All SCOM 2012 R2 dashboards are blank on Windows 7 for any user

All SCOM dashboards are showing up completely blank on several (but not all) Windows 7 machines and a 2008 R2 server (with RDS)...for any type of user. It's not a permissions issue as the same user can RDP to the SCOM Mgt server and view the dashboards just
fine. It seems to be some underying pre-requisite that isn't there, or isn't working. We've installed the pre-reqs (reportviewer, SQLSsyClrtypes, etc) to no avail. I've also tried doing a "repair" on .Net, and rebooted as described in another thread,
but that didn't work. I'm guessing it's something baked into our desktop images, but what am I missing

...also, we're seeing this event in the application log when the console is opened on an affected machine (but, not necessarily when opening the dashboard)...so, not sure it's 100% relevant.
Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information. : System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for
more information.
   at System.Reflection.RuntimeModule.GetTypes(RuntimeModule module)
   at System.Reflection.RuntimeModule.GetTypes()
   at System.Reflection.Assembly.GetTypes()
   at Microsoft.EnterpriseManagement.Presentation.DeclaredAssemblyLoader.LoadModuleCatalogFromAssembly(IModuleCatalog bootstrapperCatalog, ModuleCatalog catalog, Assembly assembly)
   at Microsoft.EnterpriseManagement.Presentation.DeclaredAssemblyLoader.CreateModuleCatalog(IEnumerable`1 assemblies)
   at Microsoft.EnterpriseManagement.Presentation.DeclaredAssemblyLoader.LoadInternal(IEnumerable`1 assemblies)
   at Microsoft.EnterpriseManagement.Presentation.DeclaredAssemblyLoader.Load(DeclaredAssembly assembly)
   at Microsoft.EnterpriseManagement.Monitoring.Components.ComponentRegistry.<>c__DisplayClass3e.<GetAssemblies>b__3c(DeclaredAssembly declaredAssembly)
   at System.Reactive.Linq.Observable.<>c__DisplayClass413`2.<>c__DisplayClass415.<Select>b__412(TSource x)

Similar Messages

Suddenly all my albums in Photos are blank. The photos are still in the camera roll but not in the albums. What happened and how do I recover them all? Are they in my icloud? Also the photos are clear as thumprints but when I touch it to zoom are blur

Suddenly all my albums in Photos are blank. The photos are still in the camera roll but not in the albums. What happened and how do I recover them all? Are they in my icloud? Also the photos are clear as thumprints but when I touch it to zoom are blurry. what gives? They were all completely clear and in the albums when I last used my ipad?? Would doing the "Reset" under General settings do that? When I returned from Europe I reset my ipad to get it in the right time zone etc.

Reboot. Press and hold the home and sleep buttons until the apple logo appears. Ignore the red slider.

When I open the Page Thumbnails panel, all the document's thumbnails are blank. How do I restore the ability to see page material in Page Thumbnails?

When I open the Page Thumbnails panel, all the document's thumbnails are blank. How do I restore the ability to see page material in Page Thumbnails?

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Notifications are not being generated for any emails that have rules applied to them.

Notifications are not being generated for any emails that have rules applied to them. Any clues how to fix this?

In System Center 2012 Operations Manager, the alert notification will be sent when the alert first meets all criteria, regardless of resolution state, unless resolution state itself is a criterion. If alert suppression is enabled for the rule or monitor
that raises an alert, only one notification will be sent when the subscription criteria are first met. No additional notifications will be sent until the alert is closed and a new alert is raised that meets all subscription criteria. PLease check
1) whether your rule has trun on alert supression
2) Close the alert, craised by rule, and do it again
Roger

I have Acrobat Pro 9.0. Am happy with it since I only have occasional need. Haven't updated it. Is there a way to do this? Do I need toy go through updates sequentially if they are available? Thanks for any help.

I have Acrobat Pro 9.0. Am happy with it since I only have occasional need. Haven't updated it. Is there a way to do this? Do I need to
go through updates sequentially if they are available? Thanks for any help.

Hi Spiral Geronimo,
It is always recommended to update the software to its latest updates. I would suggest you to update your Acrobat 9 to its latest updates. You can download the updates from the link below:
http://helpx.adobe.com/acrobat/kb/update-patch-acrobat-reader-7.html

IPhone contacts, Country field, keeps Syncmyride Navigation from giving directions. Is there a way to leave Country field blank? Thanks for any help. JW

iPhone contacts, Country field, keeps Syncmyride Navigation from giving directions. Is there a way to leave Country field blank? Thanks for any help. Jww

Syncmyride. That's what's having the problem. If it were handing the data properly, it wouldn't be a problem. You should not have to remove data from your contacts in order for an app that is accessing the contact data to work correctly. This is a bug in syncmyride. It has nothing to do with iCloud or anything else that Apple controls.

We are not getting email for any of the two new profiles in Production environment

We are not getting email for any of the two new profiles.
The new rules for sending e-mail work when using the initial profile.
Only works for F9 and choose manually the profile is being sent.
But siebel writes the log of both the \ BIN \ sent as if it had sent.
operation:
Standards (Policies) were created in the Activities (S_EVT_ACT) and Contacts table (S_CONTACT). When Standards (Policies) are reached trigger actions (Actions). These actions are linked to sending emails.

The SMTP Adapter don't just "through away" messages. If your Tracked Service Instances shows that a message was sent through the Port, I am pretty sure that a mail was indeed sent.
-Are you using Static- or Dynamic Port?
Can you try to set the Send Port in "Stopped" state, and then send a message to it. Examine the message suspended in BizTalk, and if everything looks ok, then start the Port again and check that the message has disappeared from both suspended and running
instances in the Group Hub.
If so, quickly check the mail box, make sure that no spam-filters etc. are messing up your test.
Morten la Cour

SCOM 2012 Install: Second MS blank drop down on DB name

I sucessfully configured my SCOM 2012 enviroment but when trying to add a second MS I get a blank drop down in the database name under "configure the operational database". I can connect succesfully to the sql server and instance in the install wizard
as well as creating a test ODBC connection to the Operations Manager DB. The SQL server 2008 has been installed with the collation of SQL_Latin1_General_CP1_CI_AS and all the prereq checks pass.

Never mind I fixed it. A scom agent was installed on the server and was removed but was not deleted from SCOM
console.

SCOM 2012 SP1 Can't get email alerts for Heartbeat Failure or Computer Unreachable when combined with Group.

Hello,
I have SCOM 2012 SP1 RTM POC lab. I have created a dynamic group that picks up my system center servers based on some simple criteria and this works fine.
I have set up a subscription for critical and high severity alerts originating from this dynamic group called SCOM Servers to send emails to a distribution. This also worked well for any critical alert that was NOT Heartbeat Failure or Computer Unreachable.
I see those in the console but no email.
So I set up a new subscription by right clicking on the alerts and here's the kicker. If add no other conditions to these subscriptions, they will send emails to the DL I provided, but if add the condition initiating from group, and specify my dynamic
group SCOM servers, no email alert. But the alert still appears in the console.
Any ideas on this? I would like the appropriate support groups to get these types of alerts for the servers that they support (i.e. SCOM will get SCOM servers, Exchange Admin will get Exchange and never the two roads shall meet.).
I even tried some internet posted custom management pack, but I couldn't import it after adding the code that he listed.
I mean, isn't this a basic requirement for any mid-sized company?
Any help is greatly appreciated.

Hi Donald,
Like Dan says you need to add the "Health Service Watcher" objects to the groups as wel. Unfortunately this cannot be done in the Dynamic group Editor but has to be done in the XML. Export the XML and add the following piece of code between the
lines </MembershipRule></MembershipRules>:
<MembershipRule>
<MonitoringClass>$MPElement[Name="SystemCenter!Microsoft.SystemCenter.HealthServiceWatcher"]$</MonitoringClass>
<RelationshipClass>$MPElement[Name="MicrosoftSystemCenterInstanceGroupLibrary7084300!Microsoft.SystemCenter.InstanceGroupContainsEntities"]$</RelationshipClass>
<Expression>
<Contains>
<MonitoringClass>$MPElement[Name="SystemCenter!Microsoft.SystemCenter.HealthService"]$</MonitoringClass>
      <Expression>
<Contained>
<MonitoringClass>$MPElement[Name="MicrosoftWindowsLibrary7084300!Microsoft.Windows.Computer"]$</MonitoringClass>
          <Expression>
            <Contained>
              <MonitoringClass>$Target/Id$</MonitoringClass>
            </Contained>
          </Expression>
        </Contained>
      </Expression>
    </Contains>
</Expression>
</MembershipRule>
Save the XML delete the old one in OpsMgr and import the edited.
For SP1 the SystemLibrary version is 7.0.8430.0. If this is not your version you need to edit this in the code above.
Hope this helps,
Regards Marthijn van Rheenen
Blog: Heading To The Clouds

Blank help window for itunes

I updated itunes to 7.01 on imac. Now the help window for itunes is blank. Help windows in other applications are fine

I, too, just installed iTunes update to 7.0.1 and there is no iTunes help. It can be selected from the drop-down menu at the top of the Help Viewer window, and the iTunes categories are there, but selecting a category gives me an error message with suggestions on how to enter search words!
When the most simple functions such as this fail to work I am just beyond words.

Asking authentication window for annonymous users enable bi site when view dashboards or (deploy dashboards to view by anonymous users in sharepoint 2013 )

Hi
in sharepoint 2013 i created bi center site
1) and i followed best practices from Technet for how to create Secure store service,performance Point service applications
2) and added Unattended service account permissions in SSAS data sources,
3) given db_owner permissions for performance point service application pool account in content database.
4) and my requirement is that deployed dashboards and pointers can be viewable by any users , who without login to
sharepoint web application,
so i enable anonymous access for whole web application and bi site.
but even when i open bi dashboards without login by view permission user, it asking authentication window.
i open dashboard designer and deployed using spfarm user in sharepoint webfront end server.
adil

PerformancePoint generally does not support Anonymous access, as is the case when using Excel Services data connections:
https://technet.microsoft.com/en-us/library/ff191193.aspx
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

All facebook walls/info pages are BLANK...

using http://facebook.com/home.php (the actual site - not the app or the mobile version)
i used to be able to view the contents of my walls & other people's/groups/etc as well.
now, it is completely blank.
i know i can use the mobile version to view & post on walls, however, i am not able to post links correctly.
normally, i would not be one to complain about facebook changes, but is is one of my jobs to be able to post links on various walls.
please help...? :-)
Post relates to: Pre p100eww (Sprint)

btw, my problem started about a week ago
before the webos 1.4 update & possibly after facebook's last update (about eliminating boxes...?)
- sounds like a facebook issue like that - can't post on facebook forums due to my issue... :-(

Scom 2012 r2 DFS management packs mp windows 2008 r2 servers

Hello,
I'm having an issue in getting the 2008 r2 DFS namespaces servers to show up after installing the "Windows Server File & iSCSI Services 2012" and "Windows Server File & iSCSI Services 2012 R2". The attached mp
documentation says to "Remove all existing DFS namespaces packs prior to installing the new dfs namespaces pack". However, the 2012 mp doesn't seem to include 2008 mp.
Does anyone have a guide or can clarify the install/upgrade instructions?
Thanks.

Regarding to
DFS MP Guide, this management pack contain both for windows 2008\2012
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

SCOM 2012 - Dynamic Group based on a windows service

So here is the situation, I have 12 servers with a windows service called acidicalien. What i'd like to do is dynamically group all the servers running this service together. I kind of worked out I need a group and I need to define the dynamic
criteria, but I can't seem to find which elements I need to select to get the group to dynamically include servers with just that service.

Raju - I am trying to accomplish the same with this statement. Can someone help me with the right syntax or documentation. Microsoft does has very poor documentation on how to use Dynamic Groups in SCOM.
( ( Object is Windows Computer AND True ) ( Object is Windows Service AND ( Service Name
Equals SnapDrive ) AND ( ( Service Name
Equals SWSvc ) OR False ) ) OR False )

Still cannot cut and paste - all instructions are way too technical for avg user trying to fix the problem. Need step by step instructions.

Firefox is not enabling me to cut and paste when I'm working on my business website. I can tried the key commands and they didn't work either. The instructions that were linked for Changing the preferences in Firefox were very complicated and even when I thought I found the correct place to add the user_pref lines to allow clipboard, the message was DO NOT MODIFY THIS PAGE.
I didn't want to add or change anything for fear of screwing this up.
What I need are step by step instructions. Really baby steps. How to find the profile and the js.file, what is text editor? If you could take instruct from start to finish that would be great.
Thank You!

Use the keyboard shortcuts if the buttons on the web page or other methods aren't working.
* Copy: Ctrl+C or Ctrl+Insert (Mac: Command + C)
* Paste: Ctrl+V or Shift+Insert (Mac: Command + V)
* Cut: Ctrl+X or Shift+Delete (Mac: Command + X)

All SCOM 2012 R2 dashboards are blank on Windows 7 for any user

Similar Messages

Maybe you are looking for