All RVS-4000's with firmware versions less than 1.3.2.0

Hi,
For those of you without the time to explore the Cisco site. I thought you guys might want to know about the following vulnerability. Which is fixed in the latest firmware version 1.3.2.0 for the RVS-4000:
Cisco Security Advisory: Cisco Small Business Video Surveillance Cameras and Cisco 4-Port Gigabit Security Routers Authentication Bypass Vulnerability
Document ID: 111641
Advisory ID: cisco-sa-20100421-vsc
http://www.cisco.com/warp/public/707/cisco-sa-20100421-vsc.shtml
Revision 1.1
Last Updated 2010 MAY 19 2030 UTC (GMT)
For Public Release 2010 APR 21 1600 UTC (GMT)
Software Versions and Fixes
To determine the software version running on a camera, administrators can click the "About" tab at the top-right of the device user interface. The software version information can be obtained on the System Status page under the "Status" tab.
The latest camera software can be downloaded at http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=282414029 ( registered customers only) .
The software version of the RVS4000 is displayed on the main router page displayed after users log in.
The latest RVS4000 software can be downloaded at http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=282413304 ( registered customers only) .
When considering software upgrades, also consult http://www.cisco.com/go/psirt and any subsequent advisories to determine exposure and a complete upgrade solution.
In all cases, customers should exercise caution to be certain the devices to be upgraded contain sufficient memory and that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, contact the Cisco Small Business Support Center or your contracted maintenance provider for assistance.
Product
First Fixed Version
PVC2300
1.1.2.6
WVC200
1.2.2.0
WVC210
1.1.0.15
WVC2300
1.1.2.6
RVS4000
1.3.2.0
Bruce

Yes, I posted this same information in the Video Surveillance section a few weeks ago. it was actually a Partner on the
community who found this and brought it to our attention and we fixed it.
Thanks for cross posting here, since you are right in it also effected this router.
And a big thank you for taking the time to collaborate some very useful information with the community. I have noticed your recent posts and I think they are well writen, helpful, and well organized. I also like your idea of turning some threads into solutions documents and resource labs perhaps.
If you would ever like to post something of that natire, you may also. Just creat a document with your findings.
Steve

Similar Messages

I have a WRT54G Wireless modem with firmware version 1.02...

I have a WRT54G Wireless modem with firmware version 1.02.1 Mar 4 2003. i down loaded the latest firmware for the modem but i can't install it. I get the erroe message"incorrect image file".
What is wrong?

Which version of the WRT54G do you have? If it is not clearly stated on the router, go to Wikipedia.org and search for WRT54G, then you can use your router's serial number to determine which version of the router you own.
The version of the router is important. Each version has a different set of hardware in it, so each version takes a different firmware.
You can only load the firmware that corresponds to your model and version.

HT201210 Hellow every one. i just updated my iphone 5 with the ios7. unfortunately i experience different type of bugs...the most important one to me is that the itunes store do not open at all. i'm disappointed with this version of iOS.

Hellow every one. i just updated my iphone 5 with the ios7. unfortunately i experience different type of bugs...the most important one to me is that the itunes store do not open at all. i'm disappointed with this version of iOS. my itunes version is updated and my mc version is also updated
my question is: how can i make itues store to work? how can i go back to the previous version of ios?

Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
$19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard.

Problem with the operator less than or equal to in a weby query

Hi all.
The universe is a OLAP Universe
When i created a query in webi and put the month in the filter area with the operator less than or equal to like this.
Month (less than or equal to) 2010.01 for example. The all result brings also the all values like 2010.02, 2010.03, etc
What is the problem and how can fix that ?
Thanks

Looks like you are using a less than or equal to with a Sting data type.
I think you should change to your filter to Year <= 2010 And Month <= 1. Hope you have a month and year object in you BeX.
Anil

My iphone has recently loss about 10G of memmory. I check through settings/general/usage, all apps I had add up to less than 2G. I used to be able to take around 2hrs of video and now I can't take any. Can anyone help? Thanks

My iphone has recently loss about 10G of memmory. I check through settings/general/usage, all apps I had add up to less than 2G. I used to be able to take around 2hrs of video as I like to record down whatever happening in front of my car when I'm driving. I delete the videos everyday ifn nothing special. It seems that lately when I deleted the videos, they're not removed from the phone's memmory.
I check form setting/general/usage : all my apps add up to less than 2G. In itune, it shows all memmary is under the catagory "other". Is there any way I can access this "other" memmory to see what's in it and delete the things I don't want to regain the loss memmory?
Thanks

You could always try restoring, although maybe someone else on here has a better idea.
Hopefully by posting this, it will bump up and someone with more iPhone troubleshooting experience might chime in.
As for the videos - interesting! Do you have the iPhone on one of those window holders, or do you hold it in your hand since that might ironically distract you, unless you've gotten very good at it!

I have started migration système to transfert from hold Macbook pro to New MacBook air application starter successfully for several hours. But since more than 3 hours I got the message transferring Time zone paramètres with time left less than 1 minute.

Hi
I have started migration système to transfert from hold Macbook pro to New MacBook air
Application starter successfully for several hours.
But since more than 3 hours I got the message "transferring Time zone paramètres " with time left less than 1 minute.
Any recommendation or suggestion to solve it ?
Many tanks

If it has run for 3 hours it's probably done and you can quit Migration Assistant and reboot the new computer. In the future rather than using Migration Assistant I would recommend using Startup Assistant which tends to be a bit more reliable and does not create a new user account as MA does. If you're interested here is an article explaining Setup Assistant tips.
Roger

My ipod touch 4g is missing alot of important apps like settings, music, itunes store, app store and many more and i was wondering if there is any way at all to fix this for free or less than 70 dollars

My ipod touch 4g is missing alot of important apps like settings, music, itunes store, app store and many more and i was wondering if there is any way at all to fix this for free or less than 70 dollars

First try using Spotlight Search to find Settings. If that works go to Settings > General > Reset > Reset Home Screen Settings. If you can't get to Settings:
Try a reset:
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
If that doesn't work do a restore from backup or to factory settings:
http://support.apple.com/kb/ht1414

Battery Update 1.4 does not update my battery with firmware version: 102a

Hello,
I was happy to see this update come out recently as my battery does lose power when the computer is powered down but I wanted to fully research it first because there's no going back with these firmware updates.
From Apple's page about this 1.4 update:
Batteries with this information in the Battery Information section [of Apple System Profiler] need this update:
A device name "ASMB016" or "ASMB013" in the serial number
A Pack Lot Code is 0002
A battery firmware version of 0110
Everything on my system matches except my battery firmware is version: 102a
Figuring that 102a was a lower firmware version than 0110 I went ahead and installed the update but I don't think my battery has been updated. I got no notice that it was being updated as others, on other forums, have described seeing and nothing in Apple System Profiler has changed.
A quick Google search showed that plenty of other people are asking on the web about this version 102a firmware as well.
So, any idea what the deal is with batteries that have the firmware version 102a? I got this current battery under the recall program as the original one that came with my MacBook was one of the bad ones.
This whole MacBook battery business has been a nightmare. It's wasted hours of my time, and is a real black eye on what is otherwise a good computer experience.
Thanks in advance for any input.

Macophile wrote:
Hello,
I was happy to see this update come out recently as my battery does lose power when the computer is powered down but I wanted to fully research it first because there's no going back with these firmware updates.
From Apple's page about this 1.4 update:
Batteries with this information in the Battery Information section [of Apple System Profiler] need this update:
A device name "ASMB016" or "ASMB013" in the serial number
A Pack Lot Code is 0002
A battery firmware version of 0110
Everything on my system matches except my battery firmware is version: 102a
Figuring that 102a was a lower firmware version than 0110 I went ahead and installed the update but I don't think my battery has been updated. I got no notice that it was being updated as others, on other forums, have described seeing and nothing in Apple System Profiler has changed.
I started thinking about it, and 102a is actually a larger number than 0110.
In any case, the updater was only meant for specific battery revisions.

Query for file version less than 10.0 does not return expected data

I'm trying to build a query for all PCs that have a version of Iexplore.exe in c:\windows\program files\ that is less than 10.0 . When I run the query it returns no data. When I change 10.0 in the query to 9.9 it returns files with version 10.xxx in
the results. Its as if it is seeing 10.0 as 1.0. Is this expected ?
select SMS_R_System.Name, SMS_R_System.ADSiteName, SMS_G_System_SoftwareFile.FileName, SMS_G_System_SoftwareFile.FileVersion from SMS_R_System inner join SMS_G_System_SoftwareFile on SMS_G_System_SoftwareFile.ResourceID = SMS_R_System.ResourceId where
SMS_G_System_SoftwareFile.FileName = "iexplore.exe" and SMS_G_System_SoftwareFile.FilePath = "C:\\program files\\internet explorer\\" and SMS_G_System_SoftwareFile.FileVersion < "9.9"

It is because the values are not integer, they are a string. And therefore 1 is smaller then 9.
http://www.enhansoft.com/

Terrible download speed with Infinity 2 (less than...

I was a relatively early adopter of BT infinity. When I first signup I recieved a consistent 70mbps+ down 80mbps up.
Over the last few months this has dropped to around 40mbps down and 12mbps up.
I posted here regarding the issue, contacted BT, and even Emailed the tech support guys recommended here on this very forum.
Unfortunately nothing improved, however since 40mbps down was okay for almost everything I needed to do I decided to leave it.
Now however, the situation has become dire. For the last month my download speed has been consistently less than 4mbps with my upload speed being 2-3x as fast!
The BT speedtester refuses to complete due to the test taking too long. However I have managed to get a screenshot from speedtest.net.
To make matters worse, webpages down't always seem to complete, with many requests eventually timing out.
I am at a complete loss and would like some advice on where to go from here. I have for all intents and purposes lost faith in the standard BT customer service having spent hours on the phone with them before when my speed dropped to 40mbps a few months ago.
Any advice would be very much appreciated.

Hi
I also am having the exact same issue. I am on the phone now and they are telling me now that is all my line can handle.
This is disgusting, the service is disgusting, cannot get an engineer out. For over 10 months i could get 60mbps steady downloads now i can't
even stream a youtube video!!
even though i have another infinity 2 line in the downstairs living room getting 65mbps steady downloads from the same exchange.

ERROR: PGI in delivery with picked quantity less than delivery quantity

Hi Friends!
I need your help, i have the following situation:
Outbound Delivery with batch position:
90001 Mat DD3450 Picked Delivery Quantity=98 and Picked quantity=84
Overall Pick Status = "B"
Overall WM Status = "C"
The outbound delivery was posted completely and the following documents was generated:
WMS transfer order: With 84 UN in quantity
Material document: With 98 UN in quantity
Invoice: With 98 UN billed
The question is how was posible to generated the PGI for the outbound delivery when the picked quantity was less than delivery quantity? is a SAP program error?
Thanks
Best regards
Enrique

benito,
Check your Picking Confirmation config. as you are using WM/Lean WM, then your Shipping Point should have a mandatory requirement to confirm all TO's. The confirmation should update the Picking Status and the Overall GI Status to 'C' (with any relevant changes to the picked qty). Give that a go.
Cheers,
Paul...

Restrict with variable: selection less than

Hi,
I want to restrict a characteristic against a variable, lets say, Current Fiscal Year. But I want the restriction to be "Less Than" currunt fiscal year and NOT "egual to."
It's an SAP Exit variable that I'm using, so I wana hardcode it to show "less than".
How do I achieve that?
Frank
Message was edited by: Frank

Hi:
For the variable type in query designer, select the Selection Options. Now, when you run the query, you will get to choose all the options inclufing what you want.
If you are not able to see these, create a new variable and make sure you select Type: Selection Options while creating the variable itself.
Ram Chamarty
Message was edited by: Ram Chamarthy

Roll back when trying to install iTunes with the version higher than 10.5

I insall successfully with the iTunes with the version under 10.5. But my iPhone is not supported with those version. So I tried the new versions that are higher than 10.5 but a problem occurred during the installation.
"An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="Win32",version=8.0.50727.6195",publicKeyToken="1fc8b3 b9a1e18e3b",processorArchitecture="x86"'
Please refer to Help ans Support for more information. HRESULT:0x800736FD."
When I click OK, it rolls back. Then it started to run the rest apps of iTunes.
Anyone can help me, please!
Thank in advance!

Maybe no one can help!

Anybody else had recurring issues with MBPs of less than a year old?

Both my son and I bought MBPs less than a year ago, and we've both had two faults develope which were repaired by the store (not Apple) where they were bought. My son's MBP has developed yet another fault, and frankly, I'm fed up of traipsing up and down from one end of our town to the other, waiting 3 or 4 weeks for the repair to be done, only to find that in another 3 months another fault is occuring.
The Apple expert in the store suggested that there might have been a batch issue, as both of our MBPs came from the same batch, and advised contacting Apple.
I'd really rather conduct this by email, as I don't have time to spend hanging around on a phone.
Anyone out there give me some (constructive only) suggestions please?

Many thanks for your help, I'll try to find time today.

B/W video recording in N-93 with firmware version ...

I have noticed the following after I upgraded to firware 20.0.058.in N-93
Do the following :
Pick a low lighted area
Start main camera
Select Video mode
Select Auto mode
The display will show colours
Now switch to night mode
The display will turn to black & white and video will record in B/W too.
Now switch to still mode
Select Auto mode
Display will be in colour
Select Night mode
The display and picture taken will again be in colour with details in dark area revealed
Now the question why does N-93 record / display in B/W
in video mode under the same lighting conditions while in still mode all colours come out perfectly and dark areas
given the fact the N-93 uses the same camera , same CMOS and same image processing software ?
If my post has helped you please click the white star on the right

3Julian
Today I visited Nokia care after i heard from them telling that have put a patch. I went there and saw their N-93 with the patch.Absolutely no improvement. I talked to the senir technical guy about this. He said he will escalalte the matter.
Another thing. Have you tried using bar-code scanner ?
It sucks. It takes ages to decode
If my post has helped you please click the white star on the right

All RVS-4000's with firmware versions less than 1.3.2.0

Similar Messages

Maybe you are looking for