ALL SBRS not enabled in Outgoing

Hi,
in my log i see this message for outgoing:
REJECT SG None match ALL SBRS not enabled
i think that the mail is reject because the domain is not insert in to relylist of the sender group of the listener out.
Can you confirm?
p.s.
the global messagge is:
Tue Sep 23 13:20:12 2008 Info: New SMTP ICID 141940803 interface ascout (62.77.38.45) address 79.5.15.93 reverse dns host host93-15-static.5-79-b.business.telecomitalia.it verified yes
Tue Sep 23 13:20:12 2008 Info: ICID 141940803 REJECT SG None match ALL SBRS not enabled
Tue Sep 23 13:20:12 2008 Info: ICID 141940803 close
thank all for your help.

You are correct that the connection from 79.5.15.93 (host93-15-static.5-79-b.business.telecomitalia.it) was rejected because the IP or the hostname was not on the RELAYLIST of that listener that it connected to.
In the example you provided, the listener is "ascout (62.77.38.45)". should have a relaylist at the top of the listener. You can add either the IP, IP range, hostname or partial hostname.
For example:
79.5.15.*
79.5.15.93-95
79.5.15.93
host93-15-static.5-79-b.business.telecomitalia.it
.business.telecomitalia.it
All the above will work.
Hi,
in my log i see this message for outgoing:
REJECT SG None match ALL SBRS not enabled
i think that the mail is reject because the domain is not insert in to relylist of the sender group of the listener out.
Can you confirm?
p.s.
the global messagge is:
Tue Sep 23 13:20:12 2008 Info: New SMTP ICID 141940803 interface ascout (62.77.38.45) address 79.5.15.93 reverse dns host host93-15-static.5-79-b.business.telecomitalia.it verified yes
Tue Sep 23 13:20:12 2008 Info: ICID 141940803 REJECT SG None match ALL SBRS not enabled
Tue Sep 23 13:20:12 2008 Info: ICID 141940803 close
thank all for your help.

Similar Messages

Why firefox 3.6 downloads all of the files again after restartarting the browser from a website if the "clear history when Firefox closed" is not Enabled?

We have a corporate website, we officially support FF3, FF4, IE8 and IE9. Our web site is quite big, so we really need browser caching, first time page load is around 15 seconds. With files in the cache getting new page is less than a second.
Everything works perfect except with FF3. With FF4, IE8, IE9 if we are on the website, clicking everywhere is fast, the page is in the cache. If we restart the browser, it is still fast, it loads files from the cache.
But with FF3 we have a problem. Every time we restart the browser, it is loading the files again from the server, instead of using the local cache (checked with Firebug). I can reproduce the problem anytime, it is the same with every FF3 instances. I double checked, the "clear history when Firefox closed" option is not enabled.
Could you advise please how to use the local cache either after browser restart?
Thank you!
Chris

Just read that the default memory storage on FF is set to 5 mbs. You can up that by clicking on tools, advanced and overriding the default and set it to 50 mbs (if you use lots of tabs) or 10 mbs (if you use just a few).
I open a blank tab and clear the cache periodically, while I am working. I can have several tabs open and watch videos on Youtube, by doing this. Have you cleared your cache?
Since I have an older computer, I've also used CCleaner for years. I use it often, but always before signing off. You can get it free...search for CCleaner, download from Pirifoam free. I didn't change any of the settings and it clears crap left behind from uninstalling programs, clears all browsers at once of: cookies, history, passwords, etc. I love it!
I had freezing, before using the "open blank tab, clear the cache" thing. Now I have no problems. Plus, as I said...you can change the default memory usage for FF and that should help too.
Hope this helps! Good luck! :)

Fire Fox no longer applies my UN and PW when I open a site. The function is not enabled. All PS are still showing in tools, options.

I have several site that have User names and Pass Words assigned and saved in tools, options. Fire Fox no longer applies these when I open the site. When I look at tools, options the "Remember passwords for sites" is not enabled. How do I re enable this function.
This happened after a bout with some malware from a program called Torch.

Do you see this Torch program in the Windows Control Panel or are there other programs that were installed recently?
*Control Panel > Programs > Programs and Features > Uninstall or change a program
*Click the Installed column to sort by this heading
Do a malware check with several malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
Your System Details List shows that you have a user.js file in the profile folder to initialize prefs each time Firefox starts.
The user.js file is only present if you or other software has created this file and normally it wouldn't be there.
You can check its content with a plain text editor (right-click: Open with) if you didn't create this file yourself.
The user.js file is read each time Firefox is started and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
See also:
*http://kb.mozillazine.org/Preferences_not_saved

Httpd.conf, php.ini, php5.conf all OK and php still not enabled

I edited httpd.conf to uncomment the line for the php module, I verified that php5 and the right info for the .php and .phps and php is still not enabled on this Mac OS 10.6.6. What else do I need to have php.

sudo apachectl graceful
This will restart the apache server.
server.example.com/~username/info.php would be the website you're looking for.
Note the tilde before the username.
If you've uncommented the php5 line in the conf file, then it should work.
Perhaps do a search for "php5" in the conf file, and make sure that you got all of them. It seems to me that there might be two lines that you need to uncomment.
HTH
-Graham

Website says cookies not enabled. Followed all FAQ suggestions to no avail.

Checked the cookies settings.
Cleared the history for the site.
Cleared all cookies and the cache.
Site still says cookies are not enabled.

That link is the one I used as described in my original post, but thanks for the effort.

All share functions except email are NOT enabled. I can create and print but order prints is also not working. HELP!

All share functions except email are NOT enabled. I can create and print but order prints is also not working. HELP!

Hello
Please see notes and 4 attachments for your reference. Hopefully this information helps.
Maureen
what version of iPhoto are you using? 9.5.1
what system version are you running? OSX 10.9.4
what happens when you try to order? See attached picture. I want to share pics to FB & FLICKR etc
did you make sure you've selected the correct Print Products store in iPhoto's Advanced preference pane? YES
what fixes have you tried? Restarted computer. I'm not very computer savy. I have had no problems with this in the past.
where is your library located? I have not moved anything for iphoto.
did you apply any updates or upgrades just prior to the problem occurring? I can't remember
are you running a "managed" or "referenced" library? Not sure how to find this out
what type of Mac? iMac 2.5 GHz Intel Core i5
how much free space on your boot drive? 12 GB 1333 MHz DDR3 - I have an external hard drive 1 TB

The App store, FaceTime, iTunes, Safari and Camera are all missing from my iPad. Restrictions are not enabled and when they are those applications are grayed out. I have tried everything but restoring my iPad to its orginal condition. What do I do?

The App store, FaceTime, iTunes, Safari and Camera are all missing from my iPad. Restrictions are not enabled and when they are those applications are grayed out. I have tried everything but restoring my iPad to its orginal condition. What do I do?

todaywillbegreat wrote:
''' I have tried everything but restoring my iPad to its orginal condition. What do I do?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

When i try to log into facebook all it says is "Cookies are not enabled on your browser" but i have enabled them. how do i log in?

When I try to log into facebook all it says is "Cookies are not enabled on your browser" but i have enabled them. How do I log in?

My guess is it's either a corrupt cookie or you have some add-on blocking cookies.
We'll need some more info about your Firefox setup. Go to '''Help > Troubleshooting Information''' then click '''Copy all to Clipboard'''. Open a reply to this post, and go to '''Edit > Paste''' to paste the info from your Troubleshooting Information page.

After copy, paste is not enabled in edit menu selection. Started all of a sudden.

I've been moving many files that somehow were inadvertantly moved to the wrong folder. I copied quite a few, then one day after I copied a file, (and later verified it was on the clipboard), when I selected the location to copy to, the right click or edit menu options either did not have the paste option, or it was not enabled (faded). What could cause this feature to go away? I wish I could CUT and paste instead. If I try to slide a file to a new location, it becomes an alias and I can't delete the original file. I verified the disk and repaired disk permissions. Any other suggestions?

Hi Mennax5!
I have an article for you that can help you troubleshoot the issue you are seeing with iMessages:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

I have tried all the steps you listed in your FAQ sextion on enabling and disabling cookies but I am still getting the error message "cookies not enabled" on certain websites. Now what do I do?

I have tried every step you have listed in your FAQ section for enabling and disabling cookies but I am still getting error messages "cookies not enabled" on certain websites? Why is this and what do I need to do to fix this?

I have STILL NOT received an answer to my question as of this date. I am VERY disappointed in Firefox support.

Mail does not use correct outgoing server

Problem
Mail in Mavericks (and also IOS6 snf 7) does not use the outgoing smtp server associated with the account being used. This results in either a failure to send or mail being put into the wrong "Sent" folder.
Background
I have most of my non-icloud mail pulled down to a home server from which my laptops and ios devices access various accounts using imap. The local home server also provides smtp and relays all mail to my ISP. Recently I have been switching from an old home server (Mac Mini) to a new one (Raspberry pi running the debian Raspbian version with fetchmail, Dovecot and postfix setup).
While making the changeover I had access to both the old server and the new server enabled on my laptop. Naturally the majority of the settings (Name, email address etc) were the same although the name and address of the server to be used for both incoming and outgoing mail were different. This seemed tp work fine for incoming. However when I tested outgoing mail the copy that should appear in the "sentt" box went missing. This usually indicates some mistake in the setting of the sent mail folder on the accounts but this all checked out.
I eventually found the missing outgoing mail intended to go through the new server in the sent box on the old server. Further trials showed that no matter what I did the outgoing would always default to the old (and therefore first set up) outgoing server.
Deleting the old account and the old outgoing server of course should cure the problem and will eventually be the solution for me when I kill the old server. But i wanted to get to the bottom of the problem in case it reappeared in other contexts. Checking the "use only this server" box produced failure to send rather than the correct result.
Trialing various alterntaive settings showed that the problem occurs when there are two outgoing servers with the email address in the settings and the user name on the outgoing server name being the same. I had assumed that changing the description field would distinguish between the various settings; however this did not work. Changing the Name Field did work eg by putting (O) after my name.
It appears therefore that mail selects the outgoing server on the basis of email address (with the full name included) and user name (trrespective of the actual server or the Description that shows in the smtp server listing. In some ways this is logical but it produces problems in the context I have described and would also be a difficulty if you wanted to use an alternative server when in a different location.
I have trawled support and elsewhere for any thing similar. Lots of mail problems (don't get me started on the way icloud loses outgoing each time you edit the list!) but I have not found any posts on precisiely this point.
IOS devices seem to have similar problems, but a quick attempt at a similar solution does not work, and I cannot be bothered to test the options. I will simply clean them out and put in the new accounts.
Advice
Grateful for any comments or advice from people who have encountered similar problems and whether my diagnosis if correct. Have I missed any obvious corrections that would clear this up. I do not know whether this is a Mavericks issue or also appears in earlier OSX versions.
CPE

Peter,
Where ever the Sent and Trash folders show in the Sidebar, highlight first one, and then the other, followed by clicking on Mailbox in the Menubar, and choosing Use This Mailbox For, and choose the function.
Keep us posted on your progress.
Ernie

BitLocker not Enabled on HP ElitePad 1000 G2

I have an HP ElitePad 1000 G2 that I am using MDT to apply our 8.1 x64 Update image. This task sequence works fine on all other systems on which it has run. On the ElitePad, when the task sequence completes, BitLocker is not enabled.
Running manage-bde-status returns:
Disk volumes that can be protected with
BitLocker Drive Encryption:
Volume C: [OSDisk]
[OS Volume]
 Size: 115.58 GB
 BitLocker Version: 2.0
 Conversion Status: Used Space Only Encrypted
 Percentage Encrypted: 100.0%
 Encryption Method: AES 128
 Protection Status: Protection Off
 Lock Status: Unlocked
 Identification Field: Unknown
 Key Protectors:
 TPM
If I look in the BitLocker applet on the control panel, it says "OSDisk (C:) BitLocker is waiting for activation"
the ZTIBDE.log just stops at:
Attempting to intiate ProtectKeyWithNumericalP@ssword
<Message containing password has been suppressed>
A successful system shows:
Attempting to intiate ProtectKeyWithNumericalP@ssword
Success protecting Key with numerical p@ssword
If I click Turn on BitLocker in the control panel applet or run the following commands:
manage-bde -protectors -add c: -recoverypassword
manage-bde -on c: -recoverypassword
The recovery key protector is created and uploaded to AD and BitLocker shows as enabled.
Any ideas to why this is happening?

after some more investigation, I found the following article
http://netecm.netree.ch/blog/Lists/Posts/Post.aspx?ID=80 and adding the registry key referenced in the article fixed the issue.

Drill by is not enabled in BO 4.0 WebI report

Hi,
In one of my report I have to do Drill by. But when I right click on the dimension I am able to see only Drill Down that is enabled.
Drill by is not enabled. Please let me know how to enable Drill By in BO 4.0 WebI report.
Thanks in advance
Lavanya

Hai
Enable drill mode right in BOE 4.0
http://www.sdn.sap.com/irj/scn/web-intelligence40-elearning-all
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d0e40af9-0d6a-2e10-b58a-c4ecde511a6e
Thank u

Firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result.

firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result. Why do I have no sound. Computer plays I-tunes and all other sounds, just no web browser sounds.

Glad you seem to have sorted things out.
The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems.

Remote Desktop Connection - cannot proceed because authentication is not enabled

Hello,
I try to connect via RDP from a Windows Server 2008 R2 to another 2008 R2 Server.
I always get the error message.
The connection cannot proceed because authentication is not enabled and the remote computer requires than authentication be enabled to connect.
On the target machine the Remote Settings are set to:
Allow connections from computers running any version of Remote Desktop.
Firewall is disabled on both servers.
Therefor I do not understand why I get an error message, that authentication is required.
The target box is a nearly fresh syspreped machine with all current Hotfixes installed.
I already found a lot of people having that problem by using XP (old RDP client), but no one seems to have this problem when connecting from 2008 R2 to 2008 R2.
Thank you very much in advance for every hint.
BR
Matthias

Hi Matthias,
First I would like to confirm if you have deployed RDS (Remote Desktop Services) and you got the error, if so, please check this option
TS Configuration, >> RDP-Tcp Properties >> change the Security Layer to "Negotiate"
Then Recycle the TS Gateway service.
Refer to:
Unable to connect to Server using the Remote Web Workplace (RWW) Small Business Server 2008
If this issue has nothing to do with RDS, and I suppose you used the cmd "mstsc" to remote access. This issue may also occur because of the version of mstsc, please make sure it has been upgraded to the new version.
In addition, Did you have another newer server available like Server 2012? So we can test and try to use Server 2012 to remote access Server 2008 R2, and check if the issue persists.
If there is anything else regarding this issue, please feel free to post back.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support

ALL SBRS not enabled in Outgoing

Similar Messages

Maybe you are looking for