All tests print out fine, but all other print jobs get caught in printer as the page exits printer
I have a HP Photosmart D110 printer. Can't print out anything - except tests - without the page getting chewed up on left corner as it exits the printer.
JoanP
Hi you can try the steps on this video
http://h30460.www3.hp.com/?rf=sitemap&fr_story=0d22534555a7583162469f89904ab9e0345bf9ca&jumpid=reg_R...
its a general solution but if after this the issue persist contact HP for a warranty replacement just take note on the steps that you performed so you will not have to do them again
Similar Messages
-
How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?
Try reset all settings.
Settings > General > Reset > Reset all settings. It won't delete any data. -
When i turn on my Ipad air In the corners of the Black Screen It has white stuff near the top bottom left and Right When it's all it turned on it's fine But when I go to a black Background It does the Same is this normal
It
I
Owhen I turn on my ipad and the black screen comes on I have a slight white light running along the bottom meaning the whole screen is not black. Is ths normal.
better details Sorry
N -
I used to be able to print labels for burned CDs with the cover being the playlist name and the other side the song titles...now the titles print out compacted, overlapping each other and illegible. I thought it was the printer but it happened w/1 other printer as well, which I used before for this exact thing w/no problem.
Try cleaning the print head with rubbing alcohol wipe, then replace your print head. Keep pushing the Ok.
Go to this link and HP shows you how.
support.hp.com/us-en/document/c01643079
Lucky for me it worked! -
i am unable to configure my ipad 2 with my existing wifi of linksys though I have entered the all ip address as per my laptop but still I am not getting thru network kindly suggest the solution
The ip-adress cannot be the same as your laptop. You have to make sure that your ip-adress is unique in the network. if your ip is 192.168.1.100 try 192.168.1.112 or somthing. More advanced is to check avalible adress in your router.
-
iPhone 5 got wet. Dried it out, booted up fine but now there is a coding message that appears on the boot up screeen
More than likely moisture damage.
-
can anyone help me with this, i was tring to set up my sons i tunes account on his ipod. I used my tablet to do this his was done fine but my others sons ipod is locked up now with a picture of a usb cord and i tune symbol i was not trying to put it on his it just locked it up. can anyone help
Do as the image on the screen implies.
Connect the device to a computer running iTunes and restore. -
From my Ipad, when I am in Facebook, I can not hear the videos posted to my FB page...Sounds works on all other apps just not my videos on my FB page.
Homesharing has issues that have not been fixed over several versions of itunes and ios.
Only kind of fix is go back through your library and retag it. -
I rented a movie on my iPad. It downloaded fine but would only play 36 minutes, 5 seconds worth of the movie; although the time kept running for the length of the movie. Can this be fixed or do I need to get a refund?
You can try a rest:
Reset iPad: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- If that does work, contact iTunes and request a redownload. You can ask for a refund though. -
I have completed a song on the GarageBand app which plays fine. I export it via email and it opens up in iTunes on my PC fine but when you play it there is no sound from the file. Anyone know I am doing wrong please?
you might need codecs on you pc. i find vlc player and codecs is perfect for music and videos.
-
I can open some older numbers files but not other. I get a message saying I need a new version of numbers. Why would some files open and not others?
SK,
Here's the deal. If you ever open a Numbers file with Version 3, the file is converted to Version 3 and can't be opened again by Version 2. Version 2 and Version 3 are undoubtedly both on your machine and they look so similar that you may not realize which you are using. So, there are two steps to getting into trouble.
1. Open a Numbers 2 file with Numbers 3, edit it and Close it.
2. Try to open that file with Version 2. You ill get the error.
To always get it right, find the file you want to open in Finder, Right-Click it and choose Open With... and pick Version 3 from the drop down list.
If you have a file that you prefer to use only in Version 2, always use Open with... Numbers 2.3.
Jerry -
I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green. I've tried going through my new MacBook Pro settings and it the diagnostics check, it says network changes detected, I tell it that it "yes" does connect to a cable modem, it tells me to restart it, after I do it asks if there are any other devices hooked up ( firewall) and when I say no it tells me that it can't fix the problem.
Now I know that I probably have a new IP address because of the cable company switching the boxes but it was working fine with the other box, now there isn't a signal to be had on it!
Please anybody out there that can help!!!??Any time you change networking hardware it is always a good idea to perform a complete power recycle with the new equipment. Check out the following AirPort User Tip. Please post back your results.
-
Hi guys, I want to sync my Pages program to iCloud but haven't got an option to do so in the pages program. Instead there is only iWork. I think I have the updated version its, 4.1 (923) do i have to update my version or should it work?
I think you mean "there is only iWork.com". iWork is the name of the 3 software programs. iWork.com is a web site.
You can use iWork.com till 1 August. (Apple is shutting down iWork.com from 1 August.) After that date you'll have to use iCloud, though it's available now to use. See Re: How to upload a document to iCloud from Mac?
NB This process is a bit clumsy. Apple have said they'll be improving iCloud in OS X Mountain Lion. But this new version of OS X won't be available till end of summer (or winter if you're in the other hemisphere).
Note also that iCloud only syncs documents between your devices. It doesn't share documents with others. If you need to do this you should consider another service like DropBox, Google Drive or Microsoft Skydrive. -
Just upgraded my old iWeb app to version 3.0.4 from an iLife 11 disk. I like some of the newer features but it seems to have one glitch: when I upload the pages to my ftp server, the automatic navigation bar at the top of the page disappears. Any ideas? Thanks.
Looks like a couple scripts are missing:
If you republish the entire site iWeb should recreate these for you...
I don't use the built-in navigation. I usually just create my own:
http://jeffnitschke.com/Home.html -
I am using ipad 2, Wi-Fi is connected but cant open any web-site " error : safari cannot open the page becasue it is not connected to the internet "
need support pleaseYou haven't provided much information, such as what type of router you have? If you entered the encryption key as the password as opposed to the router name you have selected? If you have WEP or WPA? What you've tried that didn't work, other than saying it doesn't work? So, below is a link to some assistance. Follow this and see if it helps you.........
http://www.apple.com/support/ipad/assistant/wifi/ -
I can only repeat: I Bought PE 13, installation and registration OK. Want to access 'Help / first steps'...(as well as the other options): always get message: no connection to the Internet. Which is obviously not true!!
hakune
P.S. the way to get through to be able to post my problem is not very userfriendly.Pe won't contact net please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve the connection error between the computer and our activation servers.
Maybe you are looking for
-
Truncation of leading Zeros when Down Loading into Excel - OLE Objects
Hi, Can any one help me on this. I am using <b>OLE Objects</b> to download Data into Excel Sheet. Data with leading Zeros is getting truncated in Excel. Ex: Report Output is showing Plant Number as 0002. But when i am downloading to Excel Plant value
-
Storing and converting videos and slideshows (Mac OS)
hi all, new user here. i have a host of files with some coming from my PC days and am currently using Aperture to store and create m4v and mov files. right now i have AVI, mpg, mp4, PDF etcetera etcetera that i am trying to organize. when i doublecli
-
Since installing OS X Mavericks, automatic updates keep producing download demand for Command Line Developer tools 6.0 and 6.1. I don't need these but cannot seem to stop the updates available, even if they are downloaded and installed. Can anyone
-
How do I disable "reopen windows when logging back in"
Everytime I shutdown the mac asks me "reopen windows when logging back in". In fact the default is to do reopen all open programs when I restart. he annoying thing with apple is that when you close a window like Safari and iPhoto the program itself i
-
Starting, but not starting since turned on FileVault, installed Mac Office
Guys, I need you! My iBook, Dual USB G3 is acting up. I have never had any problems with it. I recently took all my itunes off, so I freed up like 8 gig of space. She was whirring along quicker than ever. I bought Mac Office and installed it. I also