All SSIDs are not broadcasting...

I have a  serious issue with my Cisco 4404 WLC. In from WLC, only some SSIDs are broadcasting the others are not broadcasting.... If I make a new WLAN and select it as broadcasting, but its not broadcasting correctly. I cannot see this in my device. What can be reason? Is there any restriction to the number of broadcasting SSIDs.

That's too many SSID's.... 3-4 is max I would go.  What I would do is make sure your not using AP Groups and if you are, then make sure all the WLANS are in the ap group.  WLAN ID 1-16 will be the only SSID's that are broadcasted on the AP, and WLAN 17 and up will not be and you will need to use ap groups for that.  If this is all fine, then delete the ssid that is the issue and recreate it.  You might have too many beacons in the air causing the clients not to see certain ones.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Similar Messages

  • Commit events are not broadcast because no JMS Transport is available.

    Just set up a new WebLogic 10.3.2 domain and I am seeing this while starting the Admin Server:
    <Mar 1, 2010 6:37:03 PM CST> <Error> <Security> <BEA-000000> <Commit events are not broadcast because no JMS Transport is available. Remote L2 caches will be out of sync.>
    anyone have any idea what this is and what's causing it?

    Hi,
    I followed the instructions given under " Configure the RDBMS security store " ( Step 6 ) and restarted my Server. :-
    +6. In the section labeled Server Synchronization Configuration, specify the appropriate settings for JNDI and JMS so that the RDBMS security store can cache database information in memory correctly. If the RDBMS is running in more than one JVM -- for example, the domain has multiple servers, or other Oracle products are sharing the same RDBMS store with the new domain -- these caches must be synchronized to ensure the integrity of the security data.+
    To configure server synchronization:
    +1. Specify a JNDI user name and password. This can be any valid user in the security realm who has access to JNDI.+
    +2. Create a JMS topic. You may reuse an existing one, if desired. For information, see Configure topics.+
    Caution: Failure to configure JMS notifications in a multiserver domain in which the RDBMS security store is configured may result in a security vulnerability.
    +7. Click Save.+
    +8. To activate these changes, in the Change Center of the Administration Console, click Activate Changes.+
    Not all changes take effect immediately—some require a restart (see Use the Change Center).
    However, I still see the same error :-
    *+<Error> <Security> <BEA-000000> <Commit events are not broadcast because no JMS Transport is available. Remote L2 caches will be out of sync.>+*
    Am I missing something ?
    Thanks,
    Sandeep Seshan

  • Portal Example Server problem: Commit events are not broadcast no JMS

    Hi experts!
    I've installed the Oracle WebLogic Portal 10gR3 (10.3.2) on the Windows XP machine:
    http://www.oracle.com/technetwork/middleware/weblogic-portal/downloads/index-092352.html
    I followed by http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/samples/dvt-sample.html
    - installed the Portal Examples
    - Start > All Programs > Oracle Products > WebLogic Portal > Examples > Start Example Server.
    but my server was staying in RUNNING mode and threw errors....
    <Errors> <Security> <BEA-000000> <Commit events are not broadcast because no JMS Transport is available. Remote L2 caches will be out of sync.>
    What should I do?
    Edited by: Averyanov on Oct 1, 2010 5:40 AM
    Edited by: Averyanov on Oct 1, 2010 5:40 AM
    Edited by: Averyanov on Oct 1, 2010 5:44 AM

    Hi,
    I followed the instructions given under " Configure the RDBMS security store " ( Step 6 ) and restarted my Server. :-
    +6. In the section labeled Server Synchronization Configuration, specify the appropriate settings for JNDI and JMS so that the RDBMS security store can cache database information in memory correctly. If the RDBMS is running in more than one JVM -- for example, the domain has multiple servers, or other Oracle products are sharing the same RDBMS store with the new domain -- these caches must be synchronized to ensure the integrity of the security data.+
    To configure server synchronization:
    +1. Specify a JNDI user name and password. This can be any valid user in the security realm who has access to JNDI.+
    +2. Create a JMS topic. You may reuse an existing one, if desired. For information, see Configure topics.+
    Caution: Failure to configure JMS notifications in a multiserver domain in which the RDBMS security store is configured may result in a security vulnerability.
    +7. Click Save.+
    +8. To activate these changes, in the Change Center of the Administration Console, click Activate Changes.+
    Not all changes take effect immediately—some require a restart (see Use the Change Center).
    However, I still see the same error :-
    *+<Error> <Security> <BEA-000000> <Commit events are not broadcast because no JMS Transport is available. Remote L2 caches will be out of sync.>+*
    Am I missing something ?
    Thanks,
    Sandeep Seshan

  • ORA-01008 All variables are not bound

    Hi I am running this query and getting this exception ORA-01008 All variables are not bound .
    Could anyone please insight ?
    SELECT EQMT_INGT_LOG_ID, EQMT_ID,
    XMLSerialize(DOCUMENT XMLType(ingLog.BUCK_SLIP_XML) AS CLOB) BUCK_SLIP_XML
    FROM TOS_EQMT_INGT_LOG ingLog
    where BUCK_SLIP_XML is not null and ingt_date between to_date(:fromDate, 'MM/DD/YYYY HH24:MI')
    and to_date(:toDate,'MM/DD/YYYY HH24:MI' )
    and eqmt_id in (select eqmt_id from tos_eqmt
    where eqmt_init = :eqmtInit and eqmt_nbr = :eqmtNbr
    and orig_loca_id in (select loca_id from tos_loca where altn_src_sys_stn_id = :circ7 ))
    and SCAC = :scac
    and STCC = :stcc
    and SHPR_NAME = :shprName
    and CNSE_NAME = :cnseName
    and driv_id in (select driv_id from tos_driv where lcns = :lcns )
    and driv_id in (select driv_id from tos_driv where sabv = :sabv )
    and ingt_stat_ind = :ingtStatInd
    and BUCK_SLIP_XML like :inspectedBy
    ORDER BY INGT_DATE

    Slightly off-topic but what do you think this does :
    XMLSerialize(DOCUMENT XMLType(ingLog.BUCK_SLIP_XML) AS CLOB) BUCK_SLIP_XML?

  • All fields are not mapped in transformation 0IC_C03 to 2LIS_03_BF_TR

    I have replicated BI7 data sources of 2lis_03_BF,BX & UM from ECC. All the infosources are BI7 infosources.After installing the BI Content for 0IC_C03, infosource 2LIS_03_BF_TR is not active.When I am trying to activate the transformation it is showing a error in START ROUTINE & also all fields are not mapped.
    Please suggest a solution.
    Thanx in advance.
    Edited by: Aritra on Nov 28, 2011 11:37 AM

    Hi,
    i think you have done some modification manually(either added something and deleted something in transformation) thats why code isn't maching with standard sorce package.
    so to resolve this error just remove  changes you manually did. or remove that code and again create start routine and paste the code which u need.
    Thanks & Regards,
    NIKHIL

  • After upgraded 9.2 DB, all users are not able to login (Except Guest).

    After completed the DB upgrade from 8.1.7.4 to 9.2.0, all users are not able to login the oraclemypage.home. This is except the Guest account.For example, I use the sysadmin account to login the oraclemypage.home. It shows "Your login is invalid. Please login again."
    Moreover, I do the following query.
    SQL> select fnd_web_sec.validate_login('SYSADMIN','SYSADMIN') from
    dual;
    FND_WEB_SEC.VALIDATE_LOGIN('SYSADMIN','SYSADMIN')
    N
    If I guery the Guest account, the result is "Y".
    Also, all users can access via dev60cgi/f60cgi to open E-business 11.5.7 application. Are there any missing script / process I need to do?
    Thanks,
    Matthew

    Hi Arun,
    What message u get on the apache logs / jserv logs when u get the error ?
    Since the log cumulate a giga byte, I clean up the log and test again. It seems no error message.Whats your platform?
    HP-UX 11.11To which version (5 digit) u upgraded DB ?
    Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
    I found a note 225074.1 that talks of a similar issue where users are ablt to login to forms but not php. this is for AIX. review the note.
    I had checked this previously. Part of this document already tried which suggested by Oracle Support.what is the end_date for all of these users in fnd_user table ? if all users for some reason is end_dated , then fnd_web_sec will show 'N"
    All users are normal. For those I tested without end_dated, I can access via f60cgi too.whats the session_cookie_domain set to in icx_parameters table? Set to NULL and try bouncing apache once.
    This set to ".mycompany.com". You mean that I set the session_cookie_domain to NULL and restart Apache, right? Why I need to set it NULL?

  • Ipad with ios5 shows only 1000 emails. Would like to see all that are not deleted.

    pad with ios5 shows only 1000 emails. Would like to see all that are not deleted. iCloud turned off for Mail. Using Outlook on MacBook.

    Just a historical note of interest, Yahoo Mail was one of the first IMAP Push providers on the original iphone, so they did at one time support IMAP. My guess is you will have to get the server settings from tech support, which you are paying for.
    But the gmail app is called gmail :-) and the technology that allows you to link it to a domain is known as google apps. (www.google.com/apps).
    But I would call Yahoo tech support and ask them what the proper way to set it up on an ipad or iphone is.
    If you built your website using Yahoo tools (ie. their website builder), you may find it difficult to move.
    The appropriate place to discuss moving web hosts is here. www.webhostingtalk.com
    Site5 was able to migrate my clients' sites for free from a non-Yahoo host, although if you do want e-mail make sure you specify that in the notes field. (MX)
    www.site5.com
    --Sam

  • I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?

    I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?
    Why apple also doing such kind of softwares? Cant they do testing before releasing the product?
    Could any one help me out of this?
    Thanks,
    Rajesh

    See this discussion...
    https://discussions.apple.com/message/23731048#23731048

  • I forgot restrection passcode. Pleas help me   . Without code all seting are not active. Iphone 4  .  Ios 6.1   . Few days ago update.

    I forgot restrection passcode. Pleas help me   . Without code all seting are not active. Iphone 4  .  Ios 6.1   . Few days ago update.  Pleas help

    A good read. Have you done anything at all to resolve your problem. Reset? Restore?
    By the way - "your products"... nobody here produced the iPhone, we are all just users. Apple is not here.

  • All applications are not responding when wake from sleep.

    All applications are not responding when Macbook pro wake from sleep,
    the keyboard and touch pad are okay.
    Why?
    Thanks a lot.

    I want to see if there's a service that may be preventing it from working properly when waking from sleep. To test this, we'll need to Disable all non-system-critical services to see if the issue occurs.
    If it does not, that means one of those services that was disabled, is causing the issue.
    If the touchscreen is still unresponsive after sleep with all of those non-critical services disabled, then it may be something with the registry or the hardware. 
    Here are the steps to disable non-critical services:
    Windows + Q to bring up Search
    Type 'msconfig' and press Enter
    Click the Services Tab
    Check the Hide All Microsoft Services box 
    Click the Disable All button 
    Click Apply and Restart
    Once it restarts let it go into sleep mode and then wake it back up from sleep mode and test the touchscreen. Do this a couple of times, if you have time. (When you're done troubleshooting, you'll have to go back into msconfig and re-enable all of those non-critical services, apply and restart.)
    Let me know the results when you get a chance, please

  • IPhone 4G will not connect to router when SSID is not broadcasting

    I was able to setup my WiFi connection for the iPhone using WPA2 Security and MAC address filtering. But when I disable SSID Broadcasting on my router, the iPhone does not see the network. If I broadcast the SSID on the router then the iPhone will connect automatically.
    I have an iPad that automatically connects to the network when the SSID is not being broadcasted on the router. Why can't the iPhone connect to a saved network that is not being broadcasted? Every other device including the iPad can connect to the router when the SSID Broadcast is disabled.

    Oridnarily, any equipment should not see the network when SSID disabled, since the router is not broadcasting its SSID. So you have you to connect to it manually if and only if you know the SSID (part of little added security) and the password.
    However, when you connect that SSID becomes visible (if someone is sniffing) since the client (your phone) has broadcasted the SSID. Only a dedicated network sniffer can see the network without SSID (it will look like NULL string) but obviosuly cannot connect without SSID and password.
    I have similar setup with LINKSYS WRT160N and there is no need to reboot the router. I noticed that when the Iphone goes to sleep it forgets the network and I have to enter everything all over again. However, this is not the case on my other WM phone. My Nintendo WII will remember it as long as it is not switched off, then I will have to enter the credentials all over again.
    The fact that it connected with previous router, suggest to me that the router was still broadcasting where it should not. Thats is the whole idea of disbaling SSID, not to let other others see your network (except sniffers). If they do, it will be with no name.
    Message was edited by: jamalaya
    Message was edited by: jamalaya

  • All Cells are Not getting Background Color in WAD

    Hello All,
    I have a query with 29 Columns and Nearly 1000 Rows.
    This query is being displayed through WAD.
    I have used  com.sap.ip.bi.rig.Format to color different columns : e.g.
    1st - 8th column -> Color Green
    9th - 10th -> Color Red etc.
    Also, in the Analysis Web Item properties, the values are:
    BLOCK_COLUMN_SIZE = 50
    BLOCK_COLUMNS_STEP_SIZE = 1
    BLOCK_ROWS_SIZE = 1000
    BLOCK_ROWS_STEP_SIZE = 0
    My Issue: For all columns , a few of the Cells are not getting colured. They are absolutely random.
    When I reduce the data volume (restrict to some region), all the columns are properly colured.
    Please Help to fix the issue.
    Thanks,
    Mainak

    Closing the thread as seems below note answers my query:
    1648692  Modification Format styles not applied on huge result set
    Thanks,
    Mainak

  • All fields are not displayed in SM30

    Dear All,
    I have created one Z-Table with 5 fields. For that Z-Table I have maintained table maintenance generator. Now in SM30 I am able to see only 3 fields, I have checked all the options but I am not able to find out what is the problem that 2 fields are not getting displayed.
    Please tell me what might be the issue?
    warm regards,
    nishu

    HI,
    While generating the TM there is oneoption which can disable some fields in sm30.
    I think they may be the reason in your case.
    regards,

  • All fields are not displaying in the infotype screen control

    Hello Everybody,
    All the fields from infotype 2001 and 2002 are not getting displayed in the screen control for these infotypes and
    when I checked the screens for these infotypes, the mod. groups/functions has not been set for field 'Group3' for those
    infotype fields.
    Is there a way I could set this field ' Group3' for these infotype fields also ? Can it be done thru screen exit and if yes could
    anyone tell me what's the screen exit for these infotypes ?
    Thanks
    Alok

    solved it myself.

  • All items are not visible even with no filter

    I have a custom list and am not able to run a search the list, through the "all items" view, even with no filter set.  The list is also set to only view 50 items at a time, but I am not able to view the next batch of items.  The search
    will give no results even when the list contains the item with that specific information.

    Hi,
    1) I understand you are not able to view the 'All Items' in the list.
    Can you check the total number of items that list contains.
    Go to Site Actions-->View All site content see the number of items beside the list name( right side)
    I suspect the list might be reached the threshold value.
    2) If the number of Items are less than the threshold value then I would suggest you do a  test by creating another view by providing only the view name (Don't use any sort, Filter, Groupby ...etc) and just keep the default settings and let me
    know if you are able to see the items using the newly created view.
    ****************************************************************************************** Please remember to mark your question as answered &Vote helpful, if this solves/helps your problem.
    s p kumar

Maybe you are looking for