2008 14:47:07 Data area to be archived is not completely compressed yet I RSDA 148
07.11.2008 14:47:07 Exception condition in row 105 of include CL_RSDA_ARCHIVING_REQUEST=====CM015 (program CL_RSDA_ARCHIVING_REQUEST=====CP) I RSDA 140
I cannot find anywhere it is stated that all requests have to be archived and I cannot find any OSS's about this subject as well.
Have you got any experience in this matter?
Thanks in advance and kind regards,
Torben

Hi,
First of all, i want to thank you for your help!
but i have a question about a case:
Loading Date     Loading N°      FISCYEAR     Order N°          Turnover
31/12/2007         1                          2007                     Order 1            100
01/01/2008         2                          2008                     Order 1            -50
02/01/2008         3                          2007                     Order 1             60
The loading date corresponds to the Request Date.
In our case, we have compressed Data wich Request Date is < 2008, and we want to archive data wich FISCYEAR = 2007.
In this case, we will find the chrgt 1 in the E-Table, and chrgt 2 & 3 in the F-Table.
The goal of the 3rd Loading is to recover Data wich correspond to the year 2007 and that has not been recovered by the SAP System .
For exemple, in my case, Data (wich come directly from the stores ) are sent everyday to SAP, but due to a problem, we didn't receive Data.
So, The 3rd Loading will allow us to recover those Data.
How will i do to archive the entire data that correponds to FISCYEAR = 2007, knowing that i do not have all of them in requests wich Loading Date is < 2008.
Thanks for your help.
Salah Lamaamla

CSS11501 direct all requests to one server?

Hi,
We have a CSS 11501 with 2 webservers behind it. The people from serveradmin want one webserver to be used for all requests, and only use the second one when the first one gets too busy (let's say > 80 %)
So in a very busy scenario, both webservers would be used
I've looked into Primary sorry server but believe that's only to be used when the first webserver dies, so this does not apply.
I also thought about using different weights for the services, but even when you give webserver 1 a weight of 10, and webserver 2 a weight of 1, there will still be requests forwarded - albeit very few - to webserver 2, right?
Anyone encountered this before? Any help greatly appreciated.
Regards,
Radboud

firs you have to define what is 80%
The CSS has now knowledge of the capacity of the servers.
I see 2 options to define 80%.
First you know that your box can handle 100 connections.
So you can define 80% to be 80 connections.
You could then configure maxconn to 80.
The primarysorryserver will kick in once maxconns has been reached for all other servers.
Another solution is a script on the server itself that measure the load and update a file with a value ON or OFF.
When reaching 80% of maxload, simple rewrite the file with the vaule off.
On the CSS create a keepalive to read this file and disable the service if the value is off.
When disabled, the primarysorryserver will kick in.
Regards,
Gilles.

Csom error The property or field 'LoginName' has not been initialized. It has not been requested or the request has not been executed. It may need to be explicitly requested.

Hi sir,
When I have get the value of project owner the error is occured
The property or field 'LoginName' has not been initialized. It has not been requested or the request has not been executed. It may need to be explicitly requested.
vijay

Hi Vijay,
The owner details are not loaded by default when you load all projects.
You have to make sure the details of the project owner are loaded before you can access them:
foreach (PublishedProject pubProj in projContext.Projects){
User owner = pubProj.Owner;
projContext.Load(owner);
projContext.ExecuteQuery();
Console.WriteLine(owner.LoginName);

IPlanet sending ALL requests to WebSphere 5.1

Static html that exists at iPlanet's docroot cannot be served. All requests, whether servlet, jsp, or html appear to be passed on to WebSphere. Even NameTrans directives in the obj.conf are ignored. We are migrating from WAS 3.5.6. Below is the modified section of the obj.conf with the modifications highlighted:
<Object name="default">
NameTrans fn="strip-params"
NameTrans fn="pfx2dir" from="/manual" dir="/usr1/WWW_Enterprise/manual/https" name="es-internal"
NameTrans from="/IBMWebAS" fn="pfx2dir" dir="/proj/WebSphere/AppServer/web"
NameTrans fn="pfx2dir" from="/ns-icons" dir="/usr1/WWW_Enterprise/ns-icons" name="es-internal" name="es-internal"
NameTrans fn="pfx2dir" from="/mc-icons" dir="/usr1/WWW_Enterprise/ns-icons" name="es-internal"
NameTrans fn="pfx2dir" from="/help" dir="/usr1/WWW_Enterprise/manual/https/ug" name="es-internal" name="es-internal"
NameTrans fn="pfx2dir" from="/manual" dir="/usr1/WWW_Enterprise/manual/https" name="es-internal"
NameTrans fn="document-root" root="$docroot"
PathCheck fn="unix-uri-clean"
PathCheck fn="check-acl" acl="default"
PathCheck fn="find-pathinfo"
PathCheck fn="find-index" index-names="index.html,home.html"
ObjectType fn="type-by-extension"
ObjectType fn="force-type" type="text/plain"
Service fn="as_handler"
#Service fn="service_exit"
Service method="(GET|HEAD)" type="magnus-internal/imagemap" fn="imagemap"
Service method="(GET|HEAD)" type="magnus-internal/directory" fn="index-common"
Service method="(GET|HEAD)" type="*~magnus-internal/*" fn="send-file"
AddLog fn="flex-log" name="access"
</Object>
And here is the portion of the magnus.conf that changed:
Init fn="load-modules" funcs="as_init,as_handler,as_term" shlib="/proj/WebSphere/AppServer/bin/libns41_http.so"
Init fn="as_init" bootstrap.properties="/proj/WebSphere/AppServer/config/cells/plugin-cfg.xml"
The applications that we are converting have a context-root of "/", which I fear may be part of the problem. I believe that may be why all the requests are handled by WebSphere. Unfortunately I do not know how this can be changed without massive modifications on our clients' end. For example, clients normally access our app using /ABC.cgi which really maps to a servlet. Having them change their pages to access /myWebApp/ABC.cgi instead would not go over well.

I'm not familiar with WebSphere plugin configuration, but you can configure Web Server to control which requests are passed to the plugin. In your current obj.conf file, the Service fn="as_handler" directive appears before all other Service directives, so the WebSphere plugin can choose to service any request. It appears that it's choosing to service all of them.
Instead, you could modify your obj.conf file so that Service fn="as_handler "is invoked only for certain requests. For example, you could remove Service fn="as_handler" from the default object and move it to a new object named "was":<Object name="WAS">
Service fn="as_handler"
</Object>Then, in the object named "default", you could choose which requests should be treated as WAS requests:<Object name="default">
NameTrans fn="assign-name" from="*.jsp" assign-name="WAS"
</Object>Again, I'm not familiar with WebSphere plugin configuration, so it may be possible to do the same sort of thing through the WebSphere plugin-cfg.xml.
(Since you're migrating from one application server version to another, I should point out that Web Server has a fully functional Servlet container built in. You could run all your Servlets in Web Server itself.)

It is asking me for a password when I want to update my ipad, it has never done this before. I thought it ment my Apple ID but it didn't work and my ipad is now disabled. What should I do ? Is there a way of getting my password sent to me ?

It is asking me for a password when I want to update my ipad, it has never done this before. I thought it ment my Apple ID but it didn't work and my ipad is now disabled. What should I do ? Is there a way of getting my password sent to me ?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I restarted my mac and many apps and files disappeared. It's like it booted to a state several months ago. My CS 5 apps are not in the dock or applications folder. Has this ever happened before and what can I do?

It's like it booted to a state it was in several months ago. My CS 5 apps are not in the dock or applications folder. Has this ever happened before and what can I do?
The files on my desktop are not the ones that were there when I shut down. It's like it's gone back in time.
My display's power supply got fried (I think) in a power outage so I bought a new one. However, every time I restart the display usually stays black. I have found I need to keep rebooting until it kicks in and starts working. I unplug everything, wait a while (a few minutes to overnight) and try booting again.
This last time the display finally came on but I'm faced with this problem. I used to use time machine, but I deleted everything and disabled it a couple months ago or more so I'm at aloss as to why the mac is booting into the state it was in sevearl months ago.
What could I have done to cause this? Has this ever happened to anyone else and is there a solution?
Note: I did a search for a file I knew was created today. I found it and it showed that it was a file I had saved on the desktop this morning--even though that file's icon is not appearing on the desktop now.
I did a search for photoshop and saw my CS5 version listed.
However, I did a couple more searches and these files no longer appear in the search. I don't know if they're there or not. This is bizarre!
I'm on a Mac Pro, 10.6.2.

Thanks for the obvious question. I mean it. The very same thought came to me this morning and, sure enough, I had booted into another drive--my old one that, of course, had the old desktop, etc.
It didn't dawn on me that this was the case since I hadn't set it as a boot drive but I guess in the course of all the restarts I did, it got switched.
I'm back to normal again.

How to find out if a transportation/accomodation request has been changed?

Hello all,
I need to know if one transportation/accomodation request has been changed after being created. I am using the TRIP standard transaction to plan the travel request without any external agency integration.
My problem is that if I change any field of one travel request such as: begin time, city from, destination or whatever, I cannot
find any field or table that lets me know there has been a change.
I am using an user exit that triggers once you have pressed the "Save" button, but there is no info about the travel requests. There is info about the cluster of the trip, but not about the travel requests. Only the FTPT_REQUEST database gives me this information, but only the final one, so I cannot compare the previous values with the last ones.
Can you please help me with this topic? I don't know how to solve it.
Thank you very much in advance.
Best regards.

Hi,
you can use trace event ST01 or using SAP standard workflow.
as per standard workflow WS20000050 for travel request, while in travel request workflow for approval there is task of "wait for event" that could know if you are changing your travel request it will flow to stop workflow and start it again.
for details, maybe you could see sap workflow SWDD and open workflow of WS20000050.
hope it helps.
thanks.

How to notify a self registered user that his/her request has been denied

Hello,
Is there a way to send an email to the requestor (this email address is what the user puts in the self registration form under requestor email) to notify that the request has been denied? (OIM 9.1)
In The User Registration Process Definition, Task Awaiting Approval Data, I have the Assignment Tab set as follows:
Rule: Default
Target Type: Group
Adapter AssignApproverGroup (this adapter dynamically looks for the members in a group based on the requestor organization, assigns the task to these individuals, and sends an email notifying that self registration approval is pending to all members of that approvergroup)
Priority: 1
Notification Tab
Assignee is checked
Status: R
Email: Self registration request Denial
When the Assignee logs in and denies the request, an email is sent to the Assignee about the denial.
Questions:
1. If the ApproverGroup has more than 1 member, how can we notify all the members of the Approver group that the request has been denied?
2. How can we notify the requestor that his/her request has been denied using his/her provided email from the self registration form?
Thanks
Edited by: Khanh on Dec 4, 2008 3:36 PM

You need to think about how the whole system is going to work - you need to know everything that the button will require, and then think about how to provide this information to the button.
So, by the sounds of you need say a single button to press when you want to add a new button to the calculator. Associated with this have text fields that take the function for the calculator. I would specify that the function uses variables e.g. x and y as in function = x * y. Then your program could parse the input string describing the function, by recognising "*" to mean * in the Java code syntax and "/" to mean /. Then treat everything else as variables. Since you can filter out the other variables i.e. not the operators, you can then say associate an array to contain the values of these. Then when the user uses the button and specifies the input parameters and presses the button, you can update this array, and perform the calculation based upon these values.
Hope this helps.
My advice really is just to think about everything that a button that creates new function buttons is going to need.
PS. Remember to repaint the GUI once update its Container. Swing does this automatically, but I always specify it explicitly anyway to be safe. You can use either repaint(), validate(), or revalidate().
Goodluck mate!

[Execute SQL Task] Error: Executing the query failed with error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION."

I have an package with source , data flow and destination to execute on begin and commit.
in the below i have just used for questioning purpose with diagram removing my Data Flow task explaining my problem
on execution, i get error as
[Execute SQL Task] Error: Executing the query "COMMIT TRAN DimCompanyCode" failed with the following error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.". Possible failure reasons: Problems with the query, "ResultSet"
property not set correctly, parameters not set correctly, or connection not established correctly.
as mentioned , i have checked the ResultSet, parameters , connection establish.. all are fine.
Kindly advice on what has to be done.
ShanmugaRaj

To avoid this error, the RetainSameConnection property should set to 'True' for the Connection Manager - Application_DB.
Narsimha

All requests has to be compressed Before Archivng in BI.7

Similar Messages

Maybe you are looking for