All ****'s broken loose on my MBP. Need advice from the techno savvy!
I have a refurbished MBP that I bought about 2 weeks ago. (from an apple reseller) For the past 3 or 4 days, safari will just shut down randomly and the shutdowns have since increased in frequency. I downloaded Firefox to see if it was a Safari issue and Firefox shut down the same as Safari. Starting last night, I started getting this dark screen overlay and a message that OSX has quit working and I need to restart by pressing the power button. It has happened while using various applications with no pattern. When I restart the computer, I get an error screen that says that OSX had an unexpected error/shutdown and gives me the option to report it to Apple. I will include the problem details below. This afternoon, my optical drive quit working and the only way to get the CD out of the drive is to shut the computer down. Once I insert a CD, the drive keeps "revving", the keyboard backlight pulses with the revving, and it just doesn't sound good. There's no way to end it except hitting the power button. When I try to run Disk Utility, it shows that I have a lot of permissions that are broken, but then it gives me an error message and won't finish or repair them. If anyone has some advice, I'd appreciate it! I didn't get any OSX disks when I bought the computer, so I suspect it will have to be returned back to the shop. I thankfully bought their 2 year insurance that is supposed to cover everything that AppleCare would normally. It's a 2.33 HGz Intel Duo, 2GB. I'm not sure when it was originally released. I'm running 10.5.8 on it. Thanks to anyone who can give me some advice on what to do with it!
Rebecca
Here's the error report:
Interval Since Last Panic Report: 45679 sec
Panics Since Last Report: 2
Anonymous UUID: 968E4DA3-560A-4448-A1B4-E0E4DA604BE2
Fri Jan 29 18:02:32 2010
panic(cpu 0 caller 0x001AB0FE): Kernel trap at 0x0017f403, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0xeeeeef02, CR3: 0x01000000, CR4: 0x00000660
EAX: 0x00000001, EBX: 0xeeeeeeee, ECX: 0x0b264d60, EDX: 0x06636c94
CR2: 0xeeeeef02, EBP: 0x2e3f7a88, ESI: 0x05332000, EDI: 0x00000000
EFL: 0x00010286, EIP: 0x0017f403, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x2e3f7888 : 0x12b4c6 (0x45f91c 0x2e3f78bc 0x13355c 0x0)
0x2e3f78d8 : 0x1ab0fe (0x469a98 0x17f403 0xe 0x469248)
0x2e3f79b8 : 0x1a1713 (0x2e3f79d0 0xb0fa030 0x2e3f7a88 0x17f403)
0x2e3f79c8 : 0x17f403 (0xe 0x48 0x2e3f0010 0x1a0010)
0x2e3f7a88 : 0x17400a (0x6636c94 0x5332000 0x0 0x2e3f7c54)
0x2e3f7ad8 : 0x1d51b5 (0x6636c94 0x5300000 0x0 0x5400000)
0x2e3f7c78 : 0x1d5505 (0x63cd3f0 0x2e3f7ebc 0x5200000 0x0)
0x2e3f7cc8 : 0x342917cb (0x63cd3f0 0x2e3f7ebc 0x5200000 0x0)
0x2e3f7d78 : 0x1f839a (0x2e3f7dac 0x246 0x2e3f7dd8 0x1dc2a2)
0x2e3f7dd8 : 0x1eebce (0x63cd3f0 0x2e3f7ebc 0x811 0x2e3f7f54)
0x2e3f7e68 : 0x391c12 (0x43a8d90 0x2e3f7ebc 0x1 0x2e3f7f54)
0x2e3f7f18 : 0x391d83 (0x2e3f7f54 0x43a8d90 0x22ad9000 0x0)
0x2e3f7f78 : 0x3e3a7f (0x4488794 0xb26e400 0xb26e444 0xb1a16738)
0x2e3f7fc8 : 0x1a1c0a (0xa9860a0 0x0 0x1a40b5 0x4710ee0)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb1a16838
Kernel loadable modules in backtrace (with dependencies):
com.apple.filesystems.msdosfs(1.5.5)@0x34289000->0x34295fff
BSD process name corresponding to current thread: Finder
Mac OS version:
9L31a
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
System model name: MacBookPro2,2 (Mac-F42187C8)
System uptime in nanoseconds: 1341736325435
unloaded kexts:
com.apple.iokit.IOFireWireSBP2 1.9.8 - last unloaded 190146209641
loaded kexts:
com.apple.filesystems.msdosfs 1.5.5 - last loaded 117494887146
com.apple.iokit.IOSCSIReducedBlockCommandsDevice 2.1.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport 1.5.2
com.apple.driver.iTunesPhoneDriver 1.0
com.apple.iokit.IOUSBMassStorageClass 2.0.8
com.apple.driver.InternalModemSupport 2.4.0
com.apple.iokit.IOBluetoothSerialManager 2.1.9f10
com.apple.filesystems.autofs 2.0.2
com.apple.driver.AppleHDAPlatformDriver 1.7.1a2
com.apple.driver.AppleHWSensor 1.9d0
com.apple.driver.AppleHDAHardwareConfigDriver 1.7.1a2
com.apple.driver.AppleUpstreamUserClient 2.7.5
com.apple.driver.AppleHDA 1.7.1a2
com.apple.kext.ATY_Wormy 5.4.8
com.apple.DontSteal_Mac_OSX 6.0.3
com.apple.ATIRadeonX1000 5.4.8
com.apple.driver.AppleGraphicsControl 2.8.15
com.apple.driver.AppleACPILPC 1.0.8
com.apple.driver.AirPort.Atheros 320.16.2
com.apple.driver.AppleHDAController 1.7.1a2
com.apple.iokit.IOFireWireIP 1.7.7
com.apple.driver.AudioIPCDriver 1.0.6
com.apple.kext.AppleSMCLMU 1.4.5d1
com.apple.driver.AppleIRController 113
com.apple.driver.ACPISMCPlatformPlugin 3.4.0a17
com.apple.driver.AppleLPC 1.3.1
com.apple.driver.AppleBacklight 1.6.0
com.apple.driver.SMCMotionSensor 2.1.1d2
com.apple.driver.AppleTyMCEDriver 1.0.0d28
com.apple.driver.CSRUSBBluetoothHCIController 2.1.9f10
com.apple.driver.AppleUSBMergeNub 3.5.2
com.apple.driver.AppleUSBTrackpad 1.7.4f1
com.apple.driver.AppleUSBTCKeyEventDriver 1.7.4f1
com.apple.driver.CSRHIDTransitionDriver 2.1.9f10
com.apple.driver.AppleUSBTCKeyboard 1.7.4f1
com.apple.driver.USBCameraFirmwareLoader 1.0.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.1.1
com.apple.iokit.SCSITaskUserClient 2.1.1
com.apple.driver.XsanFilter 2.7.91
com.apple.iokit.IOAHCIBlockStorage 1.2.2
com.apple.driver.AppleUSBHub 3.4.9
com.apple.iokit.IOUSBUserClient 3.5.2
com.apple.iokit.AppleYukon2 3.1.13b2
com.apple.driver.AppleUSBEHCI 3.4.6
com.apple.iokit.IOATAPIProtocolTransport 1.5.3
com.apple.driver.AppleFileSystemDriver 1.1.0
com.apple.driver.AppleFWOHCI 3.9.7
com.apple.driver.AppleUSBUHCI 3.5.2
com.apple.driver.AppleAHCIPort 1.7.0
com.apple.driver.AppleIntelPIIXATA 2.0.1
com.apple.driver.AppleEFINVRAM 1.2.0
com.apple.driver.AppleSmartBatteryManager 158.10.5
com.apple.driver.AppleRTC 1.2.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIPCI 1.2.5
com.apple.driver.AppleACPIButtons 1.2.5
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.2.5
com.apple.driver.AppleAPIC 1.4
com.apple.security.seatbelt 107.12
com.apple.nke.applicationfirewall 1.6.77
com.apple.security.TMSafetyNet 3
com.apple.driver.AppleIntelCPUPowerManagement 76.2.0
com.apple.driver.DiskImages 199
com.apple.BootCache 30.4
com.apple.iokit.IOFireWireSBP2 1.9.8
com.apple.iokit.IOSerialFamily 9.4
com.apple.driver.DspFuncLib 1.7.1a2
com.apple.iokit.IO80211Family 216.1
com.apple.iokit.IOHDAFamily 1.7.1a2
com.apple.iokit.IOAudioFamily 1.6.9fc5
com.apple.kext.OSvKernDSPLib 1.1
com.apple.driver.IOPlatformPluginFamily 3.4.0a17
com.apple.iokit.IONDRVSupport 1.7.3
com.apple.iokit.IOGraphicsFamily 1.7.3
com.apple.driver.AppleSMC 2.3.1d1
com.apple.driver.AppleUSBBluetoothHCIController 2.1.9f10
com.apple.iokit.IOBluetoothFamily 2.1.9f10
com.apple.iokit.IOUSBHIDDriver 3.4.6
com.apple.driver.AppleUSBComposite 3.2.0
com.apple.iokit.IOSCSIBlockCommandsDevice 2.1.1
com.apple.iokit.IOBDStorageFamily 1.5
com.apple.iokit.IODVDStorageFamily 1.5
com.apple.iokit.IOCDStorageFamily 1.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.1.1
com.apple.iokit.IONetworkingFamily 1.6.1
com.apple.iokit.IOFireWireFamily 3.4.9
com.apple.iokit.IOUSBFamily 3.5.2
com.apple.iokit.IOAHCIFamily 1.5.0
com.apple.iokit.IOATAFamily 2.0.1
com.apple.driver.AppleEFIRuntime 1.2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.iokit.IOStorageFamily 1.5.6
com.apple.iokit.IOHIDFamily 1.5.5
com.apple.driver.AppleACPIPlatform 1.2.5
com.apple.iokit.IOACPIFamily 1.2.0
com.apple.iokit.IOPCIFamily 2.6
According to Mactracker, the 2.33 GHz processor is on the 15-inch and on the 17-inch Core 2 Duo, which was released in October 2006 and discontinued in June 2007. It was originally released with OS X 10.4.8.
You should have been given a set of the original gray system discs and a full retail Leopard disc.
The permissions issue is not something to be overly concerned about:
http://support.apple.com/kb/TS1448?viewlocale=en_US
Your computer has some serious issues, and without the discs and a working optical drive, it probably won't be possible to fix them. So the first thing is to go back to the shop and insist that they fix the optical drive and supply you with the discs that you should have.
Do you have a good backup or access to another Mac? If so, it might be possible to rescue any data on your Mac using FireWire Target Disk Mode:
http://support.apple.com/kb/HT1661
It's likely that your hard drive will need to be reformatted, which would destroy any data you may have on it. So it would be prudent to rescue anything you want to keep before taking it in.
Once you get it back, be sure to run the extended version of the Apple Hardware test, which will be on one of the original system discs.
Also, it wouldn't hurt to download and run this utility:
http://www.versiontracker.com/dyn/moreinfo/macosx/32454
You can download the demo and run it several times for free. It will give you a good analysis of the physical health of your hard drive. It may be that the drive has already been replaced, but if not and it is still the original, then it would be 3 or 4 years old by now. The average useful life of a notebook drive is 3-5 years.
You might also want to look at this article on kernel panics:
http://www.thexlab.com/faqs/kernelpanics.html
Do take it back to the shop and see what they will do for you. I agree with the possibility of getting a replacement machine or your money back if they can't give you the discs and fix the machine to your satisfaction.
Good luck!
Similar Messages
-
All the songs I had unchecked in my library are now checked on on my new MacBook. My playlists are all there, but I do I really need to uncheck the ~3,000 - 4,000 songs I had previously unchecked?
My original library exists on my old computer, so I could still transfer it. Any suggestions are welcome and appreciated - thank you!This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
I purchased an app yesterday called aptitude trainer test and it didn't work at all and today was my test I needed it from to practice so I'm asking for a refund of 2.11 back thank you
We are fellow users here on these forums, you're not talking to iTunes Support.
Did you try deleting the app and redownloading it via the Purchased tab in the App Store app on your iPad, and contacting the developer of the app ? If you did contact them and you didn't get a reply then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
i have multiple devices backed up to the same computer each with different data. how do i keep them from syncing all data when i back up or transfer stuff from the computer to a device? one is an iphone 6 and the others are ipad mini first gens, each ipad has 64gb and the iphone has 128, need to keep the data seperate as they are not all mine
Itunes content and pics are NOT part of the backup that itunes performs.
Backing up, updating, and restoring iPad, iPod touch, and iPhone software
You should transfer any purchases from iphone regularly: File>Transfer Purchases , if they fail to be transferred when you sync.
You buy one and only one download. It is your responsibility to move/copy/backup your purchases.
You can try contacting itunes support and asking for an exception, but they are under no obligation to allow.
http://www.apple.com/support/itunes -
I was lately downlaoding a 700mb file, but i lost the internet connection and only 635mb was downloaded and i have the .part file but the download menu says that download failed so i cant click resume, is their any way that i can continue dowlaoding the file without the need redownloading from the beginning?
I do not know if your file can be recovered. But I may be able help you to recreate it with ease. If you will settle for a composite where all image are re-sized for a particular tile size and virtually cropped to its aspect ratio. However all source image need be gathered into a folder to use my script process. Paste Image Roll Script and Picture Package Support Link http://www.mouseprints.net/old/dpr/PasteImageRoll.jsx
-
I backedup my iphone 4 to the cloud before upgrading to an iphone 5. I also backedup my iphone 5 to icloud. I can see both phone's backups side by side on the my screen on icloud. But it will not allow me to restore the iphone 4 backup to my iphone 5. I need contacts from the iphone 4 backup but I do not have that phone anymore and icloud will only let me restore the iphone 5's backups to my iphone 5. Is there anyway to get the contacts from my previous iphone 4 backup?
You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.
-
Problem: I lost the option to get the sound from external speakers or headphones to upgrade to Lion 10.7.3. It accepts only internal speakers. I downloaded Combo directly , without using "Actualización de software". I followed all the advice from the Apple community. Can I use bluetooth speakers to solve this problem? My Computer: iMac. 20-inch, Early 2008. Processor 2.4 GHz Intel Core 2 Duo.
You may need to reset PRAM/NVRAM.
First, check that the jack is clean. Put some alcohol on a plug and insert it a few times. See if that helps.
is your output both digital and analog? If digital, is the red laser light visible in the socket? Do not look directly into the socket when checking.
If all else fails try a PRAM reset:
Reset your computer’s PRAM
A small amount of your computer’s memory, called “parameter random-access memory” or PRAM, stores certain settings in a location that Mac OS X can access quickly. The particular settings that are stored depend on your type of Mac and the types of devices connected to it. The settings include your designated startup disk, display resolution, speaker volume, and other information.
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
DO NOT HOLD These keys beyond the second startup sound!
Release the keys.
Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings. -
When in Windows 7 (while using bootcamp) I am able to see my personal files in my Mac partition. When I try to access them I am denied access, it tells me that I need permission from the administrator. How do I give myself permission to access files between the two partitions, Mac/Windows7?
When in Windows 7 (while using bootcamp) I am able to see my personal files in my Mac partition. When I try to access them I am denied access, it tells me that I need permission from the administrator. How do I give myself permission to access files between the two partitions, Mac/Windows7?
-
I purchased the elite version of Hotspot Shield VPN only to found it is a wothless scam that drags down your computer. Unfortuantley its been nothing but a nightmare to get it out of my computer. Spents over a week combing through threads on what to do and amy ahve done more damage than anything else. It would appear that restoring my computer to its factory settings is the best thing in my current situation. Ive already lost all my photos and everything else of relevance, at least I hope, I have backed up in on an external disk. Could someone please guide me through this process? i just want to be done with this horribly frustrating situation. Thank you!
Hey jollygreen666,
If you're ready to do a full restore on your computer, this is how you should go about it.
http://support.apple.com/kb/PH14243 - Erase and Install
1. Power down your computer.
2. Boot your computer holding either Command + R or Option. If you hold option you should see Macintosh HD and Recovery HD. Click on Recovery HD and press the arrow underneath to boot to recovery. If you hold Command + R you will go straight into recovery.
3. To do a clean install, in the list of utilities, click Disk Utility. In disk Utility, you will see Macintosh HD or whatever you have named your hard drive.
4. Click on Macintosh HD, and you'll see tabs along the top of disk utility. Press the Erase tab.
5. For the Format box, select Mac OS X Extended (Journaled). In the name box you can leave Macintosh HD.
6. Press Erase in the bottom right corner.
At this point you will have a blank hard drive, and you will be able to reinstall Mavericks clean without any extra data. To do so you would:
1. Exit Disk Utility.
2. In the menu, select Reinstall Mac OS X.
3. Follow the prompts to reinstall OS X, and when it asks you where you want to install it, press Macintosh HD.
This will leave you with a clean install of Mavericks.
Since you don't know how deep this software has gone, I would suggest you manually migrate your data back over from your external hard drive to prevent files from the software from showing up again.
Good luck! -
I need some advice from Apple guru's... I have a 2009 MBP that no longer meets my needs (only 4g ram and 500g HD). I have several large iphoto libraries and do lots with imovie. I need more power! I also travel some.
So... MBP or iMac????????
iMac is crazy poweful and has up to 3 TB of memory. I really hate using External Drives.... I want stuff local as much as possible. I probably have 1.5TB worth of stuff (photos and movies) since I have small kids.
rMBP has crazy power too and has up to 1TB of memory. Therefore I would need to use some EHD. But I can also travel with it.
Here is what I am thinking... am I crazy?:
Buy both.
Have iMac as the 'mothership' where I keep all my movies and photos from all years, except the current year.
Have rMBP with current year's iphoto and imovie libraries... then move those libraries to the iMac at end of every year. This will allow me to travel with it also.
Can I remote into an iMac from rMBP if I am a 1000 miles away and need something from it?
Two computers may make for confusion regarding what's on what machine.
Can you tell I am confused!!!!
Thanks!One thing you can try is calling Apple Customer Relations again at 800-767-2775, they might be more sympathetic to you this time. I would ask to be escalated to the next level and see if someone more senior can help.
I'm afraid that the problem at the root of this is the fact that you don't have Apple Care. Unfortunately, Apple respond very well indeed to those who do, but seem to to be able to do much to those outside the original warranty period.
I wish I could be more optimistic, you'll just have to charm the second lever person you speak to at Customer relations... -
Hi all, as part of my job i need to educate the end users about BW..
Hi All,
As a part of my job i need to educate the End users about the BW. So, for that purpose i need prepare on fine doucment which is easy to understand by end user community. Any documents about this will help a lot.
Could you pls send to this mail id [email protected]
Points will be awarded for this..
thanks in advacne..
Thanks & Regards,
Suresh..Hi
I dont know what everyone is sending, but there is No standard BW end user manual. Every company / project has different requirements and the queries and reports generated contain different data. Its best to use one of the templates available in WIKI. A simple document for end users should contain screenshots of the query/application and steps taken in order to access the query. If you have sharepoint or some other shared directory you can also add screencam videos training users how to use the BW system. This has always been a good way to teach end users.
Hope this helps.
Thanks -
I need advice from those of you with a MBP!!!
I currently have a Core-Duo Macbook with 2GB RAM 2.0Ghz model. I am thinking about upgrading in the next six months or so to a MBP. I do a lot of photography work, and use garageband a decent amount. I would get the 15 in. model. Which processor though? 2.2? 2.4? 2.6? I will be upgrading the RAM and Hard drive myself. Also the issue of the glossy vs. matte. After using a macbook for nearly two years, would I be disappointed with the matte? will matte be better with the photo editing? Any input will be greatly appreciated, as those who own a MBP will know the most about them!
Hi Judy:
Here's my take, from the vantage point of my new (10 days old) MBP:
I'm always bumping up against storage capacity, so I went for the 250 GB larger, but slightly slower, drive, but I have the 2.6 GHz processor. It's really a balancing act, and I had a certain dollar budget and no more, so that's how I balanced things. For most uses, I doubt I'd be able to perceive the difference between 2.2. and 2.6, or between the faster or slower hard drives.
What I CAN perceive is the difference between less RAM and more RAM, especialy if one is using Photoshop or other RAM intensive apps, so I maxed out the RAM at 4 GB (purchased from Crucial).
I haven't used Time Machine yet, but Time Machine resides on your laptop, so there's nothing to stop you from taking one you your external FW drives traveling with you and using it with Time Machine (or any other backup utility). I've also used old notebook harddrives in an OWC enclosure for a nice portable backup solution.
And the MBP comes with a DVI-VGA adapter to connect to your monitor.
Now for the fun part: accessories! I'm always financially challenged, so I just buy microfiber cloths in bulk and use a clean one with some water for my cleaning needs. And I'm also a fan of the piece of paper or card stock as a keyboard cover/screen protector when the screen is closed. That said, I'm seriously considering trying out a silicone keyboard protector (the kind you keep on as you type). My MBP is my only computer, I use it in lots of different work spaces, and I'm appalled at what I manage to get on and in my keyboard. (Without even considering the cats.)
I've never found much use for an extra battery, but I love having extra power adapters. That way, one can live in my bag, once can live in my studio, one can live by the couch . . . . etc. Having an extra--or extras--saves wear and tear on the cord and on my psyche.
And don't forget some sort of sleeve. I have a wonderful new rolling bag, with a vertical padded slot the MBP just slips into, but I use a sleeve when I carry the laptop by itself or when I want to just pop in into another bag. BuiltNY has some stylish and functional neoprene sleeves, and there are tons of sleeves from other vendors. The other advantage of a sleeve is that it helps insure that a sleeping laptop doesn't accidentally open.
It's good that you're getting AppleCare. As laptops get simultaneously smaller and more complex, the statistical odds of something failing within that three years are just higher than I care to risk. And if nothing else, AppleCare is a huge selling point if you decide to sell your machine.
This MBP is a "mature" release--refined and powerful and just a joy to use. -
I have the patience of Job. Patience doesn't help when I can't sign in to iTunes without having my authentic password rejected and
told I need to reset it. Since I have followed the advice from a community member to go to Privacy in Safari Browser and choose an
option other than Always. I have already clicked: Third Parties and Advertisers. This is because I am "allergic" to advertisers.
Please help me to resolve this issue. I need to log into itunes in order to make more efforts to delete music from my ipod.?
Many music selections are from a relative that had borrowed the ipod for the weekend. Many are in Japanese. I am thrilled
to be a community member. Thanks for listeningTo attempt a new chat session...
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
http://helpx.adobe.com/x-productkb/global/service1.html -
I have just bought a new iPad -I was downloading a new app from montessorium web site-paid for the app-was told toi needed iTunes to complete the download-so opened iTunes but nothing happened- can anyone help me??
Welcome to the Apple community.
I'm not really sure what you did, however you can only purchase apps from the App Store not from individual websites. I've taken a look at the website myself and it does direct you to the App Store, is this what happened for you. -
When syncing my iTunes to my iPad from the laptop, I get a list of missing songs; they are in the library, but not in the music folder on my HD. In particular, I uploaded 3 CDs at the same time, all are in my library, and all synced to the iPad - but the music from two of them are missing from the music folder. Questions are (a) where might they have gone? and (b) is there a way of "reverse loading" them back to my hard drive from the iPad? Thanks in advance!
Hi dones49,
It sounds like your issue here is that iTunes can not find the files for some of the songs you have brought into it. This happens occasionally even if the songs have not been moved from the location that iTunes places them on import or purchase. When you try to use the song, iTunes prompts you to find the file, as you have seen.
To find the file, use the information in this article to navigate through the iTunes media folders -
Locate and organize your iTunes files
If you are still unable to locate the files, you may need to download them from the iTunes store again, or rip them from your CDs. See this article for assistance with downloading your past purchases -
Download past purchases
Thanks for using Apple Support Communities.
Best,
Brett L
Maybe you are looking for
-
Module pool programming " to add selection-option on screen"
I want to add selection option for a field ( matnr ) on the screen in module pool programmiing. ( how it comes in report programming). If you you know how to add Please help me to solve.....
-
Signature preferences (AIR) are not saved in the fla file
Hi, - I create a new fla file in Flash CS5 Professional, - I go to publish settings and select AIR2 as the target - I click the Settings button on the right These settings are supposed to be saved with the fla file, since all of them are related to t
-
Implementing Outer join Views in creating Generic datasource
Guys, Iam bringing the Purchase document level data from R/3 into BW.I have couple of other Ztables also from which i need to collect the information.So iam going to create a generic datasource based on the view. In case of Database view it is takin
-
Restrictions for importing WSDL into PI 7.0
Hello all- We have couple of web services mediated through PI 7.0. The WSDL for these services are designed outside and we would like to import them to PI (Inside-out approach). Need help on couple of things 1.Is there any design constraints we nee
-
Does anynody know if it is possible to merge 2 data sets ?
hello, let's say we have two XMLDataSet ds1 and ds2 of the same nature (same data set path), both were loaded, is it possible to add the data of ds2 to ds1 and have the region updated? thank you.